drivers/net/ethernet/*: Enabled vendor Kconfig options

Based on finds for Stephen Rothwell, where current defconfig's
enable a ethernet driver and it is not compiled due to the newly
added NET_VENDOR_* component of Kconfig.

This patch enables all the "new" Kconfig options so that current
defconfig's will continue to compile the expected drivers.  In
addition, by enabling all the new Kconfig options does not add
any un-expected options.

CC: Stephen Rothwll <sfc@canb.auug.org.au>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/3com/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_3COM
 	bool "3Com devices"
+	default y
 	depends on ISA || EISA || MCA || PCI || PCMCIA
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/8390/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_8390
 	bool "National Semi-conductor 8390 devices"
+	default y
 	depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \
 		   ISA || MCA || EISA || MAC || M32R || MACH_TX49XX || \
 		   MCA_LEGACY || H8300 || ARM || MIPS || ZORRO || PCMCIA || \

drivers/net/ethernet/adaptec/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_ADAPTEC
 	bool "Adaptec devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/alteon/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_ALTEON
 	bool "Alteon devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/amd/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_AMD
 	bool "AMD devices"
+	default y
 	depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
 		   SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
 		   (ARM && ARCH_EBSA110) || ISA || EISA || MCA || PCMCIA

drivers/net/ethernet/apple/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_APPLE
 	bool "Apple devices"
+	default y
 	depends on (PPC_PMAC && PPC32) || MAC || ISA || EISA || MACH_IXDP2351 \
 		   || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
 	---help---

drivers/net/ethernet/atheros/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_ATHEROS
 	bool "Atheros devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/broadcom/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_BROADCOM
 	bool "Broadcom devices"
+	default y
 	depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
 		   SIBYTE_SB1xxx_SOC
 	---help---

drivers/net/ethernet/brocade/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_BROCADE
 	bool "Brocade devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/chelsio/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_CHELSIO
 	bool "Chelsio devices"
+	default y
 	depends on PCI || INET
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/cirrus/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_CIRRUS
 	bool "Cirrus devices"
+	default y
 	depends on ARM && ARCH_EP93XX
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/cisco/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_CISCO
 	bool "Cisco devices"
+	default y
 	depends on PCI && INET
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/dec/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_DEC
 	bool "Digital Equipment devices"
+	default y
 	depends on PCI || EISA || CARDBUS
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/dlink/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_DLINK
 	bool "D-Link devices"
+	default y
 	depends on PCI || PARPORT
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/emulex/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_EMULEX
 	bool "Emulex devices"
+	default y
 	depends on PCI && INET
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/faraday/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_FARADAY
 	bool "Faraday devices"
+	default y
 	depends on ARM
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/freescale/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_FREESCALE
 	bool "Freescale devices"
+	default y
 	depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
 		   M523x || M527x || M5272 || M528x || M520x || M532x || \
 		   IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC || \

drivers/net/ethernet/fujitsu/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_FUJITSU
 	bool "Fujitsu devices"
+	default y
 	depends on ISA || PCMCIA || ((ISA || MCA_LEGACY) && EXPERIMENTAL)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/hp/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_HP
 	bool "HP devices"
+	default y
 	depends on ISA || EISA || PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/i825xx/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_I825XX
 	bool "Intel (82586/82593/82596) devices"
+	default y
 	depends on NET_VENDOR_INTEL && (ISA || ISA_DMA_API || ARM || \
 		   ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \
 		   GSC || BVME6000 || MVME16x || EXPERIMENTAL)

drivers/net/ethernet/ibm/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_IBM
 	bool "IBM devices"
+	default y
 	depends on MCA || PPC_PSERIES || PPC_PSERIES || PPC_DCR || \
 		   (IBMEBUS && INET && SPARSEMEM)
 	---help---

drivers/net/ethernet/intel/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_INTEL
 	bool "Intel devices"
+	default y
 	depends on PCI || PCI_MSI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/marvell/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_MARVELL
 	bool "Marvell devices"
+	default y
 	depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/mellanox/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_MELLANOX
 	bool "Mellanox devices"
+	default y
 	depends on PCI && INET
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/micrel/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_MICREL
 	bool "Micrel devices"
+	default y
 	depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM || \
 		   (ARM && ARCH_KS8695)
 	---help---

drivers/net/ethernet/microchip/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_MICROCHIP
 	bool "Microchip devices"
+	default y
 	depends on SPI && EXPERIMENTAL
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/myricom/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_MYRI
 	bool "Myricom devices"
+	default y
 	depends on PCI && INET
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say

drivers/net/ethernet/natsemi/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_NATSEMI
 	bool "National Semi-conductor devices"
+	default y
 	depends on MCA || MAC || MACH_JAZZ || PCI || XTENSA_PLATFORM_XT2000
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/neterion/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_EXAR
 	bool "Exar devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say

drivers/net/ethernet/nuvoton/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_NUVOTON
 	bool "Nuvoton devices"
+	default y
 	depends on ARM && ARCH_W90X900
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/nvidia/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_NVIDIA
 	bool "NVIDIA devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/oki-semi/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_OKI
 	bool "OKI Semiconductor devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/pasemi/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_PASEMI
 	bool "PA Semi devices"
+	default y
 	depends on PPC_PASEMI && PCI && INET
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/qlogic/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_QLOGIC
 	bool "QLogic devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/racal/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_RACAL
 	bool "Racal-Interlan (Micom) NI devices"
+	default y
 	depends on ISA
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, such

drivers/net/ethernet/rdc/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_RDC
 	bool "RDC devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/realtek/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_REALTEK
 	bool "Realtek devices"
+	default y
 	depends on PCI || (PARPORT && X86)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/seeq/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_SEEQ
 	bool "SEEQ devices"
+	default y
 	depends on (ARM && ARCH_ACORN) || SGI_HAS_SEEQ || EXPERIMENTAL
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/sgi/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_SGI
 	bool "SGI devices"
+	default y
 	depends on (PCI && SGI_IP27) || SGI_IP32
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/sis/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_SIS
 	bool "Silicon Integrated Systems (SiS) devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/smsc/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_SMSC
 	bool "SMC (SMSC)/Western Digital devices"
+	default y
 	depends on ARM || ISA || MAC || ARM || MIPS || M32R || SUPERH || \
 		BLACKFIN || MN10300 || COLDFIRE || PCI || PCMCIA
 	---help---

drivers/net/ethernet/stmicro/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_STMICRO
 	bool "STMicroelectronics devices"
+	default y
 	depends on HAS_IOMEM
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/sun/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_SUN
 	bool "Sun devices"
+	default y
 	depends on SUN3 || SBUS || PCI || SUN_LDOMS
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say

drivers/net/ethernet/tehuti/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_TEHUTI
 	bool "Tehuti devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/ti/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_TI
 	bool "Texas Instruments (TI) devices"
+	default y
 	depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3))
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/toshiba/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_TOSHIBA
 	bool "Toshiba devices"
+	default y
 	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) || PPC_PS3
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/tundra/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_TUNDRA
 	bool "Tundra devices"
+	default y
 	depends on TSI108_BRIDGE
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/via/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_VIA
 	bool "VIA devices"
+	default y
 	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/xilinx/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_XILINX
 	bool "Xilinx devices"
+	default y
 	depends on PPC || PPC32 || MICROBLAZE
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/xircom/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_XIRCOM
 	bool "Xircom devices"
+	default y
 	depends on PCMCIA
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/xscale/Kconfig

@@ -4,6 +4,7 @@
 
 config NET_VENDOR_XSCALE
 	bool "Intel XScale IXP devices"
+	default y
 	depends on NET_VENDOR_INTEL && ((ARM && ARCH_IXP4XX && \
 		   IXP4XX_NPE && IXP4XX_QMGR) || ARCH_ENP2611)
 	---help---