ide: remove 'byte' typedef

Just use u8 instead, also s/__u8/u8/ in ide-cd.h while at it.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/ide-cd.h

@@ -33,33 +33,33 @@
 
 /* Structure of a MSF cdrom address. */
 struct atapi_msf {
-	byte reserved;
-	byte minute;
-	byte second;
-	byte frame;
+	u8 reserved;
+	u8 minute;
+	u8 second;
+	u8 frame;
 };
 
 /* Space to hold the disk TOC. */
 #define MAX_TRACKS 99
 struct atapi_toc_header {
 	unsigned short toc_length;
-	byte first_track;
-	byte last_track;
+	u8 first_track;
+	u8 last_track;
 };
 
 struct atapi_toc_entry {
-	byte reserved1;
+	u8 reserved1;
 #if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 adr     : 4;
-	__u8 control : 4;
+	u8 adr     : 4;
+	u8 control : 4;
 #elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 control : 4;
-	__u8 adr     : 4;
+	u8 control : 4;
+	u8 adr     : 4;
 #else
 #error "Please fix <asm/byteorder.h>"
 #endif
-	byte track;
-	byte reserved2;
+	u8 track;
+	u8 reserved2;
 	union {
 		unsigned lba;
 		struct atapi_msf msf;

drivers/ide/it821x.c

@@ -279,7 +279,7 @@ static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio)
  *	the shared MWDMA/PIO timing register.
  */
 
-static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
+static void it821x_tune_mwdma(ide_drive_t *drive, u8 mode_wanted)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -316,7 +316,7 @@ static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
  *	controller when doing UDMA modes in pass through.
  */
 
-static void it821x_tune_udma (ide_drive_t *drive, byte mode_wanted)
+static void it821x_tune_udma(ide_drive_t *drive, u8 mode_wanted)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);

drivers/ide/qd65xx.h

@@ -31,8 +31,8 @@
 
 #define QD_CONFIG(hwif)		((hwif)->config_data & 0x00ff)
 
-#define QD_TIMING(drive)	(byte)(((drive)->drive_data) & 0x00ff)
-#define QD_TIMREG(drive)	(byte)((((drive)->drive_data) & 0xff00) >> 8)
+#define QD_TIMING(drive)	(u8)(((drive)->drive_data) & 0x00ff)
+#define QD_TIMREG(drive)	(u8)((((drive)->drive_data) & 0xff00) >> 8)
 
 #define QD6500_DEF_DATA		((QD_TIM1_PORT<<8) | (QD_ID3 ? 0x0c : 0x08))
 #define QD6580_DEF_DATA		((QD_TIM1_PORT<<8) | (QD_ID3 ? 0x0a : 0x00))

drivers/ide/sc1200.c

@@ -172,7 +172,7 @@ static int sc1200_dma_end(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	unsigned long dma_base = hwif->dma_base;
-	byte dma_stat;
+	u8 dma_stat;
 
 	dma_stat = inb(dma_base+2);		/* get DMA status */
 

include/linux/ide.h

@@ -32,8 +32,6 @@
 # define SUPPORT_VLB_SYNC 1
 #endif
 
-typedef unsigned char	byte;	/* used everywhere */
-
 /*
  * Probably not wise to fiddle with these
  */
@@ -1161,7 +1159,7 @@ void ide_pad_transfer(ide_drive_t *, int, int);
 
 ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
 
-ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
+ide_startstop_t ide_error(ide_drive_t *, const char *, u8);
 
 void ide_fix_driveid(u16 *);