Commit 92311272 authored by Nicolas Pitre's avatar Nicolas Pitre Committed by Nicolas Pitre

ARM: s3c24xx: move special idle code to out of line

... and hook it to arm_pm_idle.
Signed-off-by: default avatarNicolas Pitre <nicolas.pitre@linaro.org>
parent 50edbf78
......@@ -10,45 +10,7 @@
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/idle.h>
#include <mach/regs-clock.h>
void (*s3c24xx_idle)(void);
void s3c24xx_default_idle(void)
{
unsigned long tmp;
int i;
/* idle the system by using the idle mode which will wait for an
* interrupt to happen before restarting the system.
*/
/* Warning: going into idle state upsets jtag scanning */
__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
S3C2410_CLKCON);
/* the samsung port seems to do a loop and then unset idle.. */
for (i = 0; i < 50; i++) {
tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
}
/* this bit is not cleared on re-start... */
__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
S3C2410_CLKCON);
}
static void arch_idle(void)
{
if (s3c24xx_idle != NULL)
(s3c24xx_idle)();
else
s3c24xx_default_idle();
cpu_do_idle();
}
......@@ -32,8 +32,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <mach/idle.h>
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
......@@ -164,7 +162,7 @@ void __init s3c2412_map_io(void)
/* set our idle function */
s3c24xx_idle = s3c2412_idle;
arm_pm_idle = s3c2412_idle;
/* register our io-tables */
......
......@@ -44,7 +44,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <mach/idle.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/gpio-core.h>
......@@ -88,8 +87,6 @@ int __init s3c2416_init(void)
{
printk(KERN_INFO "S3C2416: Initializing architecture\n");
/* s3c24xx_idle = s3c2416_idle; */
/* change WDT IRQ number */
s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
......
......@@ -32,6 +32,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/regs-clock.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
......@@ -190,8 +191,34 @@ static unsigned long s3c24xx_read_idcode_v4(void)
return __raw_readl(S3C2410_GSTATUS1);
}
static void s3c24xx_default_idle(void)
{
unsigned long tmp;
int i;
/* idle the system by using the idle mode which will wait for an
* interrupt to happen before restarting the system.
*/
/* Warning: going into idle state upsets jtag scanning */
__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
S3C2410_CLKCON);
/* the samsung port seems to do a loop and then unset idle.. */
for (i = 0; i < 50; i++)
tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
/* this bit is not cleared on re-start... */
__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
S3C2410_CLKCON);
}
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
arm_pm_idle = s3c24xx_default_idle;
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment