Merge bk://linuxusb.bkbits.net/i2c-devel-2.6

into home.osdl.org:/home/torvalds/v2.5/linux

Documentation/i2c/i2c-velleman

 i2c-velleman driver
 -------------------
-This is a driver for i2c-hw access for Velleman K9000 and other adapters.
+This is a driver for i2c-hw access for Velleman K8000 and other adapters.
 
 Useful links
 ------------
@@ -10,18 +10,14 @@ Velleman:
 Velleman K8000 Howto:
 	http://howto.htlw16.ac.at/k8000-howto.html
 
-
 K8000 and K8005 libraries
 -------------------------
-The project has lead to new libs for the Velleman K8000 and K8005..
+The project has lead to new libs for the Velleman K8000 and K8005:
 LIBK8000 v1.99.1 and LIBK8005 v0.21
 
-With these libs you can control the K8000 and K8005 with the original
-simple commands which are in the original Velleman software.
-Like SetIOchannel, ReadADchannel, SendStepCCWFull and many more.
-Via i2c kernel device /dev/velleman
+With these libs, you can control the K8000 interface card and the K8005
+stepper motor card with the simple commands which are in the original
+Velleman software, like SetIOchannel, ReadADchannel, SendStepCCWFull and
+many more, using /dev/velleman.
 
 The libs can be found on http://groups.yahoo.com/group/k8000/files/linux/
-
-The Velleman K8000 interface card on http://www.velleman.be/kits/k8000.htm
-The Velleman K8005 steppermotorcard on http://www.velleman.be/kits/k8005.htm

Documentation/i2c/porting-clients

+Revision 3, 2003-10-04
+Jean Delvare <khali@linux-fr.org>
+Greg KH <greg@kroah.com>
+
+This is a guide on how to convert I2C chip drivers from Linux 2.4 to
+Linux 2.6. I have been using existing drivers (lm75, lm78) as examples.
+Then I converted a driver myself (lm83) and updated this document.
+
+There are two sets of points below. The first set concerns technical
+changes. The second set concerns coding policy. Both are mandatory.
+
+Although reading this guide will help you porting drivers, I suggest
+you keep an eye on an already ported driver while porting your own
+driver. This will help you a lot understanding what this guide
+exactly means. Choose the chip driver that is the more similar to
+yours for best results.
+
+Technical changes:
+
+* [Includes] Get rid of "version.h". Replace <linux/i2c-proc.h> with
+  <linux/i2c-sensor.h>. Includes typically look like that:
+  #include <linux/module.h>
+  #include <linux/init.h>
+  #include <linux/slab.h>
+  #include <linux/i2c.h>
+  #include <linux/i2c-sensor.h>
+  #include <linux/i2c-vid.h>     /* if you need VRM support */
+  #include <asm/io.h>            /* if you have I/O operations */
+  Some extra headers may be required for a given driver.
+
+* [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, SENSORS_ISA_END
+  becomes I2C_CLIENT_ISA_END.
+
+* [Client data] Get rid of sysctl_id. Try using standard names for
+  register values (for example, temp_os becomes temp_max). You're
+  still relatively free here, but you *have* to follow the standard
+  names for sysfs files (see the Sysctl section below).
+
+* [Function prototypes] The detect functions loses its flags
+  parameter. Sysctl (e.g. lm75_temp) and miscellaneous (e.g.
+  swap_bytes) functions are off the list of prototypes. This
+  usually leaves five prototypes:
+  static int lm75_attach_adapter(struct i2c_adapter *adapter);
+  static int lm75_detect(struct i2c_adapter *adapter, int address,
+      int kind);
+  static void lm75_init_client(struct i2c_client *client);
+  static int lm75_detach_client(struct i2c_client *client);
+  static void lm75_update_client(struct i2c_client *client);
+
+* [Sysctl] All sysctl stuff is of course gone (defines, ctl_table
+  and functions). Instead, right after the static id definition
+  line, you have to define show and set functions for each sysfs
+  file. Only define set for writable values. Take a look at an
+  existing 2.6 driver for details (lm78 for example). Don't forget
+  to define the attributes for each file (this is that step that
+  links callback functions). Use the file names specified in
+  Documentation/i2c/sysfs-interface for the individual files. Also
+  convert the units these files read and write to the specified ones.
+  If you need to add a new type of file, please discuss it on the
+  sensors mailing list <sensors@stimpy.netroedge.com> by providing a
+  patch to the Documentation/i2c/sysfs-interface file.
+
+* [Attach] For I2C drivers, the attach function should make sure
+  that the adapter's class has I2C_ADAP_CLASS_SMBUS, using the
+  following construct:
+  if (!(adapter->class & I2C_ADAP_CLASS_SMBUS))
+          return 0;
+  ISA-only drivers of course don't need this.
+
+* [Detect] As mentioned earlier, the flags parameter is gone.
+  The type_name and client_name strings are replaced by a single
+  name string, which will be filled with a lowercase, short string
+  (typically the driver name, e.g. "lm75"). The errorN labels are
+  reduced to the number needed. If that number is 2 (i2c-only
+  drivers), it is advised that the labels are named exit and
+  exit_free. For i2c+isa drivers, labels should be named ERROR0,
+  ERROR1 and ERROR2. Don't forget to properly set err before
+  jumping to error labels. By the way, labels should be
+  left-aligned.
+  Use memset to fill the client and data area with 0x00.
+  Use i2c_set_clientdata to set the client data (as opposed to
+  a direct access to client->data).
+  Use strlcpy instead of strcpy to copy the client name.
+  Replace the sysctl directory registration by calls to
+  device_create_file. Move the driver initialization before any
+  sysfs file creation.
+
+* [Detach] Get rid of data, remove the call to
+  i2c_deregister_entry.
+
+* [Update] Don't access client->data directly, use
+  i2c_get_clientdata(client) instead.
+
+* [Interface] Init function should not print anything. Make sure
+  there is a MODULE_LICENSE() line.
+
+Coding policy:
+
+* [Copyright] Use (C), not (c), for copyright.
+
+* [Debug/log] Get rid of #ifdef DEBUG/#endif constructs whenever you
+  can. Calls to printk/pr_debug for debugging purposes are replaced
+  by calls to dev_dbg. Here is an example on how to call it (taken
+  from lm75_detect):
+  dev_dbg(&adapter->dev,
+          "lm75_detect called for an ISA bus adapter?!?\n");
+  Replace other printk calls with the dev_info, dev_err or dev_warn
+  function, as appropriate.
+
+* [Constants] Constants defines (registers, conversions, initial
+  values) should be aligned. This greatly improves readability.
+  Same goes for variables declarations. Alignments are achieved by the
+  means of tabs, not spaces. Remember that tabs are set to 8 in the
+  Linux kernel code.
+
+* [Structure definition] The name field should be standardized. All
+  lowercase and as simple as the driver name itself (e.g. "lm75").
+
+* [Layout] Avoid extra empty lines between comments and what they
+  comment. Respect the coding style (see Documentation/CodingStyle),
+  in particular when it comes to placing curly braces.

Documentation/i2c/summary

@@ -71,5 +71,5 @@ i2c-philips-par: Philips style parallel port adapter (uses i2c-algo-bit)
 i2c-adap-ibm_ocp: IBM 4xx processor I2C device (uses i2c-algo-ibm_ocp) (NOT BUILT BY DEFAULT)
 i2c-pport:       Primitive parallel port adapter (uses i2c-algo-bit)
 i2c-rpx:         RPX board Motorola 8xx I2C device (uses i2c-algo-8xx) (NOT BUILT BY DEFAULT)
-i2c-velleman:    Velleman K9000 parallel port adapter (uses i2c-algo-bit)
+i2c-velleman:    Velleman K8000 parallel port adapter (uses i2c-algo-bit)
 

Documentation/i2c/sysfs-interface

@@ -68,9 +68,7 @@ curr_max[1-n]	Current max value
 		Fixed point XXXXX, divide by 1000 to get Amps.
 		Read/Write.
 
-curr_min[1-n]	Current min or hysteresis value.
-		Preferably a hysteresis value, reported as a absolute
-		current, NOT a delta from the max value.
+curr_min[1-n]	Current min value.
 		Fixed point XXXXX, divide by 1000 to get Amps.
 		Read/Write.
 
@@ -144,25 +142,38 @@ sensor[1-3]	Sensor type selection.
 		Integers 1,2,3, or thermistor Beta value (3435)
 		Read/Write.
 
-temp_max[1-3]	Temperature max value.
+temp_max[1-4]	Temperature max value.
 		Fixed point value in form XXXXX and should be divided by
 		1000 to get degrees Celsius.
 		Read/Write value.
 
-temp_min[1-3]	Temperature min or hysteresis value.
+temp_min[1-3]	Temperature min value.
 		Fixed point value in form XXXXX and should be divided by
-		1000 to get degrees Celsius.  This is preferably a
-		hysteresis value, reported as a absolute temperature,
-		NOT a delta from the max value.
+		1000 to get degrees Celsius.
 		Read/Write value.
 
-temp_input[1-3] Temperature input value.
+temp_hyst[1-3]	Temperature hysteresis value.
+		Fixed point value in form XXXXX and should be divided by
+		1000 to get degrees Celsius.  Must be reported as an
+		absolute temperature, NOT a delta from the max value.
+		Read/Write value.
+
+temp_input[1-4] Temperature input value.
+		Fixed point value in form XXXXX and should be divided by
+		1000 to get degrees Celsius.
 		Read only value.
 
+temp_crit	Temperature critical value, typically greater than all
+		temp_max values.
+		Fixed point value in form XXXXX and should be divided by
+		1000 to get degrees Celsius.
+		Common to all temperature channels.
+		Read/Write value.
+
 		If there are multiple temperature sensors, temp_*1 is
 		generally the sensor inside the chip itself, generally
-		reported as "motherboard temperature".  temp_*2 and
-		temp_*3 are generally sensors external to the chip
+		reported as "motherboard temperature".  temp_*2 to
+		temp_*4 are generally sensors external to the chip
 		itself, for example the thermal diode inside the CPU or
 		a thermistor nearby.
 

Documentation/i2c/writing-clients

@@ -24,16 +24,14 @@ all clients from it. Remember, a driver structure contains general access
 routines, a client structure specific information like the actual I2C
 address.
 
-  struct i2c_driver foo_driver
-  {  
-    /* name           */  "Foo version 2.3 and later driver",
-    /* id             */  I2C_DRIVERID_FOO,
-    /* flags          */  I2C_DF_NOTIFY,
-    /* attach_adapter */  &foo_attach_adapter,
-    /* detach_client  */  &foo_detach_client,
-    /* command        */  &foo_command,   /* May be NULL */
-    /* inc_use        */  &foo_inc_use,   /* May be NULL */
-    /* dec_use        */  &foo_dec_use    /* May be NULL */
+  static struct i2c_driver foo_driver = {
+    .owner          = THIS_MODULE,
+    .name           = "Foo version 2.3 driver",
+    .id             = I2C_DRIVERID_FOO, /* usually from i2c-id.h */
+    .flags          = I2C_DF_NOTIFY,
+    .attach_adapter = &foo_attach_adapter,
+    .detach_client  = &foo_detach_client,
+    .command        = &foo_command /* may be NULL */
   }
  
 The name can be chosen freely, and may be upto 40 characters long. Please
@@ -50,43 +48,8 @@ This is almost always what you want.
 All other fields are for call-back functions which will be explained 
 below.
 
-
-Module usage count
-==================
-
-If your driver can also be compiled as a module, there are moments at 
-which the module can not be removed from memory. For example, when you
-are doing a lengthy transaction, or when you create a /proc directory,
-and some process has entered that directory (this last case is the
-main reason why these call-backs were introduced).
-
-To increase or decrease the module usage count, you can use the
-MOD_{INC,DEC}_USE_COUNT macros. They must be called from the module
-which needs to get its usage count changed; that is why each driver
-module has to implement its own callback.
-
-  void foo_inc_use (struct i2c_client *client)
-  {
-  #ifdef MODULE
-    MOD_INC_USE_COUNT;
-  #endif
-  }
-
-  void foo_dec_use (struct i2c_client *client)
-  {
-  #ifdef MODULE
-    MOD_DEC_USE_COUNT;
-  #endif
-  }
-
-Do not call these call-back functions directly; instead, use one of the
-following functions defined in i2c.h:
-  void i2c_inc_use_client(struct i2c_client *);
-  void i2c_dec_use_client(struct i2c_client *);
-
-You should *not* increase the module count just because a device is
-detected and a client created. This would make it impossible to remove
-an adapter driver! 
+There use to be two additional fields in this structure, inc_use et dec_use,
+for module usage count, but these fields were obsoleted and removed.
 
 
 Extra client data

drivers/i2c/algos/i2c-algo-bit.c

@@ -18,10 +18,8 @@
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
 /* ------------------------------------------------------------------------- */
 
-/* With some changes from Kysti Mlkki <kmalkki@cc.hut.fi> and even
-   Frodo Looijaard <frodol@dds.nl> */
-
-/* $Id: i2c-algo-bit.c,v 1.44 2003/01/21 08:08:16 kmalkki Exp $ */
+/* With some changes from Frodo Looijaard <frodol@dds.nl>, Kysti Mlkki
+   <kmalkki@cc.hut.fi> and Jean Delvare <khali@linux-fr.org> */
 
 /* #define DEBUG 1 */
 
@@ -87,8 +85,10 @@ static inline int sclhi(struct i2c_algo_bit_data *adap)
 	setscl(adap,1);
 
 	/* Not all adapters have scl sense line... */
-	if (adap->getscl == NULL )
+	if (adap->getscl == NULL ) {
+		udelay(adap->udelay);
 		return 0;
+	}
 
 	start=jiffies;
 	while (! getscl(adap) ) {	
@@ -222,68 +222,72 @@ static int i2c_inb(struct i2c_adapter *i2c_adap)
  */
 static int test_bus(struct i2c_algo_bit_data *adap, char* name) {
 	int scl,sda;
+
+	if (adap->getscl==NULL)
+		printk(KERN_INFO "i2c-algo-bit.o: Testing SDA only, "
+			"SCL is not readable.\n");
+
 	sda=getsda(adap);
-	if (adap->getscl==NULL) {
-		printk(KERN_WARNING "i2c-algo-bit.o: Warning: Adapter can't read from clock line - skipping test.\n");
-		return 0;		
-	}
-	scl=getscl(adap);
-	printk(KERN_INFO "i2c-algo-bit.o: Adapter: %s scl: %d  sda: %d -- testing...\n",
-	       name,getscl(adap),getsda(adap));
+	scl=(adap->getscl==NULL?1:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (0) scl=%d, sda=%d\n",scl,sda);
 	if (!scl || !sda ) {
-		printk(KERN_INFO " i2c-algo-bit.o: %s seems to be busy.\n",name);
+		printk(KERN_WARNING "i2c-algo-bit.o: %s seems to be busy.\n", name);
 		goto bailout;
 	}
+
 	sdalo(adap);
-	printk(KERN_DEBUG "i2c-algo-bit.o:1 scl: %d  sda: %d \n",getscl(adap),
-	       getsda(adap));
-	if ( 0 != getsda(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SDA stuck high!\n",name);
-		sdahi(adap);
+	sda=getsda(adap);
+	scl=(adap->getscl==NULL?1:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (1) scl=%d, sda=%d\n",scl,sda);
+	if ( 0 != sda ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck high!\n");
 		goto bailout;
 	}
-	if ( 0 == getscl(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SCL unexpected low while pulling SDA low!\n",
-			name);
+	if ( 0 == scl ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low "
+			"while pulling SDA low!\n");
 		goto bailout;
 	}		
+
 	sdahi(adap);
-	printk(KERN_DEBUG "i2c-algo-bit.o:2 scl: %d  sda: %d \n",getscl(adap),
-	       getsda(adap));
-	if ( 0 == getsda(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SDA stuck low!\n",name);
-		sdahi(adap);
+	sda=getsda(adap);
+	scl=(adap->getscl==NULL?1:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (2) scl=%d, sda=%d\n",scl,sda);
+	if ( 0 == sda ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck low!\n");
 		goto bailout;
 	}
-	if ( 0 == getscl(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SCL unexpected low while SDA high!\n",
-		       name);
-	goto bailout;
+	if ( 0 == scl ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low "
+			"while pulling SDA high!\n");
+		goto bailout;
 	}
+
 	scllo(adap);
-	printk(KERN_DEBUG "i2c-algo-bit.o:3 scl: %d  sda: %d \n",getscl(adap),
-	       getsda(adap));
-	if ( 0 != getscl(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SCL stuck high!\n",name);
-		sclhi(adap);
+	sda=getsda(adap);
+	scl=(adap->getscl==NULL?0:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (3) scl=%d, sda=%d\n",scl,sda);
+	if ( 0 != scl ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck high!\n");
 		goto bailout;
 	}
-	if ( 0 == getsda(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SDA unexpected low while pulling SCL low!\n",
-			name);
+	if ( 0 == sda ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low "
+			"while pulling SCL low!\n");
 		goto bailout;
 	}
+	
 	sclhi(adap);
-	printk(KERN_DEBUG "i2c-algo-bit.o:4 scl: %d  sda: %d \n",getscl(adap),
-	       getsda(adap));
-	if ( 0 == getscl(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SCL stuck low!\n",name);
-		sclhi(adap);
+	sda=getsda(adap);
+	scl=(adap->getscl==NULL?1:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (4) scl=%d, sda=%d\n",scl,sda);
+	if ( 0 == scl ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck low!\n");
 		goto bailout;
 	}
-	if ( 0 == getsda(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SDA unexpected low while SCL high!\n",
-			name);
+	if ( 0 == sda ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low "
+			"while pulling SCL high!\n");
 		goto bailout;
 	}
 	printk(KERN_INFO "i2c-algo-bit.o: %s passed test.\n",name);

drivers/i2c/algos/i2c-algo-ite.c

@@ -60,27 +60,13 @@
  	/* debug the protocol by showing transferred bits */
 #define DEF_TIMEOUT 16
 
-/* debugging - slow down transfer to have a look at the data .. 	*/
-/* I use this with two leds&resistors, each one connected to sda,scl 	*/
-/* respectively. This makes sure that the algorithm works. Some chips   */
-/* might not like this, as they have an internal timeout of some mils	*/
-/*
-#define SLO_IO      jif=jiffies;while(jiffies<=jif+i2c_table[minor].veryslow)\
-                        cond_resched();
-*/
-
 
 /* ----- global variables ---------------------------------------------	*/
 
-#ifdef SLO_IO
-	int jif;
-#endif
-
 /* module parameters:
  */
 static int i2c_debug=1;
 static int iic_test=0;	/* see if the line-setting functions work	*/
-static int iic_scan=0;	/* have a look at what's hanging 'round		*/
 
 /* --- setting states on the bus with the right timing: ---------------	*/
 
@@ -757,8 +743,6 @@ static struct i2c_algorithm iic_algo = {
  */
 int i2c_iic_add_bus(struct i2c_adapter *adap)
 {
-	int i;
-	short status;
 	struct i2c_algo_iic_data *iic_adap = adap->algo_data;
 
 	if (iic_test) {
@@ -782,24 +766,6 @@ int i2c_iic_add_bus(struct i2c_adapter *adap)
 	i2c_add_adapter(adap);
 	iic_init(iic_adap);
 
-	/* scan bus */
-	/* By default scanning the bus is turned off. */
-	if (iic_scan) {
-		printk(KERN_INFO " i2c-algo-ite: scanning bus %s.\n",
-		       adap->name);
-		for (i = 0x00; i < 0xff; i+=2) {
-			iic_outw(iic_adap, ITE_I2CSAR, i);
-			iic_start(iic_adap);
-			if ( (wait_for_pin(iic_adap, &status) == 0) && 
-			    ((status & ITE_I2CHSR_DNE) == 0) ) { 
-				printk(KERN_INFO "\n(%02x)\n",i>>1); 
-			} else {
-				printk(KERN_INFO "."); 
-				iic_reset(iic_adap);
-			}
-			udelay(iic_adap->udelay);
-		}
-	}
 	return 0;
 }
 
@@ -839,11 +805,9 @@ MODULE_DESCRIPTION("ITE iic algorithm");
 MODULE_LICENSE("GPL");
 
 MODULE_PARM(iic_test, "i");
-MODULE_PARM(iic_scan, "i");
 MODULE_PARM(i2c_debug,"i");
 
 MODULE_PARM_DESC(iic_test, "Test if the I2C bus is available");
-MODULE_PARM_DESC(iic_scan, "Scan for active chips on the bus");
 MODULE_PARM_DESC(i2c_debug,
         "debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol");
 

drivers/i2c/busses/Kconfig

@@ -161,11 +161,12 @@ config I2C_PIIX4
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
-	  versions of the chipset is supported:
+	  versions of the chipset are supported:
 	    Intel PIIX4
 	    Intel 440MX
 	    Serverworks OSB4
 	    Serverworks CSB5
+	    Serverworks CSB6
 	    SMSC Victory66
 
 	  This driver can also be built as a module.  If so, the module
@@ -201,7 +202,7 @@ config I2C_SAVAGE4
 
 config SCx200_I2C
 	tristate "NatSemi SCx200 I2C using GPIO pins"
-	depends on SCx200 && I2C_ALGOBIT
+	depends on SCx200_GPIO && I2C_ALGOBIT
 	help
 	  Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
 
@@ -228,7 +229,7 @@ config SCx200_I2C_SDA
 
 config SCx200_ACB
 	tristate "NatSemi SCx200 ACCESS.bus"
-	depends on I2C_ALGOBIT!=n && I2C
+	depends on I2C
 	help
 	  Enable the use of the ACCESS.bus controllers of a SCx200 processor.
 
@@ -275,10 +276,10 @@ config I2C_SIS96X
 	  will be called i2c-sis96x.
 
 config I2C_VELLEMAN
-	tristate "Velleman K9000 adapter"
+	tristate "Velleman K8000 adapter"
 	depends on I2C_ALGOBIT && ISA
 	help
-	  This supports the Velleman K9000 parallel-port I2C adapter.  Say Y
+	  This supports the Velleman K8000 parallel-port I2C adapter.  Say Y
 	  if you own such an adapter.
 
 	  This support is also available as a module.  If so, the module 
@@ -309,6 +310,7 @@ config I2C_VIAPRO
 	  8233
 	  8233A
 	  8235
+	  8237
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-viapro.

drivers/i2c/busses/i2c-amd756.c

@@ -28,10 +28,12 @@
     2002-04-08: Added nForce support. (Csaba Halasz)
     2002-10-03: Fixed nForce PnP I/O port. (Michael Steil)
     2002-12-28: Rewritten into something that resembles a Linux driver (hch)
+    2003-11-29: Added back AMD8111 removed by the previous rewrite.
+                (Philip Pokorny)
 */
 
 /*
-   Supports AMD756, AMD766, AMD768 and nVidia nForce
+   Supports AMD756, AMD766, AMD768, AMD8111 and nVidia nForce
    Note: we assume there can only be one device, with one SMBus interface.
 */
 
@@ -213,9 +215,8 @@ static s32 amd756_access(struct i2c_adapter * adap, u16 addr,
 	case I2C_SMBUS_BYTE:
 		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 		       SMB_HOST_ADDRESS);
-		/* TODO: Why only during write? */
 		if (read_write == I2C_SMBUS_WRITE)
-			outb_p(command, SMB_HOST_COMMAND);
+			outb_p(command, SMB_HOST_DATA);
 		size = AMD756_BYTE;
 		break;
 	case I2C_SMBUS_BYTE_DATA:
@@ -308,12 +309,13 @@ static struct i2c_adapter amd756_adapter = {
 	.name		= "unset",
 };
 
-enum chiptype { AMD756, AMD766, AMD768, NFORCE };
+enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 };
 
 static struct pci_device_id amd756_ids[] = {
 	{PCI_VENDOR_ID_AMD, 0x740B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD756 },
 	{PCI_VENDOR_ID_AMD, 0x7413, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD766 },
 	{PCI_VENDOR_ID_AMD, 0x7443, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD768 },
+	{PCI_VENDOR_ID_AMD, 0x746B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD8111 },
 	{PCI_VENDOR_ID_NVIDIA, 0x01B4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE },
 	{ 0, }
 };
@@ -321,7 +323,8 @@ static struct pci_device_id amd756_ids[] = {
 static int __devinit amd756_probe(struct pci_dev *pdev,
 				  const struct pci_device_id *id)
 {
-	int nforce = (id->driver_data == NFORCE), error;
+	int nforce = (id->driver_data == NFORCE);
+	int error;
 	u8 temp;
 	
 	if (amd756_ioport) {
@@ -368,7 +371,7 @@ static int __devinit amd756_probe(struct pci_dev *pdev,
 	amd756_adapter.dev.parent = &pdev->dev;
 
 	snprintf(amd756_adapter.name, I2C_NAME_SIZE,
-		"SMBus AMD75x adapter at %04x", amd756_ioport);
+		"SMBus AMD756 adapter at %04x", amd756_ioport);
 
 	error = i2c_add_adapter(&amd756_adapter);
 	if (error) {
@@ -391,7 +394,7 @@ static void __devexit amd756_remove(struct pci_dev *dev)
 }
 
 static struct pci_driver amd756_driver = {
-	.name		= "amd75x smbus",
+	.name		= "amd756 smbus",
 	.id_table	= amd756_ids,
 	.probe		= amd756_probe,
 	.remove		= __devexit_p(amd756_remove),
@@ -408,7 +411,7 @@ static void __exit amd756_exit(void)
 }
 
 MODULE_AUTHOR("Merlin Hughes <merlin@merlin.org>");
-MODULE_DESCRIPTION("AMD756/766/768/nVidia nForce SMBus driver");
+MODULE_DESCRIPTION("AMD756/766/768/8111 and nVidia nForce SMBus driver");
 MODULE_LICENSE("GPL");
 
 module_init(amd756_init)

drivers/i2c/busses/i2c-amd8111.c

@@ -192,7 +192,7 @@ s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short flags,
 
 		case I2C_SMBUS_BYTE:
 			if (read_write == I2C_SMBUS_WRITE)
-				amd_ec_write(smbus, AMD_SMB_DATA, data->byte);
+				amd_ec_write(smbus, AMD_SMB_CMD, command);
 			protocol |= AMD_SMB_PRTCL_BYTE;
 			break;
 

drivers/i2c/busses/i2c-ibm_iic.c

@@ -48,10 +48,6 @@
 MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
-static int iic_scan = 0;
-MODULE_PARM(iic_scan, "i");
-MODULE_PARM_DESC(iic_scan, "Scan for active chips on the bus");
-
 static int iic_force_poll = 0;
 MODULE_PARM(iic_force_poll, "i");
 MODULE_PARM_DESC(iic_force_poll, "Force polling mode");
@@ -517,32 +513,6 @@ static struct i2c_algorithm iic_algo = {
 	.functionality	= iic_func
 };
 
-/*
- * Scan bus for valid 7-bit addresses (ie things that ACK on 1 byte read)
- * We only scan range [0x08 - 0x77], all other addresses are reserved anyway
- */
-static void __devinit iic_scan_bus(struct ibm_iic_private* dev)
-{
-	int found = 0;
-	char dummy;
-	struct i2c_msg msg = {
-		.buf   = &dummy,
-		.len   = sizeof(dummy),
-		.flags = I2C_M_RD
-	};
-	
-	printk(KERN_INFO "ibm-iic%d: scanning bus...\n" KERN_INFO, dev->idx);
-	
-	for (msg.addr = 8; msg.addr < 0x78; ++msg.addr)
-		if (iic_xfer(&dev->adap, &msg, 1) == 1){
-			++found;
-			printk(" 0x%02x", msg.addr);
-		}
-
-	printk("%sibm-iic%d: %d device(s) detected\n", 
-		found ? "\n" KERN_INFO : "", dev->idx, found);
-}
-
 /*
  * Calculates IICx_CLCKDIV value for a specific OPB clock frequency
  */
@@ -649,10 +619,6 @@ static int __devinit iic_probe(struct ocp_device *ocp){
 	printk(KERN_INFO "ibm-iic%d: using %s mode\n", dev->idx,
 		dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
 
-	/* Scan bus if requested by user */
-	if (iic_scan)
-		iic_scan_bus(dev);
-
 	return 0;
 
 fail:	

drivers/i2c/busses/i2c-piix4.c

@@ -22,7 +22,7 @@
 /*
    Supports:
 	Intel PIIX4, 440MX
-	Serverworks OSB4, CSB5
+	Serverworks OSB4, CSB5, CSB6
 	SMSC Victory66
 
    Note: we assume there can only be one device, with one SMBus interface.
@@ -99,6 +99,13 @@ MODULE_PARM_DESC(force_addr,
 		 "Forcibly enable the PIIX4 at the given address. "
 		 "EXTREMELY DANGEROUS!");
 
+/* If fix_hstcfg is set to anything different from 0, we reset one of the
+   registers to be a valid value. */
+static int fix_hstcfg = 0;
+MODULE_PARM(fix_hstcfg, "i");
+MODULE_PARM_DESC(fix_hstcfg,
+		"Fix config register. Needed on some boards (Force CPCI735).");
+
 static int piix4_transaction(void);
 
 
@@ -164,9 +171,17 @@ static int piix4_setup(struct pci_dev *PIIX4_dev, const struct pci_device_id *id
 	/* Some BIOS will set up the chipset incorrectly and leave a register
 	   in an undefined state (causing I2C to act very strangely). */
 	if (temp & 0x02) {
-		dev_info(&PIIX4_dev->dev, "Worked around buggy BIOS (I2C)\n");
-		temp = temp & 0xfd;
-		pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp);
+		if (fix_hstcfg) {
+			dev_info(&PIIX4_dev->dev, "Working around buggy BIOS "
+					"(I2C)\n");
+			temp &= 0xfd;
+			pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp);
+		} else {
+			dev_info(&PIIX4_dev->dev, "Unusual config register "
+					"value\n");
+			dev_info(&PIIX4_dev->dev, "Try using fix_hstcfg=1 if "
+					"you experience problems\n");
+		}
 	}
  
 	/* If force_addr is set, we program the new address here. Just to make
@@ -422,6 +437,13 @@ static struct pci_device_id piix4_ids[] = {
 		.subdevice =	PCI_ANY_ID,
 		.driver_data =	0,
 	},
+	{
+		.vendor =	PCI_VENDOR_ID_SERVERWORKS,
+		.device =	PCI_DEVICE_ID_SERVERWORKS_CSB6,
+		.subvendor =	PCI_ANY_ID,
+		.subdevice =	PCI_ANY_ID,
+		.driver_data =	0,
+	},
 	{
 		.vendor =	PCI_VENDOR_ID_INTEL,
 		.device =	PCI_DEVICE_ID_INTEL_82443MX_3,

drivers/i2c/busses/i2c-savage4.c

 /*
     i2c-savage4.c - Part of lm_sensors, Linux kernel modules for hardware
               monitoring
-    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>,
-    Philip Edelbrock <phil@netroedge.com>,
-    Ralph Metzler <rjkm@thp.uni-koeln.de>, and
+    Copyright (C) 1998-2003  The LM Sensors Team
+    Alexander Wold <awold@bigfoot.com>
     Mark D. Studebaker <mdsxyz123@yahoo.com>
     
-    Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
-    Simon Vogl
+    Based on i2c-voodoo3.c.
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -195,9 +193,7 @@ static void __exit i2c_savage4_exit(void)
 	pci_unregister_driver(&savage4_driver);
 }
 
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
-		"Philip Edelbrock <phil@netroedge.com>, "
-		"Ralph Metzler <rjkm@thp.uni-koeln.de>, "
+MODULE_AUTHOR("Alexander Wold <awold@bigfoot.com> "
 		"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
 MODULE_DESCRIPTION("Savage4 I2C/SMBus driver");
 MODULE_LICENSE("GPL");

drivers/i2c/busses/i2c-velleman.c

 /* ------------------------------------------------------------------------- */
-/* i2c-velleman.c i2c-hw access for Velleman K9000 adapters		     */
+/* i2c-velleman.c i2c-hw access for Velleman K8000 adapters		     */
 /* ------------------------------------------------------------------------- */
 /*   Copyright (C) 1995-96, 2000 Simon G. Vogl
 

drivers/i2c/busses/i2c-viapro.c

@@ -29,6 +29,7 @@
 	8233
 	8233A (0x3147 and 0x3177)
 	8235
+	8237
    Note: we assume there can only be one device, with one SMBus interface.
 */
 
@@ -434,6 +435,13 @@ static struct pci_device_id vt596_ids[] = {
 		.subdevice	= PCI_ANY_ID,
 		.driver_data	= SMBBA3
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_VIA,
+		.device 	= PCI_DEVICE_ID_VIA_8237,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= SMBBA3
+	},
 	{
 		.vendor		= PCI_VENDOR_ID_VIA,
 		.device 	= PCI_DEVICE_ID_VIA_8231_4,

drivers/i2c/chips/Kconfig

@@ -68,6 +68,17 @@ config SENSORS_LM78
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm78.
 
+config SENSORS_LM83
+	tristate "National Semiconductor LM83"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for National Semiconductor
+	  LM83 sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm83.
+
 config SENSORS_LM85
 	tristate "National Semiconductor LM85 and compatibles"
 	depends on I2C && EXPERIMENTAL

drivers/i2c/chips/Makefile

@@ -10,5 +10,6 @@ obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
 obj-$(CONFIG_SENSORS_IT87)	+= it87.o
 obj-$(CONFIG_SENSORS_LM75)	+= lm75.o
 obj-$(CONFIG_SENSORS_LM78)	+= lm78.o
+obj-$(CONFIG_SENSORS_LM83)	+= lm83.o
 obj-$(CONFIG_SENSORS_LM85)	+= lm85.o
 obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o

drivers/i2c/chips/it87.c

@@ -343,7 +343,6 @@ static ssize_t show_temp(struct device *dev, char *buf, int nr)
 	it87_update_client(client);
 	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])*100 );
 }
-/* more like overshoot temperature */
 static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -351,7 +350,6 @@ static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
 	it87_update_client(client);
 	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr])*100);
 }
-/* more like hysteresis temperature */
 static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -414,7 +412,6 @@ show_temp_offset(1);
 show_temp_offset(2);
 show_temp_offset(3);
 
-/* more like overshoot temperature */
 static ssize_t show_sensor(struct device *dev, char *buf, int nr)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -563,15 +560,15 @@ show_fan_offset(1);
 show_fan_offset(2);
 show_fan_offset(3);
 
-/* Alarm */
-static ssize_t show_alarm(struct device *dev, char *buf)
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, char *buf)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct it87_data *data = i2c_get_clientdata(client);
 	it87_update_client(client);
 	return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms));
 }
-static DEVICE_ATTR(alarm, S_IRUGO | S_IWUSR, show_alarm, NULL);
+static DEVICE_ATTR(alarms, S_IRUGO | S_IWUSR, show_alarms, NULL);
 
 /* This function is called when:
      * it87_driver is inserted (when this module is loaded), for each
@@ -751,7 +748,7 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind)
 	device_create_file(&new_client->dev, &dev_attr_fan_div1);
 	device_create_file(&new_client->dev, &dev_attr_fan_div2);
 	device_create_file(&new_client->dev, &dev_attr_fan_div3);
-	device_create_file(&new_client->dev, &dev_attr_alarm);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
 
 	return 0;
 

drivers/i2c/chips/lm75.c

@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/i2c-sensor.h>
+#include "lm75.h"
 
 
 /* Addresses to scan */
@@ -44,17 +45,6 @@ SENSORS_INSMOD_1(lm75);
 #define LM75_REG_TEMP_HYST	0x02
 #define LM75_REG_TEMP_OS	0x03
 
-/* Conversions. Rounding and limit checking is only done on the TO_REG
-   variants. Note that you should be a bit careful with which arguments
-   these macros are called: arguments may be evaluated more than once.
-   Fixing this is just not worth it. */
-#define TEMP_FROM_REG(val)	((((val & 0x7fff) >> 7) * 5) | ((val & 0x8000)?-256:0))
-#define TEMP_TO_REG(val)	(SENSORS_LIMIT((val<0?(0x200+((val)/5))<<7:(((val) + 2) / 5) << 7),0,0xffff))
-
-/* Initial values */
-#define LM75_INIT_TEMP_OS	600
-#define LM75_INIT_TEMP_HYST	500
-
 /* Each client has this additional data */
 struct lm75_data {
 	struct semaphore	update_lock;
@@ -87,15 +77,12 @@ static struct i2c_driver lm75_driver = {
 static int lm75_id = 0;
 
 #define show(value)	\
-static ssize_t show_##value(struct device *dev, char *buf)	\
-{								\
-	struct i2c_client *client = to_i2c_client(dev);		\
-	struct lm75_data *data = i2c_get_clientdata(client);	\
-	int temp;						\
-								\
-	lm75_update_client(client);				\
-	temp = TEMP_FROM_REG(data->value);			\
-	return sprintf(buf, "%d\n", temp * 100);		\
+static ssize_t show_##value(struct device *dev, char *buf)		\
+{									\
+	struct i2c_client *client = to_i2c_client(dev);			\
+	struct lm75_data *data = i2c_get_clientdata(client);		\
+	lm75_update_client(client);					\
+	return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value));	\
 }
 show(temp_max);
 show(temp_hyst);
@@ -106,9 +93,8 @@ static ssize_t set_##value(struct device *dev, const char *buf, size_t count)	\
 {								\
 	struct i2c_client *client = to_i2c_client(dev);		\
 	struct lm75_data *data = i2c_get_clientdata(client);	\
-	int temp = simple_strtoul(buf, NULL, 10) / 100;		\
-								\
-	data->value = TEMP_TO_REG(temp);			\
+	int temp = simple_strtoul(buf, NULL, 10);		\
+	data->value = LM75_TEMP_TO_REG(temp);			\
 	lm75_write_value(client, reg, data->value);		\
 	return count;						\
 }
@@ -116,7 +102,7 @@ set(temp_max, LM75_REG_TEMP_OS);
 set(temp_hyst, LM75_REG_TEMP_HYST);
 
 static DEVICE_ATTR(temp_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
-static DEVICE_ATTR(temp_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
+static DEVICE_ATTR(temp_hyst, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
 static DEVICE_ATTR(temp_input, S_IRUGO, show_temp_input, NULL);
 
 static int lm75_attach_adapter(struct i2c_adapter *adapter)
@@ -209,7 +195,7 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
 	
 	/* Register sysfs hooks */
 	device_create_file(&new_client->dev, &dev_attr_temp_max);
-	device_create_file(&new_client->dev, &dev_attr_temp_min);
+	device_create_file(&new_client->dev, &dev_attr_temp_hyst);
 	device_create_file(&new_client->dev, &dev_attr_temp_input);
 
 	return 0;
@@ -258,10 +244,6 @@ static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
 static void lm75_init_client(struct i2c_client *client)
 {
 	/* Initialize the LM75 chip */
-	lm75_write_value(client, LM75_REG_TEMP_OS,
-			 TEMP_TO_REG(LM75_INIT_TEMP_OS));
-	lm75_write_value(client, LM75_REG_TEMP_HYST,
-			 TEMP_TO_REG(LM75_INIT_TEMP_HYST));
 	lm75_write_value(client, LM75_REG_CONF, 0);
 }
 

drivers/i2c/chips/lm75.h

+/*
+    lm75.h - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    This file contains common code for encoding/decoding LM75 type
+    temperature readings, which are emulated by many of the chips
+    we support.  As the user is unlikely to load more than one driver
+    which contains this code, we don't worry about the wasted space.
+*/
+
+#include <linux/i2c-sensor.h>
+
+/* straight from the datasheet */
+#define LM75_TEMP_MIN (-55000)
+#define LM75_TEMP_MAX 125000
+
+/* TEMP: 0.001C/bit (-55C to +125C)
+   REG: (0.5C/bit, two's complement) << 7 */
+static inline u16 LM75_TEMP_TO_REG(int temp)
+{
+	int ntemp = SENSORS_LIMIT(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
+	ntemp += (ntemp<0 ? -250 : 250);
+	return (u16)((ntemp / 500) << 7);
+}
+
+static inline int LM75_TEMP_FROM_REG(u16 reg)
+{
+	/* use integer division instead of equivalent right shift to
+	   guarantee arithmetic shift and preserve the sign */
+	return ((s16)reg / 128) * 500;
+}
+

drivers/i2c/chips/lm78.c

@@ -367,7 +367,7 @@ static ssize_t set_temp_hyst(struct device *dev, const char *buf, size_t count)
 static DEVICE_ATTR(temp_input, S_IRUGO, show_temp, NULL)
 static DEVICE_ATTR(temp_max, S_IRUGO | S_IWUSR,
 		show_temp_over, set_temp_over)
-static DEVICE_ATTR(temp_min, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR(temp_hyst, S_IRUGO | S_IWUSR,
 		show_temp_hyst, set_temp_hyst)
 
 /* 3 Fans */
@@ -674,8 +674,8 @@ int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
 	device_create_file(&new_client->dev, &dev_attr_in_min6);
 	device_create_file(&new_client->dev, &dev_attr_in_max6);
 	device_create_file(&new_client->dev, &dev_attr_temp_input);
-	device_create_file(&new_client->dev, &dev_attr_temp_min);
 	device_create_file(&new_client->dev, &dev_attr_temp_max);
+	device_create_file(&new_client->dev, &dev_attr_temp_hyst);
 	device_create_file(&new_client->dev, &dev_attr_fan_input1);
 	device_create_file(&new_client->dev, &dev_attr_fan_min1);
 	device_create_file(&new_client->dev, &dev_attr_fan_div1);

drivers/i2c/chips/via686a.c

@@ -496,21 +496,19 @@ static ssize_t show_temp(struct device *dev, char *buf, int nr) {
 	via686a_update_client(client);
 	return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr])*100 );
 }
-/* more like overshoot temperature */
-static ssize_t show_temp_max(struct device *dev, char *buf, int nr) {
+static ssize_t show_temp_over(struct device *dev, char *buf, int nr) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
 	via686a_update_client(client);
 	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr])*100);
 }
-/* more like hysteresis temperature */
-static ssize_t show_temp_min(struct device *dev, char *buf, int nr) {
+static ssize_t show_temp_hyst(struct device *dev, char *buf, int nr) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
 	via686a_update_client(client);
 	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr])*100);
 }
-static ssize_t set_temp_max(struct device *dev, const char *buf, 
+static ssize_t set_temp_over(struct device *dev, const char *buf, 
 		size_t count, int nr) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
@@ -519,7 +517,7 @@ static ssize_t set_temp_max(struct device *dev, const char *buf,
 	via686a_write_value(client, VIA686A_REG_TEMP_OVER(nr), data->temp_over[nr]);
 	return count;
 }
-static ssize_t set_temp_min(struct device *dev, const char *buf, 
+static ssize_t set_temp_hyst(struct device *dev, const char *buf, 
 		size_t count, int nr) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
@@ -534,30 +532,30 @@ static ssize_t show_temp_##offset (struct device *dev, char *buf)	\
 	return show_temp(dev, buf, 0x##offset - 1);			\
 }									\
 static ssize_t								\
-show_temp_##offset##_max (struct device *dev, char *buf)		\
+show_temp_##offset##_over (struct device *dev, char *buf)		\
 {									\
-	return show_temp_max(dev, buf, 0x##offset - 1);			\
+	return show_temp_over(dev, buf, 0x##offset - 1);			\
 }									\
 static ssize_t								\
-show_temp_##offset##_min (struct device *dev, char *buf)		\
+show_temp_##offset##_hyst (struct device *dev, char *buf)		\
 {									\
-	return show_temp_min(dev, buf, 0x##offset - 1);			\
+	return show_temp_hyst(dev, buf, 0x##offset - 1);			\
 }									\
-static ssize_t set_temp_##offset##_max (struct device *dev, 		\
+static ssize_t set_temp_##offset##_over (struct device *dev, 		\
 		const char *buf, size_t count) 				\
 {									\
-	return set_temp_max(dev, buf, count, 0x##offset - 1);		\
+	return set_temp_over(dev, buf, count, 0x##offset - 1);		\
 }									\
-static ssize_t set_temp_##offset##_min (struct device *dev, 		\
+static ssize_t set_temp_##offset##_hyst (struct device *dev, 		\
 		const char *buf, size_t count) 				\
 {									\
-	return set_temp_min(dev, buf, count, 0x##offset - 1);		\
+	return set_temp_hyst(dev, buf, count, 0x##offset - 1);		\
 }									\
 static DEVICE_ATTR(temp_input##offset, S_IRUGO, show_temp_##offset, NULL) \
 static DEVICE_ATTR(temp_max##offset, S_IRUGO | S_IWUSR, 		\
-		show_temp_##offset##_max, set_temp_##offset##_max) 	\
-static DEVICE_ATTR(temp_min##offset, S_IRUGO | S_IWUSR, 		\
-		show_temp_##offset##_min, set_temp_##offset##_min)	
+		show_temp_##offset##_over, set_temp_##offset##_over) 	\
+static DEVICE_ATTR(temp_hyst##offset, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_hyst, set_temp_##offset##_hyst)	
 
 show_temp_offset(1);
 show_temp_offset(2);
@@ -637,14 +635,14 @@ static DEVICE_ATTR(fan_div##offset, S_IRUGO | S_IWUSR, 			\
 show_fan_offset(1);
 show_fan_offset(2);
 
-/* Alarm */
-static ssize_t show_alarm(struct device *dev, char *buf) {
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, char *buf) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
 	via686a_update_client(client);
 	return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms));
 }
-static DEVICE_ATTR(alarm, S_IRUGO | S_IWUSR, show_alarm, NULL);
+static DEVICE_ATTR(alarms, S_IRUGO | S_IWUSR, show_alarms, NULL);
 
 /* The driver. I choose to use type i2c_driver, as at is identical to both
    smbus_driver and isa_driver, and clients could be of either kind */
@@ -760,16 +758,16 @@ static int via686a_detect(struct i2c_adapter *adapter, int address, int kind)
 	device_create_file(&new_client->dev, &dev_attr_temp_max1);
 	device_create_file(&new_client->dev, &dev_attr_temp_max2);
 	device_create_file(&new_client->dev, &dev_attr_temp_max3);
-	device_create_file(&new_client->dev, &dev_attr_temp_min1);
-	device_create_file(&new_client->dev, &dev_attr_temp_min2);
-	device_create_file(&new_client->dev, &dev_attr_temp_min3);
+	device_create_file(&new_client->dev, &dev_attr_temp_hyst1);
+	device_create_file(&new_client->dev, &dev_attr_temp_hyst2);
+	device_create_file(&new_client->dev, &dev_attr_temp_hyst3);
 	device_create_file(&new_client->dev, &dev_attr_fan_input1);
 	device_create_file(&new_client->dev, &dev_attr_fan_input2);
 	device_create_file(&new_client->dev, &dev_attr_fan_min1);
 	device_create_file(&new_client->dev, &dev_attr_fan_min2);
 	device_create_file(&new_client->dev, &dev_attr_fan_div1);
 	device_create_file(&new_client->dev, &dev_attr_fan_div2);
-	device_create_file(&new_client->dev, &dev_attr_alarm);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
 
 	return 0;
 

drivers/pcmcia/sa1100_stork.c

@@ -23,7 +23,6 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/device.h>
-#include <linux/i2c.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>

include/linux/i2c-id.h

@@ -153,6 +153,7 @@
 #define I2C_DRIVERID_FS451 1037
 #define I2C_DRIVERID_W83627HF 1038
 #define I2C_DRIVERID_LM85 1039
+#define I2C_DRIVERID_LM83 1040
 
 /*
  * ---- Adapter types ----------------------------------------------------