Merge branch 'for-next' of...

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel

CREDITS

@@ -3738,7 +3738,7 @@ S: 93149 Nittenau
 S: Germany
 
 N: Gertjan van Wingerde
-E: gwingerde@home.nl
+E: gwingerde@gmail.com
 D: Ralink rt2x00 WLAN driver
 D: Minix V2 file-system
 D: Misc fixes

Documentation/filesystems/ext2.txt

@@ -373,10 +373,11 @@ Filesystem Resizing	http://ext2resize.sourceforge.net/
 Compression (*)		http://e2compr.sourceforge.net/
 
 Implementations for:
-Windows 95/98/NT/2000	http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm
-Windows 95 (*)		http://www.yipton.demon.co.uk/content.html#FSDEXT2
+Windows 95/98/NT/2000	http://www.chrysocome.net/explore2fs
+Windows 95 (*)		http://www.yipton.net/content.html#FSDEXT2
 DOS client (*)		ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
-OS/2			http://perso.wanadoo.fr/matthieu.willm/ext2-os2/
-RISC OS client		ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/
+OS/2 (+)		ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
+RISC OS client		http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/
 
 (*) no longer actively developed/supported (as of Apr 2001)
+(+) no longer actively developed/supported (as of Mar 2009)

Documentation/filesystems/ext3.txt

@@ -198,5 +198,5 @@ kernel source:	<file:fs/ext3/>
 programs: 	http://e2fsprogs.sourceforge.net/
 		http://ext2resize.sourceforge.net
 
-useful links:	http://www-106.ibm.com/developerworks/linux/library/l-fs7/
-		http://www-106.ibm.com/developerworks/linux/library/l-fs8/
+useful links:	http://www.ibm.com/developerworks/library/l-fs7.html
+		http://www.ibm.com/developerworks/library/l-fs8.html

Documentation/filesystems/proc.txt

@@ -1478,6 +1478,13 @@ of problems on the network like duplicate address or bad checksums. Normally,
 this should be enabled, but if the problem persists the messages can be
 disabled.
 
+netdev_budget
+-------------
+
+Maximum number of packets taken from all interfaces in one polling cycle (NAPI
+poll). In one polling cycle interfaces which are registered to polling are
+probed in a round-robin manner. The limit of packets in one such probe can be
+set per-device via sysfs class/net/<device>/weight .
 
 netdev_max_backlog
 ------------------

Documentation/hwmon/lm90

@@ -42,6 +42,11 @@ Supported chips:
     Addresses scanned: I2C 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+  * Maxim MAX6648
+    Prefix: 'max6646'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
   * Maxim MAX6649
     Prefix: 'max6646'
     Addresses scanned: I2C 0x4c
@@ -74,6 +79,11 @@ Supported chips:
                            0x4c, 0x4d and 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+  * Maxim MAX6692
+    Prefix: 'max6646'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
 
 
 Author: Jean Delvare <khali@linux-fr.org>

Documentation/kernel-parameters.txt

@@ -830,6 +830,12 @@ and is between 256 and 4096 characters. It is defined in the file
 	hvc_iucv=	[S390] Number of z/VM IUCV hypervisor console (HVC)
 			       terminal devices. Valid values: 0..8
 
+	i2c_bus=	[HW] Override the default board specific I2C bus speed
+			     or register an additional I2C bus that is not
+			     registered from board initialization code.
+			     Format:
+			     <bus_id>,<clkrate>
+
 	i8042.debug	[HW] Toggle i8042 debug mode
 	i8042.direct	[HW] Put keyboard port into non-translated mode
 	i8042.dumbkbd	[HW] Pretend that controller can only read data from

Documentation/logo.txt

-This is the full-colour version of the currently unofficial Linux logo
-("currently unofficial" just means that there has been no paperwork and
-that I have not really announced it yet).  It was created by Larry Ewing,
-and is freely usable as long as you acknowledge Larry as the original
-artist. 
-
-Note that there are black-and-white versions of this available that
-scale down to smaller sizes and are better for letterheads or whatever
-you want to use it for: for the full range of logos take a look at
-Larry's web-page:
-
-	http://www.isc.tamu.edu/~lewing/linux/
+Tux is taking a three month sabbatical to work as a barber, so Tuz is
+standing in.  He's taken pains to ensure you'll hardly notice.
 
+Image by Andrew McGown and Josh Bush.  Image is licensed CC BY-SA.

MAINTAINERS

@@ -1469,8 +1469,6 @@ L:	linux-acpi@vger.kernel.org
 S:	Supported
 
 DOCUMENTATION (/Documentation directory)
-P:	Michael Kerrisk
-M:	mtk.manpages@gmail.com
 P:	Randy Dunlap
 M:	rdunlap@xenotime.net
 L:	linux-doc@vger.kernel.org
@@ -2879,7 +2877,7 @@ P:	Michael Kerrisk
 M:	mtk.manpages@gmail.com
 W:	http://www.kernel.org/doc/man-pages
 L:	linux-man@vger.kernel.org
-S:	Supported
+S:	Maintained
 
 MARVELL LIBERTAS WIRELESS DRIVER
 P:	Dan Williams
@@ -3352,10 +3350,8 @@ S:	Maintained
 PARISC ARCHITECTURE
 P:	Kyle McMartin
 M:	kyle@mcmartin.ca
-P:	Matthew Wilcox
-M:	matthew@wil.cx
-P:	Grant Grundler
-M:	grundler@parisc-linux.org
+P:	Helge Deller
+M:	deller@gmx.de
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
@@ -3896,6 +3892,15 @@ L:	linux-ide@vger.kernel.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
 S:	Supported
 
+SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
+P:	Sathya Perla
+M:	sathyap@serverengines.com
+P:      Subbu Seetharaman
+M:      subbus@serverengines.com
+L:      netdev@vger.kernel.org
+W:      http://www.serverengines.com
+S:      Supported
+
 SFC NETWORK DRIVER
 P:	Steve Hodgson
 P:	Ben Hutchings

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 29
-EXTRAVERSION = -rc7
-NAME = Erotic Pickled Herring
+EXTRAVERSION =
+NAME = Temporary Tasmanian Devil
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -566,6 +566,12 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 # disable pointer signed / unsigned warnings in gcc 4.0
 KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 
+# disable invalid "can't wrap" optimzations for signed / pointers
+KBUILD_CFLAGS	+= $(call cc-option,-fwrapv)
+
+# revert to pre-gcc-4.4 behaviour of .eh_frame
+KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
+
 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
 # But warn user when we do so
 warn-assign = \
@@ -904,12 +910,18 @@ localver = $(subst $(space),, $(string) \
 # and if the SCM is know a tag from the SCM is appended.
 # The appended tag is determined by the SCM used.
 #
-# Currently, only git is supported.
-# Other SCMs can edit scripts/setlocalversion and add the appropriate
-# checks as needed.
+# .scmversion is used when generating rpm packages so we do not loose
+# the version information from the SCM when we do the build of the kernel
+# from the copied source
 ifdef CONFIG_LOCALVERSION_AUTO
-	_localver-auto = $(shell $(CONFIG_SHELL) \
-	                  $(srctree)/scripts/setlocalversion $(srctree))
+
+ifeq ($(wildcard .scmversion),)
+        _localver-auto = $(shell $(CONFIG_SHELL) \
+                         $(srctree)/scripts/setlocalversion $(srctree))
+else
+        _localver-auto = $(shell cat .scmversion 2> /dev/null)
+endif
+
 	localver-auto  = $(LOCALVERSION)$(_localver-auto)
 endif
 
@@ -1537,7 +1549,7 @@ quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
       cmd_depmod = \
 	if [ -r System.map -a -x $(DEPMOD) ]; then                              \
 		$(DEPMOD) -ae -F System.map                                     \
-		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r)   \
+		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) )     \
 		$(KERNELRELEASE);                                               \
 	fi
 

arch/arm/mach-omap1/Kconfig

@@ -7,6 +7,11 @@ config ARCH_OMAP730
 	select CPU_ARM926T
 	select ARCH_OMAP_OTG
 
+config ARCH_OMAP850
+	depends on ARCH_OMAP1
+	bool "OMAP850 Based System"
+	select CPU_ARM926T
+
 config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
 	default y
@@ -46,6 +51,12 @@ config MACH_OMAP_H3
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
 
+config MACH_OMAP_HTCWIZARD
+	bool "HTC Wizard"
+	depends on ARCH_OMAP850
+	help
+	  HTC Wizard smartphone support (AKA QTEK 9100, ...)
+
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
@@ -163,7 +174,7 @@ config OMAP_ARM_216MHZ
 
 config OMAP_ARM_195MHZ
 	bool "OMAP ARM 195 MHz CPU"
-	depends on ARCH_OMAP1 && ARCH_OMAP730
+	depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 195MHz clock for OMAP CPU. If unsure, say N.
 
@@ -175,13 +186,13 @@ config OMAP_ARM_192MHZ
 
 config OMAP_ARM_182MHZ
 	bool "OMAP ARM 182 MHz CPU"
-	depends on ARCH_OMAP1 && ARCH_OMAP730
+	depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 182MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_168MHZ
 	bool "OMAP ARM 168 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 168MHz clock for OMAP CPU. If unsure, say N.
 
@@ -193,20 +204,20 @@ config OMAP_ARM_150MHZ
 
 config OMAP_ARM_120MHZ
 	bool "OMAP ARM 120 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 120MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_60MHZ
 	bool "OMAP ARM 60 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
         default y
 	help
           Enable 60MHz clock for OMAP CPU. If unsure, say Y.
 
 config OMAP_ARM_30MHZ
 	bool "OMAP ARM 30 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 30MHz clock for OMAP CPU. If unsure, say N.
 

arch/arm/mach-omap1/board-ams-delta.c

@@ -175,7 +175,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
 static struct omap_board_config_kernel ams_delta_config[] = {
 	{ OMAP_TAG_LCD,		&ams_delta_lcd_config },
 	{ OMAP_TAG_UART,	&ams_delta_uart_config },
-	{ OMAP_TAG_USB,		&ams_delta_usb_config },
 };
 
 static struct resource ams_delta_kp_resources[] = {
@@ -232,6 +231,7 @@ static void __init ams_delta_init(void)
 	/* Clear latch2 (NAND, LCD, modem enable) */
 	ams_delta_latch2_write(~0, 0);
 
+	omap_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 }
 

arch/arm/mach-omap1/board-fsample.c

@@ -34,7 +34,39 @@
 #include <mach/keypad.h>
 #include <mach/common.h>
 #include <mach/board.h>
-#include <mach/board-fsample.h>
+
+/* fsample is pretty close to p2-sample */
+
+#define fsample_cpld_read(reg) __raw_readb(reg)
+#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
+
+#define FSAMPLE_CPLD_BASE    0xE8100000
+#define FSAMPLE_CPLD_SIZE    SZ_4K
+#define FSAMPLE_CPLD_START   0x05080000
+
+#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
+#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
+#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
+#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
+
+#define FSAMPLE_CPLD_BIT_BT_RESET         0
+#define FSAMPLE_CPLD_BIT_LCD_RESET        1
+#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
+#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
+#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
+#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
+#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
+#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
+#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
+#define FSAMPLE_CPLD_BIT_OTG_RESET        9
+
+#define fsample_cpld_set(bit) \
+    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
+
+#define fsample_cpld_clear(bit) \
+    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
 
 static int fsample_keymap[] = {
 	KEY(0,0,KEY_UP),

arch/arm/mach-omap1/board-generic.c

@@ -62,7 +62,6 @@ static struct omap_uart_config generic_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel generic_config[] __initdata = {
-	{ OMAP_TAG_USB,		NULL },
 	{ OMAP_TAG_UART,	&generic_uart_config },
 };
 
@@ -70,12 +69,12 @@ static void __init omap_generic_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
-		generic_config[0].data = &generic1510_usb_config;
+		omap_usb_init(&generic1510_usb_config);
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (!cpu_is_omap1510()) {
-		generic_config[0].data = &generic1610_usb_config;
+		omap_usb_init(&generic1610_usb_config);
 	}
 #endif
 

arch/arm/mach-omap1/board-h2-mmc.c

@@ -19,6 +19,8 @@
 #include <mach/mmc.h>
 #include <mach/gpio.h>
 
+#include "board-h2.h"
+
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,

arch/arm/mach-omap1/board-h2.c

@@ -46,6 +46,11 @@
 #include <mach/keypad.h>
 #include <mach/common.h>
 
+#include "board-h2.h"
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define OMAP1610_ETHR_START		0x04000300
+
 static int h2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -364,7 +369,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel h2_config[] __initdata = {
-	{ OMAP_TAG_USB,		&h2_usb_config },
 	{ OMAP_TAG_UART,	&h2_uart_config },
 	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
@@ -413,6 +417,7 @@ static void __init h2_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
 			      ARRAY_SIZE(h2_i2c_board_info));
+	omap_usb_init(&h2_usb_config);
 	h2_mmc_init();
 }
 

arch/arm/plat-omap/include/mach/board-h2.h → arch/arm/mach-omap1/board-h2.h

 /*
- * arch/arm/plat-omap/include/mach/board-h2.h
+ * arch/arm/mach-omap1/board-h2.h
  *
  * Hardware definitions for TI OMAP1610 H2 board.
  *
@@ -29,9 +29,6 @@
 #ifndef __ASM_ARCH_OMAP_H2_H
 #define __ASM_ARCH_OMAP_H2_H
 
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define OMAP1610_ETHR_START		0x04000300
-
 #define H2_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
 #	define H2_TPS_GPIO_MMC_PWR_EN	(H2_TPS_GPIO_BASE + 3)
 

arch/arm/mach-omap1/board-h3-mmc.c

@@ -19,6 +19,8 @@
 #include <mach/mmc.h>
 #include <mach/gpio.h>
 
+#include "board-h3.h"
+
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,

arch/arm/mach-omap1/board-h3.c

@@ -50,6 +50,11 @@
 #include <mach/dma.h>
 #include <mach/common.h>
 
+#include "board-h3.h"
+
+/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
+#define OMAP1710_ETHR_START		0x04000300
+
 #define H3_TS_GPIO	48
 
 static int h3_keymap[] = {
@@ -418,7 +423,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel h3_config[] __initdata = {
-	{ OMAP_TAG_USB,		&h3_usb_config },
 	{ OMAP_TAG_UART,	&h3_uart_config },
 	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
@@ -472,6 +476,7 @@ static void __init h3_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
 			      ARRAY_SIZE(h3_i2c_board_info));
+	omap_usb_init(&h3_usb_config);
 	h3_mmc_init();
 }
 

arch/arm/plat-omap/include/mach/board-h3.h → arch/arm/mach-omap1/board-h3.h

 /*
- * arch/arm/plat-omap/include/mach/board-h3.h
+ * arch/arm/mach-omap1/board-h3.h
  *
  * Copyright (C) 2001 RidgeRun, Inc.
  * Copyright (C) 2004 Texas Instruments, Inc.
@@ -27,9 +27,6 @@
 #ifndef __ASM_ARCH_OMAP_H3_H
 #define __ASM_ARCH_OMAP_H3_H
 
-/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
-#define OMAP1710_ETHR_START		0x04000300
-
 #define H3_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
 #	define H3_TPS_GPIO_MMC_PWR_EN	(H3_TPS_GPIO_BASE + 4)
 

arch/arm/mach-omap1/board-innovator.c

@@ -39,6 +39,9 @@
 #include <mach/common.h>
 #include <mach/mmc.h>
 
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define INNOVATOR1610_ETHR_START	0x04000300
+
 static int innovator_keymap[] = {
 	KEY(0, 0, KEY_F1),
 	KEY(0, 3, KEY_DOWN),
@@ -370,7 +373,6 @@ static struct omap_uart_config innovator_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel innovator_config[] = {
-	{ OMAP_TAG_USB,         NULL },
 	{ OMAP_TAG_LCD,		NULL },
 	{ OMAP_TAG_UART,	&innovator_uart_config },
 };
@@ -392,13 +394,13 @@ static void __init innovator_init(void)
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
-		innovator_config[0].data = &innovator1510_usb_config;
+		omap_usb_init(&innovator1510_usb_config);
 		innovator_config[1].data = &innovator1510_lcd_config;
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
-		innovator_config[0].data = &h2_usb_config;
+		omap_usb_init(&h2_usb_config);
 		innovator_config[1].data = &innovator1610_lcd_config;
 	}
 #endif

arch/arm/mach-omap1/board-nokia770.c

@@ -233,10 +233,6 @@ static inline void nokia770_mmc_init(void)
 }
 #endif
 
-static struct omap_board_config_kernel nokia770_config[] __initdata = {
-	{ OMAP_TAG_USB,		NULL },
-};
-
 #if	defined(CONFIG_OMAP_DSP)
 /*
  * audio power control
@@ -371,19 +367,16 @@ static __init int omap_dsp_init(void)
 
 static void __init omap_nokia770_init(void)
 {
-	nokia770_config[0].data = &nokia770_usb_config;
-
 	platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
 	spi_register_board_info(nokia770_spi_board_info,
 				ARRAY_SIZE(nokia770_spi_board_info));
-	omap_board_config = nokia770_config;
-	omap_board_config_size = ARRAY_SIZE(nokia770_config);
 	omap_gpio_init();
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	omap_dsp_init();
 	ads7846_dev_init();
 	mipid_dev_init();
+	omap_usb_init(&nokia770_usb_config);
 	nokia770_mmc_init();
 }
 

arch/arm/mach-omap1/board-osk.c

@@ -52,6 +52,20 @@
 #include <mach/tc.h>
 #include <mach/common.h>
 
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
+#define OMAP_OSK_ETHR_START		0x04800300
+
+/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
+#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
+#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
+#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
+#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
+#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
+
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -290,7 +304,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
 #endif
 
 static struct omap_board_config_kernel osk_config[] __initdata = {
-	{ OMAP_TAG_USB,           &osk_usb_config },
 	{ OMAP_TAG_UART,		&osk_uart_config },
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 	{ OMAP_TAG_LCD,			&osk_lcd_config },
@@ -541,6 +554,8 @@ static void __init osk_init(void)
 	l |= (3 << 1);
 	omap_writel(l, USB_TRANSCEIVER_CTRL);
 
+	omap_usb_init(&osk_usb_config);
+
 	/* irq for tps65010 chip */
 	/* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */
 	if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)

arch/arm/mach-omap1/board-palmte.c

@@ -43,6 +43,21 @@
 #include <mach/keypad.h>
 #include <mach/common.h>
 
+#define PALMTE_USBDETECT_GPIO	0
+#define PALMTE_USB_OR_DC_GPIO	1
+#define PALMTE_TSC_GPIO		4
+#define PALMTE_PINTDAV_GPIO	6
+#define PALMTE_MMC_WP_GPIO	8
+#define PALMTE_MMC_POWER_GPIO	9
+#define PALMTE_HDQ_GPIO		11
+#define PALMTE_HEADPHONES_GPIO	14
+#define PALMTE_SPEAKER_GPIO	15
+#define PALMTE_DC_GPIO		OMAP_MPUIO(2)
+#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)
+#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)
+#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
+#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
+
 static void __init omap_palmte_init_irq(void)
 {
 	omap1_init_common_hw();
@@ -286,7 +301,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 #endif
 
 static struct omap_board_config_kernel palmte_config[] __initdata = {
-	{ OMAP_TAG_USB,		&palmte_usb_config },
 	{ OMAP_TAG_LCD,		&palmte_lcd_config },
 	{ OMAP_TAG_UART,	&palmte_uart_config },
 };
@@ -341,6 +355,7 @@ static void __init omap_palmte_init(void)
 	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
 	palmte_misc_gpio_setup();
 	omap_serial_init();
+	omap_usb_init(&palmte_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 

arch/arm/mach-omap1/board-palmtt.c

@@ -43,6 +43,13 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
+#define PALMTT_USBDETECT_GPIO	0
+#define PALMTT_CABLE_GPIO	1
+#define PALMTT_LED_GPIO		3
+#define PALMTT_PENIRQ_GPIO	6
+#define PALMTT_MMC_WP_GPIO	8
+#define PALMTT_HDQ_GPIO		11
+
 static int palmtt_keymap[] = {
 	KEY(0, 0, KEY_ESC),
 	KEY(0, 1, KEY_SPACE),
@@ -272,7 +279,6 @@ static struct omap_uart_config palmtt_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel palmtt_config[] __initdata = {
-	{ OMAP_TAG_USB,		&palmtt_usb_config	},
 	{ OMAP_TAG_LCD,		&palmtt_lcd_config	},
 	{ OMAP_TAG_UART,	&palmtt_uart_config	},
 };
@@ -297,6 +303,7 @@ static void __init omap_palmtt_init(void)
 
 	spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
 	omap_serial_init();
+	omap_usb_init(&palmtt_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 

arch/arm/mach-omap1/board-palmz71.c

@@ -46,6 +46,16 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
+#define PALMZ71_USBDETECT_GPIO	0
+#define PALMZ71_PENIRQ_GPIO	6
+#define PALMZ71_MMC_WP_GPIO	8
+#define PALMZ71_HDQ_GPIO 	11
+
+#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
+#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
+#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
+#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
+
 static void __init
 omap_palmz71_init_irq(void)
 {
@@ -239,7 +249,6 @@ static struct omap_uart_config palmz71_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel palmz71_config[] __initdata = {
-	{OMAP_TAG_USB,	&palmz71_usb_config},
 	{OMAP_TAG_LCD,	&palmz71_lcd_config},
 	{OMAP_TAG_UART,	&palmz71_uart_config},
 };
@@ -313,6 +322,7 @@ omap_palmz71_init(void)
 
 	spi_register_board_info(palmz71_boardinfo,
 				ARRAY_SIZE(palmz71_boardinfo));
+	omap_usb_init(&palmz71_usb_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	palmz71_gpio_setup(0);

arch/arm/mach-omap1/board-sx1-mmc.c

@@ -17,6 +17,7 @@
 #include <mach/hardware.h>
 #include <mach/mmc.h>
 #include <mach/gpio.h>
+#include <mach/board-sx1.h>
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 

arch/arm/mach-omap1/board-sx1.c

@@ -41,6 +41,7 @@
 #include <mach/board.h>
 #include <mach/common.h>
 #include <mach/keypad.h>
+#include <mach/board-sx1.h>
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
@@ -373,7 +374,6 @@ static struct omap_uart_config sx1_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel sx1_config[] __initdata = {
-	{ OMAP_TAG_USB,	&sx1_usb_config },
 	{ OMAP_TAG_LCD,	&sx1_lcd_config },
 	{ OMAP_TAG_UART,	&sx1_uart_config },
 };
@@ -388,6 +388,7 @@ static void __init omap_sx1_init(void)
 	omap_board_config_size = ARRAY_SIZE(sx1_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
+	omap_usb_init(&sx1_usb_config);
 	sx1_mmc_init();
 
 	/* turn on USB power */

arch/arm/mach-omap1/board-voiceblue.c

@@ -145,7 +145,6 @@ static struct omap_uart_config voiceblue_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel voiceblue_config[] = {
-	{ OMAP_TAG_USB,  &voiceblue_usb_config },
 	{ OMAP_TAG_UART, &voiceblue_uart_config },
 };
 
@@ -185,6 +184,7 @@ static void __init voiceblue_init(void)
 	omap_board_config = voiceblue_config;
 	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
 	omap_serial_init();
+	omap_usb_init(&voiceblue_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
 	/* There is a good chance board is going up, so enable power LED

arch/arm/mach-omap1/devices.c

@@ -86,7 +86,7 @@ static struct resource mbox_resources[] = {
 };
 
 static struct platform_device mbox_device = {
-	.name		= "mailbox",
+	.name		= "omap1-mailbox",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(mbox_resources),
 	.resource	= mbox_resources,

arch/arm/mach-omap1/id.c

@@ -38,6 +38,7 @@ static struct omap_id omap_ids[] __initdata = {
 	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
 	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
 	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
+	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320500, .type = 0x08500000},
 	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
@@ -77,7 +78,7 @@ static u16 __init omap_get_jtag_id(void)
 	prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
 	omap_id = omap_readl(OMAP32_ID_1);
 
-	/* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
+	/* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730/850 */
 	if (((prod_id >> 20) == 0) || (prod_id == omap_id))
 		prod_id = 0;
 	else
@@ -178,6 +179,7 @@ void __init omap_check_revision(void)
 
 	switch (cpu_type) {
 	case 0x07:
+	case 0x08:
 		omap_revision |= 0x07;
 		break;
 	case 0x03:

arch/arm/mach-omap1/io.c

@@ -52,6 +52,22 @@ static struct map_desc omap730_io_desc[] __initdata = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_OMAP850
+static struct map_desc omap850_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP850_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP850_DSP_START),
+		.length		= OMAP850_DSP_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= OMAP850_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP850_DSPREG_START),
+		.length		= OMAP850_DSPREG_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+#endif
+
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct map_desc omap1510_io_desc[] __initdata = {
 	{
@@ -109,6 +125,13 @@ void __init omap1_map_common_io(void)
 		iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
 	}
 #endif
+
+#ifdef CONFIG_ARCH_OMAP850
+	if (cpu_is_omap850()) {
+		iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc));
+	}
+#endif
+
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
 		iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));

arch/arm/mach-omap1/irq.c

@@ -145,6 +145,14 @@ static struct omap_irq_bank omap730_irq_banks[] = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_OMAP850
+static struct omap_irq_bank omap850_irq_banks[] = {
+	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
+	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
+	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
+};
+#endif
+
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_irq_bank omap1510_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3febfff },
@@ -184,6 +192,12 @@ void __init omap_init_irq(void)
 		irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	if (cpu_is_omap850()) {
+		irq_banks = omap850_irq_banks;
+		irq_bank_count = ARRAY_SIZE(omap850_irq_banks);
+	}
+#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		irq_banks = omap1510_irq_banks;
@@ -214,9 +228,8 @@ void __init omap_init_irq(void)
 	irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
 
 	/* Enable interrupts in global mask */
-	if (cpu_is_omap730()) {
+	if (cpu_is_omap7xx())
 		irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET);
-	}
 
 	/* Install the interrupt handlers for each bank */
 	for (i = 0; i < irq_bank_count; i++) {
@@ -236,6 +249,8 @@ void __init omap_init_irq(void)
 
 	if (cpu_is_omap730())
 		omap_unmask_irq(INT_730_IH2_IRQ);
+	else if (cpu_is_omap850())
+		omap_unmask_irq(INT_850_IH2_IRQ);
 	else if (cpu_is_omap15xx())
 		omap_unmask_irq(INT_1510_IH2_IRQ);
 	else if (cpu_is_omap16xx())

arch/arm/mach-omap1/mailbox.c

 /*
  * Mailbox reservation modules for DSP
  *
- * Copyright (C) 2006 Nokia Corporation
+ * Copyright (C) 2006-2009 Nokia Corporation
  * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -27,7 +27,7 @@
 #define MAILBOX_DSP2ARM1_Flag		0x1c
 #define MAILBOX_DSP2ARM2_Flag		0x20
 
-unsigned long mbox_base;
+static void __iomem *mbox_base;
 
 struct omap_mbox1_fifo {
 	unsigned long cmd;
@@ -40,14 +40,14 @@ struct omap_mbox1_priv {
 	struct omap_mbox1_fifo rx_fifo;
 };
 
-static inline int mbox_read_reg(unsigned int reg)
+static inline int mbox_read_reg(size_t ofs)
 {
-	return __raw_readw(mbox_base + reg);
+	return __raw_readw(mbox_base + ofs);
 }
 
-static inline void mbox_write_reg(unsigned int val, unsigned int reg)
+static inline void mbox_write_reg(u32 val, size_t ofs)
 {
-	__raw_writew(val, mbox_base + reg);
+	__raw_writew(val, mbox_base + ofs);
 }
 
 /* msg */
@@ -143,7 +143,7 @@ struct omap_mbox mbox_dsp_info = {
 };
 EXPORT_SYMBOL(mbox_dsp_info);
 
-static int __init omap1_mbox_probe(struct platform_device *pdev)
+static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	int ret = 0;
@@ -170,12 +170,10 @@ static int __init omap1_mbox_probe(struct platform_device *pdev)
 	}
 	mbox_dsp_info.irq = res->start;
 
-	ret = omap_mbox_register(&mbox_dsp_info);
-
-	return ret;
+	return omap_mbox_register(&pdev->dev, &mbox_dsp_info);
 }
 
-static int omap1_mbox_remove(struct platform_device *pdev)
+static int __devexit omap1_mbox_remove(struct platform_device *pdev)
 {
 	omap_mbox_unregister(&mbox_dsp_info);
 
@@ -184,9 +182,9 @@ static int omap1_mbox_remove(struct platform_device *pdev)
 
 static struct platform_driver omap1_mbox_driver = {
 	.probe	= omap1_mbox_probe,
-	.remove	= omap1_mbox_remove,
+	.remove	= __devexit_p(omap1_mbox_remove),
 	.driver	= {
-		.name	= "mailbox",
+		.name	= "omap1-mailbox",
 	},
 };
 
@@ -203,4 +201,7 @@ static void __exit omap1_mbox_exit(void)
 module_init(omap1_mbox_init);
 module_exit(omap1_mbox_exit);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
+MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_ALIAS("platform:omap1-mailbox");

arch/arm/mach-omap1/mux.c

@@ -58,6 +58,25 @@ MUX_CFG_730("W17_730_USB_VBUSI",   2,   29,    0,   28,   0, 0)
 #define OMAP730_PINS_SZ		0
 #endif	/* CONFIG_ARCH_OMAP730 */
 
+#ifdef CONFIG_ARCH_OMAP850
+struct pin_config __initdata_or_module omap850_pins[] = {
+MUX_CFG_850("E2_850_KBR0",        12,   21,    0,   20,   1, 0)
+MUX_CFG_850("J7_850_KBR1",        12,   25,    0,   24,   1, 0)
+MUX_CFG_850("E1_850_KBR2",        12,   29,    0,   28,   1, 0)
+MUX_CFG_850("F3_850_KBR3",        13,    1,    0,    0,   1, 0)
+MUX_CFG_850("D2_850_KBR4",        13,    5,    0,    4,   1, 0)
+MUX_CFG_850("C2_850_KBC0",        13,    9,    0,    8,   1, 0)
+MUX_CFG_850("D3_850_KBC1",        13,   13,    0,   12,   1, 0)
+MUX_CFG_850("E4_850_KBC2",        13,   17,    0,   16,   1, 0)
+MUX_CFG_850("F4_850_KBC3",        13,   21,    0,   20,   1, 0)
+MUX_CFG_850("E3_850_KBC4",        13,   25,    0,   24,   1, 0)
+
+MUX_CFG_850("AA17_850_USB_DM",     2,   21,    0,   20,   0, 0)
+MUX_CFG_850("W16_850_USB_PU_EN",   2,   25,    0,   24,   0, 0)
+MUX_CFG_850("W17_850_USB_VBUSI",   2,   29,    0,   28,   0, 0)
+};
+#endif
+
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
 static struct pin_config __initdata_or_module omap1xxx_pins[] = {
 /*
@@ -419,6 +438,11 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
 			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
 	}
+
+#ifdef CONFIG_ARCH_OMAP850
+	omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins));
+#endif
+
 #endif
 
 #ifdef CONFIG_OMAP_MUX_ERRORS

arch/arm/mach-omap1/serial.c

@@ -121,6 +121,13 @@ void __init omap_serial_init(void)
 		serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
 	}
 
+	if (cpu_is_omap850()) {
+		serial_platform_data[0].regshift = 0;
+		serial_platform_data[1].regshift = 0;
+		serial_platform_data[0].irq = INT_850_UART_MODEM_1;
+		serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2;
+	}
+
 	if (cpu_is_omap15xx()) {
 		serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
 		serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;

arch/arm/mach-omap2/Kconfig

@@ -58,4 +58,12 @@ config MACH_OVERO
 
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
\ No newline at end of file
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_3430SDP
+	bool "OMAP 3430 SDP board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_NOKIA_RX51
+	bool "Nokia RX-51 board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX

arch/arm/mach-omap2/Makefile

@@ -42,4 +42,12 @@ obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
+					   mmc-twl4030.o
 
+obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
+					   board-rx51-peripherals.o \
+# Platform specific device init code
+ifeq ($(CONFIG_USB_MUSB_SOC),y)
+obj-y					+= usb-musb.o
+endif

arch/arm/mach-omap2/board-2430sdp.c

@@ -35,12 +35,16 @@
 #include <mach/board.h>
 #include <mach/common.h>
 #include <mach/gpmc.h>
+#include <mach/usb.h>
 
 #include "mmc-twl4030.h"
 
+#define SDP2430_CS0_BASE	0x04000000
 #define	SDP2430_FLASH_CS	0
 #define	SDP2430_SMC91X_CS	5
 
+#define SDP2430_ETHR_GPIO_IRQ		149
+
 static struct mtd_partition sdp2430_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -102,8 +106,8 @@ static struct resource sdp2430_smc91x_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
-		.end	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+		.start	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
+		.end	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
@@ -170,13 +174,13 @@ static inline void __init sdp2430_init_smc91x(void)
 	sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
 	udelay(100);
 
-	if (gpio_request(OMAP24XX_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
+	if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			OMAP24XX_ETHR_GPIO_IRQ);
+			SDP2430_ETHR_GPIO_IRQ);
 		gpmc_cs_free(eth_cs);
 		goto out;
 	}
-	gpio_direction_input(OMAP24XX_ETHR_GPIO_IRQ);
+	gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
 
 out:
 	clk_disable(gpmc_fck);
@@ -251,6 +255,7 @@ static void __init omap_2430sdp_init(void)
 	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
+	usb_musb_init();
 }
 
 static void __init omap_2430sdp_map_io(void)

arch/arm/mach-omap2/board-apollon.c

@@ -51,6 +51,7 @@
 
 #define APOLLON_FLASH_CS	0
 #define APOLLON_ETH_CS		1
+#define APOLLON_ETHR_GPIO_IRQ	74
 
 static struct mtd_partition apollon_partitions[] = {
 	{
@@ -272,7 +273,6 @@ static struct omap_lcd_config apollon_lcd_config __initdata = {
 
 static struct omap_board_config_kernel apollon_config[] = {
 	{ OMAP_TAG_UART,	&apollon_uart_config },
-	{ OMAP_TAG_USB,		&apollon_usb_config },
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
@@ -299,6 +299,7 @@ static void __init apollon_usb_init(void)
 	omap_cfg_reg(P21_242X_GPIO12);
 	gpio_request(12, "USB suspend");
 	gpio_direction_output(12, 0);
+	omap_usb_init(&apollon_usb_config);
 }
 
 static void __init omap_apollon_init(void)

arch/arm/mach-omap2/board-h4.c

@@ -47,6 +47,8 @@
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1
 
+#define H4_ETHR_GPIO_IRQ		92
+
 static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
 static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
 
@@ -341,7 +343,7 @@ static inline void __init h4_init_debug(void)
 	udelay(100);
 
 	omap_cfg_reg(M15_24XX_GPIO92);
-	if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0)
+	if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
 		gpmc_cs_free(eth_cs);
 
 out:
@@ -377,6 +379,39 @@ static struct omap_lcd_config h4_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
+static struct omap_usb_config h4_usb_config __initdata = {
+#ifdef	CONFIG_MACH_OMAP2_H4_USB1
+	/* NOTE:  usb1 could also be used with 3 wire signaling */
+	.pins[1]	= 4,
+#endif
+
+#ifdef	CONFIG_MACH_OMAP_H4_OTG
+	/* S1.10 ON -- USB OTG port
+	 * usb0 switched to Mini-AB port and isp1301 transceiver;
+	 * S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging
+	 */
+	.otg		= 1,
+	.pins[0]	= 4,
+#ifdef	CONFIG_USB_GADGET_OMAP
+	/* use OTG cable, or standard A-to-MiniB */
+	.hmc_mode	= 0x14,	/* 0:dev/otg 1:host 2:disable */
+#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	/* use OTG cable, or NONSTANDARD (B-to-MiniB) */
+	.hmc_mode	= 0x11,	/* 0:host 1:host 2:disable */
+#endif	/* XX */
+
+#else
+	/* S1.10 OFF -- usb "download port"
+	 * usb0 switched to Mini-B port and isp1105 transceiver;
+	 * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging
+	 */
+	.register_dev	= 1,
+	.pins[0]	= 3,
+/*	.hmc_mode	= 0x14,*/	/* 0:dev 1:host 2:disable */
+	.hmc_mode	= 0x00,		/* 0:dev|otg 1:disable 2:disable */
+#endif
+};
+
 static struct omap_board_config_kernel h4_config[] = {
 	{ OMAP_TAG_UART,	&h4_uart_config },
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
@@ -428,6 +463,7 @@ static void __init omap_h4_init(void)
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
 	omap_board_config = h4_config;
 	omap_board_config_size = ARRAY_SIZE(h4_config);
+	omap_usb_init(&h4_usb_config);
 	omap_serial_init();
 }
 

arch/arm/mach-omap2/board-ldp.c

@@ -29,7 +29,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-ldp.h>
 #include <mach/mcspi.h>
 #include <mach/gpio.h>
 #include <mach/board.h>
@@ -38,15 +37,19 @@
 
 #include <asm/delay.h>
 #include <mach/control.h>
+#include <mach/usb.h>
 
 #include "mmc-twl4030.h"
 
-#define SDP3430_SMC91X_CS	3
+#define LDP_SMC911X_CS		1
+#define LDP_SMC911X_GPIO	152
+#define DEBUG_BASE		0x08000000
+#define LDP_ETHR_START		DEBUG_BASE
 
 static struct resource ldp_smc911x_resources[] = {
 	[0] = {
-		.start	= OMAP34XX_ETHR_START,
-		.end	= OMAP34XX_ETHR_START + SZ_4K,
+		.start	= LDP_ETHR_START,
+		.end	= LDP_ETHR_START + SZ_4K,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -162,6 +165,7 @@ static void __init omap_ldp_init(void)
 	omap_board_config_size = ARRAY_SIZE(ldp_config);
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
+	usb_musb_init();
 }
 
 static void __init omap_ldp_map_io(void)

arch/arm/mach-omap2/board-omap3beagle.c

@@ -41,6 +41,7 @@
 #include <mach/gpmc.h>
 #include <mach/nand.h>
 #include <mach/mux.h>
+#include <mach/usb.h>
 
 #include "mmc-twl4030.h"
 
@@ -175,9 +176,6 @@ static int __init omap3_beagle_i2c_init(void)
 {
 	omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
 			ARRAY_SIZE(beagle_i2c_boardinfo));
-#ifdef CONFIG_I2C2_OMAP_BEAGLE
-	omap_register_i2c_bus(2, 400, NULL, 0);
-#endif
 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
 	 * projector don't work reliably with 400kHz */
 	omap_register_i2c_bus(3, 100, NULL, 0);
@@ -316,6 +314,7 @@ static void __init omap3_beagle_init(void)
 	/* REVISIT leave DVI powered down until it's needed ... */
 	gpio_direction_output(170, true);
 
+	usb_musb_init();
 	omap3beagle_flash_init();
 }
 

arch/arm/plat-omap/include/mach/board-voiceblue.h

@@ -14,7 +14,6 @@
 extern void voiceblue_wdt_enable(void);
 extern void voiceblue_wdt_disable(void);
 extern void voiceblue_wdt_ping(void);
-extern void voiceblue_reset(void);
 
 #endif /*  __ASM_ARCH_VOICEBLUE_H */