Skip to content

L
linux
Commit 8d3b2f03 authored by Vladimir Kondratiev's avatar Vladimir Kondratiev Committed by Kalle Valo
Browse files
Options

wil6210: Tx/Rx descriptors documentation 

Sync documentation for the Tx/Rx descriptors with the
firmware/hardware documentation.
Signed-off-by: default avatarVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent e4373d8e
Hide whitespace changes
Inline Side-by-side
Showing with 98 additions and 53 deletions
drivers/net/wireless/ath/wil6210/txrx.c
View file @ 8d3b2f03
......@@ -463,7 +463,7 @@ static struct sk_buff *wil_vring_reap_rx(struct wil6210_priv *wil,
* and in case of error drop the packet
* higher stack layers will handle retransmission (if required)
*/
if (d->dma.status & RX_DMA_STATUS_L4_IDENT) {
if (d->dma.status & RX_DMA_STATUS_L4I) {
/* L4 protocol identified, csum calculated */
if ((d->dma.error & RX_DMA_ERROR_L4_ERR) == 0)
skb->ip_summed = CHECKSUM_UNNECESSARY;
......
drivers/net/wireless/ath/wil6210/txrx.h
View file @ 8d3b2f03
......@@ -28,9 +28,7 @@
/* Tx/Rx path */
/*
* Common representation of physical address in Vring
*/
/* Common representation of physical address in Vring */
struct vring_dma_addr {
__le32 addr_low;
__le16 addr_high;
......@@ -49,11 +47,10 @@ static inline void wil_desc_addr_set(struct vring_dma_addr *addr,
addr->addr_high = cpu_to_le16((u16)upper_32_bits(pa));
}
/*
* Tx descriptor - MAC part
/* Tx descriptor - MAC part
* [dword 0]
* bit 0.. 9 : lifetime_expiry_value:10
* bit 10 : interrup_en:1
* bit 10 : interrupt_en:1
* bit 11 : status_en:1
* bit 12..13 : txss_override:2
* bit 14 : timestamp_insertion:1
......@@ -61,15 +58,12 @@ static inline void wil_desc_addr_set(struct vring_dma_addr *addr,
* bit 16..21 : reserved0:6
* bit 22..26 : mcs_index:5
* bit 27 : mcs_en:1
* bit 28..29 : reserved1:2
* bit 30 : reserved2:1
* bit 28..30 : reserved1:3
* bit 31 : sn_preserved:1
* [dword 1]
* bit 0.. 3 : pkt_mode:4
* bit 4 : pkt_mode_en:1
* bit 5.. 7 : reserved0:3
* bit 8..13 : reserved1:6
* bit 14 : reserved2:1
* bit 5..14 : reserved0:10
* bit 15 : ack_policy_en:1
* bit 16..19 : dst_index:4
* bit 20 : dst_index_en:1
......@@ -80,7 +74,7 @@ static inline void wil_desc_addr_set(struct vring_dma_addr *addr,
* [dword 2]
* bit 0.. 7 : num_of_descriptors:8
* bit 8..17 : reserved:10
* bit 18..19 : l2_translation_type:2
* bit 18..19 : l2_translation_type:2 00 - bypass, 01 - 802.3, 10 - 802.11
* bit 20 : snap_hdr_insertion_en:1
* bit 21 : vlan_removal_en:1
* bit 22..31 : reserved0:10
......@@ -247,6 +241,46 @@ struct vring_tx_mac {
#define TX_DMA_STATUS_DU BIT(0)
/* Tx descriptor - DMA part
* [dword 0]
* bit 0.. 7 : l4_length:8 layer 4 length
* bit 8 : cmd_eop:1 This descriptor is the last one in the packet
* bit 9 : reserved
* bit 10 : cmd_dma_it:1 immediate interrupt
* bit 11..12 : SBD - Segment Buffer Details
* 00 - Header Segment
* 01 - First Data Segment
* 10 - Medium Data Segment
* 11 - Last Data Segment
* bit 13 : TSE - TCP Segmentation Enable
* bit 14 : IIC - Directs the HW to Insert IPv4 Checksum
* bit 15 : ITC - Directs the HW to Insert TCP/UDP Checksum
* bit 16..20 : QID - The target QID that the packet should be stored
* in the MAC.
* bit 21 : PO - Pseudo header Offload:
* 0 - Use the pseudo header value from the TCP checksum field
* 1- Calculate Pseudo header Checksum
* bit 22 : NC - No UDP Checksum
* bit 23..29 : reserved
* bit 30..31 : L4T - Layer 4 Type: 00 - UDP , 10 - TCP , 10, 11 - Reserved
* If L4Len equal 0, no L4 at all
* [dword 1]
* bit 0..31 : addr_low:32 The payload buffer low address
* [dword 2]
* bit 0..15 : addr_high:16 The payload buffer high address
* bit 16..23 : ip_length:8 The IP header length for the TX IP checksum
* offload feature
* bit 24..30 : mac_length:7
* bit 31 : ip_version:1 1 - IPv4, 0 - IPv6
* [dword 3]
* [byte 12] error
* bit 0 2 : mac_status:3
* bit 3 7 : reserved:5
* [byte 13] status
* bit 0 : DU:1 Descriptor Used
* bit 1 7 : reserved:7
* [word 7] length
*/
struct vring_tx_dma {
u32 d0;
struct vring_dma_addr addr;
......@@ -257,45 +291,45 @@ struct vring_tx_dma {
__le16 length;
} __packed;
/*
* Rx descriptor - MAC part
/* Rx descriptor - MAC part
* [dword 0]
* bit 0.. 3 : tid:4 The QoS (b3-0) TID Field
* bit 4.. 6 : connection_id:3 :The Source index that was found during
* Parsing the TA. This field is used to define the source of the packet
* bit 4.. 6 : cid:3 The Source index that was found during parsing the TA.
* This field is used to define the source of the packet
* bit 7 : reserved:1
* bit 8.. 9 : mac_id:2 : The MAC virtual Ring number (always zero)
* bit 10..11 : frame_type:2 : The FC Control (b3-2) - MPDU Type
* (management, data, control and extension)
* bit 12..15 : frame_subtype:4 : The FC Control (b7-4) - Frame Subtype
* bit 8.. 9 : mid:2 The MAC virtual number
* bit 10..11 : frame_type:2 : The FC (b3-2) - MPDU Type
* (management, data, control and extension)
* bit 12..15 : frame_subtype:4 : The FC (b7-4) - Frame Subtype
* bit 16..27 : seq_number:12 The received Sequence number field
* bit 28..31 : extended:4 extended subtype
* [dword 1]
* bit 0.. 3 : reserved
* bit 4.. 5 : key_id:2
* bit 6 : decrypt_bypass:1
* bit 7 : security:1
* bit 8.. 9 : ds_bits:2
* bit 10 : a_msdu_present:1 from qos header
* bit 11 : a_msdu_type:1 from qos header
* bit 7 : security:1 FC (b14)
* bit 8.. 9 : ds_bits:2 FC (b9-8)
* bit 10 : a_msdu_present:1 QoS (b7)
* bit 11 : a_msdu_type:1 QoS (b8)
* bit 12 : a_mpdu:1 part of AMPDU aggregation
* bit 13 : broadcast:1
* bit 14 : mutlicast:1
* bit 15 : reserved:1
* bit 16..20 : rx_mac_qid:5 The Queue Identifier that the packet
* is received from
* bit 16..20 : rx_mac_qid:5 The Queue Identifier that the packet
* is received from
* bit 21..24 : mcs:4
* bit 25..28 : mic_icr:4
* bit 25..28 : mic_icr:4 this signal tells the DMA to assert an interrupt
* after it writes the packet
* bit 29..31 : reserved:3
* [dword 2]
* bit 0.. 2 : time_slot:3 The timeslot that the MPDU is received
* bit 3 : fc_protocol_ver:1 The FC Control (b0) - Protocol Version
* bit 4 : fc_order:1 The FC Control (b15) -Order
* bit 5.. 7 : qos_ack_policy:3 The QoS (b6-5) ack policy Field
* bit 3.. 4 : fc_protocol_ver:1 The FC (b1-0) - Protocol Version
* bit 5 : fc_order:1 The FC Control (b15) -Order
* bit 6.. 7 : qos_ack_policy:2 The QoS (b6-5) ack policy Field
* bit 8 : esop:1 The QoS (b4) ESOP field
* bit 9 : qos_rdg_more_ppdu:1 The QoS (b9) RDG field
* bit 10..14 : qos_reserved:5 The QoS (b14-10) Reserved field
* bit 15 : qos_ac_constraint:1
* bit 9 : qos_rdg_more_ppdu:1 The QoS (b9) RDG field
* bit 10..14 : qos_reserved:5 The QoS (b14-10) Reserved field
* bit 15 : qos_ac_constraint:1 QoS (b15)
* bit 16..31 : pn_15_0:16 low 2 bytes of PN
* [dword 3]
* bit 0..31 : pn_47_16:32 high 4 bytes of PN
......@@ -308,35 +342,46 @@ struct vring_rx_mac {
u32 pn_47_16;
} __packed;
/*
* Rx descriptor - DMA part
/* Rx descriptor - DMA part
* [dword 0]
* bit 0.. 7 : l4_length:8 layer 4 length
* bit 8.. 9 : reserved:2
* bit 10 : cmd_dma_it:1
* bit 0.. 7 : l4_length:8 layer 4 length. The field is only valid if
* L4I bit is set
* bit 8 : cmd_eop:1 set to 1
* bit 9 : cmd_rt:1 set to 1
* bit 10 : cmd_dma_it:1 immediate interrupt
* bit 11..15 : reserved:5
* bit 16..29 : phy_info_length:14
* bit 16..29 : phy_info_length:14 It is valid when the PII is set.
* When the FFM bit is set bits 29-27 are used for for
* Flex Filter Match. Matching Index to one of the L2
* EtherType Flex Filter
* bit 30..31 : l4_type:2 valid if the L4I bit is set in the status field
* 00 - UDP, 01 - TCP, 10, 11 - reserved
* [dword 1]
* bit 0..31 : addr_low:32 The payload buffer low address
* [dword 2]
* bit 0..15 : addr_high:16 The payload buffer high address
* bit 16..23 : ip_length:8
* bit 16..23 : ip_length:8 The filed is valid only if the L3I bit is set
* bit 24..30 : mac_length:7
* bit 31 : ip_version:1
* bit 31 : ip_version:1 1 - IPv4, 0 - IPv6
* [dword 3]
* [byte 12] error
* bit 0 : FCS:1
* bit 1 : MIC:1
* bit 2 : Key miss:1
* bit 3 : Replay:1
* bit 4 : L3:1 IPv4 checksum
* bit 5 : L4:1 TCP/UDP checksum
* bit 6 7 : reserved:2
* [byte 13] status
* bit 0 : du:1
* bit 1 : eop:1
* bit 0 : DU:1 Descriptor Used
* bit 1 : EOP:1 The descriptor indicates the End of Packet
* bit 2 : error:1
* bit 3 : mi:1
* bit 4 : l3_identified:1
* bit 5 : l4_identified:1
* bit 6 : phy_info_included:1
* bit 7 : reserved:1
* bit 3 : MI:1 MAC Interrupt is asserted (according to parser decision)
* bit 4 : L3I:1 L3 identified and checksum calculated
* bit 5 : L4I:1 L4 identified and checksum calculated
* bit 6 : PII:1 PHY Info Included in the packet
* bit 7 : FFM:1 EtherType Flex Filter Match
* [word 7] length
*
*/
#define RX_DMA_D0_CMD_DMA_IT BIT(10)
......@@ -349,9 +394,9 @@ struct vring_rx_mac {
#define RX_DMA_STATUS_DU BIT(0)
#define RX_DMA_STATUS_ERROR BIT(2)
#define RX_DMA_STATUS_L3_IDENT BIT(4)
#define RX_DMA_STATUS_L4_IDENT BIT(5)
#define RX_DMA_STATUS_PHY_INFO BIT(6)
#define RX_DMA_STATUS_L3I BIT(4)
#define RX_DMA_STATUS_L4I BIT(5)
#define RX_DMA_STATUS_PHY_INFO BIT(6)
struct vring_rx_dma {
u32 d0;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7