Commit 881bcabb authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Setup CROSS_COMPILE at the top
  m68k: Correct the Atari ALLOWINT definition
  m68k/video: Create <asm/vga.h>
  m68k: Make sure {read,write}s[bwl]() are always defined
  m68k/mm: Port OOM changes to do_page_fault()
  scsi/atari: Make more functions static
  scsi/atari: Revive "atascsi=" setup option
  net/ariadne: Improve debug prints
  m68k/atari: Change VME irq numbers from unsigned long to unsigned int
  m68k/amiga: Use arch_initcall() for registering platform devices
  m68k/amiga: Add error checks when registering platform devices
  m68k/amiga: Mark z_dev_present() __init
  m68k: Remove unused MAX_NOINT_IPL definition
parents e60b9a03 f25e918e
......@@ -16,6 +16,13 @@
KBUILD_DEFCONFIG := multi_defconfig
ifneq ($(SUBARCH),$(ARCH))
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(call cc-cross-prefix, \
m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
endif
endif
#
# Enable processor type. Ordering of these is important - we want to
# use the minimum processor type of the range we support. The logic
......@@ -62,12 +69,6 @@ endif
LDFLAGS := -m m68kelf
KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
ifneq ($(SUBARCH),$(ARCH))
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(call cc-cross-prefix, \
m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
endif
endif
ifdef CONFIG_SUN3
LDFLAGS_vmlinux = -N
......
......@@ -6,6 +6,7 @@
* for more details.
*/
#include <linux/err.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/zorro.h>
......@@ -46,18 +47,25 @@ static const struct resource zorro_resources[] __initconst = {
static int __init amiga_init_bus(void)
{
struct platform_device *pdev;
unsigned int n;
if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(ZORRO))
return -ENODEV;
platform_device_register_simple("amiga-zorro", -1, zorro_resources,
AMIGAHW_PRESENT(ZORRO3) ? 4 : 2);
n = AMIGAHW_PRESENT(ZORRO3) ? 4 : 2;
pdev = platform_device_register_simple("amiga-zorro", -1,
zorro_resources, n);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
return 0;
}
subsys_initcall(amiga_init_bus);
static int z_dev_present(zorro_id id)
static int __init z_dev_present(zorro_id id)
{
unsigned int i;
......@@ -126,72 +134,122 @@ static const struct resource amiga_rtc_resource __initconst = {
static int __init amiga_init_devices(void)
{
struct platform_device *pdev;
int error;
if (!MACH_IS_AMIGA)
return -ENODEV;
/* video hardware */
if (AMIGAHW_PRESENT(AMI_VIDEO))
platform_device_register_simple("amiga-video", -1, NULL, 0);
if (AMIGAHW_PRESENT(AMI_VIDEO)) {
pdev = platform_device_register_simple("amiga-video", -1, NULL,
0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
}
/* sound hardware */
if (AMIGAHW_PRESENT(AMI_AUDIO))
platform_device_register_simple("amiga-audio", -1, NULL, 0);
if (AMIGAHW_PRESENT(AMI_AUDIO)) {
pdev = platform_device_register_simple("amiga-audio", -1, NULL,
0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
}
/* storage interfaces */
if (AMIGAHW_PRESENT(AMI_FLOPPY))
platform_device_register_simple("amiga-floppy", -1, NULL, 0);
if (AMIGAHW_PRESENT(AMI_FLOPPY)) {
pdev = platform_device_register_simple("amiga-floppy", -1,
NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
}
if (AMIGAHW_PRESENT(A3000_SCSI))
platform_device_register_simple("amiga-a3000-scsi", -1,
&a3000_scsi_resource, 1);
if (AMIGAHW_PRESENT(A3000_SCSI)) {
pdev = platform_device_register_simple("amiga-a3000-scsi", -1,
&a3000_scsi_resource, 1);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
}
if (AMIGAHW_PRESENT(A4000_SCSI))
platform_device_register_simple("amiga-a4000t-scsi", -1,
&a4000t_scsi_resource, 1);
if (AMIGAHW_PRESENT(A4000_SCSI)) {
pdev = platform_device_register_simple("amiga-a4000t-scsi", -1,
&a4000t_scsi_resource,
1);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
}
if (AMIGAHW_PRESENT(A1200_IDE) ||
z_dev_present(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE)) {
pdev = platform_device_register_simple("amiga-gayle-ide", -1,
&a1200_ide_resource, 1);
platform_device_add_data(pdev, &a1200_ide_pdata,
sizeof(a1200_ide_pdata));
if (IS_ERR(pdev))
return PTR_ERR(pdev);
error = platform_device_add_data(pdev, &a1200_ide_pdata,
sizeof(a1200_ide_pdata));
if (error)
return error;
}
if (AMIGAHW_PRESENT(A4000_IDE)) {
pdev = platform_device_register_simple("amiga-gayle-ide", -1,
&a4000_ide_resource, 1);
platform_device_add_data(pdev, &a4000_ide_pdata,
sizeof(a4000_ide_pdata));
if (IS_ERR(pdev))
return PTR_ERR(pdev);
error = platform_device_add_data(pdev, &a4000_ide_pdata,
sizeof(a4000_ide_pdata));
if (error)
return error;
}
/* other I/O hardware */
if (AMIGAHW_PRESENT(AMI_KEYBOARD))
platform_device_register_simple("amiga-keyboard", -1, NULL, 0);
if (AMIGAHW_PRESENT(AMI_KEYBOARD)) {
pdev = platform_device_register_simple("amiga-keyboard", -1,
NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
}
if (AMIGAHW_PRESENT(AMI_MOUSE))
platform_device_register_simple("amiga-mouse", -1, NULL, 0);
if (AMIGAHW_PRESENT(AMI_MOUSE)) {
pdev = platform_device_register_simple("amiga-mouse", -1, NULL,
0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
}
if (AMIGAHW_PRESENT(AMI_SERIAL))
platform_device_register_simple("amiga-serial", -1, NULL, 0);
if (AMIGAHW_PRESENT(AMI_SERIAL)) {
pdev = platform_device_register_simple("amiga-serial", -1,
NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
}
if (AMIGAHW_PRESENT(AMI_PARALLEL))
platform_device_register_simple("amiga-parallel", -1, NULL, 0);
if (AMIGAHW_PRESENT(AMI_PARALLEL)) {
pdev = platform_device_register_simple("amiga-parallel", -1,
NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
}
/* real time clocks */
if (AMIGAHW_PRESENT(A2000_CLK))
platform_device_register_simple("rtc-msm6242", -1,
&amiga_rtc_resource, 1);
if (AMIGAHW_PRESENT(A2000_CLK)) {
pdev = platform_device_register_simple("rtc-msm6242", -1,
&amiga_rtc_resource, 1);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
}
if (AMIGAHW_PRESENT(A3000_CLK))
platform_device_register_simple("rtc-rp5c01", -1,
&amiga_rtc_resource, 1);
if (AMIGAHW_PRESENT(A3000_CLK)) {
pdev = platform_device_register_simple("rtc-rp5c01", -1,
&amiga_rtc_resource, 1);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
}
return 0;
}
device_initcall(amiga_init_devices);
arch_initcall(amiga_init_devices);
......@@ -206,7 +206,7 @@ void __init atari_init_IRQ(void)
* hardware with a programmable int vector (probably a VME board).
*/
unsigned long atari_register_vme_int(void)
unsigned int atari_register_vme_int(void)
{
int i;
......@@ -223,7 +223,7 @@ unsigned long atari_register_vme_int(void)
EXPORT_SYMBOL(atari_register_vme_int);
void atari_unregister_vme_int(unsigned long irq)
void atari_unregister_vme_int(unsigned int irq)
{
if (irq >= VME_SOURCE_BASE && irq < VME_SOURCE_BASE + VME_MAX_SOURCES) {
irq -= VME_SOURCE_BASE;
......
......@@ -198,7 +198,7 @@ static inline int atari_irq_pending( unsigned irq )
return( get_mfp_bit( irq, MFP_PENDING ) );
}
unsigned long atari_register_vme_int( void );
void atari_unregister_vme_int( unsigned long );
unsigned int atari_register_vme_int(void);
void atari_unregister_vme_int(unsigned int);
#endif /* linux/atariints.h */
......@@ -33,13 +33,11 @@
/* the following macro is used when enabling interrupts */
#if defined(MACH_ATARI_ONLY)
/* block out HSYNC on the atari */
#define ALLOWINT (~0x400)
#define MAX_NOINT_IPL 3
/* block out HSYNC = ipl 2 on the atari */
#define ALLOWINT (~0x500)
#else
/* portable version */
#define ALLOWINT (~0x700)
#define MAX_NOINT_IPL 0
#endif /* machine compilation types */
#ifdef __ASSEMBLY__
......
......@@ -278,6 +278,13 @@ static inline void isa_delay(void)
#define readl(addr) in_le32(addr)
#define writel(val,addr) out_le32((addr),(val))
#define readsb(port, buf, nr) raw_insb((port), (u8 *)(buf), (nr))
#define readsw(port, buf, nr) raw_insw((port), (u16 *)(buf), (nr))
#define readsl(port, buf, nr) raw_insl((port), (u32 *)(buf), (nr))
#define writesb(port, buf, nr) raw_outsb((port), (u8 *)(buf), (nr))
#define writesw(port, buf, nr) raw_outsw((port), (u16 *)(buf), (nr))
#define writesl(port, buf, nr) raw_outsl((port), (u32 *)(buf), (nr))
#define mmiowb()
static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
......
#ifndef _ASM_M68K_VGA_H
#define _ASM_M68K_VGA_H
#include <asm/raw_io.h>
/*
* FIXME
* Ugh, we don't have PCI space, so map readb() and friends to use raw I/O
* accessors, which are identical to the z_*() Zorro bus accessors.
* This should make cirrusfb work again on Amiga
*/
#undef inb_p
#undef inw_p
#undef outb_p
#undef outw
#undef readb
#undef writeb
#undef writew
#define inb_p(port) 0
#define inw_p(port) 0
#define outb_p(port, val) do { } while (0)
#define outw(port, val) do { } while (0)
#define readb raw_inb
#define writeb raw_outb
#define writew raw_outw
#endif /* _ASM_M68K_VGA_H */
......@@ -72,7 +72,8 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
{
struct mm_struct *mm = current->mm;
struct vm_area_struct * vma;
int write, fault;
int fault;
unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
#ifdef DEBUG
printk ("do page fault:\nregs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld, %p\n",
......@@ -87,6 +88,7 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
if (in_atomic() || !mm)
goto no_context;
retry:
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
......@@ -117,14 +119,13 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
#ifdef DEBUG
printk("do_page_fault: good_area\n");
#endif
write = 0;
switch (error_code & 3) {
default: /* 3: write, present */
/* fall through */
case 2: /* write, not present */
if (!(vma->vm_flags & VM_WRITE))
goto acc_err;
write++;
flags |= FAULT_FLAG_WRITE;
break;
case 1: /* read, present */
goto acc_err;
......@@ -139,10 +140,14 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
* the fault.
*/
fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
fault = handle_mm_fault(mm, vma, address, flags);
#ifdef DEBUG
printk("handle_mm_fault returns %d\n",fault);
#endif
if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
return 0;
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
goto out_of_memory;
......@@ -150,10 +155,31 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
goto bus_err;
BUG();
}
if (fault & VM_FAULT_MAJOR)
current->maj_flt++;
else
current->min_flt++;
/*
* Major/minor page fault accounting is only done on the
* initial attempt. If we go through a retry, it is extremely
* likely that the page will be found in page cache at that point.
*/
if (flags & FAULT_FLAG_ALLOW_RETRY) {
if (fault & VM_FAULT_MAJOR)
current->maj_flt++;
else
current->min_flt++;
if (fault & VM_FAULT_RETRY) {
/* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
* of starvation. */
flags &= ~FAULT_FLAG_ALLOW_RETRY;
/*
* No need to up_read(&mm->mmap_sem) as we would
* have already released it in __lock_page_or_retry
* in mm/filemap.c.
*/
goto retry;
}
}
up_read(&mm->mmap_sem);
return 0;
......
......@@ -213,10 +213,10 @@ static int ariadne_rx(struct net_device *dev)
(const void *)priv->rx_buff[entry],
pkt_len);
skb->protocol = eth_type_trans(skb, dev);
netdev_dbg(dev, "RX pkt type 0x%04x from %pM to %pM data 0x%08x len %d\n",
netdev_dbg(dev, "RX pkt type 0x%04x from %pM to %pM data %p len %u\n",
((u_short *)skb->data)[6],
skb->data + 6, skb->data,
(int)skb->data, (int)skb->len);
skb->data, skb->len);
netif_rx(skb);
dev->stats.rx_packets++;
......@@ -566,10 +566,10 @@ static netdev_tx_t ariadne_start_xmit(struct sk_buff *skb,
/* Fill in a Tx ring entry */
netdev_dbg(dev, "TX pkt type 0x%04x from %pM to %pM data 0x%08x len %d\n",
netdev_dbg(dev, "TX pkt type 0x%04x from %pM to %pM data %p len %u\n",
((u_short *)skb->data)[6],
skb->data + 6, skb->data,
(int)skb->data, (int)skb->len);
skb->data, skb->len);
local_irq_save(flags);
......
......@@ -558,21 +558,18 @@ static unsigned long __init lance_probe1( struct net_device *dev,
printk( "Lance: request for irq %d failed\n", IRQ_AUTO_5 );
return 0;
}
dev->irq = (unsigned short)IRQ_AUTO_5;
dev->irq = IRQ_AUTO_5;
}
else {
/* For VME-RieblCards, request a free VME int;
* (This must be unsigned long, since dev->irq is short and the
* IRQ_MACHSPEC bit would be cut off...)
*/
unsigned long irq = atari_register_vme_int();
/* For VME-RieblCards, request a free VME int */
unsigned int irq = atari_register_vme_int();
if (!irq) {
printk( "Lance: request for VME interrupt failed\n" );
return 0;
}
if (request_irq(irq, lance_interrupt, IRQ_TYPE_PRIO,
"Riebl-VME Ethernet", dev)) {
printk( "Lance: request for irq %ld failed\n", irq );
printk( "Lance: request for irq %u failed\n", irq );
return 0;
}
dev->irq = irq;
......
......@@ -572,7 +572,7 @@ static void falcon_get_lock(void)
}
int __init atari_scsi_detect(struct scsi_host_template *host)
static int __init atari_scsi_detect(struct scsi_host_template *host)
{
static int called = 0;
struct Scsi_Host *instance;
......@@ -724,7 +724,7 @@ int __init atari_scsi_detect(struct scsi_host_template *host)
return 1;
}
int atari_scsi_release(struct Scsi_Host *sh)
static int atari_scsi_release(struct Scsi_Host *sh)
{
if (IS_A_TT())
free_irq(IRQ_TT_MFP_SCSI, sh);
......@@ -734,17 +734,21 @@ int atari_scsi_release(struct Scsi_Host *sh)
return 1;
}
void __init atari_scsi_setup(char *str, int *ints)
#ifndef MODULE
static int __init atari_scsi_setup(char *str)
{
/* Format of atascsi parameter is:
* atascsi=<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
* Defaults depend on TT or Falcon, hostid determined at run time.
* Negative values mean don't change.
*/
int ints[6];
get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] < 1) {
printk("atari_scsi_setup: no arguments!\n");
return;
return 0;
}
if (ints[0] >= 1) {
......@@ -777,9 +781,14 @@ void __init atari_scsi_setup(char *str, int *ints)
setup_use_tagged_queuing = !!ints[5];
}
#endif
return 1;
}
int atari_scsi_bus_reset(Scsi_Cmnd *cmd)
__setup("atascsi=", atari_scsi_setup);
#endif /* !MODULE */
static int atari_scsi_bus_reset(Scsi_Cmnd *cmd)
{
int rv;
struct NCR5380_hostdata *hostdata =
......@@ -852,7 +861,7 @@ static void __init atari_scsi_reset_boot(void)
#endif
const char *atari_scsi_info(struct Scsi_Host *host)
static const char *atari_scsi_info(struct Scsi_Host *host)
{
/* atari_scsi_detect() is verbose enough... */
static const char string[] = "Atari native SCSI";
......@@ -862,8 +871,9 @@ const char *atari_scsi_info(struct Scsi_Host *host)
#if defined(REAL_DMA)
unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance, void *data,
unsigned long count, int dir)
static unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance,
void *data, unsigned long count,
int dir)
{
unsigned long addr = virt_to_phys(data);
......
......@@ -18,11 +18,6 @@
/* (I_HAVE_OVERRUNS stuff removed) */
#ifndef ASM
int atari_scsi_detect (struct scsi_host_template *);
const char *atari_scsi_info (struct Scsi_Host *);
int atari_scsi_reset (Scsi_Cmnd *, unsigned int);
int atari_scsi_release (struct Scsi_Host *);
/* The values for CMD_PER_LUN and CAN_QUEUE are somehow arbitrary. Higher
* values should work, too; try it! (but cmd_per_lun costs memory!) */
......
......@@ -40,7 +40,7 @@
#if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \
&& !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \
&& !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN) \
&& !defined(CONFIG_MIPS)
&& !defined(CONFIG_MIPS) && !defined(CONFIG_M68K)
static inline void readsl(const void __iomem *addr, void *buf, int len)
{ insl((unsigned long)addr, buf, len); }
static inline void readsw(const void __iomem *addr, void *buf, int len)
......
......@@ -19,29 +19,7 @@
#include <linux/types.h>
#include <asm/io.h>
#ifndef CONFIG_AMIGA
#include <asm/vga.h>
#else
/*
* FIXME
* Ugh, we don't have PCI space, so map readb() and friends to use Zorro space
* for MMIO accesses. This should make cirrusfb work again on Amiga
*/
#undef inb_p
#undef inw_p
#undef outb_p
#undef outw
#undef readb
#undef writeb
#undef writew
#define inb_p(port) 0
#define inw_p(port) 0
#define outb_p(port, val) do { } while (0)
#define outw(port, val) do { } while (0)
#define readb z_readb
#define writeb z_writeb
#define writew z_writew
#endif
#include <asm/byteorder.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment