Merge tag 'tegra-for-5.7-soc' of...

Merge tag 'tegra-for-5.7-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc

soc/tegra: Changes for v5.7-rc1

These changes implement various clocks that are controlled by the PMC
and add support for configuring the voltage level of some pins (needed
for example to support high-speed modes on the SD/MMC interfaces).

* tag 'tegra-for-5.7-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: pmc: Cleanup whitespace usage
  soc/tegra: pmc: Add pins for Tegra194
  soc/tegra: Add support for 32 kHz blink clock
  soc/tegra: Add Tegra PMC clocks registration into PMC driver
  dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding
  dt-bindings: phy: tegra-xusb: Add usb-role-switch
  dt-bindings: phy: tegra: Add Tegra194 support
  dt-bindings: soc: tegra-pmc: Add ID for Tegra PMC 32 kHz blink clock
  dt-bindings: soc: tegra-pmc: Add Tegra PMC clock bindings
  dt-bindings: tegra: Convert Tegra PMC bindings to YAML
  dt-bindings: clock: tegra: Add IDs for OSC clocks

Link: https://lore.kernel.org/r/20200313165848.2915133-3-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt

@@ -37,6 +37,7 @@ Required properties:
   - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"
   - Tegra210: "nvidia,tegra210-xusb-padctl"
   - Tegra186: "nvidia,tegra186-xusb-padctl"
+  - Tegra194: "nvidia,tegra194-xusb-padctl"
 - reg: Physical base address and length of the controller's registers.
 - resets: Must contain an entry for each entry in reset-names.
 - reset-names: Must include the following entries:
@@ -62,6 +63,10 @@ For Tegra186:
 - vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
 - vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V.
 
+For Tegra194:
+- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply
+  3.3 V.
+- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
 
 Pad nodes:
 ==========
@@ -154,6 +159,11 @@ For Tegra210, the list of valid PHY nodes is given below:
 - sata: sata-0
   - functions: "usb3-ss", "sata"
 
+For Tegra194, the list of valid PHY nodes is given below:
+- usb2: usb2-0, usb2-1, usb2-2, usb2-3
+  - functions: "xusb"
+- usb3: usb3-0, usb3-1, usb3-2, usb3-3
+  - functions: "xusb"
 
 Port nodes:
 ===========
@@ -174,6 +184,12 @@ Required properties:
   - "device": for USB device mode
   - "otg": for USB OTG mode
 
+Required properties for OTG/Peripheral capable USB2 ports:
+- usb-role-switch: Boolean property to indicate that the port support OTG or
+  peripheral mode. If present, the port supports switching between USB host
+  and peripheral roles. Connector should be added as subnode.
+  See usb/usb-conn-gpio.txt.
+
 Optional properties:
 - nvidia,internal: A boolean property whose presence determines that a port
   is internal. In the absence of this property the port is considered to be
@@ -221,6 +237,11 @@ Optional properties:
   is internal. In the absence of this property the port is considered to be
   external.
 
+- maximum-speed: Only for Tegra194. A string property that specifies maximum
+  supported speed of a usb3 port. Valid values are:
+  - "super-speed-plus": default, the usb3 port supports USB 3.1 Gen 2 speed.
+  - "super-speed": the usb3 port supports USB 3.1 Gen 1 speed only.
+
 For Tegra124 and Tegra132, the XUSB pad controller exposes the following
 ports:
 - 3x USB2: usb2-0, usb2-1, usb2-2
@@ -233,6 +254,9 @@ For Tegra210, the XUSB pad controller exposes the following ports:
 - 2x HSIC: hsic-0, hsic-1
 - 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3
 
+For Tegra194, the XUSB pad controller exposes the following ports:
+- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3
+- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3
 
 Examples:
 =========

Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree binding for NVIDIA Tegra XUSB device mode controller (XUDC)
+
+description:
+  The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and
+  USB 3.0 SuperSpeed protocols.
+
+maintainers:
+  - Nagarjuna Kristam <nkristam@nvidia.com>
+  - JC Kuo <jckuo@nvidia.com>
+  - Thierry Reding <treding@nvidia.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nvidia,tegra210-xudc # For Tegra210
+          - nvidia,tegra186-xudc # For Tegra186
+
+  reg:
+    minItems: 2
+    maxItems: 3
+    items:
+      - description: XUSB device controller registers
+      - description: XUSB device PCI Config registers
+      - description: XUSB device registers.
+
+  reg-names:
+    minItems: 2
+    maxItems: 3
+    items:
+      - const: base
+      - const: fpci
+      - const: ipfs
+
+  interrupts:
+    maxItems: 1
+    description: Must contain the XUSB device interrupt.
+
+  clocks:
+    minItems: 4
+    maxItems: 5
+    items:
+      - description: Clock to enable core XUSB dev clock.
+      - description: Clock to enable XUSB super speed clock.
+      - description: Clock to enable XUSB super speed dev clock.
+      - description: Clock to enable XUSB high speed dev clock.
+      - description: Clock to enable XUSB full speed dev clock.
+
+  clock-names:
+    minItems: 4
+    maxItems: 5
+    items:
+     - const: dev
+     - const: ss
+     - const: ss_src
+     - const: fs_src
+     - const: hs_src
+
+  power-domains:
+    maxItems: 2
+    items:
+      - description: XUSBB(device) power-domain
+      - description: XUSBA(superspeed) power-domain
+
+  power-domain-names:
+    maxItems: 2
+    items:
+      - const: dev
+      - const: ss
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      phandle to the XUSB pad controller that is used to configure the USB pads
+      used by the XUDC controller.
+
+  phys:
+    minItems: 1
+    description:
+      Must contain an entry for each entry in phy-names.
+      See ../phy/phy-bindings.txt for details.
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: usb2-0
+      - const: usb2-1
+      - const: usb2-2
+      - const: usb2-3
+      - const: usb3-0
+      - const: usb3-1
+      - const: usb3-2
+      - const: usb3-3
+
+  avddio-usb-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  hvdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - nvidia,xusb-padctl
+  - phys
+  - phy-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra210-xudc
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+        clocks:
+          minItems: 5
+        clock-names:
+          minItems: 5
+      required:
+        - avddio-usb-supply
+        - hvdd-usb-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-xudc
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          maxItems: 2
+        clocks:
+          maxItems: 4
+        clock-names:
+          maxItems: 4
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@700d0000 {
+        compatible = "nvidia,tegra210-xudc";
+        reg = <0x0 0x700d0000 0x0 0x8000>,
+              <0x0 0x700d8000 0x0 0x1000>,
+              <0x0 0x700d9000 0x0 0x1000>;
+        reg-names = "base", "fpci", "ipfs";
+
+        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>;
+        clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src";
+
+        power-domains = <&pd_xusbdev>, <&pd_xusbss>;
+        power-domain-names = "dev", "ss";
+
+        nvidia,xusb-padctl = <&padctl>;
+
+        phys = <&micro_b>;
+        phy-names = "usb2-0";
+
+        avddio-usb-supply = <&vdd_pex_1v05>;
+        hvdd-usb-supply = <&vdd_3v3_sys>;
+    };

include/dt-bindings/clock/tegra114-car.h

@@ -228,6 +228,8 @@
 #define TEGRA114_CLK_CLK_M 201
 #define TEGRA114_CLK_CLK_M_DIV2 202
 #define TEGRA114_CLK_CLK_M_DIV4 203
+#define TEGRA114_CLK_OSC_DIV2 202
+#define TEGRA114_CLK_OSC_DIV4 203
 #define TEGRA114_CLK_PLL_REF 204
 #define TEGRA114_CLK_PLL_C 205
 #define TEGRA114_CLK_PLL_C_OUT1 206
@@ -274,7 +276,7 @@
 #define TEGRA114_CLK_CLK_OUT_2 246
 #define TEGRA114_CLK_CLK_OUT_3 247
 #define TEGRA114_CLK_BLINK 248
-/* 249 */
+#define TEGRA114_CLK_OSC 249
 /* 250 */
 /* 251 */
 #define TEGRA114_CLK_XUSB_HOST_SRC 252

include/dt-bindings/clock/tegra124-car-common.h

@@ -227,6 +227,8 @@
 #define TEGRA124_CLK_CLK_M 201
 #define TEGRA124_CLK_CLK_M_DIV2 202
 #define TEGRA124_CLK_CLK_M_DIV4 203
+#define TEGRA124_CLK_OSC_DIV2 202
+#define TEGRA124_CLK_OSC_DIV4 203
 #define TEGRA124_CLK_PLL_REF 204
 #define TEGRA124_CLK_PLL_C 205
 #define TEGRA124_CLK_PLL_C_OUT1 206
@@ -273,7 +275,7 @@
 #define TEGRA124_CLK_CLK_OUT_2 246
 #define TEGRA124_CLK_CLK_OUT_3 247
 #define TEGRA124_CLK_BLINK 248
-/* 249 */
+#define TEGRA124_CLK_OSC 249
 /* 250 */
 /* 251 */
 #define TEGRA124_CLK_XUSB_HOST_SRC 252

include/dt-bindings/clock/tegra210-car.h

@@ -262,6 +262,8 @@
 #define TEGRA210_CLK_CLK_M 233
 #define TEGRA210_CLK_CLK_M_DIV2 234
 #define TEGRA210_CLK_CLK_M_DIV4 235
+#define TEGRA210_CLK_OSC_DIV2 234
+#define TEGRA210_CLK_OSC_DIV4 235
 #define TEGRA210_CLK_PLL_REF 236
 #define TEGRA210_CLK_PLL_C 237
 #define TEGRA210_CLK_PLL_C_OUT1 238
@@ -355,7 +357,7 @@
 #define TEGRA210_CLK_PLL_A_OUT_ADSP 323
 #define TEGRA210_CLK_PLL_A_OUT0_OUT_ADSP 324
 /* 325 */
-/* 326 */
+#define TEGRA210_CLK_OSC 326
 /* 327 */
 /* 328 */
 /* 329 */

include/dt-bindings/clock/tegra30-car.h

@@ -196,6 +196,8 @@
 #define TEGRA30_CLK_CLK_M 171
 #define TEGRA30_CLK_CLK_M_DIV2 172
 #define TEGRA30_CLK_CLK_M_DIV4 173
+#define TEGRA30_CLK_OSC_DIV2 172
+#define TEGRA30_CLK_OSC_DIV4 173
 #define TEGRA30_CLK_PLL_REF 174
 #define TEGRA30_CLK_PLL_C 175
 #define TEGRA30_CLK_PLL_C_OUT1 176
@@ -243,7 +245,7 @@
 #define TEGRA30_CLK_HCLK 217
 #define TEGRA30_CLK_PCLK 218
 /* 219 */
-/* 220 */
+#define TEGRA30_CLK_OSC 220
 /* 221 */
 /* 222 */
 /* 223 */

include/dt-bindings/soc/tegra-pmc.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2019-2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_SOC_TEGRA_PMC_H
+#define _DT_BINDINGS_SOC_TEGRA_PMC_H
+
+#define TEGRA_PMC_CLK_OUT_1		0
+#define TEGRA_PMC_CLK_OUT_2		1
+#define TEGRA_PMC_CLK_OUT_3		2
+#define TEGRA_PMC_CLK_BLINK		3
+
+#define TEGRA_PMC_CLK_MAX		4
+
+#endif	/* _DT_BINDINGS_SOC_TEGRA_PMC_H */

include/soc/tegra/pmc.h

@@ -113,8 +113,9 @@ enum tegra_io_pad {
 	TEGRA_IO_PAD_PEX_CLK_BIAS,
 	TEGRA_IO_PAD_PEX_CLK1,
 	TEGRA_IO_PAD_PEX_CLK2,
-	TEGRA_IO_PAD_PEX_CLK2_BIAS,
 	TEGRA_IO_PAD_PEX_CLK3,
+	TEGRA_IO_PAD_PEX_CLK_2_BIAS,
+	TEGRA_IO_PAD_PEX_CLK_2,
 	TEGRA_IO_PAD_PEX_CNTRL,
 	TEGRA_IO_PAD_PEX_CTL2,
 	TEGRA_IO_PAD_PEX_L0_RST_N,