Commit 87a18a6a authored by Chaotian Jing's avatar Chaotian Jing Committed by Ulf Hansson

mmc: mmc: Use ->card_busy() to detect busy cards in __mmc_switch()

Some MMC hosts do not support MMC_CAP_WAIT_WHILE_BUSY, but implements the
->card_busy() callback. In such cases, extend __mmc_switch() to use this
method to check card status after switch command.
Signed-off-by: default avatarChaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent e613cc47
......@@ -480,6 +480,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
u32 status = 0;
bool use_r1b_resp = use_busy_signal;
bool expired = false;
bool busy = false;
mmc_retune_hold(host);
......@@ -535,19 +536,24 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
/* Must check status to be sure of no errors. */
timeout = jiffies + msecs_to_jiffies(timeout_ms);
do {
/*
* Due to the possibility of being preempted after
* sending the status command, check the expiration
* time first.
*/
expired = time_after(jiffies, timeout);
if (send_status) {
/*
* Due to the possibility of being preempted after
* sending the status command, check the expiration
* time first.
*/
expired = time_after(jiffies, timeout);
err = __mmc_send_status(card, &status, ignore_crc);
if (err)
goto out;
}
if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
break;
if (host->ops->card_busy) {
if (!host->ops->card_busy(host))
break;
busy = true;
}
if (mmc_host_is_spi(host))
break;
......@@ -556,19 +562,20 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
* does'nt support MMC_CAP_WAIT_WHILE_BUSY, then we can only
* rely on waiting for the stated timeout to be sufficient.
*/
if (!send_status) {
if (!send_status && !host->ops->card_busy) {
mmc_delay(timeout_ms);
goto out;
}
/* Timeout if the device never leaves the program state. */
if (expired && R1_CURRENT_STATE(status) == R1_STATE_PRG) {
if (expired &&
(R1_CURRENT_STATE(status) == R1_STATE_PRG || busy)) {
pr_err("%s: Card stuck in programming state! %s\n",
mmc_hostname(host), __func__);
err = -ETIMEDOUT;
goto out;
}
} while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
} while (R1_CURRENT_STATE(status) == R1_STATE_PRG || busy);
err = mmc_switch_status_error(host, status);
out:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment