net-next: dt-binding: dwmac-mediatek: add more description for RMII

MT2712 SoC can provide RMII reference clock,
so add corresponding description in dt-binding.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/mediatek-dwmac.txt

@@ -14,7 +14,7 @@ Required properties:
 	Should be "macirq" for the main MAC IRQ
 - clocks: Must contain a phandle for each entry in clock-names.
 - clock-names: The name of the clock listed in the clocks property. These are
-	"axi", "apb", "mac_main", "ptp_ref" for MT2712 SoC
+	"axi", "apb", "mac_main", "ptp_ref", "rmii_internal" for MT2712 SoC.
 - mac-address: See ethernet.txt in the same directory
 - phy-mode: See ethernet.txt in the same directory
 - mediatek,pericfg: A phandle to the syscon node that control ethernet
@@ -23,8 +23,10 @@ Required properties:
 Optional properties:
 - mediatek,tx-delay-ps: TX clock delay macro value. Default is 0.
 	It should be defined for RGMII/MII interface.
+	It should be defined for RMII interface when the reference clock is from MT2712 SoC.
 - mediatek,rx-delay-ps: RX clock delay macro value. Default is 0.
-	It should be defined for RGMII/MII/RMII interface.
+	It should be defined for RGMII/MII interface.
+	It should be defined for RMII interface.
 Both delay properties need to be a multiple of 170 for RGMII interface,
 or will round down. Range 0~31*170.
 Both delay properties need to be a multiple of 550 for MII/RMII interface,
@@ -34,13 +36,20 @@ or will round down. Range 0~31*550.
 	reference clock, which is from external PHYs, is connected to RXC pin
 	on MT2712 SoC.
 	Otherwise, is connected to TXC pin.
+- mediatek,rmii-clk-from-mac: boolean property, if present indicates that
+	MT2712 SoC provides the RMII reference clock, which outputs to TXC pin only.
 - mediatek,txc-inverse: boolean property, if present indicates that
 	1. tx clock will be inversed in MII/RGMII case,
 	2. tx clock inside MAC will be inversed relative to reference clock
 	   which is from external PHYs in RMII case, and it rarely happen.
+	3. the reference clock, which outputs to TXC pin will be inversed in RMII case
+	   when the reference clock is from MT2712 SoC.
 - mediatek,rxc-inverse: boolean property, if present indicates that
 	1. rx clock will be inversed in MII/RGMII case.
-	2. reference clock will be inversed when arrived at MAC in RMII case.
+	2. reference clock will be inversed when arrived at MAC in RMII case, when
+	   the reference clock is from external PHYs.
+	3. the inside clock, which be sent to MAC, will be inversed in RMII case when
+	   the reference clock is from MT2712 SoC.
 - assigned-clocks: mac_main and ptp_ref clocks
 - assigned-clock-parents: parent clocks of the assigned clocks
 
@@ -50,29 +59,33 @@ Example:
 		reg = <0 0x1101c000 0 0x1300>;
 		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "macirq";
-		phy-mode ="rgmii";
+		phy-mode ="rgmii-rxid";
 		mac-address = [00 55 7b b5 7d f7];
 		clock-names = "axi",
 			      "apb",
 			      "mac_main",
 			      "ptp_ref",
-			      "ptp_top";
+			      "rmii_internal";
 		clocks = <&pericfg CLK_PERI_GMAC>,
 			 <&pericfg CLK_PERI_GMAC_PCLK>,
 			 <&topckgen CLK_TOP_ETHER_125M_SEL>,
-			 <&topckgen CLK_TOP_ETHER_50M_SEL>;
+			 <&topckgen CLK_TOP_ETHER_50M_SEL>,
+			 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
 		assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
-				  <&topckgen CLK_TOP_ETHER_50M_SEL>;
+				  <&topckgen CLK_TOP_ETHER_50M_SEL>,
+				  <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
 		assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
-					 <&topckgen CLK_TOP_APLL1_D3>;
+					 <&topckgen CLK_TOP_APLL1_D3>,
+					 <&topckgen CLK_TOP_ETHERPLL_50M>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
 		mediatek,pericfg = <&pericfg>;
 		mediatek,tx-delay-ps = <1530>;
 		mediatek,rx-delay-ps = <1530>;
 		mediatek,rmii-rxc;
 		mediatek,txc-inverse;
 		mediatek,rxc-inverse;
-		snps,txpbl = <32>;
-		snps,rxpbl = <32>;
+		snps,txpbl = <1>;
+		snps,rxpbl = <1>;
 		snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
 		snps,reset-active-low;
 	};