Merge branch 'omap2-upstream' of...

Merge branch 'omap2-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into omap-all

arch/arm/mach-omap1/devices.c

@@ -101,7 +101,7 @@ static inline void omap_init_mbox(void) { }
 
 #if defined(CONFIG_OMAP_STI)
 
-#define OMAP1_STI_BASE		IO_ADDRESS(0xfffea000)
+#define OMAP1_STI_BASE		0xfffea000
 #define OMAP1_STI_CHANNEL_BASE	(OMAP1_STI_BASE + 0x400)
 
 static struct resource sti_resources[] = {

arch/arm/mach-omap2/Makefile

@@ -14,7 +14,10 @@ obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
 
 # Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+ifeq ($(CONFIG_PM),y)
+obj-y					+= pm.o
+obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
+endif
 
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o

arch/arm/mach-omap2/clock.h

@@ -21,6 +21,7 @@
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000
 
+int omap2_clk_init(void);
 int omap2_clk_enable(struct clk *clk);
 void omap2_clk_disable(struct clk *clk);
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate);

arch/arm/mach-omap2/devices.c

@@ -23,50 +23,7 @@
 #include <mach/board.h>
 #include <mach/mux.h>
 #include <mach/gpio.h>
-
-#if	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define OMAP2_I2C_BASE2		0x48072000
-#define OMAP2_I2C_INT2		57
-
-static struct resource i2c_resources2[] = {
-	{
-		.start		= OMAP2_I2C_BASE2,
-		.end		= OMAP2_I2C_BASE2 + 0x3f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP2_I2C_INT2,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device omap_i2c_device2 = {
-	.name           = "i2c_omap",
-	.id             = 2,
-	.num_resources	= ARRAY_SIZE(i2c_resources2),
-	.resource	= i2c_resources2,
-};
-
-/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */
-static void omap_init_i2c(void)
-{
-	/* REVISIT: Second I2C not in use on H4? */
-	if (machine_is_omap_h4())
-		return;
-
-	if (!cpu_is_omap2430()) {
-		omap_cfg_reg(J15_24XX_I2C2_SCL);
-		omap_cfg_reg(H19_24XX_I2C2_SDA);
-	}
-	(void) platform_device_register(&omap_i2c_device2);
-}
-
-#else
-
-static void omap_init_i2c(void) {}
-
-#endif
+#include <mach/eac.h>
 
 #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 #define OMAP2_MBOX_BASE		IO_ADDRESS(OMAP24XX_MAILBOX_BASE)
@@ -104,7 +61,9 @@ static inline void omap_init_mbox(void) { }
 
 #if defined(CONFIG_OMAP_STI)
 
-#define OMAP2_STI_BASE		IO_ADDRESS(0x48068000)
+#if defined(CONFIG_ARCH_OMAP2)
+
+#define OMAP2_STI_BASE		0x48068000
 #define OMAP2_STI_CHANNEL_BASE	0x54000000
 #define OMAP2_STI_IRQ		4
 
@@ -124,6 +83,25 @@ static struct resource sti_resources[] = {
 		.flags		= IORESOURCE_IRQ,
 	}
 };
+#elif defined(CONFIG_ARCH_OMAP3)
+
+#define OMAP3_SDTI_BASE		0x54500000
+#define OMAP3_SDTI_CHANNEL_BASE	0x54600000
+
+static struct resource sti_resources[] = {
+	{
+		.start		= OMAP3_SDTI_BASE,
+		.end		= OMAP3_SDTI_BASE + 0xFFF,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3_SDTI_CHANNEL_BASE,
+		.end		= OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+#endif
 
 static struct platform_device sti_device = {
 	.name		= "sti",
@@ -140,12 +118,14 @@ static inline void omap_init_sti(void)
 static inline void omap_init_sti(void) {}
 #endif
 
-#if defined(CONFIG_SPI_OMAP24XX)
+#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
 #include <mach/mcspi.h>
 
 #define OMAP2_MCSPI1_BASE		0x48098000
 #define OMAP2_MCSPI2_BASE		0x4809a000
+#define OMAP2_MCSPI3_BASE		0x480b8000
+#define OMAP2_MCSPI4_BASE		0x480ba000
 
 static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
 	.num_cs		= 4,
@@ -159,7 +139,7 @@ static struct resource omap2_mcspi1_resources[] = {
 	},
 };
 
-struct platform_device omap2_mcspi1 = {
+static struct platform_device omap2_mcspi1 = {
 	.name		= "omap2_mcspi",
 	.id		= 1,
 	.num_resources	= ARRAY_SIZE(omap2_mcspi1_resources),
@@ -181,7 +161,7 @@ static struct resource omap2_mcspi2_resources[] = {
 	},
 };
 
-struct platform_device omap2_mcspi2 = {
+static struct platform_device omap2_mcspi2 = {
 	.name		= "omap2_mcspi",
 	.id		= 2,
 	.num_resources	= ARRAY_SIZE(omap2_mcspi2_resources),
@@ -191,16 +171,162 @@ struct platform_device omap2_mcspi2 = {
 	},
 };
 
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+static struct omap2_mcspi_platform_config omap2_mcspi3_config = {
+	.num_cs		= 2,
+};
+
+static struct resource omap2_mcspi3_resources[] = {
+	{
+	.start		= OMAP2_MCSPI3_BASE,
+	.end		= OMAP2_MCSPI3_BASE + 0xff,
+	.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap2_mcspi3 = {
+	.name		= "omap2_mcspi",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(omap2_mcspi3_resources),
+	.resource	= omap2_mcspi3_resources,
+	.dev		= {
+		.platform_data = &omap2_mcspi3_config,
+	},
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap2_mcspi_platform_config omap2_mcspi4_config = {
+	.num_cs		= 1,
+};
+
+static struct resource omap2_mcspi4_resources[] = {
+	{
+		.start		= OMAP2_MCSPI4_BASE,
+		.end		= OMAP2_MCSPI4_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap2_mcspi4 = {
+	.name		= "omap2_mcspi",
+	.id		= 4,
+	.num_resources	= ARRAY_SIZE(omap2_mcspi4_resources),
+	.resource	= omap2_mcspi4_resources,
+	.dev		= {
+		.platform_data = &omap2_mcspi4_config,
+	},
+};
+#endif
+
 static void omap_init_mcspi(void)
 {
 	platform_device_register(&omap2_mcspi1);
 	platform_device_register(&omap2_mcspi2);
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+	platform_device_register(&omap2_mcspi3);
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+	platform_device_register(&omap2_mcspi4);
+#endif
 }
 
 #else
 static inline void omap_init_mcspi(void) {}
 #endif
 
+#ifdef CONFIG_SND_OMAP24XX_EAC
+
+#define OMAP2_EAC_BASE			0x48090000
+
+static struct resource omap2_eac_resources[] = {
+	{
+		.start		= OMAP2_EAC_BASE,
+		.end		= OMAP2_EAC_BASE + 0x109,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap2_eac_device = {
+	.name		= "omap24xx-eac",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap2_eac_resources),
+	.resource	= omap2_eac_resources,
+	.dev = {
+		.platform_data = NULL,
+	},
+};
+
+void omap_init_eac(struct eac_platform_data *pdata)
+{
+	omap2_eac_device.dev.platform_data = pdata;
+	platform_device_register(&omap2_eac_device);
+}
+
+#else
+void omap_init_eac(struct eac_platform_data *pdata) {}
+#endif
+
+#ifdef CONFIG_OMAP_SHA1_MD5
+static struct resource sha1_md5_resources[] = {
+	{
+		.start	= OMAP24XX_SEC_SHA1MD5_BASE,
+		.end	= OMAP24XX_SEC_SHA1MD5_BASE + 0x64,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_24XX_SHA1MD5,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device sha1_md5_device = {
+	.name		= "OMAP SHA1/MD5",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(sha1_md5_resources),
+	.resource	= sha1_md5_resources,
+};
+
+static void omap_init_sha1_md5(void)
+{
+	platform_device_register(&sha1_md5_device);
+}
+#else
+static inline void omap_init_sha1_md5(void) { }
+#endif
+
+#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#define OMAP_HDQ_BASE	0x480B2000
+#endif
+static struct resource omap_hdq_resources[] = {
+	{
+		.start		= OMAP_HDQ_BASE,
+		.end		= OMAP_HDQ_BASE + 0x1C,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_24XX_HDQ_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+static struct platform_device omap_hdq_dev = {
+	.name = "omap_hdq",
+	.id = 0,
+	.dev = {
+		.platform_data = NULL,
+	},
+	.num_resources	= ARRAY_SIZE(omap_hdq_resources),
+	.resource	= omap_hdq_resources,
+};
+static inline void omap_hdq_init(void)
+{
+	(void) platform_device_register(&omap_hdq_dev);
+}
+#else
+static inline void omap_hdq_init(void) {}
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 static int __init omap2_init_devices(void)
@@ -208,10 +334,11 @@ static int __init omap2_init_devices(void)
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
-	omap_init_i2c();
 	omap_init_mbox();
 	omap_init_mcspi();
+	omap_hdq_init();
 	omap_init_sti();
+	omap_init_sha1_md5();
 
 	return 0;
 }

arch/arm/mach-omap2/gpmc.c

@@ -9,27 +9,23 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#undef DEBUG
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/ioport.h>
 #include <linux/spinlock.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <mach/gpmc.h>
 
-#undef DEBUG
-
-#ifdef CONFIG_ARCH_OMAP2420
-#define GPMC_BASE		0x6800a000
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2430
-#define GPMC_BASE		0x6E000000
-#endif
+#include <mach/sdrc.h>
 
+/* GPMC register offsets */
 #define GPMC_REVISION		0x00
 #define GPMC_SYSCONFIG		0x10
 #define GPMC_SYSSTATUS		0x14
@@ -51,7 +47,6 @@
 #define GPMC_CS0		0x60
 #define GPMC_CS_SIZE		0x30
 
-#define GPMC_CS_NUM		8
 #define GPMC_MEM_START		0x00000000
 #define GPMC_MEM_END		0x3FFFFFFF
 #define BOOT_ROM_SPACE		0x100000	/* 1MB */
@@ -64,10 +59,9 @@ static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
 static unsigned		gpmc_cs_map;
 
-static void __iomem *gpmc_base = IO_ADDRESS(GPMC_BASE);
-static void __iomem *gpmc_cs_base = IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
+static void __iomem *gpmc_base;
 
-static struct clk *gpmc_fck;
+static struct clk *gpmc_l3_clk;
 
 static void gpmc_write_reg(int idx, u32 val)
 {
@@ -83,19 +77,32 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val)
 {
 	void __iomem *reg_addr;
 
-	reg_addr = gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx;
+	reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
 	__raw_writel(val, reg_addr);
 }
 
 u32 gpmc_cs_read_reg(int cs, int idx)
 {
-	return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx);
+	void __iomem *reg_addr;
+
+	reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
+	return __raw_readl(reg_addr);
 }
 
+/* TODO: Add support for gpmc_fck to clock framework and use it */
 unsigned long gpmc_get_fclk_period(void)
 {
-	/* In picoseconds */
-	return 1000000000 / ((clk_get_rate(gpmc_fck)) / 1000);
+	unsigned long rate = clk_get_rate(gpmc_l3_clk);
+
+	if (rate == 0) {
+		printk(KERN_WARNING "gpmc_l3_clk not enabled\n");
+		return 0;
+	}
+
+	rate /= 1000;
+	rate = 1000000000 / rate;	/* In picoseconds */
+
+	return rate;
 }
 
 unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
@@ -108,6 +115,11 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
 	return (time_ns * 1000 + tick_ps - 1) / tick_ps;
 }
 
+unsigned int gpmc_ticks_to_ns(unsigned int ticks)
+{
+	return ticks * gpmc_get_fclk_period() / 1000;
+}
+
 unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns)
 {
 	unsigned long ticks = gpmc_ns_to_ticks(time_ns);
@@ -348,6 +360,7 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
 	spin_unlock(&gpmc_mem_lock);
 	return r;
 }
+EXPORT_SYMBOL(gpmc_cs_request);
 
 void gpmc_cs_free(int cs)
 {
@@ -363,8 +376,9 @@ void gpmc_cs_free(int cs)
 	gpmc_cs_set_reserved(cs, 0);
 	spin_unlock(&gpmc_mem_lock);
 }
+EXPORT_SYMBOL(gpmc_cs_free);
 
-void __init gpmc_mem_init(void)
+static void __init gpmc_mem_init(void)
 {
 	int cs;
 	unsigned long boot_rom_space = 0;
@@ -394,12 +408,33 @@ void __init gpmc_mem_init(void)
 void __init gpmc_init(void)
 {
 	u32 l;
+	char *ck;
+
+	if (cpu_is_omap24xx()) {
+		ck = "core_l3_ck";
+		if (cpu_is_omap2420())
+			l = OMAP2420_GPMC_BASE;
+		else
+			l = OMAP34XX_GPMC_BASE;
+	} else if (cpu_is_omap34xx()) {
+		ck = "gpmc_fck";
+		l = OMAP34XX_GPMC_BASE;
+	}
 
-	gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
-	if (IS_ERR(gpmc_fck))
-		WARN_ON(1);
-	else
-		clk_enable(gpmc_fck);
+	gpmc_l3_clk = clk_get(NULL, ck);
+	if (IS_ERR(gpmc_l3_clk)) {
+		printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
+		return -ENODEV;
+	}
+
+	gpmc_base = ioremap(l, SZ_4K);
+	if (!gpmc_base) {
+		clk_put(gpmc_l3_clk);
+		printk(KERN_ERR "Could not get GPMC register memory\n");
+		return -ENOMEM;
+	}
+
+	BUG_ON(IS_ERR(gpmc_l3_clk));
 
 	l = gpmc_read_reg(GPMC_REVISION);
 	printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);

arch/arm/mach-omap2/id.c

@@ -17,24 +17,15 @@
 
 #include <asm/io.h>
 
+#include <mach/common.h>
 #include <mach/control.h>
 #include <mach/cpu.h>
 
-#if defined(CONFIG_ARCH_OMAP2420)
-#define TAP_BASE	IO_ADDRESS(0x48014000)
-#elif defined(CONFIG_ARCH_OMAP2430)
-#define TAP_BASE	IO_ADDRESS(0x4900A000)
-#elif defined(CONFIG_ARCH_OMAP34XX)
-#define TAP_BASE	IO_ADDRESS(0x4830A000)
-#endif
+static u32 class;
+static void __iomem *tap_base;
+static u16 tap_prod_id;
 
 #define OMAP_TAP_IDCODE		0x0204
-#if defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP_TAP_PROD_ID	0x0210
-#else
-#define OMAP_TAP_PROD_ID	0x0208
-#endif
-
 #define OMAP_TAP_DIE_ID_0	0x0218
 #define OMAP_TAP_DIE_ID_1	0x021C
 #define OMAP_TAP_DIE_ID_2	0x0220
@@ -93,18 +84,24 @@ static u32 __init read_tap_reg(int reg)
 	 * it means its Cortex r0p0 which is 3430 ES1
 	 */
 	if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) {
+
+		if (reg == tap_prod_id) {
+			regval = 0x000F00F0;
+			goto out;
+		}
+
 		switch (reg) {
 		case OMAP_TAP_IDCODE  : regval = 0x0B7AE02F; break;
 		/* Making DevType as 0xF in ES1 to differ from ES2 */
-		case OMAP_TAP_PROD_ID : regval = 0x000F00F0; break;
 		case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break;
 		case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break;
 		case OMAP_TAP_DIE_ID_2:	regval = 0x00000000; break;
 		case OMAP_TAP_DIE_ID_3:	regval = 0x2d2c0000; break;
 		}
 	} else
-		regval = __raw_readl(TAP_BASE + reg);
+		regval = __raw_readl(tap_base + reg);
 
+out:
 	return regval;
 
 }
@@ -203,7 +200,7 @@ void __init omap2_check_revision(void)
 	u8  rev;
 
 	idcode = read_tap_reg(OMAP_TAP_IDCODE);
-	prod_id = read_tap_reg(OMAP_TAP_PROD_ID);
+	prod_id = read_tap_reg(tap_prod_id);
 	hawkeye = (idcode >> 12) & 0xffff;
 	rev = (idcode >> 28) & 0x0f;
 	dev_type = (prod_id >> 16) & 0x0f;
@@ -268,3 +265,13 @@ void __init omap2_check_revision(void)
 
 }
 
+void __init omap2_set_globals_tap(struct omap_globals *omap2_globals)
+{
+	class = omap2_globals->class;
+	tap_base = omap2_globals->tap;
+
+	if (class == 0x3430)
+		tap_prod_id = 0x0210;
+	else
+		tap_prod_id = 0x0208;
+}

arch/arm/mach-omap2/io.c

@@ -4,8 +4,11 @@
  * OMAP2 I/O mapping code
  *
  * Copyright (C) 2005 Nokia Corporation
- * Author: Juha Yrjl <juha.yrjola@nokia.com>
- * Updated map desc to add 2430 support : <x0khasim@ti.com>
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Author:
+ *	Juha Yrjola <juha.yrjola@nokia.com>
+ *	Syed Khasim <x0khasim@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -23,6 +26,11 @@
 
 #include <mach/mux.h>
 #include <mach/omapfb.h>
+#include <mach/sram.h>
+
+#include "memory.h"
+
+#include "clock.h"
 
 #include <mach/powerdomain.h>
 
@@ -31,13 +39,6 @@
 #include <mach/clockdomain.h>
 #include "clockdomains.h"
 
-extern void omap_sram_init(void);
-extern int omap2_clk_init(void);
-extern void omap2_check_revision(void);
-extern void omap2_init_memory(void);
-extern void gpmc_init(void);
-extern void omapfb_reserve_sdram(void);
-
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.

arch/arm/mach-omap2/irq.c

@@ -13,17 +13,23 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 #include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
 
-#define INTC_REVISION	0x0000
-#define INTC_SYSCONFIG	0x0010
-#define INTC_SYSSTATUS	0x0014
-#define INTC_CONTROL	0x0048
-#define INTC_MIR_CLEAR0	0x0088
-#define INTC_MIR_SET0	0x008c
+
+/* selected INTC register offsets */
+
+#define INTC_REVISION		0x0000
+#define INTC_SYSCONFIG		0x0010
+#define INTC_SYSSTATUS		0x0014
+#define INTC_CONTROL		0x0048
+#define INTC_MIR_CLEAR0		0x0088
+#define INTC_MIR_SET0		0x008c
+#define INTC_PENDING_IRQ0	0x0098
+
+/* Number of IRQ state bits in each MIR register */
+#define IRQ_BITS_PER_REG	32
 
 /*
  * OMAP2 has a number of different interrupt controllers, each interrupt
@@ -37,43 +43,45 @@ static struct omap_irq_bank {
 } __attribute__ ((aligned(4))) irq_banks[] = {
 	{
 		/* MPU INTC */
-		.base_reg	= IO_ADDRESS(OMAP24XX_IC_BASE),
+		.base_reg	= 0,
 		.nr_irqs	= 96,
-	}, {
-		/* XXX: DSP INTC */
-	}
+	},
 };
 
+/* INTC bank register get/set */
+
+static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
+{
+	__raw_writel(val, bank->base_reg + reg);
+}
+
+static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
+{
+	return __raw_readl(bank->base_reg + reg);
+}
+
 /* XXX: FIQ and additional INTC support (only MPU at the moment) */
 static void omap_ack_irq(unsigned int irq)
 {
-	__raw_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL);
+	intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL);
 }
 
 static void omap_mask_irq(unsigned int irq)
 {
-	int offset = (irq >> 5) << 5;
+	int offset = irq & (~(IRQ_BITS_PER_REG - 1));
 
-	if (irq >= 64) {
-		irq %= 64;
-	} else if (irq >= 32) {
-		irq %= 32;
-	}
+	irq &= (IRQ_BITS_PER_REG - 1);
 
-	__raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset);
+	intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset);
 }
 
 static void omap_unmask_irq(unsigned int irq)
 {
-	int offset = (irq >> 5) << 5;
+	int offset = irq & (~(IRQ_BITS_PER_REG - 1));
 
-	if (irq >= 64) {
-		irq %= 64;
-	} else if (irq >= 32) {
-		irq %= 32;
-	}
+	irq &= (IRQ_BITS_PER_REG - 1);
 
-	__raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset);
+	intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset);
 }
 
 static void omap_mask_ack_irq(unsigned int irq)
@@ -93,20 +101,20 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
 {
 	unsigned long tmp;
 
-	tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff;
+	tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
 	printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
 			 "(revision %ld.%ld) with %d interrupts\n",
 			 bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
 
-	tmp = __raw_readl(bank->base_reg + INTC_SYSCONFIG);
+	tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
 	tmp |= 1 << 1;	/* soft reset */
-	__raw_writel(tmp, bank->base_reg + INTC_SYSCONFIG);
+	intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG);
 
-	while (!(__raw_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1))
+	while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1))
 		/* Wait for reset to complete */;
 
 	/* Enable autoidle */
-	__raw_writel(1 << 0, bank->base_reg + INTC_SYSCONFIG);
+	intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
 }
 
 void __init omap_init_irq(void)
@@ -118,9 +126,8 @@ void __init omap_init_irq(void)
 	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
 		struct omap_irq_bank *bank = irq_banks + i;
 
-		/* XXX */
-		if (!bank->base_reg)
-			continue;
+		if (cpu_is_omap24xx())
+			bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
 
 		omap_irq_bank_init_one(bank);
 

arch/arm/mach-omap2/memory.h

@@ -14,6 +14,9 @@
  * published by the Free Software Foundation.
  */
 
+#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H
+#define ARCH_ARM_MACH_OMAP2_MEMORY_H
+
 /* Memory timings */
 #define M_DDR		1
 #define M_LOCK_CTRL	(1 << 2)
@@ -34,3 +37,7 @@ extern u32 omap2_memory_get_fast_dll_ctrl(void);
 extern u32 omap2_memory_get_type(void);
 u32 omap2_dll_force_needed(void);
 u32 omap2_reprogram_sdrc(u32 level, u32 force);
+void __init omap2_init_memory(void);
+void __init gpmc_init(void);
+
+#endif

arch/arm/mach-omap2/mux.c

 /*
  * linux/arch/arm/mach-omap2/mux.c
  *
- * OMAP2 pin multiplexing configurations
+ * OMAP2 and OMAP3 pin multiplexing configurations
  *
  * Copyright (C) 2004 - 2008 Texas Instruments Inc.
  * Copyright (C) 2003 - 2008 Nokia Corporation
@@ -219,16 +219,179 @@ MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF",	0x0131,	0,	0,	0,	1)
 #define OMAP24XX_PINS_SZ	0
 #endif	/* CONFIG_ARCH_OMAP24XX */
 
-#define OMAP24XX_PULL_ENA	(1 << 3)
-#define OMAP24XX_PULL_UP	(1 << 4)
+#ifdef CONFIG_ARCH_OMAP34XX
+static struct pin_config __initdata_or_module omap34xx_pins[] = {
+/*
+ *		Name, reg-offset,
+ *		mux-mode | [active-mode | off-mode]
+ */
+
+/* 34xx I2C */
+MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
+MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
+MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* TLL - HSUSB: 12-pin TLL Port 1*/
+MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* TLL - HSUSB: 12-pin TLL Port 2*/
+MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* TLL - HSUSB: 12-pin TLL Port 3*/
+MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+};
+
+#define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
+
+#else
+#define omap34xx_pins		NULL
+#define OMAP34XX_PINS_SZ	0
+#endif	/* CONFIG_ARCH_OMAP34XX */
 
 #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg)
+static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg)
 {
 	u16 orig;
 	u8 warn = 0, debug = 0;
 
-	orig = omap_ctrl_readb(cfg->mux_reg);
+	if (cpu_is_omap24xx())
+		orig = omap_ctrl_readb(cfg->mux_reg);
+	else
+		orig = omap_ctrl_readw(cfg->mux_reg);
 
 #ifdef	CONFIG_OMAP_MUX_DEBUG
 	debug = cfg->debug;
@@ -254,9 +417,9 @@ int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
 	spin_lock_irqsave(&mux_spin_lock, flags);
 	reg |= cfg->mask & 0x7;
 	if (cfg->pull_val)
-		reg |= OMAP24XX_PULL_ENA;
+		reg |= OMAP2_PULL_ENA;
 	if (cfg->pu_pd_val)
-		reg |= OMAP24XX_PULL_UP;
+		reg |= OMAP2_PULL_UP;
 	omap2_cfg_debug(cfg, reg);
 	omap_ctrl_writeb(reg, cfg->mux_reg);
 	spin_unlock_irqrestore(&mux_spin_lock, flags);
@@ -264,7 +427,26 @@ int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
 	return 0;
 }
 #else
-#define omap24xx_cfg_reg	0
+#define omap24xx_cfg_reg	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg)
+{
+	static DEFINE_SPINLOCK(mux_spin_lock);
+	unsigned long flags;
+	u16 reg = 0;
+
+	spin_lock_irqsave(&mux_spin_lock, flags);
+	reg |= cfg->mux_val;
+	omap2_cfg_debug(cfg, reg);
+	omap_ctrl_writew(reg, cfg->mux_reg);
+	spin_unlock_irqrestore(&mux_spin_lock, flags);
+
+	return 0;
+}
+#else
+#define omap34xx_cfg_reg	NULL
 #endif
 
 int __init omap2_mux_init(void)
@@ -273,6 +455,10 @@ int __init omap2_mux_init(void)
 		arch_mux_cfg.pins	= omap24xx_pins;
 		arch_mux_cfg.size	= OMAP24XX_PINS_SZ;
 		arch_mux_cfg.cfg_reg	= omap24xx_cfg_reg;
+	} else if (cpu_is_omap34xx()) {
+		arch_mux_cfg.pins	= omap34xx_pins;
+		arch_mux_cfg.size	= OMAP34XX_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap34xx_cfg_reg;
 	}
 
 	return omap_mux_register(&arch_mux_cfg);

arch/arm/mach-omap2/serial.c

@@ -3,7 +3,7 @@
  *
  * OMAP2 serial support.
  *
- * Copyright (C) 2005 Nokia Corporation
+ * Copyright (C) 2005-2008 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *
  * Based off of arch/arm/mach-omap/omap1/serial.c
@@ -23,12 +23,8 @@
 #include <mach/common.h>
 #include <mach/board.h>
 
-static struct clk * uart1_ick = NULL;
-static struct clk * uart1_fck = NULL;
-static struct clk * uart2_ick = NULL;
-static struct clk * uart2_fck = NULL;
-static struct clk * uart3_ick = NULL;
-static struct clk * uart3_fck = NULL;
+static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
+static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
@@ -38,7 +34,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
 		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
@@ -46,7 +42,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
 		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
@@ -54,7 +50,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
 		.flags		= 0
 	}
@@ -87,10 +83,27 @@ static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
 	serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
 }
 
-void __init omap_serial_init()
+void omap_serial_enable_clocks(int enable)
+{
+	int i;
+	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+		if (uart_ick[i] && uart_fck[i]) {
+			if (enable) {
+				clk_enable(uart_ick[i]);
+				clk_enable(uart_fck[i]);
+			} else {
+				clk_disable(uart_ick[i]);
+				clk_disable(uart_fck[i]);
+			}
+		}
+	}
+}
+
+void __init omap_serial_init(void)
 {
 	int i;
 	const struct omap_uart_config *info;
+	char name[16];
 
 	/*
 	 * Make sure the serial ports are muxed on at this point.
@@ -98,8 +111,7 @@ void __init omap_serial_init()
 	 * if not needed.
 	 */
 
-	info = omap_get_config(OMAP_TAG_UART,
-			       struct omap_uart_config);
+	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
 
 	if (info == NULL)
 		return;
@@ -113,53 +125,21 @@ void __init omap_serial_init()
 			continue;
 		}
 
-		switch (i) {
-		case 0:
-			uart1_ick = clk_get(NULL, "uart1_ick");
-			if (IS_ERR(uart1_ick))
-				printk("Could not get uart1_ick\n");
-			else {
-				clk_enable(uart1_ick);
-			}
-
-			uart1_fck = clk_get(NULL, "uart1_fck");
-			if (IS_ERR(uart1_fck))
-				printk("Could not get uart1_fck\n");
-			else {
-				clk_enable(uart1_fck);
-			}
-			break;
-		case 1:
-			uart2_ick = clk_get(NULL, "uart2_ick");
-			if (IS_ERR(uart2_ick))
-				printk("Could not get uart2_ick\n");
-			else {
-				clk_enable(uart2_ick);
-			}
-
-			uart2_fck = clk_get(NULL, "uart2_fck");
-			if (IS_ERR(uart2_fck))
-				printk("Could not get uart2_fck\n");
-			else {
-				clk_enable(uart2_fck);
-			}
-			break;
-		case 2:
-			uart3_ick = clk_get(NULL, "uart3_ick");
-			if (IS_ERR(uart3_ick))
-				printk("Could not get uart3_ick\n");
-			else {
-				clk_enable(uart3_ick);
-			}
-
-			uart3_fck = clk_get(NULL, "uart3_fck");
-			if (IS_ERR(uart3_fck))
-				printk("Could not get uart3_fck\n");
-			else {
-				clk_enable(uart3_fck);
-			}
-			break;
-		}
+		sprintf(name, "uart%d_ick", i+1);
+		uart_ick[i] = clk_get(NULL, name);
+		if (IS_ERR(uart_ick[i])) {
+			printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
+			uart_ick[i] = NULL;
+		} else
+			clk_enable(uart_ick[i]);
+
+		sprintf(name, "uart%d_fck", i+1);
+		uart_fck[i] = clk_get(NULL, name);
+		if (IS_ERR(uart_fck[i])) {
+			printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
+			uart_fck[i] = NULL;
+		} else
+			clk_enable(uart_fck[i]);
 
 		omap_serial_reset(p);
 	}

arch/arm/mach-omap2/sleep.S → arch/arm/mach-omap2/sleep24xx.S

@@ -5,6 +5,10 @@
  * Texas Instruments, <www.ti.com>
  * Richard Woodruff <r-woodruff2@ti.com>
  *
+ * (C) Copyright 2006 Nokia Corporation
+ * Fixed idle loop sleep
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
@@ -26,6 +30,8 @@
 #include <mach/io.h>
 #include <mach/pm.h>
 
+#include <mach/omap24xx.h>
+
 #include "sdrc.h"
 
 /* First address of reserved address space?  apparently valid for OMAP2 & 3 */
@@ -52,15 +58,14 @@ ENTRY(omap24xx_idle_loop_suspend_sz)
 	.word	. - omap24xx_idle_loop_suspend
 
 /*
- * omap242x_cpu_suspend() - Forces OMAP into deep sleep state by completing
+ * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing
  * SDRC shutdown then ARM shutdown.  Upon wake MPU is back on so just restore
  * SDRC.
  *
  * Input:
  * R0 :	DLL ctrl value pre-Sleep
- * R1 : Processor+Revision
- *	2420: 0x21 = 242xES1, 0x26 = 242xES2.2
- *	2430: 0x31 = 2430ES1, 0x32 = 2430ES2
+ * R1 : SDRC_DLLA_CTRL
+ * R2 : SDRC_POWER
  *
  * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
  * when we get called, but the DLL probably isn't.  We will wait a bit more in
@@ -80,15 +85,14 @@ ENTRY(omap24xx_idle_loop_suspend_sz)
  */
 ENTRY(omap24xx_cpu_suspend)
 	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
-	mov	r3, #0x0		@ clear for mrc call
+	mov	r3, #0x0		@ clear for mcr call
 	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier, hope SDR/DDR finished
 	nop
 	nop
-	ldr	r3, A_SDRC_POWER	@ addr of sdrc power
-	ldr	r4, [r3]		@ value of sdrc power
+	ldr	r4, [r2]		@ read SDRC_POWER
 	orr	r4, r4, #0x40		@ enable self refresh on idle req
 	mov	r5, #0x2000		@ set delay (DPLL relock + DLL relock)
-	str	r4, [r3]		@ make it so
+	str	r4, [r2]		@ make it so
 	mov	r2, #0
 	nop
 	mcr	p15, 0, r2, c7, c0, 4	@ wait for interrupt
@@ -97,14 +101,13 @@ loop:
 	subs	r5, r5, #0x1		@ awake, wait just a bit
 	bne	loop
 
-	/* The DPLL has on before we take the DDR out of self refresh */
+	/* The DPLL has to be on before we take the DDR out of self refresh */
 	bic	r4, r4, #0x40		@ now clear self refresh bit.
-	str	r4, [r3]		@ put vlaue back.
+	str	r4, [r2]		@ write to SDRC_POWER
 	ldr	r4, A_SDRC0		@ make a clock happen
-	ldr	r4, [r4]
+	ldr	r4, [r4]		@ read A_SDRC0
 	nop				@ start auto refresh only after clk ok
 	movs	r0, r0			@ see if DDR or SDR
-	ldrne	r1, A_SDRC_DLLA_CTRL_S	@ get addr of DLL ctrl
 	strne	r0, [r1]		@ rewrite DLLA to force DLL reload
 	addne	r1, r1, #0x8		@ move to DLLB
 	strne	r0, [r1]		@ rewrite DLLB to force DLL reload
@@ -116,13 +119,8 @@ loop2:
 	/* resume*/
 	ldmfd	sp!, {r0 - r12, pc}	@ restore regs and return
 
-A_SDRC_POWER:
-	.word OMAP242X_SDRC_REGADDR(SDRC_POWER)
 A_SDRC0:
 	.word A_SDRC0_V
-A_SDRC_DLLA_CTRL_S:
-	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
 ENTRY(omap24xx_cpu_suspend_sz)
 	.word	. - omap24xx_cpu_suspend
-

arch/arm/plat-omap/common.c

@@ -248,6 +248,7 @@ static struct omap_globals *omap2_globals;
 
 static void __init __omap2_set_globals(void)
 {
+	omap2_set_globals_tap(omap2_globals);
 	omap2_set_globals_memory(omap2_globals);
 	omap2_set_globals_control(omap2_globals);
 	omap2_set_globals_prcm(omap2_globals);
@@ -258,6 +259,7 @@ static void __init __omap2_set_globals(void)
 #if defined(CONFIG_ARCH_OMAP2420)
 
 static struct omap_globals omap242x_globals = {
+	.class	= OMAP242X_CLASS,
 	.tap	= OMAP2_IO_ADDRESS(0x48014000),
 	.sdrc	= OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
 	.sms	= OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
@@ -276,6 +278,7 @@ void __init omap2_set_globals_242x(void)
 #if defined(CONFIG_ARCH_OMAP2430)
 
 static struct omap_globals omap243x_globals = {
+	.class	= OMAP243X_CLASS,
 	.tap	= OMAP2_IO_ADDRESS(0x4900a000),
 	.sdrc	= OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
 	.sms	= OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
@@ -294,6 +297,7 @@ void __init omap2_set_globals_243x(void)
 #if defined(CONFIG_ARCH_OMAP3430)
 
 static struct omap_globals omap343x_globals = {
+	.class	= OMAP343X_CLASS,
 	.tap	= OMAP2_IO_ADDRESS(0x4830A000),
 	.sdrc	= OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
 	.sms	= OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),

arch/arm/plat-omap/devices.c

@@ -20,16 +20,16 @@
 #include <asm/mach/map.h>
 
 #include <mach/tc.h>
+#include <mach/control.h>
 #include <mach/board.h>
 #include <mach/mux.h>
 #include <mach/gpio.h>
 #include <mach/menelaus.h>
 #include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
 
 #if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
-#include "../plat-omap/dsp/dsp_common.h"
-
 static struct dsp_platform_data dsp_pdata = {
 	.kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list),
 };
@@ -75,7 +75,7 @@ int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev)
 {
 	static DEFINE_MUTEX(dsp_pdata_lock);
 
-	mutex_init(&kdev->lock);
+	spin_lock_init(&kdev->lock);
 
 	mutex_lock(&dsp_pdata_lock);
 	list_add_tail(&kdev->entry, &dsp_pdata.kdev_list);
@@ -479,10 +479,6 @@ static inline void omap_init_rng(void) {}
  */
 static int __init omap_init_devices(void)
 {
-/*
- * Need to enable relevant once for 2430 SDP
- */
-#ifndef CONFIG_MACH_OMAP_2430SDP
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
@@ -492,7 +488,6 @@ static int __init omap_init_devices(void)
 	omap_init_uwire();
 	omap_init_wdt();
 	omap_init_rng();
-#endif
 	return 0;
 }
 arch_initcall(omap_init_devices);

arch/arm/plat-omap/include/mach/board-2430sdp.h

@@ -30,10 +30,12 @@
 #define __ASM_ARCH_OMAP_2430SDP_H
 
 /* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START		 0x08000300
+#define OMAP24XX_ETHR_START		0x08000300
 #define OMAP24XX_ETHR_GPIO_IRQ		149
 #define SDP2430_CS0_BASE		0x04000000
 
-#define TWL4030_IRQNUM			INT_24XX_SYS_NIRQ
+/* Function prototypes */
+extern void sdp2430_flash_init(void);
+extern void sdp2430_usb_init(void);
 
 #endif /* __ASM_ARCH_OMAP_2430SDP_H */

arch/arm/plat-omap/include/mach/board-apollon.h

@@ -31,6 +31,12 @@
 
 extern void apollon_mmc_init(void);
 
+static inline int apollon_plus(void)
+{
+	/* The apollon plus has IDCODE revision 5 */
+	return system_rev & 0xc0;
+}
+
 /* Placeholder for APOLLON specific defines */
 #define APOLLON_ETHR_GPIO_IRQ		74
 

arch/arm/plat-omap/include/mach/board-h4.h

 /*
  * arch/arm/plat-omap/include/mach/board-h4.h
  *
- * Hardware definitions for TI OMAP1610 H4 board.
+ * Hardware definitions for TI OMAP2420 H4 board.
  *
  * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
  *
@@ -29,6 +29,9 @@
 #ifndef __ASM_ARCH_OMAP_H4_H
 #define __ASM_ARCH_OMAP_H4_H
 
+/* MMC Prototypes */
+extern void h4_mmc_init(void);
+
 /* Placeholder for H4 specific defines */
 #define OMAP24XX_ETHR_GPIO_IRQ		92
 #endif /*  __ASM_ARCH_OMAP_H4_H */

arch/arm/plat-omap/include/mach/board.h

@@ -45,6 +45,8 @@ struct omap_mmc_conf {
 	unsigned cover:1;
 	/* 4 wire signaling is optional, and is only used for SD/SDIO */
 	unsigned wire4:1;
+	/* use the internal clock */
+	unsigned internal_clock:1;
 	s16 power_pin;
 	s16 switch_pin;
 	s16 wp_pin;

arch/arm/plat-omap/include/mach/common.h

@@ -34,6 +34,7 @@ struct sys_timer;
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 extern void omap_serial_init(void);
+extern void omap_serial_enable_clocks(int enable);
 #ifdef CONFIG_I2C_OMAP
 extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
 				 struct i2c_board_info const *info,
@@ -49,6 +50,7 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
 
 /* IO bases for various OMAP processors */
 struct omap_globals {
+	u32		class;		/* OMAP class to detect */
 	void __iomem	*tap;		/* Control module ID code */
 	void __iomem	*sdrc;		/* SDRAM Controller */
 	void __iomem	*sms;		/* SDRAM Memory Scheduler */
@@ -62,6 +64,7 @@ void omap2_set_globals_243x(void);
 void omap2_set_globals_343x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_tap(struct omap_globals *);
 void omap2_set_globals_memory(struct omap_globals *);
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);

arch/arm/plat-omap/include/mach/control.h

-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
 /*
  * arch/arm/plat-omap/include/mach/control.h
  *
  * OMAP2/3 System Control Module definitions
  *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -16,14 +13,23 @@
  * the Free Software Foundation.
  */
 
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
 #include <mach/io.h>
 
+#ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
 	IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
 #define OMAP243X_CTRL_REGADDR(reg)					\
 	IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)					\
 	IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#else
+#define OMAP242X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#endif /* __ASSEMBLY__ */
 
 /*
  * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
@@ -134,6 +140,7 @@
 #define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
 #define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
 #define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
 
 /*
  * REVISIT: This list of registers is not comprehensive - there are more

arch/arm/plat-omap/include/mach/cpu.h

@@ -346,9 +346,14 @@ IS_OMAP_TYPE(3430, 0x3430)
 		get_sil_revision(system_rev)
 
 /* Various silicon macros defined here */
+#define OMAP242X_CLASS		0x24200000
 #define OMAP2420_REV_ES1_0	0x24200000
 #define OMAP2420_REV_ES2_0	0x24201000
+
+#define OMAP243X_CLASS		0x24300000
 #define OMAP2430_REV_ES1_0	0x24300000
+
+#define OMAP343X_CLASS		0x34300000
 #define OMAP3430_REV_ES1_0	0x34300000
 #define OMAP3430_REV_ES2_0	0x34301000
 #define OMAP3430_REV_ES2_1	0x34302000

arch/arm/plat-omap/include/mach/gpio.h

@@ -76,6 +76,8 @@ extern void omap_free_gpio(int gpio);
 extern void omap_set_gpio_direction(int gpio, int is_input);
 extern void omap_set_gpio_dataout(int gpio, int enable);
 extern int omap_get_gpio_datain(int gpio);
+extern void omap2_gpio_prepare_for_retention(void);
+extern void omap2_gpio_resume_after_retention(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
 

arch/arm/plat-omap/include/mach/gpmc.h

@@ -11,6 +11,9 @@
 #ifndef __OMAP2_GPMC_H
 #define __OMAP2_GPMC_H
 
+/* Maximum Number of Chip Selects */
+#define GPMC_CS_NUM		8
+
 #define GPMC_CS_CONFIG1		0x00
 #define GPMC_CS_CONFIG2		0x04
 #define GPMC_CS_CONFIG3		0x08
@@ -22,6 +25,9 @@
 #define GPMC_CS_NAND_ADDRESS	0x20
 #define GPMC_CS_NAND_DATA	0x24
 
+#define GPMC_CONFIG		0x50
+#define GPMC_STATUS		0x54
+
 #define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
 #define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
 #define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
@@ -81,6 +87,7 @@ struct gpmc_timings {
 };
 
 extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
 extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
 extern unsigned long gpmc_get_fclk_period(void);
 
@@ -92,5 +99,6 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
+extern void gpmc_init(void);
 
 #endif

arch/arm/plat-omap/include/mach/hardware.h

@@ -282,8 +282,8 @@
 
 #include "omap730.h"
 #include "omap1510.h"
-#include "omap24xx.h"
 #include "omap16xx.h"
+#include "omap24xx.h"
 #include "omap34xx.h"
 
 #ifndef __ASSEMBLER__

arch/arm/plat-omap/include/mach/irqs.h

@@ -125,6 +125,7 @@
 #define INT_UART2		(15 + IH2_BASE)
 #define INT_BT_MCSI1TX		(16 + IH2_BASE)
 #define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_SOSSI_MATCH		(19 + IH2_BASE)
 #define INT_USB_W2FC		(20 + IH2_BASE)
 #define INT_1WIRE		(21 + IH2_BASE)
 #define INT_OS_TIMER		(22 + IH2_BASE)
@@ -176,6 +177,7 @@
 #define INT_1610_DMA_CH14	(61 + IH2_BASE)
 #define INT_1610_DMA_CH15	(62 + IH2_BASE)
 #define INT_1610_NAND		(63 + IH2_BASE)
+#define INT_1610_SHA1MD5	(91 + IH2_BASE)
 
 /*
  * OMAP-730 specific IRQ numbers for interrupt handler 2
@@ -263,12 +265,16 @@
 #define INT_24XX_GPTIMER10	46
 #define INT_24XX_GPTIMER11	47
 #define INT_24XX_GPTIMER12	48
+#define INT_24XX_SHA1MD5	51
 #define INT_24XX_I2C1_IRQ	56
 #define INT_24XX_I2C2_IRQ	57
+#define INT_24XX_HDQ_IRQ	58
 #define INT_24XX_MCBSP1_IRQ_TX	59
 #define INT_24XX_MCBSP1_IRQ_RX	60
 #define INT_24XX_MCBSP2_IRQ_TX	62
 #define INT_24XX_MCBSP2_IRQ_RX	63
+#define INT_24XX_SPI1_IRQ	65
+#define INT_24XX_SPI2_IRQ	66
 #define INT_24XX_UART1_IRQ	72
 #define INT_24XX_UART2_IRQ	73
 #define INT_24XX_UART3_IRQ	74

arch/arm/plat-omap/include/mach/mux.h

@@ -125,20 +125,64 @@
 	.pu_pd_val	= pull_mode,				\
 },
 
-
-#define PULL_DISABLED	0
-#define PULL_ENABLED	1
-
-#define PULL_DOWN	0
-#define PULL_UP		1
+/* 24xx/34xx mux bit defines */
+#define OMAP2_PULL_ENA		(1 << 3)
+#define OMAP2_PULL_UP		(1 << 4)
+#define OMAP2_ALTELECTRICALSEL	(1 << 5)
+
+/* 34xx specific mux bit defines */
+#define OMAP3_INPUT_EN		(1 << 8)
+#define OMAP3_OFF_EN		(1 << 9)
+#define OMAP3_OFFOUT_EN		(1 << 10)
+#define OMAP3_OFFOUT_VAL	(1 << 11)
+#define OMAP3_OFF_PULL_EN	(1 << 12)
+#define OMAP3_OFF_PULL_UP	(1 << 13)
+#define OMAP3_WAKEUP_EN		(1 << 14)
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define	OMAP34XX_MUX_MODE0	0
+#define	OMAP34XX_MUX_MODE1	1
+#define	OMAP34XX_MUX_MODE2	2
+#define	OMAP34XX_MUX_MODE3	3
+#define	OMAP34XX_MUX_MODE4	4
+#define	OMAP34XX_MUX_MODE5	5
+#define	OMAP34XX_MUX_MODE6	6
+#define	OMAP34XX_MUX_MODE7	7
+
+/* 34xx active pin states */
+#define OMAP34XX_PIN_OUTPUT		0
+#define OMAP34XX_PIN_INPUT		OMAP3_INPUT_EN
+#define OMAP34XX_PIN_INPUT_PULLUP	(OMAP2_PULL_ENA | OMAP3_INPUT_EN \
+						| OMAP2_PULL_UP)
+#define OMAP34XX_PIN_INPUT_PULLDOWN	(OMAP2_PULL_ENA | OMAP3_INPUT_EN)
+
+/* 34xx off mode states */
+#define OMAP34XX_PIN_OFF_NONE           0
+#define OMAP34XX_PIN_OFF_OUTPUT_HIGH	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
+						| OMAP3_OFFOUT_VAL)
+#define OMAP34XX_PIN_OFF_OUTPUT_LOW	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
+#define OMAP34XX_PIN_OFF_INPUT_PULLUP	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
+						| OMAP3_OFF_PULL_UP)
+#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
+#define OMAP34XX_PIN_OFF_WAKEUPENABLE	OMAP3_WAKEUP_EN
+
+#define MUX_CFG_34XX(desc, reg_offset, mux_value) {		\
+	.name		= desc,					\
+	.debug		= 0,					\
+	.mux_reg	= reg_offset,				\
+	.mux_val	= mux_value				\
+},
 
 struct pin_config {
-	char *name;
-	unsigned char busy;
-	unsigned char debug;
+	char 			*name;
+	const unsigned int 	mux_reg;
+	unsigned char		debug;
 
-	const char *mux_reg_name;
-	const unsigned int mux_reg;
+#if	defined(CONFIG_ARCH_OMAP34XX)
+	u16			mux_val; /* Wake-up, off mode, pull, mux mode */
+#endif
+
+#if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
 	const unsigned char mask_offset;
 	const unsigned char mask;
 
@@ -150,6 +194,12 @@ struct pin_config {
 	const char *pu_pd_name;
 	const unsigned int pu_pd_reg;
 	const unsigned char pu_pd_val;
+#endif
+
+#if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+	const char *mux_reg_name;
+#endif
+
 };
 
 enum omap730_index {
@@ -593,6 +643,90 @@ enum omap24xx_index {
 
 };
 
+enum omap34xx_index {
+	/* 34xx I2C */
+	K21_34XX_I2C1_SCL,
+	J21_34XX_I2C1_SDA,
+	AF15_34XX_I2C2_SCL,
+	AE15_34XX_I2C2_SDA,
+	AF14_34XX_I2C3_SCL,
+	AG14_34XX_I2C3_SDA,
+	AD26_34XX_I2C4_SCL,
+	AE26_34XX_I2C4_SDA,
+
+	/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
+	Y8_3430_USB1HS_PHY_CLK,
+	Y9_3430_USB1HS_PHY_STP,
+	AA14_3430_USB1HS_PHY_DIR,
+	AA11_3430_USB1HS_PHY_NXT,
+	W13_3430_USB1HS_PHY_DATA0,
+	W12_3430_USB1HS_PHY_DATA1,
+	W11_3430_USB1HS_PHY_DATA2,
+	Y11_3430_USB1HS_PHY_DATA3,
+	W9_3430_USB1HS_PHY_DATA4,
+	Y12_3430_USB1HS_PHY_DATA5,
+	W8_3430_USB1HS_PHY_DATA6,
+	Y13_3430_USB1HS_PHY_DATA7,
+
+	/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
+	AA8_3430_USB2HS_PHY_CLK,
+	AA10_3430_USB2HS_PHY_STP,
+	AA9_3430_USB2HS_PHY_DIR,
+	AB11_3430_USB2HS_PHY_NXT,
+	AB10_3430_USB2HS_PHY_DATA0,
+	AB9_3430_USB2HS_PHY_DATA1,
+	W3_3430_USB2HS_PHY_DATA2,
+	T4_3430_USB2HS_PHY_DATA3,
+	T3_3430_USB2HS_PHY_DATA4,
+	R3_3430_USB2HS_PHY_DATA5,
+	R4_3430_USB2HS_PHY_DATA6,
+	T2_3430_USB2HS_PHY_DATA7,
+
+
+	/* TLL - HSUSB: 12-pin TLL Port 1*/
+	Y8_3430_USB1HS_TLL_CLK,
+	Y9_3430_USB1HS_TLL_STP,
+	AA14_3430_USB1HS_TLL_DIR,
+	AA11_3430_USB1HS_TLL_NXT,
+	W13_3430_USB1HS_TLL_DATA0,
+	W12_3430_USB1HS_TLL_DATA1,
+	W11_3430_USB1HS_TLL_DATA2,
+	Y11_3430_USB1HS_TLL_DATA3,
+	W9_3430_USB1HS_TLL_DATA4,
+	Y12_3430_USB1HS_TLL_DATA5,
+	W8_3430_USB1HS_TLL_DATA6,
+	Y13_3430_USB1HS_TLL_DATA7,
+
+	/* TLL - HSUSB: 12-pin TLL Port 2*/
+	AA8_3430_USB2HS_TLL_CLK,
+	AA10_3430_USB2HS_TLL_STP,
+	AA9_3430_USB2HS_TLL_DIR,
+	AB11_3430_USB2HS_TLL_NXT,
+	AB10_3430_USB2HS_TLL_DATA0,
+	AB9_3430_USB2HS_TLL_DATA1,
+	W3_3430_USB2HS_TLL_DATA2,
+	T4_3430_USB2HS_TLL_DATA3,
+	T3_3430_USB2HS_TLL_DATA4,
+	R3_3430_USB2HS_TLL_DATA5,
+	R4_3430_USB2HS_TLL_DATA6,
+	T2_3430_USB2HS_TLL_DATA7,
+
+	/* TLL - HSUSB: 12-pin TLL Port 3*/
+	AA6_3430_USB3HS_TLL_CLK,
+	AB3_3430_USB3HS_TLL_STP,
+	AA3_3430_USB3HS_TLL_DIR,
+	Y3_3430_USB3HS_TLL_NXT,
+	AA5_3430_USB3HS_TLL_DATA0,
+	Y4_3430_USB3HS_TLL_DATA1,
+	Y5_3430_USB3HS_TLL_DATA2,
+	W5_3430_USB3HS_TLL_DATA3,
+	AB12_3430_USB3HS_TLL_DATA4,
+	AB13_3430_USB3HS_TLL_DATA5,
+	AA13_3430_USB3HS_TLL_DATA6,
+	AA12_3430_USB3HS_TLL_DATA7
+
+};
+
 struct omap_mux_cfg {
 	struct pin_config	*pins;
 	unsigned long		size;

arch/arm/plat-omap/include/mach/omap1510.h

@@ -44,5 +44,7 @@
 #define OMAP1510_DSPREG_SIZE	SZ_128K
 #define OMAP1510_DSPREG_START	0xE1000000
 
+#define OMAP1510_DSP_MMU_BASE	(0xfffed200)
+
 #endif /*  __ASM_ARCH_OMAP15XX_H */
 

arch/arm/plat-omap/include/mach/omap16xx.h

@@ -44,6 +44,11 @@
 #define OMAP16XX_DSPREG_SIZE	SZ_128K
 #define OMAP16XX_DSPREG_START	0xE1000000
 
+#define OMAP16XX_SEC_BASE	0xFFFE4000
+#define OMAP16XX_SEC_DES	(OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5	(OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG	(OMAP16XX_SEC_BASE + 0x1000)
+
 /*
  * ---------------------------------------------------------------------------
  * Interrupts
@@ -190,7 +195,7 @@
 #define WSPR_DISABLE_0         (0x0000aaaa)
 #define WSPR_DISABLE_1         (0x00005555)
 
-/* Mailbox */
+#define OMAP16XX_DSP_MMU_BASE	(0xfffed200)
 #define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
 
 #endif /*  __ASM_ARCH_OMAP16XX_H */

arch/arm/plat-omap/include/mach/omap24xx.h

@@ -48,6 +48,7 @@
 #define OMAP2420_PRM_BASE	OMAP2420_CM_BASE
 #define OMAP2420_SDRC_BASE	(L3_24XX_BASE + 0x9000)
 #define OMAP2420_SMS_BASE	0x68008000
+#define OMAP2420_GPMC_BASE	0x6800a000
 
 #define OMAP2430_32KSYNCT_BASE	(L4_WK_243X_BASE + 0x20000)
 #define OMAP2430_PRCM_BASE	(L4_WK_243X_BASE + 0x6000)

arch/arm/plat-omap/include/mach/omapfb.h

@@ -62,6 +62,7 @@
 #define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
 #define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
 #define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
 #define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
 
 /* Values from DSP must map to lower 16-bits */
@@ -305,6 +306,7 @@ struct lcd_ctrl {
 					   int screen_width,
 					   int pos_x, int pos_y, int width,
 					   int height, int color_mode);
+	int		(*set_rotate)	  (int angle);
 	int		(*setup_mem)	  (int plane, size_t size,
 					   int mem_type, unsigned long *paddr);
 	int		(*mmap)		  (struct fb_info *info,
@@ -374,6 +376,7 @@ extern struct lcd_ctrl omap1_lcd_ctrl;
 extern struct lcd_ctrl omap2_disp_ctrl;
 #endif
 
+extern void omapfb_reserve_sdram(void);
 extern void omapfb_register_panel(struct lcd_panel *panel);
 extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
 extern void omapfb_notify_clients(struct omapfb_device *fbdev,

arch/arm/plat-omap/include/mach/pm.h

@@ -135,7 +135,8 @@ extern void omap_pm_suspend(void);
 extern void omap730_cpu_suspend(unsigned short, unsigned short);
 extern void omap1510_cpu_suspend(unsigned short, unsigned short);
 extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+					void __iomem *sdrc_power);
 extern void omap730_idle_loop_suspend(void);
 extern void omap1510_idle_loop_suspend(void);
 extern void omap1610_idle_loop_suspend(void);

arch/arm/plat-omap/include/mach/sdrc.h

@@ -25,6 +25,8 @@
 #define SDRC_DLLB_STATUS	0x06C
 #define SDRC_POWER		0x070
 #define SDRC_MR_0		0x084
+#define SDRC_ACTIM_CTRL_A	0x09c
+#define SDRC_ACTIM_CTRL_B	0x0a0
 #define SDRC_RFR_CTRL_0		0x0a4
 
 /*

arch/arm/plat-omap/include/mach/serial.h

@@ -20,11 +20,17 @@
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x4806e000
+#elif defined(CONFIG_ARCH_OMAP3)
+/* OMAP3 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x49020000
 #endif
 
 #define OMAP_MAX_NR_PORTS	3
 #define OMAP1510_BASE_BAUD	(12000000/16)
 #define OMAP16XX_BASE_BAUD	(48000000/16)
+#define OMAP24XX_BASE_BAUD	(48000000/16)
 
 #define is_omap_port(pt)	({int __ret = 0;			\
 			if ((pt)->port.mapbase == OMAP_UART1_BASE ||	\