Commit 97ace515 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "This is the first set of bugfixes for ARM SoCs, fixing a couple of
  stability problems, mostly on TI OMAP and Rockchips platforms:

   - OMAP2 hwmod clocks must be enabled in the correct order

   - OMAP3 Wakeup from resume through PRM IRQ was unreliable

   - one regression on OMAP5 caused by a kexec fix

   - Rockchip ethernet needs some settings for stable operation on
     Rock64

   - Rockchip based Chrombook Plus needs another clock setting for
     stable display suspend/resume

   - Rockchip based phyCORE-RK3288 was able to run at an invalid CPU
     clock frequency

   - Rockchip MMC link was sometimes unreliable

   - multiple fixes to avoid crashes in the Broadcom STB DPFE driver

  Other minor changes include:

   - Devicetree fixes for incorrect hardware description (rockchip,
     omap, Gemini, amlogic)

   - some MAINTAINER file updates to correct email and git addresses

   - some fixes addressing 'make W=1' dtc warnings (broadcom, amlogic,
     cavium, qualcomm, hisilicon, zx)

   - fixes for LTO-compilation (orion, davinci, clps711x)

   - one fix for an incorrect Kconfig errata selection

   - a memory leak in the OMAP timer driver

   - a kernel data leak in OMAP1 debugfs files"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  MAINTAINERS: update entries for ARM/STM32
  ARM: dts: bcm283x: Move arm-pmu out of soc node
  ARM: dts: bcm283x: Fix unit address of local_intc
  ARM: dts: NSP: Fix amount of RAM on BCM958625HR
  ARM: dts: Set D-Link DNS-313 SATA to muxmode 0
  ARM: omap2: set CONFIG_LIRC=y in defconfig
  ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS
  memory: brcmstb: dpfe: support new way of passing data from the DCPU
  memory: brcmstb: dpfe: fix type declaration of variable "ret"
  memory: brcmstb: dpfe: properly mask vendor error bits
  ARM: BCM: dts: Remove leading 0x and 0s from bindings notation
  ARM: orion: fix orion_ge00_switch_board_info initialization
  ARM: davinci: mark spi_board_info arrays as const
  ARM: clps711x: mark clps711x_compat as const
  arm: zx: dts: Remove leading 0x and 0s from bindings notation
  arm64: dts: Remove leading 0x and 0s from bindings notation
  arm64: dts: cavium: fix PCI bus dtc warnings
  MAINTAINERS: ARM: at91: update my email address
  soc: imx: gpc: de-register power domains only if initialized
  ARM: dts: rockchip: Fix DWMMC clocks
  ...
parents b5e792f1 8f148f32
......@@ -1238,7 +1238,7 @@ F: drivers/clk/at91
ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@microchip.com>
M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
M: Alexandre Belloni <alexandre.belloni@bootlin.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.linux4sam.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
......@@ -1590,7 +1590,7 @@ ARM/Marvell Dove/MV78xx0/Orion SOC support
M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
M: Gregory Clement <gregory.clement@free-electrons.com>
M: Gregory Clement <gregory.clement@bootlin.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/soc/dove/
......@@ -1604,7 +1604,7 @@ F: arch/arm/boot/dts/orion5x*
ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K SOC support
M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
M: Gregory Clement <gregory.clement@free-electrons.com>
M: Gregory Clement <gregory.clement@bootlin.com>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
......@@ -1999,8 +1999,10 @@ M: Maxime Coquelin <mcoquelin.stm32@gmail.com>
M: Alexandre Torgue <alexandre.torgue@st.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git stm32-next
N: stm32
F: arch/arm/boot/dts/stm32*
F: arch/arm/mach-stm32/
F: drivers/clocksource/armv7m_systick.c
ARM/TANGO ARCHITECTURE
......
......@@ -55,7 +55,7 @@ gic: interrupt-controller@3ff00100 {
<0x3ff00100 0x100>;
};
smc@0x3404c000 {
smc@3404c000 {
compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
};
......
......@@ -55,7 +55,7 @@ gic: interrupt-controller@3ff00100 {
<0x3ff00100 0x100>;
};
smc@0x3404e000 {
smc@3404e000 {
compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
};
......
......@@ -18,10 +18,10 @@ cpu@0 {
soc {
ranges = <0x7e000000 0x20000000 0x02000000>;
dma-ranges = <0x40000000 0x00000000 0x20000000>;
};
arm-pmu {
compatible = "arm,arm1176-pmu";
};
arm-pmu {
compatible = "arm,arm1176-pmu";
};
};
......
......@@ -9,19 +9,19 @@ soc {
<0x40000000 0x40000000 0x00001000>;
dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
local_intc: local_intc {
local_intc: local_intc@40000000 {
compatible = "brcm,bcm2836-l1-intc";
reg = <0x40000000 0x100>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&local_intc>;
};
};
arm-pmu {
compatible = "arm,cortex-a7-pmu";
interrupt-parent = <&local_intc>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
};
arm-pmu {
compatible = "arm,cortex-a7-pmu";
interrupt-parent = <&local_intc>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
};
timer {
......
......@@ -8,7 +8,7 @@ soc {
<0x40000000 0x40000000 0x00001000>;
dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
local_intc: local_intc {
local_intc: local_intc@40000000 {
compatible = "brcm,bcm2836-l1-intc";
reg = <0x40000000 0x100>;
interrupt-controller;
......
......@@ -465,7 +465,7 @@ thermal: thermal@7e212000 {
status = "disabled";
};
aux: aux@0x7e215000 {
aux: aux@7e215000 {
compatible = "brcm,bcm2835-aux";
#clock-cells = <1>;
reg = <0x7e215000 0x8>;
......
......@@ -49,7 +49,7 @@ chosen {
memory {
device_type = "memory";
reg = <0x60000000 0x80000000>;
reg = <0x60000000 0x20000000>;
};
gpio-restart {
......
......@@ -269,7 +269,7 @@ conf7 {
sata: sata@46000000 {
/* The ROM uses this muxmode */
cortina,gemini-ata-muxmode = <3>;
cortina,gemini-ata-muxmode = <0>;
cortina,gemini-enable-sata-bridge;
status = "okay";
};
......
......@@ -42,7 +42,7 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6dl.dtsi"
#include "imx6qdl-icore-rqs.dtsi"
/ {
......
......@@ -71,6 +71,8 @@ nand@0,0 {
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <2600000>;
twl: twl@48 {
......@@ -189,7 +191,12 @@ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
>;
};
};
&omap3_pmx_wkup {
......
......@@ -66,6 +66,8 @@ nand@0,0 {
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <2600000>;
twl: twl@48 {
......@@ -136,6 +138,12 @@ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
>;
};
};
&uart2 {
......
......@@ -47,7 +47,7 @@ btn1 {
gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 */
wakeup-source;
autorepeat;
debounce_interval = <50>;
debounce-interval = <50>;
};
};
......
......@@ -280,7 +280,7 @@ sdio: dwmmc@10218000 {
max-frequency = <37500000>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
resets = <&cru SRST_SDIO>;
......@@ -298,7 +298,7 @@ emmc: dwmmc@1021c000 {
max-frequency = <37500000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
default-sample-phase = <158>;
disable-wp;
dmas = <&pdma 12>;
......
......@@ -621,7 +621,7 @@ sdmmc: dwmmc@30000000 {
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
......@@ -634,7 +634,7 @@ sdio: dwmmc@30010000 {
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
pinctrl-names = "default";
pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
......@@ -649,7 +649,7 @@ emmc: dwmmc@30020000 {
max-frequency = <37500000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
bus-width = <8>;
default-sample-phase = <158>;
fifo-depth = <0x100>;
......
......@@ -110,26 +110,6 @@ vdd_misc_1v8: vdd-misc-1v8 {
};
};
&cpu0 {
cpu0-supply = <&vdd_cpu>;
operating-points = <
/* KHz uV */
1800000 1400000
1608000 1350000
1512000 1300000
1416000 1200000
1200000 1100000
1008000 1050000
816000 1000000
696000 950000
600000 900000
408000 900000
312000 900000
216000 900000
126000 900000
>;
};
&emmc {
status = "okay";
bus-width = <8>;
......
......@@ -56,7 +56,7 @@ global_timer: timer@8000200 {
clocks = <&topclk ZX296702_A9_PERIPHCLK>;
};
l2cc: l2-cache-controller@0x00c00000 {
l2cc: l2-cache-controller@c00000 {
compatible = "arm,pl310-cache";
reg = <0x00c00000 0x1000>;
cache-unified;
......@@ -67,30 +67,30 @@ l2cc: l2-cache-controller@0x00c00000 {
arm,double-linefill-incr = <0>;
};
pcu: pcu@0xa0008000 {
pcu: pcu@a0008000 {
compatible = "zte,zx296702-pcu";
reg = <0xa0008000 0x1000>;
};
topclk: topclk@0x09800000 {
topclk: topclk@9800000 {
compatible = "zte,zx296702-topcrm-clk";
reg = <0x09800000 0x1000>;
#clock-cells = <1>;
};
lsp1clk: lsp1clk@0x09400000 {
lsp1clk: lsp1clk@9400000 {
compatible = "zte,zx296702-lsp1crpm-clk";
reg = <0x09400000 0x1000>;
#clock-cells = <1>;
};
lsp0clk: lsp0clk@0x0b000000 {
lsp0clk: lsp0clk@b000000 {
compatible = "zte,zx296702-lsp0crpm-clk";
reg = <0x0b000000 0x1000>;
#clock-cells = <1>;
};
uart0: serial@0x09405000 {
uart0: serial@9405000 {
compatible = "zte,zx296702-uart";
reg = <0x09405000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
......@@ -98,7 +98,7 @@ uart0: serial@0x09405000 {
status = "disabled";
};
uart1: serial@0x09406000 {
uart1: serial@9406000 {
compatible = "zte,zx296702-uart";
reg = <0x09406000 0x1000>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
......@@ -106,7 +106,7 @@ uart1: serial@0x09406000 {
status = "disabled";
};
mmc0: mmc@0x09408000 {
mmc0: mmc@9408000 {
compatible = "snps,dw-mshc";
#address-cells = <1>;
#size-cells = <0>;
......@@ -119,7 +119,7 @@ mmc0: mmc@0x09408000 {
status = "disabled";
};
mmc1: mmc@0x0b003000 {
mmc1: mmc@b003000 {
compatible = "snps,dw-mshc";
#address-cells = <1>;
#size-cells = <0>;
......@@ -132,7 +132,7 @@ mmc1: mmc@0x0b003000 {
status = "disabled";
};
sysctrl: sysctrl@0xa0007000 {
sysctrl: sysctrl@a0007000 {
compatible = "zte,sysctrl", "syscon";
reg = <0xa0007000 0x1000>;
};
......
......@@ -319,7 +319,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_RC_CORE=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_LIRC=m
CONFIG_LIRC=y
CONFIG_RC_DEVICES=y
CONFIG_IR_RX51=m
CONFIG_V4L_PLATFORM_DRIVERS=y
......
......@@ -69,7 +69,7 @@ static void clps711x_restart(enum reboot_mode mode, const char *cmd)
soft_restart(0);
}
static const char *clps711x_compat[] __initconst = {
static const char *const clps711x_compat[] __initconst = {
"cirrus,ep7209",
NULL
};
......
......@@ -368,7 +368,7 @@ static struct spi_eeprom at25640a = {
.flags = EE_ADDR2,
};
static struct spi_board_info dm355_evm_spi_info[] __initconst = {
static const struct spi_board_info dm355_evm_spi_info[] __initconst = {
{
.modalias = "at25",
.platform_data = &at25640a,
......
......@@ -217,7 +217,7 @@ static struct spi_eeprom at25640a = {
.flags = EE_ADDR2,
};
static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
static const struct spi_board_info dm355_leopard_spi_info[] __initconst = {
{
.modalias = "at25",
.platform_data = &at25640a,
......
......@@ -726,7 +726,7 @@ static struct spi_eeprom at25640 = {
.flags = EE_ADDR2,
};
static struct spi_board_info dm365_evm_spi_info[] __initconst = {
static const struct spi_board_info dm365_evm_spi_info[] __initconst = {
{
.modalias = "at25",
.platform_data = &at25640,
......
......@@ -41,7 +41,7 @@ config MACH_ARMADA_375
depends on ARCH_MULTI_V7
select ARMADA_370_XP_IRQ
select ARM_ERRATA_720789
select ARM_ERRATA_753970
select PL310_ERRATA_753970
select ARM_GIC
select ARMADA_375_CLK
select HAVE_ARM_SCU
......@@ -57,7 +57,7 @@ config MACH_ARMADA_38X
bool "Marvell Armada 380/385 boards"
depends on ARCH_MULTI_V7
select ARM_ERRATA_720789
select ARM_ERRATA_753970
select PL310_ERRATA_753970
select ARM_GIC
select ARM_GLOBAL_TIMER
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
......
......@@ -1011,17 +1011,17 @@ static int clk_debugfs_register_one(struct clk *c)
return -ENOMEM;
c->dent = d;
d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
d = debugfs_create_u8("usecount", S_IRUGO, c->dent, &c->usecount);
if (!d) {
err = -ENOMEM;
goto err_out;
}
d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
d = debugfs_create_ulong("rate", S_IRUGO, c->dent, &c->rate);
if (!d) {
err = -ENOMEM;
goto err_out;
}
d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
d = debugfs_create_x8("flags", S_IRUGO, c->dent, &c->flags);
if (!d) {
err = -ENOMEM;
goto err_out;
......
......@@ -299,8 +299,6 @@ static void irq_save_context(void)
if (soc_is_dra7xx())
return;
if (!sar_base)
sar_base = omap4_get_sar_ram_base();
if (wakeupgen_ops && wakeupgen_ops->save_context)
wakeupgen_ops->save_context();
}
......@@ -598,6 +596,8 @@ static int __init wakeupgen_init(struct device_node *node,
irq_hotplug_init();
irq_pm_init();
sar_base = omap4_get_sar_ram_base();
return 0;
}
IRQCHIP_DECLARE(ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);
......@@ -977,6 +977,9 @@ static int _enable_clocks(struct omap_hwmod *oh)
pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
_enable_optional_clocks(oh);
if (oh->_clk)
clk_enable(oh->_clk);
......@@ -985,9 +988,6 @@ static int _enable_clocks(struct omap_hwmod *oh)
clk_enable(os->_clk);
}
if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
_enable_optional_clocks(oh);
/* The opt clocks are controlled by the device driver. */
return 0;
......
......@@ -186,7 +186,7 @@ static void omap_pm_end(void)
cpu_idle_poll_ctrl(false);
}
static void omap_pm_finish(void)
static void omap_pm_wake(void)
{
if (soc_is_omap34xx())
omap_prcm_irq_complete();
......@@ -196,7 +196,7 @@ static const struct platform_suspend_ops omap_pm_ops = {
.begin = omap_pm_begin,
.end = omap_pm_end,
.enter = omap_pm_enter,
.finish = omap_pm_finish,
.wake = omap_pm_wake,
.valid = suspend_valid_only_mem,
};
......
......@@ -156,12 +156,6 @@ static struct clock_event_device clockevent_gpt = {
.tick_resume = omap2_gp_timer_shutdown,
};
static struct property device_disabled = {
.name = "status",
.length = sizeof("disabled"),
.value = "disabled",
};
static const struct of_device_id omap_timer_match[] __initconst = {
{ .compatible = "ti,omap2420-timer", },
{ .compatible = "ti,omap3430-timer", },
......@@ -203,8 +197,17 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id *
of_get_property(np, "ti,timer-secure", NULL)))
continue;
if (!of_device_is_compatible(np, "ti,omap-counter32k"))
of_add_property(np, &device_disabled);
if (!of_device_is_compatible(np, "ti,omap-counter32k")) {
struct property *prop;
prop = kzalloc(sizeof(*prop), GFP_KERNEL);
if (!prop)
return NULL;
prop->name = "status";
prop->value = "disabled";
prop->length = strlen(prop->value);
of_add_property(np, prop);
}
return np;
}
......
......@@ -472,28 +472,27 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
/*****************************************************************************
* Ethernet switch
****************************************************************************/
static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii";
static __initdata struct mdio_board_info
orion_ge00_switch_board_info;
static __initdata struct mdio_board_info orion_ge00_switch_board_info = {
.bus_id = "orion-mii",
.modalias = "mv88e6085",
};
void __init orion_ge00_switch_init(struct dsa_chip_data *d)
{
struct mdio_board_info *bd;
unsigned int i;
if (!IS_BUILTIN(CONFIG_PHYLIB))
return;
for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
if (!strcmp(d->port_names[i], "cpu"))
for (i = 0; i < ARRAY_SIZE(d->port_names); i++) {
if (!strcmp(d->port_names[i], "cpu")) {
d->netdev[i] = &orion_ge00.dev;
break;
}
}
bd = &orion_ge00_switch_board_info;
bd->bus_id = orion_ge00_mvmdio_bus_name;
bd->mdio_addr = d->sw_addr;
d->netdev[i] = &orion_ge00.dev;
strcpy(bd->modalias, "mv88e6085");
bd->platform_data = d;
orion_ge00_switch_board_info.mdio_addr = d->sw_addr;
orion_ge00_switch_board_info.platform_data = d;
mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
}
......
......@@ -165,14 +165,14 @@ spicc1: spi@15000 {
uart_A: serial@24000 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
reg = <0x0 0x24000 0x0 0x14>;
reg = <0x0 0x24000 0x0 0x18>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
uart_B: serial@23000 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
reg = <0x0 0x23000 0x0 0x14>;
reg = <0x0 0x23000 0x0 0x18>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
......
......@@ -235,14 +235,14 @@ reset: reset-controller@4404 {
uart_A: serial@84c0 {
compatible = "amlogic,meson-gx-uart";
reg = <0x0 0x84c0 0x0 0x14>;
reg = <0x0 0x84c0 0x0 0x18>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
uart_B: serial@84dc {
compatible = "amlogic,meson-gx-uart";
reg = <0x0 0x84dc 0x0 0x14>;
reg = <0x0 0x84dc 0x0 0x18>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
......@@ -287,7 +287,7 @@ pwm_ef: pwm@86c0 {
uart_C: serial@8700 {
compatible = "amlogic,meson-gx-uart";
reg = <0x0 0x8700 0x0 0x14>;
reg = <0x0 0x8700 0x0 0x18>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
......@@ -404,14 +404,14 @@ sec_AO: ao-secure@140 {
uart_AO: serial@4c0 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x004c0 0x0 0x14>;
reg = <0x0 0x004c0 0x0 0x18>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
uart_AO_B: serial@4e0 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x004e0 0x0 0x14>;
reg = <0x0 0x004e0 0x0 0x18>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
......
......@@ -631,6 +631,7 @@ internal_mdio: mdio@e40908ff {
internal_phy: ethernet-phy@8 {
compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22";
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <8>;
max-speed = <100>;
};
......
......@@ -98,7 +98,7 @@ clk125mhz: uart_clk125mhz {
clock-output-names = "clk125mhz";
};
pci {
pcie@30000000 {
compatible = "pci-host-ecam-generic";
device_type = "pci";
#interrupt-cells = <1>;
......@@ -118,6 +118,7 @@ pci {
ranges =
<0x02000000 0 0x40000000 0 0x40000000 0 0x20000000
0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
bus-range = <0 0xff>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map =
/* addr pin ic icaddr icintr */
......
......@@ -51,7 +51,7 @@ reserved-memory {
#size-cells = <2>;
ranges;
ramoops@0x21f00000 {
ramoops@21f00000 {
compatible = "ramoops";
reg = <0x0 0x21f00000 0x0 0x00100000>;
record-size = <0x00020000>;
......
......@@ -341,7 +341,7 @@ syscfg_pctl_a: syscfg_pctl_a@10005000 {
reg = <0 0x10005000 0 0x1000>;
};
pio: pinctrl@0x10005000 {
pio: pinctrl@10005000 {
compatible = "mediatek,mt8173-pinctrl";
reg = <0 0x1000b000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl_a>;
......
......@@ -140,16 +140,16 @@ usb2_id: usb2-id {
};
agnoc@0 {
qcom,pcie@00600000 {
qcom,pcie@600000 {
perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
};
qcom,pcie@00608000 {
qcom,pcie@608000 {
status = "okay";
perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
};
qcom,pcie@00610000 {
qcom,pcie@610000 {
status = "okay";
perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
};
......
......@@ -840,7 +840,7 @@ agnoc@0 {
#size-cells = <1>;
ranges;
pcie0: qcom,pcie@00600000 {
pcie0: qcom,pcie@600000 {
compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
status = "disabled";
power-domains = <&gcc PCIE0_GDSC>;
......@@ -893,7 +893,7 @@ pcie0: qcom,pcie@00600000 {
};
pcie1: qcom,pcie@00608000 {
pcie1: qcom,pcie@608000 {
compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
power-domains = <&gcc PCIE1_GDSC>;
bus-range = <0x00 0xff>;
......@@ -946,7 +946,7 @@ pcie1: qcom,pcie@00608000 {
"bus_slave";
};
pcie2: qcom,pcie@00610000 {
pcie2: qcom,pcie@610000 {
compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
power-domains = <&gcc PCIE2_GDSC>;
bus-range = <0x00 0xff>;
......
......@@ -132,17 +132,16 @@ &gmac2io {
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
clock_in_out = "input";
/* shows instability at 1GBit right now */
max-speed = <100>;
phy-supply = <&vcc_io>;
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&rgmiim1_pins>;
snps,force_thresh_dma_mode;
snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 50000>;
tx_delay = <0x26>;
rx_delay = <0x11>;
tx_delay = <0x24>;
rx_delay = <0x18>;
status = "okay";
};
......
......@@ -730,7 +730,7 @@ sdmmc: dwmmc@ff500000 {
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
status = "disabled";
};
......@@ -741,7 +741,7 @@ sdio: dwmmc@ff510000 {
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
status = "disabled";
};
......@@ -752,7 +752,7 @@ emmc: dwmmc@ff520000 {
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
status = "disabled";
};
......
......@@ -257,7 +257,7 @@ sdio0: dwmmc@ff0d0000 {
max-frequency = <150000000>;
clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
<&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
resets = <&cru SRST_SDIO0>;
......
......@@ -457,7 +457,7 @@ &pcie0 {
assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
assigned-clock-rates = <100000000>;
ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_clkreqn_cpm>;
......
......@@ -1739,8 +1739,8 @@ edp: edp@ff970000 {
compatible = "rockchip,rk3399-edp";
reg = <0x0 0xff970000 0x0 0x8000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>;
clock-names = "dp", "pclk";
clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>;
clock-names = "dp", "pclk", "grf";
pinctrl-names = "default";
pinctrl-0 = <&edp_hpd>;
power-domains = <&power RK3399_PD_EDP>;
......
......@@ -630,7 +630,7 @@ static int sysc_init_dts_quirks(struct sysc *ddata)
for (i = 0; i < ARRAY_SIZE(sysc_dts_quirks); i++) {
prop = of_get_property(np, sysc_dts_quirks[i].name, &len);
if (!prop)
break;
continue;
ddata->cfg.quirks |= sysc_dts_quirks[i].mask;
}
......
......@@ -45,8 +45,16 @@
#define REG_TO_DCPU_MBOX 0x10
#define REG_TO_HOST_MBOX 0x14
/* Macros to process offsets returned by the DCPU */
#define DRAM_MSG_ADDR_OFFSET 0x0
#define DRAM_MSG_TYPE_OFFSET 0x1c
#define DRAM_MSG_ADDR_MASK ((1UL << DRAM_MSG_TYPE_OFFSET) - 1)
#define DRAM_MSG_TYPE_MASK ((1UL << \
(BITS_PER_LONG - DRAM_MSG_TYPE_OFFSET)) - 1)
/* Message RAM */
#define DCPU_MSG_RAM(x) (0x100 + (x) * sizeof(u32))
#define DCPU_MSG_RAM_START 0x100
#define DCPU_MSG_RAM(x) (DCPU_MSG_RAM_START + (x) * sizeof(u32))
/* DRAM Info Offsets & Masks */
#define DRAM_INFO_INTERVAL 0x0
......@@ -255,6 +263,40 @@ static unsigned int get_msg_chksum(const u32 msg[])
return sum;
}
static void __iomem *get_msg_ptr(struct private_data *priv, u32 response,
char *buf, ssize_t *size)
{
unsigned int msg_type;
unsigned int offset;
void __iomem *ptr = NULL;
msg_type = (response >> DRAM_MSG_TYPE_OFFSET) & DRAM_MSG_TYPE_MASK;
offset = (response >> DRAM_MSG_ADDR_OFFSET) & DRAM_MSG_ADDR_MASK;
/*
* msg_type == 1: the offset is relative to the message RAM
* msg_type == 0: the offset is relative to the data RAM (this is the
* previous way of passing data)
* msg_type is anything else: there's critical hardware problem
*/
switch (msg_type) {
case 1:
ptr = priv->regs + DCPU_MSG_RAM_START + offset;
break;
case 0:
ptr = priv->dmem + offset;
break;
default:
dev_emerg(priv->dev, "invalid message reply from DCPU: %#x\n",
response);
if (buf && size)
*size = sprintf(buf,
"FATAL: communication error with DCPU\n");
}
return ptr;
}
static int __send_command(struct private_data *priv, unsigned int cmd,
u32 result[])
{
......@@ -507,7 +549,7 @@ static ssize_t show_info(struct device *dev, struct device_attribute *devattr,
{
u32 response[MSG_FIELD_MAX];
unsigned int info;
int ret;
ssize_t ret;
ret = generic_show(DPFE_CMD_GET_INFO, response, dev, buf);
if (ret)
......@@ -528,18 +570,19 @@ static ssize_t show_refresh(struct device *dev,
u32 response[MSG_FIELD_MAX];
void __iomem *info;
struct private_data *priv;
unsigned int offset;
u8 refresh, sr_abort, ppre, thermal_offs, tuf;
u32 mr4;
int ret;
ssize_t ret;
ret = generic_show(DPFE_CMD_GET_REFRESH, response, dev, buf);
if (ret)
return ret;
priv = dev_get_drvdata(dev);
offset = response[MSG_ARG0];
info = priv->dmem + offset;
info = get_msg_ptr(priv, response[MSG_ARG0], buf, &ret);
if (!info)
return ret;
mr4 = readl_relaxed(info + DRAM_INFO_MR4) & DRAM_INFO_MR4_MASK;
......@@ -561,7 +604,6 @@ static ssize_t store_refresh(struct device *dev, struct device_attribute *attr,
u32 response[MSG_FIELD_MAX];
struct private_data *priv;
void __iomem *info;
unsigned int offset;
unsigned long val;
int ret;
......@@ -574,8 +616,10 @@ static ssize_t store_refresh(struct device *dev, struct device_attribute *attr,
if (ret)
return ret;
offset = response[MSG_ARG0];
info = priv->dmem + offset;
info = get_msg_ptr(priv, response[MSG_ARG0], NULL, NULL);
if (!info)
return -EIO;
writel_relaxed(val, info + DRAM_INFO_INTERVAL);
return count;
......@@ -587,23 +631,25 @@ static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,
u32 response[MSG_FIELD_MAX];
struct private_data *priv;
void __iomem *info;
unsigned int offset;
int ret;
ssize_t ret;
ret = generic_show(DPFE_CMD_GET_VENDOR, response, dev, buf);
if (ret)
return ret;
offset = response[MSG_ARG0];
priv = dev_get_drvdata(dev);
info = priv->dmem + offset;
info = get_msg_ptr(priv, response[MSG_ARG0], buf, &ret);
if (!info)
return ret;
return sprintf(buf, "%#x %#x %#x %#x %#x\n",
readl_relaxed(info + DRAM_VENDOR_MR5) & DRAM_VENDOR_MASK,
readl_relaxed(info + DRAM_VENDOR_MR6) & DRAM_VENDOR_MASK,
readl_relaxed(info + DRAM_VENDOR_MR7) & DRAM_VENDOR_MASK,
readl_relaxed(info + DRAM_VENDOR_MR8) & DRAM_VENDOR_MASK,
readl_relaxed(info + DRAM_VENDOR_ERROR));
readl_relaxed(info + DRAM_VENDOR_ERROR) &
DRAM_VENDOR_MASK);
}
static int brcmstb_dpfe_resume(struct platform_device *pdev)
......
......@@ -470,13 +470,21 @@ static int imx_gpc_probe(struct platform_device *pdev)
static int imx_gpc_remove(struct platform_device *pdev)
{
struct device_node *pgc_node;
int ret;
pgc_node = of_get_child_by_name(pdev->dev.of_node, "pgc");
/* bail out if DT too old and doesn't provide the necessary info */
if (!of_property_read_bool(pdev->dev.of_node, "#power-domain-cells") &&
!pgc_node)
return 0;
/*
* If the old DT binding is used the toplevel driver needs to
* de-register the power domains
*/
if (!of_get_child_by_name(pdev->dev.of_node, "pgc")) {
if (!pgc_node) {
of_genpd_del_provider(pdev->dev.of_node);
ret = pm_genpd_remove(&imx_gpc_domains[GPC_PGC_DOMAIN_PU].base);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment