ARM: dts: keystone-k2g: add MMC0 and MMC1 nodes

Add device tree nodes for MMC0 and MMC1 pesent
on 66AK2G device.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[nsekhar@ti.com: fix clock-names for mmc1 node]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

arch/arm/boot/dts/keystone-k2g.dtsi

@@ -276,5 +276,37 @@ edma1_tptc1: tptc@027b8000 {
 			reg =	<0x027b8000 0x400>;
 			power-domains = <&k2g_pds 0x4f>;
 		};
+
+		mmc0: mmc@23000000 {
+			compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
+			reg = <0x23000000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
+			dmas = <&edma1 24 0>, <&edma1 25 0>;
+			dma-names = "tx", "rx";
+			bus-width = <4>;
+			ti,needs-special-reset;
+			no-1-8-v;
+			max-frequency = <96000000>;
+			power-domains = <&k2g_pds 0xb>;
+			clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
+			clock-names = "fck", "mmchsdb_fck";
+			status = "disabled";
+		};
+
+		mmc1: mmc@23100000 {
+			compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
+			reg = <0x23100000 0x400>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
+			dmas = <&edma1 26 0>, <&edma1 27 0>;
+			dma-names = "tx", "rx";
+			bus-width = <8>;
+			ti,needs-special-reset;
+			ti,non-removable;
+			max-frequency = <96000000>;
+			power-domains = <&k2g_pds 0xc>;
+			clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
+			clock-names = "fck", "mmchsdb_fck";
+			status = "disabled";
+		};
 	};
 };