Commit 86e09287 authored by Alexander Holler's avatar Alexander Holler Committed by Gustavo F. Padovan

Bluetooth: ath3k: reduce memory usage

There is no need to hold the firmware in memory.
Signed-off-by: default avatarAlexander Holler <holler@ahsoftware.de>
Signed-off-by: default avatarGustavo F. Padovan <padovan@profusion.mobi>
parent 38d59392
......@@ -47,46 +47,40 @@ MODULE_DEVICE_TABLE(usb, ath3k_table);
#define USB_REQ_DFU_DNLOAD 1
#define BULK_SIZE 4096
struct ath3k_data {
struct usb_device *udev;
u8 *fw_data;
u32 fw_size;
u32 fw_sent;
};
static int ath3k_load_firmware(struct ath3k_data *data,
unsigned char *firmware,
int count)
static int ath3k_load_firmware(struct usb_device *udev,
const struct firmware *firmware)
{
u8 *send_buf;
int err, pipe, len, size, sent = 0;
int count = firmware->size;
BT_DBG("ath3k %p udev %p", data, data->udev);
BT_DBG("udev %p", udev);
pipe = usb_sndctrlpipe(data->udev, 0);
pipe = usb_sndctrlpipe(udev, 0);
if ((usb_control_msg(data->udev, pipe,
send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
if (!send_buf) {
BT_ERR("Can't allocate memory chunk for firmware");
return -ENOMEM;
}
memcpy(send_buf, firmware->data, 20);
if ((err = usb_control_msg(udev, pipe,
USB_REQ_DFU_DNLOAD,
USB_TYPE_VENDOR, 0, 0,
firmware, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
BT_ERR("Can't change to loading configuration err");
return -EBUSY;
goto error;
}
sent += 20;
count -= 20;
send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
if (!send_buf) {
BT_ERR("Can't allocate memory chunk for firmware");
return -ENOMEM;
}
while (count) {
size = min_t(uint, count, BULK_SIZE);
pipe = usb_sndbulkpipe(data->udev, 0x02);
memcpy(send_buf, firmware + sent, size);
pipe = usb_sndbulkpipe(udev, 0x02);
memcpy(send_buf, firmware->data + sent, size);
err = usb_bulk_msg(data->udev, pipe, send_buf, size,
err = usb_bulk_msg(udev, pipe, send_buf, size,
&len, 3000);
if (err || (len != size)) {
......@@ -112,57 +106,28 @@ static int ath3k_probe(struct usb_interface *intf,
{
const struct firmware *firmware;
struct usb_device *udev = interface_to_usbdev(intf);
struct ath3k_data *data;
int size;
BT_DBG("intf %p id %p", intf, id);
if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
return -ENODEV;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->udev = udev;
if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) {
kfree(data);
return -EIO;
}
size = max_t(uint, firmware->size, 4096);
data->fw_data = kmalloc(size, GFP_KERNEL);
if (!data->fw_data) {
if (ath3k_load_firmware(udev, firmware)) {
release_firmware(firmware);
kfree(data);
return -ENOMEM;
}
memcpy(data->fw_data, firmware->data, firmware->size);
data->fw_size = firmware->size;
data->fw_sent = 0;
release_firmware(firmware);
usb_set_intfdata(intf, data);
if (ath3k_load_firmware(data, data->fw_data, data->fw_size)) {
usb_set_intfdata(intf, NULL);
kfree(data->fw_data);
kfree(data);
return -EIO;
}
release_firmware(firmware);
return 0;
}
static void ath3k_disconnect(struct usb_interface *intf)
{
struct ath3k_data *data = usb_get_intfdata(intf);
BT_DBG("ath3k_disconnect intf %p", intf);
kfree(data->fw_data);
kfree(data);
}
static struct usb_driver ath3k_driver = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment