Commit 92552fdd authored by Philippe Reynes's avatar Philippe Reynes Committed by David S. Miller

net: sun: sungem: use new api ethtool_{get|set}_link_ksettings

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: default avatarPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d9722531
......@@ -1250,12 +1250,17 @@ static void gem_stop_dma(struct gem *gp)
// XXX dbl check what that function should do when called on PCS PHY
static void gem_begin_auto_negotiation(struct gem *gp, struct ethtool_cmd *ep)
static void gem_begin_auto_negotiation(struct gem *gp,
const struct ethtool_link_ksettings *ep)
{
u32 advertise, features;
int autoneg;
int speed;
int duplex;
u32 advertising;
ethtool_convert_link_mode_to_legacy_u32(&advertising,
ep->link_modes.advertising);
if (gp->phy_type != phy_mii_mdio0 &&
gp->phy_type != phy_mii_mdio1)
......@@ -1278,13 +1283,13 @@ static void gem_begin_auto_negotiation(struct gem *gp, struct ethtool_cmd *ep)
/* Setup link parameters */
if (!ep)
goto start_aneg;
if (ep->autoneg == AUTONEG_ENABLE) {
advertise = ep->advertising;
if (ep->base.autoneg == AUTONEG_ENABLE) {
advertise = advertising;
autoneg = 1;
} else {
autoneg = 0;
speed = ethtool_cmd_speed(ep);
duplex = ep->duplex;
speed = ep->base.speed;
duplex = ep->base.duplex;
}
start_aneg:
......@@ -2515,85 +2520,96 @@ static void gem_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info
strlcpy(info->bus_info, pci_name(gp->pdev), sizeof(info->bus_info));
}
static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
static int gem_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *cmd)
{
struct gem *gp = netdev_priv(dev);
u32 supported, advertising;
if (gp->phy_type == phy_mii_mdio0 ||
gp->phy_type == phy_mii_mdio1) {
if (gp->phy_mii.def)
cmd->supported = gp->phy_mii.def->features;
supported = gp->phy_mii.def->features;
else
cmd->supported = (SUPPORTED_10baseT_Half |
supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full);
/* XXX hardcoded stuff for now */
cmd->port = PORT_MII;
cmd->transceiver = XCVR_EXTERNAL;
cmd->phy_address = 0; /* XXX fixed PHYAD */
cmd->base.port = PORT_MII;
cmd->base.phy_address = 0; /* XXX fixed PHYAD */
/* Return current PHY settings */
cmd->autoneg = gp->want_autoneg;
ethtool_cmd_speed_set(cmd, gp->phy_mii.speed);
cmd->duplex = gp->phy_mii.duplex;
cmd->advertising = gp->phy_mii.advertising;
cmd->base.autoneg = gp->want_autoneg;
cmd->base.speed = gp->phy_mii.speed;
cmd->base.duplex = gp->phy_mii.duplex;
advertising = gp->phy_mii.advertising;
/* If we started with a forced mode, we don't have a default
* advertise set, we need to return something sensible so
* userland can re-enable autoneg properly.
*/
if (cmd->advertising == 0)
cmd->advertising = cmd->supported;
if (advertising == 0)
advertising = supported;
} else { // XXX PCS ?
cmd->supported =
supported =
(SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
SUPPORTED_Autoneg);
cmd->advertising = cmd->supported;
ethtool_cmd_speed_set(cmd, 0);
cmd->duplex = cmd->port = cmd->phy_address =
cmd->transceiver = cmd->autoneg = 0;
advertising = supported;
cmd->base.speed = 0;
cmd->base.duplex = 0;
cmd->base.port = 0;
cmd->base.phy_address = 0;
cmd->base.autoneg = 0;
/* serdes means usually a Fibre connector, with most fixed */
if (gp->phy_type == phy_serdes) {
cmd->port = PORT_FIBRE;
cmd->supported = (SUPPORTED_1000baseT_Half |
cmd->base.port = PORT_FIBRE;
supported = (SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE | SUPPORTED_Autoneg |
SUPPORTED_Pause | SUPPORTED_Asym_Pause);
cmd->advertising = cmd->supported;
cmd->transceiver = XCVR_INTERNAL;
advertising = supported;
if (gp->lstate == link_up)
ethtool_cmd_speed_set(cmd, SPEED_1000);
cmd->duplex = DUPLEX_FULL;
cmd->autoneg = 1;
cmd->base.speed = SPEED_1000;
cmd->base.duplex = DUPLEX_FULL;
cmd->base.autoneg = 1;
}
}
cmd->maxtxpkt = cmd->maxrxpkt = 0;
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
supported);
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
advertising);
return 0;
}
static int gem_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
static int gem_set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *cmd)
{
struct gem *gp = netdev_priv(dev);
u32 speed = ethtool_cmd_speed(cmd);
u32 speed = cmd->base.speed;
u32 advertising;
ethtool_convert_link_mode_to_legacy_u32(&advertising,
cmd->link_modes.advertising);
/* Verify the settings we care about. */
if (cmd->autoneg != AUTONEG_ENABLE &&
cmd->autoneg != AUTONEG_DISABLE)
if (cmd->base.autoneg != AUTONEG_ENABLE &&
cmd->base.autoneg != AUTONEG_DISABLE)
return -EINVAL;
if (cmd->autoneg == AUTONEG_ENABLE &&
cmd->advertising == 0)
if (cmd->base.autoneg == AUTONEG_ENABLE &&
advertising == 0)
return -EINVAL;
if (cmd->autoneg == AUTONEG_DISABLE &&
if (cmd->base.autoneg == AUTONEG_DISABLE &&
((speed != SPEED_1000 &&
speed != SPEED_100 &&
speed != SPEED_10) ||
(cmd->duplex != DUPLEX_HALF &&
cmd->duplex != DUPLEX_FULL)))
(cmd->base.duplex != DUPLEX_HALF &&
cmd->base.duplex != DUPLEX_FULL)))
return -EINVAL;
/* Apply settings and restart link process. */
......@@ -2666,13 +2682,13 @@ static int gem_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
static const struct ethtool_ops gem_ethtool_ops = {
.get_drvinfo = gem_get_drvinfo,
.get_link = ethtool_op_get_link,
.get_settings = gem_get_settings,
.set_settings = gem_set_settings,
.nway_reset = gem_nway_reset,
.get_msglevel = gem_get_msglevel,
.set_msglevel = gem_set_msglevel,
.get_wol = gem_get_wol,
.set_wol = gem_set_wol,
.get_link_ksettings = gem_get_link_ksettings,
.set_link_ksettings = gem_set_link_ksettings,
};
static int gem_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment