Commit 9352aead authored by John David Anglin's avatar John David Anglin Committed by Helge Deller

Revert "parisc: Re-enable interrupts early"

This reverts commit 5c38602d.

Interrupts can't be enabled early because the register saves are done on
the thread stack prior to switching to the IRQ stack.  This caused stack
overflows and the thread stack needed increasing to 32k.  Even then,
stack overflows still occasionally occurred.

Background:
Even with a 32 kB thread stack, I have seen instances where the thread
stack overflowed on the mx3210 buildd.  Detection of stack overflow only
occurs when we have an external interrupt.  When an external interrupt
occurs, we switch to the thread stack if we are not already on a kernel
stack.  Then, registers and specials are saved to the kernel stack.

The bug occurs in intr_return where interrupts are reenabled prior to
returning from the interrupt.  This was done incase we need to schedule
or deliver signals.  However, it introduces the possibility that
multiple external interrupts may occur on the thread stack and cause a
stack overflow.  These might not be detected and cause the kernel to
misbehave in random ways.

This patch changes the code back to only reenable interrupts when we are
going to schedule or deliver signals.  As a result, we generally return
from an interrupt before reenabling interrupts.  This minimizes the
growth of the thread stack.

Fixes: 5c38602d ("parisc: Re-enable interrupts early")
Signed-off-by: default avatarJohn David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: default avatarHelge Deller <deller@gmx.de>
parent 6a16fc32
......@@ -878,9 +878,6 @@ ENTRY_CFI(syscall_exit_rfi)
STREG %r19,PT_SR7(%r16)
intr_return:
/* NOTE: Need to enable interrupts incase we schedule. */
ssm PSW_SM_I, %r0
/* check for reschedule */
mfctl %cr30,%r1
LDREG TI_FLAGS(%r1),%r19 /* sched.h: TIF_NEED_RESCHED */
......@@ -907,6 +904,11 @@ intr_check_sig:
LDREG PT_IASQ1(%r16), %r20
cmpib,COND(=),n 0,%r20,intr_restore /* backward */
/* NOTE: We need to enable interrupts if we have to deliver
* signals. We used to do this earlier but it caused kernel
* stack overflows. */
ssm PSW_SM_I, %r0
copy %r0, %r25 /* long in_syscall = 0 */
#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
......@@ -958,6 +960,10 @@ intr_do_resched:
cmpib,COND(=) 0, %r20, intr_do_preempt
nop
/* NOTE: We need to enable interrupts if we schedule. We used
* to do this earlier but it caused kernel stack overflows. */
ssm PSW_SM_I, %r0
#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment