OMAP3: PM: Adding smartreflex driver support.

SmartReflex modules do adaptive voltage control for real-time
voltage adjustments. With Smartreflex the power supply voltage
can be adapted to the silicon performance(manufacturing process,
temperature induced performance, age induced performance etc).

There are differnet classes of smartreflex implementation.
	Class-0: Manufacturing Test Calibration
	Class-1: Boot-Time Software Calibration
	Class-2: Continuous Software Calibration
	Class-3: Continuous Hardware Calibration
	Class-4: Fully Integrated Power Management

OMAP3 has two smartreflex modules one associated with VDD MPU and the
other associated with VDD CORE.
This patch adds support for  smartreflex driver. The driver is designed
for Class-1 , Class-2 and Class-3 support and is  a platform driver.
Smartreflex driver can be enabled through a Kconfig option
"SmartReflex support" under "System type"->"TI OMAP implementations" menu.

Smartreflex autocompensation feature can be enabled runtime through
a debug fs option.
To enable smartreflex autocompensation feature
	echo 1 > /debug/voltage/vdd_<X>/smartreflex/autocomp
To disable smartreflex autocompensation feature
	echo 0 > /debug/voltage/vdd_<X>/smartreflex/autocomp

where X can be mpu, core , iva etc.

This patch contains code originally in linux omap pm branch.
Major contributors to this driver are
Lesly A M, Rajendra Nayak, Kalle Jokiniemi, Paul Walmsley,
Nishant Menon, Kevin Hilman.
Signed-off-by: Thara Gopinath <thara@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

arch/arm/mach-omap2/Makefile

@@ -62,6 +62,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o voltage.o \
 					   cpuidle34xx.o pm_bus.o
 obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o pm_bus.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
+obj-$(CONFIG_OMAP_SMARTREFLEX)          += smartreflex.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a

arch/arm/plat-omap/Kconfig

@@ -35,6 +35,28 @@ config OMAP_DEBUG_LEDS
 	depends on OMAP_DEBUG_DEVICES
 	default y if LEDS_CLASS
 
+config OMAP_SMARTREFLEX
+	bool "SmartReflex support"
+	depends on ARCH_OMAP3 && PM
+	help
+	  Say Y if you want to enable SmartReflex.
+
+	  SmartReflex can perform continuous dynamic voltage
+	  scaling around the nominal operating point voltage
+	  according to silicon characteristics and operating
+	  conditions. Enabling SmartReflex reduces power
+	  consumption.
+
+	  Please note, that by default SmartReflex is only
+	  initialized. To enable the automatic voltage
+	  compensation for vdd mpu  and vdd core from user space,
+	  user must write 1 to
+		/debug/voltage/vdd_<X>/smartreflex/autocomp,
+	  where X is mpu or core for OMAP3.
+	  Optionallly autocompensation can be enabled in the kernel
+	  by default during system init via the enable_on_init flag
+	  which an be passed as platform data to the smartreflex driver.
+
 config OMAP_RESET_CLOCKS
 	bool "Reset unused clocks during boot"
 	depends on ARCH_OMAP

arch/arm/plat-omap/include/plat/smartreflex.h

+/*
+ * OMAP Smartreflex Defines and Routines
+ *
+ * Author: Thara Gopinath	<thara@ti.com>
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H
+#define __ASM_ARM_OMAP_SMARTREFLEX_H
+
+#include <linux/platform_device.h>
+#include <plat/voltage.h>
+
+/*
+ * Different Smartreflex IPs version. The v1 is the 65nm version used in
+ * OMAP3430. The v2 is the update for the 45nm version of the IP
+ * used in OMAP3630 and OMAP4430
+ */
+#define SR_TYPE_V1	1
+#define SR_TYPE_V2	2
+
+/* SMART REFLEX REG ADDRESS OFFSET */
+#define SRCONFIG		0x00
+#define SRSTATUS		0x04
+#define SENVAL			0x08
+#define SENMIN			0x0C
+#define SENMAX			0x10
+#define SENAVG			0x14
+#define AVGWEIGHT		0x18
+#define NVALUERECIPROCAL	0x1c
+#define SENERROR_V1		0x20
+#define ERRCONFIG_V1		0x24
+#define IRQ_EOI			0x20
+#define IRQSTATUS_RAW		0x24
+#define IRQSTATUS		0x28
+#define IRQENABLE_SET		0x2C
+#define IRQENABLE_CLR		0x30
+#define SENERROR_V2		0x34
+#define ERRCONFIG_V2		0x38
+
+/* Bit/Shift Positions */
+
+/* SRCONFIG */
+#define SRCONFIG_ACCUMDATA_SHIFT	22
+#define SRCONFIG_SRCLKLENGTH_SHIFT	12
+#define SRCONFIG_SENNENABLE_V1_SHIFT	5
+#define SRCONFIG_SENPENABLE_V1_SHIFT	3
+#define SRCONFIG_SENNENABLE_V2_SHIFT	1
+#define SRCONFIG_SENPENABLE_V2_SHIFT	0
+#define SRCONFIG_CLKCTRL_SHIFT		0
+
+#define SRCONFIG_ACCUMDATA_MASK		(0x3ff << 22)
+
+#define SRCONFIG_SRENABLE		BIT(11)
+#define SRCONFIG_SENENABLE		BIT(10)
+#define SRCONFIG_ERRGEN_EN		BIT(9)
+#define SRCONFIG_MINMAXAVG_EN		BIT(8)
+#define SRCONFIG_DELAYCTRL		BIT(2)
+
+/* AVGWEIGHT */
+#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT	2
+#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT	0
+
+/* NVALUERECIPROCAL */
+#define NVALUERECIPROCAL_SENPGAIN_SHIFT	20
+#define NVALUERECIPROCAL_SENNGAIN_SHIFT	16
+#define NVALUERECIPROCAL_RNSENP_SHIFT	8
+#define NVALUERECIPROCAL_RNSENN_SHIFT	0
+
+/* ERRCONFIG */
+#define ERRCONFIG_ERRWEIGHT_SHIFT	16
+#define ERRCONFIG_ERRMAXLIMIT_SHIFT	8
+#define ERRCONFIG_ERRMINLIMIT_SHIFT	0
+
+#define SR_ERRWEIGHT_MASK		(0x07 << 16)
+#define SR_ERRMAXLIMIT_MASK		(0xff << 8)
+#define SR_ERRMINLIMIT_MASK		(0xff << 0)
+
+#define ERRCONFIG_VPBOUNDINTEN_V1	BIT(31)
+#define ERRCONFIG_VPBOUNDINTST_V1	BIT(30)
+#define	ERRCONFIG_MCUACCUMINTEN		BIT(29)
+#define ERRCONFIG_MCUACCUMINTST		BIT(28)
+#define	ERRCONFIG_MCUVALIDINTEN		BIT(27)
+#define ERRCONFIG_MCUVALIDINTST		BIT(26)
+#define ERRCONFIG_MCUBOUNDINTEN		BIT(25)
+#define	ERRCONFIG_MCUBOUNDINTST		BIT(24)
+#define	ERRCONFIG_MCUDISACKINTEN	BIT(23)
+#define ERRCONFIG_VPBOUNDINTST_V2	BIT(23)
+#define ERRCONFIG_MCUDISACKINTST	BIT(22)
+#define ERRCONFIG_VPBOUNDINTEN_V2	BIT(22)
+
+#define ERRCONFIG_STATUS_V1_MASK	(ERRCONFIG_VPBOUNDINTST_V1 | \
+					ERRCONFIG_MCUACCUMINTST | \
+					ERRCONFIG_MCUVALIDINTST | \
+					ERRCONFIG_MCUBOUNDINTST | \
+					ERRCONFIG_MCUDISACKINTST)
+/* IRQSTATUS */
+#define IRQSTATUS_MCUACCUMINT		BIT(3)
+#define IRQSTATUS_MCVALIDINT		BIT(2)
+#define IRQSTATUS_MCBOUNDSINT		BIT(1)
+#define IRQSTATUS_MCUDISABLEACKINT	BIT(0)
+
+/* IRQENABLE_SET and IRQENABLE_CLEAR */
+#define IRQENABLE_MCUACCUMINT		BIT(3)
+#define IRQENABLE_MCUVALIDINT		BIT(2)
+#define IRQENABLE_MCUBOUNDSINT		BIT(1)
+#define IRQENABLE_MCUDISABLEACKINT	BIT(0)
+
+/* Common Bit values */
+
+#define SRCLKLENGTH_12MHZ_SYSCLK	0x3c
+#define SRCLKLENGTH_13MHZ_SYSCLK	0x41
+#define SRCLKLENGTH_19MHZ_SYSCLK	0x60
+#define SRCLKLENGTH_26MHZ_SYSCLK	0x82
+#define SRCLKLENGTH_38MHZ_SYSCLK	0xC0
+
+/*
+ * 3430 specific values. Maybe these should be passed from board file or
+ * pmic structures.
+ */
+#define OMAP3430_SR_ACCUMDATA		0x1f4
+
+#define OMAP3430_SR1_SENPAVGWEIGHT	0x03
+#define OMAP3430_SR1_SENNAVGWEIGHT	0x03
+
+#define OMAP3430_SR2_SENPAVGWEIGHT	0x01
+#define OMAP3430_SR2_SENNAVGWEIGHT	0x01
+
+#define OMAP3430_SR_ERRWEIGHT		0x04
+#define OMAP3430_SR_ERRMAXLIMIT		0x02
+
+/**
+ * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
+ *				pmic specific info to smartreflex driver
+ *
+ * @sr_pmic_init:	API to initialize smartreflex on the PMIC side.
+ */
+struct omap_sr_pmic_data {
+	void (*sr_pmic_init) (void);
+};
+
+#ifdef CONFIG_OMAP_SMARTREFLEX
+/*
+ * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
+ * The smartreflex class driver should pass the class type.
+ * Should be used to populate the class_type field of the
+ * omap_smartreflex_class_data structure.
+ */
+#define SR_CLASS1	0x1
+#define SR_CLASS2	0x2
+#define SR_CLASS3	0x3
+
+/**
+ * struct omap_sr_class_data - Smartreflex class driver info
+ *
+ * @enable:		API to enable a particular class smaartreflex.
+ * @disable:		API to disable a particular class smartreflex.
+ * @configure:		API to configure a particular class smartreflex.
+ * @notify:		API to notify the class driver about an event in SR.
+ *			Not needed for class3.
+ * @notify_flags:	specify the events to be notified to the class driver
+ * @class_type:		specify which smartreflex class.
+ *			Can be used by the SR driver to take any class
+ *			based decisions.
+ */
+struct omap_sr_class_data {
+	int (*enable)(struct voltagedomain *voltdm);
+	int (*disable)(struct voltagedomain *voltdm, int is_volt_reset);
+	int (*configure)(struct voltagedomain *voltdm);
+	int (*notify)(struct voltagedomain *voltdm, u32 status);
+	u8 notify_flags;
+	u8 class_type;
+};
+
+/**
+ * struct omap_sr_nvalue_table	- Smartreflex n-target value info
+ *
+ * @efuse_offs:	The offset of the efuse where n-target values are stored.
+ * @nvalue:	The n-target value.
+ */
+struct omap_sr_nvalue_table {
+	u32 efuse_offs;
+	u32 nvalue;
+};
+
+/**
+ * struct omap_sr_data - Smartreflex platform data.
+ *
+ * @ip_type:		Smartreflex IP type.
+ * @senp_mod:		SENPENABLE value for the sr
+ * @senn_mod:		SENNENABLE value for sr
+ * @nvalue_count:	Number of distinct nvalues in the nvalue table
+ * @enable_on_init:	whether this sr module needs to enabled at
+ *			boot up or not.
+ * @nvalue_table:	table containing the  efuse offsets and nvalues
+ *			corresponding to them.
+ * @voltdm:		Pointer to the voltage domain associated with the SR
+ */
+struct omap_sr_data {
+	int				ip_type;
+	u32				senp_mod;
+	u32				senn_mod;
+	int				nvalue_count;
+	bool				enable_on_init;
+	struct omap_sr_nvalue_table	*nvalue_table;
+	struct voltagedomain		*voltdm;
+};
+
+/* Smartreflex module enable/disable interface */
+void omap_sr_enable(struct voltagedomain *voltdm);
+void omap_sr_disable(struct voltagedomain *voltdm);
+void omap_sr_disable_reset_volt(struct voltagedomain *voltdm);
+
+/* API to register the pmic specific data with the smartreflex driver. */
+void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
+
+/* Smartreflex driver hooks to be called from Smartreflex class driver */
+int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
+void sr_disable(struct voltagedomain *voltdm);
+int sr_configure_errgen(struct voltagedomain *voltdm);
+int sr_configure_minmax(struct voltagedomain *voltdm);
+
+/* API to register the smartreflex class driver with the smartreflex driver */
+int sr_register_class(struct omap_sr_class_data *class_data);
+#else
+static inline void omap_sr_enable(struct voltagedomain *voltdm) {}
+static inline void omap_sr_disable(struct voltagedomain *voltdm) {}
+static inline void omap_sr_disable_reset_volt(
+		struct voltagedomain *voltdm) {}
+static inline void omap_sr_register_pmic(
+		struct omap_sr_pmic_data *pmic_data) {}
+#endif
+#endif