Commit 89385035 authored by Matthew Ranostay's avatar Matthew Ranostay Committed by Jaroslav Kysela

ALSA: hda: Input port AMP controls

Added support for controlling hardware gain amps on input ports
using a volume control mixer with a mux selecting the port being controlled.
Signed-off-by: default avatarMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarJaroslav Kysela <perex@perex.cz>
parent 6a14f585
......@@ -961,15 +961,6 @@ void snd_hda_codec_resume_amp(struct hda_codec *codec)
}
#endif /* SND_HDA_NEEDS_RESUME */
/*
* AMP control callbacks
*/
/* retrieve parameters from private_value */
#define get_amp_nid(kc) ((kc)->private_value & 0xffff)
#define get_amp_channels(kc) (((kc)->private_value >> 16) & 0x3)
#define get_amp_direction(kc) (((kc)->private_value >> 18) & 0x1)
#define get_amp_index(kc) (((kc)->private_value >> 19) & 0xf)
/* volume */
int snd_hda_mixer_amp_volume_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
......
......@@ -418,4 +418,13 @@ int snd_hda_check_amp_list_power(struct hda_codec *codec,
hda_nid_t nid);
#endif /* CONFIG_SND_HDA_POWER_SAVE */
/*
* AMP control callbacks
*/
/* retrieve parameters from private_value */
#define get_amp_nid(kc) ((kc)->private_value & 0xffff)
#define get_amp_channels(kc) (((kc)->private_value >> 16) & 0x3)
#define get_amp_direction(kc) (((kc)->private_value >> 18) & 0x1)
#define get_amp_index(kc) (((kc)->private_value >> 19) & 0xf)
#endif /* __SOUND_HDA_LOCAL_H */
......@@ -157,10 +157,13 @@ struct sigmatel_spec {
unsigned int num_pwrs;
unsigned int *pwr_mapping;
hda_nid_t *pwr_nids;
hda_nid_t *amp_nids;
hda_nid_t *dac_list;
/* playback */
struct hda_input_mux *mono_mux;
struct hda_input_mux *amp_mux;
unsigned int cur_amux;
unsigned int cur_mmux;
struct hda_multi_out multiout;
hda_nid_t dac_nids[5];
......@@ -216,6 +219,7 @@ struct sigmatel_spec {
struct hda_input_mux private_dimux;
struct hda_input_mux private_imux;
struct hda_input_mux private_smux;
struct hda_input_mux private_amp_mux;
struct hda_input_mux private_mono_mux;
};
......@@ -244,6 +248,10 @@ static hda_nid_t stac92hd73xx_adc_nids[2] = {
0x1a, 0x1b
};
static hda_nid_t stac92hd73xx_amp_nids[4] = {
0x0b, 0x0c, 0x0e, 0
};
#define STAC92HD73XX_NUM_DMICS 2
static hda_nid_t stac92hd73xx_dmic_nids[STAC92HD73XX_NUM_DMICS + 1] = {
0x13, 0x14, 0
......@@ -449,6 +457,34 @@ static hda_nid_t stac9205_pin_nids[12] = {
0x21, 0x22,
};
#define stac92xx_amp_volume_info snd_hda_mixer_amp_volume_info
static int stac92xx_amp_volume_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct sigmatel_spec *spec = codec->spec;
hda_nid_t nid = spec->amp_nids[spec->cur_amux];
kcontrol->private_value ^= get_amp_nid(kcontrol);
kcontrol->private_value |= nid;
return snd_hda_mixer_amp_volume_get(kcontrol, ucontrol);
}
static int stac92xx_amp_volume_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct sigmatel_spec *spec = codec->spec;
hda_nid_t nid = spec->amp_nids[spec->cur_amux];
kcontrol->private_value ^= get_amp_nid(kcontrol);
kcontrol->private_value |= nid;
return snd_hda_mixer_amp_volume_put(kcontrol, ucontrol);
}
static int stac92xx_dmux_enum_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
......@@ -564,6 +600,41 @@ static int stac92xx_mono_mux_enum_put(struct snd_kcontrol *kcontrol,
spec->mono_nid, &spec->cur_mmux);
}
static int stac92xx_amp_mux_enum_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct sigmatel_spec *spec = codec->spec;
return snd_hda_input_mux_info(spec->amp_mux, uinfo);
}
static int stac92xx_amp_mux_enum_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct sigmatel_spec *spec = codec->spec;
ucontrol->value.enumerated.item[0] = spec->cur_amux;
return 0;
}
static int stac92xx_amp_mux_enum_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct sigmatel_spec *spec = codec->spec;
struct snd_kcontrol *ctl =
snd_hda_find_mixer_ctl(codec, "Amp Capture Volume");
if (!ctl)
return -EINVAL;
snd_ctl_notify(codec->bus->card, SNDRV_CTL_EVENT_MASK_VALUE |
SNDRV_CTL_EVENT_MASK_INFO, &ctl->id);
return snd_hda_input_mux_put(codec, spec->amp_mux, ucontrol,
0, &spec->cur_amux);
}
#define stac92xx_aloopback_info snd_ctl_boolean_mono_info
static int stac92xx_aloopback_get(struct snd_kcontrol *kcontrol,
......@@ -838,6 +909,31 @@ static struct hda_verb stac9205_core_init[] = {
.put = stac92xx_mono_mux_enum_put, \
}
#define STAC_AMP_MUX \
{ \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.name = "Amp Selector Capture Switch", \
.count = 1, \
.info = stac92xx_amp_mux_enum_info, \
.get = stac92xx_amp_mux_enum_get, \
.put = stac92xx_amp_mux_enum_put, \
}
#define STAC_AMP_VOL(xname, nid, chs, idx, dir) \
{ \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.name = xname, \
.index = 0, \
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK, \
.info = stac92xx_amp_volume_info, \
.get = stac92xx_amp_volume_get, \
.put = stac92xx_amp_volume_put, \
.tlv = { .c = snd_hda_mixer_amp_tlv }, \
.private_value = HDA_COMPOSE_AMP_VAL(nid, chs, idx, dir) \
}
#define STAC_INPUT_SOURCE(cnt) \
{ \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
......@@ -2421,6 +2517,8 @@ enum {
STAC_CTL_WIDGET_VOL,
STAC_CTL_WIDGET_MUTE,
STAC_CTL_WIDGET_MONO_MUX,
STAC_CTL_WIDGET_AMP_MUX,
STAC_CTL_WIDGET_AMP_VOL,
STAC_CTL_WIDGET_HP_SWITCH,
STAC_CTL_WIDGET_IO_SWITCH,
STAC_CTL_WIDGET_CLFE_SWITCH
......@@ -2430,6 +2528,8 @@ static struct snd_kcontrol_new stac92xx_control_templates[] = {
HDA_CODEC_VOLUME(NULL, 0, 0, 0),
HDA_CODEC_MUTE(NULL, 0, 0, 0),
STAC_MONO_MUX,
STAC_AMP_MUX,
STAC_AMP_VOL(NULL, 0, 0, 0, 0),
STAC_CODEC_HP_SWITCH(NULL),
STAC_CODEC_IO_SWITCH(NULL, 0),
STAC_CODEC_CLFE_SWITCH(NULL, 0),
......@@ -2847,6 +2947,35 @@ static int stac92xx_auto_create_mono_output_ctls(struct hda_codec *codec)
"Mono Mux", spec->mono_nid);
}
/* labels for amp mux outputs */
static const char *stac92xx_amp_labels[3] = {
"Front Microphone", "Microphone", "Line In"
};
/* create amp out controls mux on capable codecs */
static int stac92xx_auto_create_amp_output_ctls(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
struct hda_input_mux *amp_mux = &spec->private_amp_mux;
int i, err;
for (i = 0; i < ARRAY_SIZE(stac92xx_amp_labels); i++) {
amp_mux->items[amp_mux->num_items].label =
stac92xx_amp_labels[i];
amp_mux->items[amp_mux->num_items].index = i;
amp_mux->num_items++;
}
err = stac92xx_add_control(spec, STAC_CTL_WIDGET_AMP_MUX,
"Amp Selector Capture Switch", 0);
if (err < 0)
return err;
return stac92xx_add_control(spec, STAC_CTL_WIDGET_AMP_VOL,
"Amp Capture Volume",
HDA_COMPOSE_AMP_VAL(spec->amp_nids[0], 3, 0, HDA_INPUT));
}
/* create PC beep volume controls */
static int stac92xx_auto_create_beep_ctls(struct hda_codec *codec,
hda_nid_t nid)
......@@ -3216,7 +3345,11 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
if (err < 0)
return err;
}
if (spec->amp_nids) {
err = stac92xx_auto_create_amp_output_ctls(codec);
if (err < 0)
return err;
}
if (spec->num_dmics > 0)
if ((err = stac92xx_auto_create_dmic_input_ctls(codec,
&spec->autocfg)) < 0)
......@@ -3249,7 +3382,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
spec->dinput_mux = &spec->private_dimux;
spec->sinput_mux = &spec->private_smux;
spec->mono_mux = &spec->private_mono_mux;
spec->amp_mux = &spec->private_amp_mux;
return 1;
}
......@@ -3917,6 +4050,7 @@ static int patch_stac92hd73xx(struct hda_codec *codec)
spec->dmic_nids = stac92hd73xx_dmic_nids;
spec->dmux_nids = stac92hd73xx_dmux_nids;
spec->smux_nids = stac92hd73xx_smux_nids;
spec->amp_nids = stac92hd73xx_amp_nids;
spec->num_muxes = ARRAY_SIZE(stac92hd73xx_mux_nids);
spec->num_adcs = ARRAY_SIZE(stac92hd73xx_adc_nids);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment