Commit 8ef82614 authored by Thierry Reding's avatar Thierry Reding

drm/msm: edp: Avoid drm_dp_link helpers

During the discussion of patches that enhance the drm_dp_link helpers it
was concluded that these helpers aren't very useful to begin with. Start
pushing the equivalent code into individual drivers to ultimately remove
them.
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
Reviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021143437.1477719-12-thierry.reding@gmail.com
parent 98bca69b
......@@ -89,7 +89,6 @@ struct edp_ctrl {
/* edid raw data */
struct edid *edid;
struct drm_dp_link dp_link;
struct drm_dp_aux *drm_aux;
/* dpcd raw data */
......@@ -403,7 +402,7 @@ static void edp_fill_link_cfg(struct edp_ctrl *ctrl)
u32 prate;
u32 lrate;
u32 bpp;
u8 max_lane = ctrl->dp_link.num_lanes;
u8 max_lane = drm_dp_max_lane_count(ctrl->dpcd);
u8 lane;
prate = ctrl->pixel_rate;
......@@ -413,7 +412,7 @@ static void edp_fill_link_cfg(struct edp_ctrl *ctrl)
* By default, use the maximum link rate and minimum lane count,
* so that we can do rate down shift during link training.
*/
ctrl->link_rate = drm_dp_link_rate_to_bw_code(ctrl->dp_link.rate);
ctrl->link_rate = ctrl->dpcd[DP_MAX_LINK_RATE];
prate *= bpp;
prate /= 8; /* in kByte */
......@@ -439,7 +438,7 @@ static void edp_config_ctrl(struct edp_ctrl *ctrl)
data = EDP_CONFIGURATION_CTRL_LANES(ctrl->lane_cnt - 1);
if (ctrl->dp_link.capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
if (drm_dp_enhanced_frame_cap(ctrl->dpcd))
data |= EDP_CONFIGURATION_CTRL_ENHANCED_FRAMING;
depth = EDP_6BIT;
......@@ -701,7 +700,7 @@ static int edp_link_rate_down_shift(struct edp_ctrl *ctrl)
rate = ctrl->link_rate;
lane = ctrl->lane_cnt;
max_lane = ctrl->dp_link.num_lanes;
max_lane = drm_dp_max_lane_count(ctrl->dpcd);
bpp = ctrl->color_depth * 3;
prate = ctrl->pixel_rate;
......@@ -751,18 +750,22 @@ static int edp_clear_training_pattern(struct edp_ctrl *ctrl)
static int edp_do_link_train(struct edp_ctrl *ctrl)
{
u8 values[2];
int ret;
struct drm_dp_link dp_link;
DBG("");
/*
* Set the current link rate and lane cnt to panel. They may have been
* adjusted and the values are different from them in DPCD CAP
*/
dp_link.num_lanes = ctrl->lane_cnt;
dp_link.rate = drm_dp_bw_code_to_link_rate(ctrl->link_rate);
dp_link.capabilities = ctrl->dp_link.capabilities;
if (drm_dp_link_configure(ctrl->drm_aux, &dp_link) < 0)
values[0] = ctrl->lane_cnt;
values[1] = ctrl->link_rate;
if (drm_dp_enhanced_frame_cap(ctrl->dpcd))
values[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
if (drm_dp_dpcd_write(ctrl->drm_aux, DP_LINK_BW_SET, values,
sizeof(values)) < 0)
return EDP_TRAIN_FAIL;
ctrl->v_level = 0; /* start from default level */
......@@ -952,6 +955,7 @@ static void edp_ctrl_on_worker(struct work_struct *work)
{
struct edp_ctrl *ctrl = container_of(
work, struct edp_ctrl, on_work);
u8 value;
int ret;
mutex_lock(&ctrl->dev_mutex);
......@@ -965,9 +969,27 @@ static void edp_ctrl_on_worker(struct work_struct *work)
edp_ctrl_link_enable(ctrl, 1);
edp_ctrl_irq_enable(ctrl, 1);
ret = drm_dp_link_power_up(ctrl->drm_aux, &ctrl->dp_link);
if (ret)
goto fail;
/* DP_SET_POWER register is only available on DPCD v1.1 and later */
if (ctrl->dpcd[DP_DPCD_REV] >= 0x11) {
ret = drm_dp_dpcd_readb(ctrl->drm_aux, DP_SET_POWER, &value);
if (ret < 0)
goto fail;
value &= ~DP_SET_POWER_MASK;
value |= DP_SET_POWER_D0;
ret = drm_dp_dpcd_writeb(ctrl->drm_aux, DP_SET_POWER, value);
if (ret < 0)
goto fail;
/*
* According to the DP 1.1 specification, a "Sink Device must
* exit the power saving state within 1 ms" (Section 2.5.3.1,
* Table 5-52, "Sink Control Field" (register 0x600).
*/
usleep_range(1000, 2000);
}
ctrl->power_on = true;
......@@ -1011,7 +1033,19 @@ static void edp_ctrl_off_worker(struct work_struct *work)
edp_state_ctrl(ctrl, 0);
drm_dp_link_power_down(ctrl->drm_aux, &ctrl->dp_link);
/* DP_SET_POWER register is only available on DPCD v1.1 and later */
if (ctrl->dpcd[DP_DPCD_REV] >= 0x11) {
u8 value;
int ret;
ret = drm_dp_dpcd_readb(ctrl->drm_aux, DP_SET_POWER, &value);
if (ret > 0) {
value &= ~DP_SET_POWER_MASK;
value |= DP_SET_POWER_D3;
drm_dp_dpcd_writeb(ctrl->drm_aux, DP_SET_POWER, value);
}
}
edp_ctrl_irq_enable(ctrl, 0);
......@@ -1225,14 +1259,8 @@ int msm_edp_ctrl_get_panel_info(struct edp_ctrl *ctrl,
edp_ctrl_irq_enable(ctrl, 1);
}
ret = drm_dp_link_probe(ctrl->drm_aux, &ctrl->dp_link);
if (ret) {
pr_err("%s: read dpcd cap failed, %d\n", __func__, ret);
goto disable_ret;
}
/* Initialize link rate as panel max link rate */
ctrl->link_rate = drm_dp_link_rate_to_bw_code(ctrl->dp_link.rate);
ctrl->link_rate = ctrl->dpcd[DP_MAX_LINK_RATE];
ctrl->edid = drm_get_edid(connector, &ctrl->drm_aux->ddc);
if (!ctrl->edid) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment