Commit 8f969a52 authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz Committed by Linus Torvalds

[PATCH] ide: kill some useless headers for PCI drivers

They are only included from these drivers.

While at it:
- remove redundant ide_pci_device_t tables
- add DECLARE_CS_DEV() (cs5520)
- remove duplicate DISPLAY_SC1200_TIMINGS define (sc1200)
- remove unused SIIMAGE_BUFFERED_TASKFILE, SII_DEBUG
  and siiprintk() defines + add DECLARE_SII_DEV() (siimage)
- remove unused SLC90E66_DEBUG_DRIVE_INFO define (slc90e66)
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent cdbe7268
......@@ -38,7 +38,7 @@
#include <asm/io.h>
#include "alim15x3.h"
#define DISPLAY_ALI_TIMINGS
/*
* ALi devices are not plug in. Otherwise these static values would
......@@ -853,6 +853,16 @@ static void __init init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase)
ide_setup_dma(hwif, dmabase, 8);
}
static ide_pci_device_t ali15x3_chipset __devinitdata = {
.name = "ALI15X3",
.init_chipset = init_chipset_ali15x3,
.init_hwif = init_hwif_ali15x3,
.init_dma = init_dma_ali15x3,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
};
/**
* alim15x3_init_one - set up an ALi15x3 IDE controller
* @dev: PCI device to set up
......@@ -863,8 +873,8 @@ static void __init init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase)
static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
ide_pci_device_t *d = &ali15x3_chipsets[id->driver_data];
ide_pci_device_t *d = &ali15x3_chipset;
if(pci_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, NULL))
printk(KERN_ERR "Warning: ATI Radeon IGP Northbridge is not yet fully tested.\n");
......
#ifndef ALI15X3_H
#define ALI15X3_H
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/ide.h>
#define DISPLAY_ALI_TIMINGS
static unsigned int init_chipset_ali15x3(struct pci_dev *, const char *);
static void init_hwif_common_ali15x3(ide_hwif_t *);
static void init_hwif_ali15x3(ide_hwif_t *);
static void init_dma_ali15x3(ide_hwif_t *, unsigned long);
static ide_pci_device_t ali15x3_chipsets[] __devinitdata = {
{ /* 0 */
.name = "ALI15X3",
.init_chipset = init_chipset_ali15x3,
.init_hwif = init_hwif_ali15x3,
.init_dma = init_dma_ali15x3,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
}
};
#endif /* ALI15X3 */
......@@ -51,7 +51,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#include "cs5520.h"
#define DISPLAY_CS5520_TIMINGS
#if defined(DISPLAY_CS5520_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
......@@ -251,7 +251,24 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
hwif->drives[0].autodma = hwif->autodma;
hwif->drives[1].autodma = hwif->autodma;
}
#define DECLARE_CS_DEV(name_str) \
{ \
.name = name_str, \
.init_chipset = init_chipset_cs5520, \
.init_setup_dma = cs5520_init_setup_dma, \
.init_hwif = init_hwif_cs5520, \
.channels = 2, \
.autodma = AUTODMA, \
.bootable = ON_BOARD, \
.flags = IDEPCI_FLAG_ISA_PORTS, \
}
static ide_pci_device_t cyrix_chipsets[] __devinitdata = {
/* 0 */ DECLARE_CS_DEV("Cyrix 5510"),
/* 1 */ DECLARE_CS_DEV("Cyrix 5520")
};
/*
* The 5510/5520 are a bit weird. They don't quite set up the way
* the PCI helper layer expects so we must do much of the set up
......
#ifndef CS5520_H
#define CS5520_H
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/ide.h>
#define DISPLAY_CS5520_TIMINGS
static unsigned int init_chipset_cs5520(struct pci_dev *, const char *);
static void init_hwif_cs5520(ide_hwif_t *);
static void cs5520_init_setup_dma(struct pci_dev *dev, struct ide_pci_device_s *d, ide_hwif_t *hwif);
static ide_pci_device_t cyrix_chipsets[] __devinitdata = {
{
.name = "Cyrix 5510",
.init_chipset = init_chipset_cs5520,
.init_setup_dma = cs5520_init_setup_dma,
.init_hwif = init_hwif_cs5520,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
.flags = IDEPCI_FLAG_ISA_PORTS,
},
{
.name = "Cyrix 5520",
.init_chipset = init_chipset_cs5520,
.init_setup_dma = cs5520_init_setup_dma,
.init_hwif = init_hwif_cs5520,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
.flags = IDEPCI_FLAG_ISA_PORTS,
}
};
#endif /* CS5520_H */
......@@ -31,7 +31,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#include "cs5530.h"
#define DISPLAY_CS5530_TIMINGS
#if defined(DISPLAY_CS5530_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
......@@ -404,9 +404,19 @@ static void __init init_hwif_cs5530 (ide_hwif_t *hwif)
hwif->drives[1].autodma = hwif->autodma;
}
static ide_pci_device_t cs5530_chipset __devinitdata = {
.name = "CS5530",
.init_chipset = init_chipset_cs5530,
.init_hwif = init_hwif_cs5530,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
.flags = IDEPCI_FLAG_FORCE_MASTER,
};
static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
ide_setup_pci_device(dev, &cs5530_chipsets[id->driver_data]);
ide_setup_pci_device(dev, &cs5530_chipset);
return 0;
}
......
#ifndef CS5530_H
#define CS5530_H
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/ide.h>
#define DISPLAY_CS5530_TIMINGS
static unsigned int init_chipset_cs5530(struct pci_dev *, const char *);
static void init_hwif_cs5530(ide_hwif_t *);
static ide_pci_device_t cs5530_chipsets[] __devinitdata = {
{ /* 0 */
.name = "CS5530",
.init_chipset = init_chipset_cs5530,
.init_hwif = init_hwif_cs5530,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
.flags = IDEPCI_FLAG_FORCE_MASTER,
}
};
#endif /* CS5530_H */
......@@ -25,8 +25,6 @@
#include <asm/io.h>
#include "ns87415.h"
static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
/*
......@@ -217,9 +215,17 @@ static void __init init_hwif_ns87415 (ide_hwif_t *hwif)
hwif->drives[1].autodma = hwif->autodma;
}
static ide_pci_device_t ns87415_chipset __devinitdata = {
.name = "NS87415",
.init_hwif = init_hwif_ns87415,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
};
static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
ide_setup_pci_device(dev, &ns87415_chipsets[id->driver_data]);
ide_setup_pci_device(dev, &ns87415_chipset);
return 0;
}
......
#ifndef NS87415_H
#define NS87415_H
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/ide.h>
static void init_hwif_ns87415(ide_hwif_t *);
static ide_pci_device_t ns87415_chipsets[] __devinitdata = {
{ /* 0 */
.name = "NS87415",
.init_hwif = init_hwif_ns87415,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
}
};
#endif /* NS87415_H */
......@@ -33,8 +33,6 @@
#include <asm/io.h>
#include "rz1000.h"
static void __init init_hwif_rz1000 (ide_hwif_t *hwif)
{
u16 reg;
......@@ -54,15 +52,23 @@ static void __init init_hwif_rz1000 (ide_hwif_t *hwif)
}
}
static ide_pci_device_t rz1000_chipset __devinitdata = {
.name = "RZ100x",
.init_hwif = init_hwif_rz1000,
.channels = 2,
.autodma = NODMA,
.bootable = ON_BOARD,
};
static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
ide_setup_pci_device(dev, &rz1000_chipsets[id->driver_data]);
ide_setup_pci_device(dev, &rz1000_chipset);
return 0;
}
static struct pci_device_id rz1000_pci_tbl[] = {
{ PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
{ PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl);
......
#ifndef RZ100X_H
#define RZ100X_H
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/ide.h>
static void init_hwif_rz1000(ide_hwif_t *);
static ide_pci_device_t rz1000_chipsets[] __devinitdata = {
{
.name = "RZ1000",
.init_hwif = init_hwif_rz1000,
.channels = 2,
.autodma = NODMA,
.bootable = ON_BOARD,
},{
.name = "RZ1001",
.init_hwif = init_hwif_rz1000,
.channels = 2,
.autodma = NODMA,
.bootable = ON_BOARD,
}
};
#endif /* RZ100X_H */
......@@ -29,8 +29,6 @@
#include <asm/io.h>
#include <asm/irq.h>
#include "sc1200.h"
#define SC1200_REV_A 0x00
#define SC1200_REV_B1 0x01
#define SC1200_REV_B3 0x02
......@@ -545,9 +543,18 @@ static void __init init_hwif_sc1200 (ide_hwif_t *hwif)
hwif->drives[1].autodma = hwif->autodma;
}
static ide_pci_device_t sc1200_chipset __devinitdata = {
.name = "SC1200",
.init_chipset = init_chipset_sc1200,
.init_hwif = init_hwif_sc1200,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
};
static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
ide_setup_pci_device(dev, &sc1200_chipsets[id->driver_data]);
ide_setup_pci_device(dev, &sc1200_chipset);
return 0;
}
......
#ifndef SC1200_H
#define SC1200_H
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/ide.h>
#define DISPLAY_SC1200_TIMINGS
static unsigned int init_chipset_sc1200(struct pci_dev *, const char *);
static void init_hwif_sc1200(ide_hwif_t *);
static ide_pci_device_t sc1200_chipsets[] __devinitdata = {
{ /* 0 */
.name = "SC1200",
.init_chipset = init_chipset_sc1200,
.init_hwif = init_hwif_sc1200,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
}
};
#endif /* SC1200_H */
......@@ -31,7 +31,8 @@
#include <asm/io.h>
#include "siimage.h"
#undef SIIMAGE_VIRTUAL_DMAPIO
#undef SIIMAGE_LARGE_DMA
/**
* pdev_is_sata - check if device is SATA
......@@ -1092,6 +1093,23 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
hwif->drives[1].autodma = hwif->autodma;
}
#define DECLARE_SII_DEV(name_str) \
{ \
.name = name_str, \
.init_chipset = init_chipset_siimage, \
.init_iops = init_iops_siimage, \
.init_hwif = init_hwif_siimage, \
.channels = 2, \
.autodma = AUTODMA, \
.bootable = ON_BOARD, \
}
static ide_pci_device_t siimage_chipsets[] __devinitdata = {
/* 0 */ DECLARE_SII_DEV("SiI680"),
/* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA"),
/* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA")
};
/**
* siimage_init_one - pci layer discovery entry
* @dev: PCI device
......
#ifndef SIIMAGE_H
#define SIIMAGE_H
#include <linux/pci.h>
#include <linux/ide.h>
#include <asm/io.h>
#undef SIIMAGE_VIRTUAL_DMAPIO
#undef SIIMAGE_BUFFERED_TASKFILE
#undef SIIMAGE_LARGE_DMA
#define SII_DEBUG 0
#if SII_DEBUG
#define siiprintk(x...) printk(x)
#else
#define siiprintk(x...)
#endif
static unsigned int init_chipset_siimage(struct pci_dev *, const char *);
static void init_iops_siimage(ide_hwif_t *);
static void init_hwif_siimage(ide_hwif_t *);
static ide_pci_device_t siimage_chipsets[] __devinitdata = {
{ /* 0 */
.name = "SiI680",
.init_chipset = init_chipset_siimage,
.init_iops = init_iops_siimage,
.init_hwif = init_hwif_siimage,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
},{ /* 1 */
.name = "SiI3112 Serial ATA",
.init_chipset = init_chipset_siimage,
.init_iops = init_iops_siimage,
.init_hwif = init_hwif_siimage,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
},{ /* 2 */
.name = "Adaptec AAR-1210SA",
.init_chipset = init_chipset_siimage,
.init_iops = init_iops_siimage,
.init_hwif = init_hwif_siimage,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
}
};
#endif /* SIIMAGE_H */
......@@ -63,7 +63,8 @@
#include <asm/irq.h>
#include "ide-timing.h"
#include "sis5513.h"
#define DISPLAY_SIS_TIMINGS
/* registers layout and init values are chipset family dependant */
......@@ -944,9 +945,19 @@ static void __init init_hwif_sis5513 (ide_hwif_t *hwif)
return;
}
static ide_pci_device_t sis5513_chipset __devinitdata = {
.name = "SIS5513",
.init_chipset = init_chipset_sis5513,
.init_hwif = init_hwif_sis5513,
.channels = 2,
.autodma = NOAUTODMA,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.bootable = ON_BOARD,
};
static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
ide_setup_pci_device(dev, &sis5513_chipsets[id->driver_data]);
ide_setup_pci_device(dev, &sis5513_chipset);
return 0;
}
......
#ifndef SIS5513_H
#define SIS5513_H
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/ide.h>
#define DISPLAY_SIS_TIMINGS
static unsigned int init_chipset_sis5513(struct pci_dev *, const char *);
static void init_hwif_sis5513(ide_hwif_t *);
static ide_pci_device_t sis5513_chipsets[] __devinitdata = {
{ /* 0 */
.name = "SIS5513",
.init_chipset = init_chipset_sis5513,
.init_hwif = init_hwif_sis5513,
.channels = 2,
.autodma = NOAUTODMA,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.bootable = ON_BOARD,
}
};
#endif /* SIS5513_H */
......@@ -29,8 +29,6 @@
#include <asm/io.h>
#include <asm/dma.h>
#include "sl82c105.h"
#undef DEBUG
#ifdef DEBUG
......@@ -481,9 +479,20 @@ static void __init init_hwif_sl82c105(ide_hwif_t *hwif)
#endif /* CONFIG_BLK_DEV_IDEDMA */
}
static ide_pci_device_t sl82c105_chipset __devinitdata = {
.name = "W82C105",
.init_chipset = init_chipset_sl82c105,
.init_hwif = init_hwif_sl82c105,
.init_dma = init_dma_sl82c105,
.channels = 2,
.autodma = NOAUTODMA,
.enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
.bootable = ON_BOARD,
};
static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
ide_setup_pci_device(dev, &sl82c105_chipsets[id->driver_data]);
ide_setup_pci_device(dev, &sl82c105_chipset);
return 0;
}
......
#ifndef W82C105_H
#define W82C105_H
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/ide.h>
static unsigned int init_chipset_sl82c105(struct pci_dev *, const char *);
static void init_hwif_sl82c105(ide_hwif_t *);
static void init_dma_sl82c105(ide_hwif_t *, unsigned long);
static ide_pci_device_t sl82c105_chipsets[] __devinitdata = {
{ /* 0 */
.name = "W82C105",
.init_chipset = init_chipset_sl82c105,
.init_hwif = init_hwif_sl82c105,
.init_dma = init_dma_sl82c105,
.channels = 2,
.autodma = NOAUTODMA,
.enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
.bootable = ON_BOARD,
}
};
#endif /* W82C105_H */
......@@ -21,7 +21,7 @@
#include <asm/io.h>
#include "slc90e66.h"
#define DISPLAY_SLC90E66_TIMINGS
#if defined(DISPLAY_SLC90E66_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
......@@ -364,9 +364,19 @@ static void __init init_hwif_slc90e66 (ide_hwif_t *hwif)
#endif /* !CONFIG_BLK_DEV_IDEDMA */
}
static ide_pci_device_t slc90e66_chipset __devinitdata = {
.name = "SLC90E66",
.init_chipset = init_chipset_slc90e66,
.init_hwif = init_hwif_slc90e66,
.channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
.bootable = ON_BOARD,
};
static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
ide_setup_pci_device(dev, &slc90e66_chipsets[id->driver_data]);
ide_setup_pci_device(dev, &slc90e66_chipset);
return 0;
}
......
#ifndef SLC90E66_H
#define SLC90E66_H
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/ide.h>
#define DISPLAY_SLC90E66_TIMINGS
#define SLC90E66_DEBUG_DRIVE_INFO 0
static unsigned int init_chipset_slc90e66(struct pci_dev *, const char *);
static void init_hwif_slc90e66(ide_hwif_t *);
static ide_pci_device_t slc90e66_chipsets[] __devinitdata = {
{ /* 0 */
.name = "SLC90E66",
.init_chipset = init_chipset_slc90e66,
.init_hwif = init_hwif_slc90e66,
.channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
.bootable = ON_BOARD,
}
};
#endif /* SLC90E66_H */
......@@ -41,8 +41,6 @@
#include <linux/ide.h>
#include <linux/init.h>
#include "triflex.h"
static struct pci_dev *triflex_dev;
#ifdef CONFIG_PROC_FS
......@@ -217,15 +215,32 @@ static unsigned int __init init_chipset_triflex(struct pci_dev *dev,
return 0;
}
static ide_pci_device_t triflex_device __devinitdata = {
.name = "TRIFLEX",
.init_chipset = init_chipset_triflex,
.init_hwif = init_hwif_triflex,
.channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
.bootable = ON_BOARD,
};
static int __devinit triflex_init_one(struct pci_dev *dev,
const struct pci_device_id *id)
{
ide_setup_pci_device(dev, &triflex_devices[id->driver_data]);
ide_setup_pci_device(dev, &triflex_device);
triflex_dev = dev;
return 0;
}
static struct pci_device_id triflex_pci_tbl[] = {
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
static struct pci_driver driver = {
.name = "TRIFLEX IDE",
.id_table = triflex_pci_tbl,
......
/*
* triflex.h
*
* Copyright (C) 2002 Hewlett-Packard Development Group, L.P.
* Author: Torben Mathiasen <torben.mathiasen@hp.com>
*
*/
#ifndef TRIFLEX_H
#define TRIFLEX_H
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/ide.h>
static unsigned int __devinit init_chipset_triflex(struct pci_dev *, const char *);
static void init_hwif_triflex(ide_hwif_t *);
static ide_pci_device_t triflex_devices[] __devinitdata = {
{
.name = "TRIFLEX",
.init_chipset = init_chipset_triflex,
.init_hwif = init_hwif_triflex,
.channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
.bootable = ON_BOARD,
}
};
static struct pci_device_id triflex_pci_tbl[] = {
{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
#endif /* TRIFLEX_H */
......@@ -140,8 +140,6 @@
#include <asm/io.h>
#include "trm290.h"
static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
{
ide_hwif_t *hwif = HWIF(drive);
......@@ -395,9 +393,17 @@ void __devinit init_hwif_trm290(ide_hwif_t *hwif)
#endif
}
static ide_pci_device_t trm290_chipset __devinitdata = {
.name = "TRM290",
.init_hwif = init_hwif_trm290,
.channels = 2,
.autodma = NOAUTODMA,
.bootable = ON_BOARD,
};
static int __devinit trm290_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
ide_setup_pci_device(dev, &trm290_chipsets[id->driver_data]);
ide_setup_pci_device(dev, &trm290_chipset);
return 0;
}
......
#ifndef TRM290_H
#define TRM290_H
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/ide.h>
extern void init_hwif_trm290(ide_hwif_t *);
static ide_pci_device_t trm290_chipsets[] __devinitdata = {
{ /* 0 */
.name = "TRM290",
.init_hwif = init_hwif_trm290,
.channels = 2,
.autodma = NOAUTODMA,
.bootable = ON_BOARD,
}
};
#endif /* TRM290_H */
......@@ -37,7 +37,8 @@
#include <asm/io.h>
#include "ide-timing.h"
#include "via82cxxx.h"
#define DISPLAY_VIA_TIMINGS
#define VIA_IDE_ENABLE 0x40
#define VIA_IDE_CONFIG 0x41
......@@ -607,9 +608,19 @@ static void __init init_hwif_via82cxxx(ide_hwif_t *hwif)
hwif->drives[1].autodma = hwif->autodma;
}
static ide_pci_device_t via82cxxx_chipset __devinitdata = {
.name = "VP_IDE",
.init_chipset = init_chipset_via82cxxx,
.init_hwif = init_hwif_via82cxxx,
.channels = 2,
.autodma = NOAUTODMA,
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
.bootable = ON_BOARD,
};
static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
ide_setup_pci_device(dev, &via82cxxx_chipsets[id->driver_data]);
ide_setup_pci_device(dev, &via82cxxx_chipset);
return 0;
}
......
#ifndef VIA82CXXX_H
#define VIA82CXXX_H
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/ide.h>
#define DISPLAY_VIA_TIMINGS
static unsigned int init_chipset_via82cxxx(struct pci_dev *, const char *);
static void init_hwif_via82cxxx(ide_hwif_t *);
static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = {
{ /* 0 */
.name = "VP_IDE",
.init_chipset = init_chipset_via82cxxx,
.init_hwif = init_hwif_via82cxxx,
.channels = 2,
.autodma = NOAUTODMA,
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
.bootable = ON_BOARD,
}
};
#endif /* VIA82CXXX_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment