Commit 87b7c3ac authored by Keerthy's avatar Keerthy Committed by Santosh Shilimkar

ARM: dts: keystone-k2g: Add gpio nodes

66AK2G has 2 instances of gpio. The first one has all the 144 GPIOs
functional. 9 banks with 16 gpios making a total of 144. The second
instance has only the GPIO0:GPIO67 functional and rest are marked
reserved.
Signed-off-by: default avatarKeerthy <j-keerthy@ti.com>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarSantosh Shilimkar <ssantosh@kernel.org>
parent 93c1fc3b
......@@ -15,6 +15,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/keystone.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "ti,k2g","ti,keystone";
......@@ -168,5 +169,46 @@ k2g_reset: reset-controller {
#reset-cells = <2>;
};
};
gpio0: gpio@2603000 {
compatible = "ti,k2g-gpio", "ti,keystone-gpio";
reg = <0x02603000 0x100>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <144>;
ti,davinci-gpio-unbanked = <0>;
clocks = <&k2g_clks 0x001b 0x0>;
clock-names = "gpio";
};
gpio1: gpio@260a000 {
compatible = "ti,k2g-gpio", "ti,keystone-gpio";
reg = <0x0260a000 0x100>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 443 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 444 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 445 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 446 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <68>;
ti,davinci-gpio-unbanked = <0>;
clocks = <&k2g_clks 0x001c 0x0>;
clock-names = "gpio";
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment