net: bgmac: use PHY subsystem for initializing PHY

This adds support for using bgmac with PHYs supported by standalone PHY
drivers. Having any PHY initialization in bgmac is hacky and shouldn't
be extended but rather removed if anyone has hardware to test it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bgmac-bcma-mdio.c

@@ -132,6 +132,10 @@ static void bcma_mdio_phy_init(struct bgmac *bgmac)
 	struct bcma_chipinfo *ci = &bgmac->bcma.core->bus->chipinfo;
 	u8 i;
 
+	/* For some legacy hardware we do chipset-based PHY initialization here
+	 * without even detecting PHY ID. It's hacky and should be cleaned as
+	 * soon as someone can test it.
+	 */
 	if (ci->id == BCMA_CHIP_ID_BCM5356) {
 		for (i = 0; i < 5; i++) {
 			bcma_mdio_phy_write(bgmac, i, 0x1f, 0x008b);
@@ -140,6 +144,7 @@ static void bcma_mdio_phy_init(struct bgmac *bgmac)
 			bcma_mdio_phy_write(bgmac, i, 0x12, 0x2aaa);
 			bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000b);
 		}
+		return;
 	}
 	if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) ||
 	    (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) ||
@@ -161,7 +166,12 @@ static void bcma_mdio_phy_init(struct bgmac *bgmac)
 			bcma_mdio_phy_write(bgmac, i, 0x17, 0x9273);
 			bcma_mdio_phy_write(bgmac, i, 0x1f, 0x000b);
 		}
+		return;
 	}
+
+	/* For all other hw do initialization using PHY subsystem. */
+	if (bgmac->net_dev && bgmac->net_dev->phydev)
+		phy_init_hw(bgmac->net_dev->phydev);
 }
 
 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */