Merge tag 'iio-for-3.13e' of...

Merge tag 'iio-for-3.13e' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Fifth round of IIO new drivers, cleanups and functionality for the 3.13 cycle.

New Driver
* Freescale mag3110 magnetometer driver.

New functionality
* Add LPS001WP support to the ST pressure driver.
* Allow the max1363 driver to use only smbus functions for 8 bit devices. This
  allows the driver to be used when more extensive i2c support is not
  available.

Cleanups
* Fix incorrect description of unit conversions in ak8975.
* Switch to pr_err in industrialio-core.c instead of direct printk calls.
* Some simple redundant error handling removal patches.
* Trivial warning suppression by adding brackets to a sizeof call.
* Drop redundant of_match_ptr casts in drivers that are dependent on
  OF supporting being present.  The only purpose of the of_match_ptr
  wrapper was to make stubbing out of the relevant structures trivial.

Fixes
* Make MXS_LRADC depend on INPUT to avoid compile failures. This fixes an
  issue introduced in the previous pull in this cycle.

drivers/iio/accel/kxsd9.c

@@ -222,7 +222,6 @@ static int kxsd9_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
 	struct kxsd9_state *st;
-	int ret;
 
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (!indio_dev)
@@ -244,11 +243,7 @@ static int kxsd9_probe(struct spi_device *spi)
 	spi_setup(spi);
 	kxsd9_power_up(st);
 
-	ret = iio_device_register(indio_dev);
-	if (ret)
-		return ret;
-
-	return 0;
+	return iio_device_register(indio_dev);
 }
 
 static int kxsd9_remove(struct spi_device *spi)

drivers/iio/adc/max1363.c

@@ -165,6 +165,8 @@ struct max1363_chip_info {
  * @thresh_low:		low threshold values
  * @vref:		Reference voltage regulator
  * @vref_uv:		Actual (external or internal) reference voltage
+ * @send:		function used to send data to the chip
+ * @recv:		function used to receive data from the chip
  */
 struct max1363_state {
 	struct i2c_client		*client;
@@ -186,6 +188,10 @@ struct max1363_state {
 	s16				thresh_low[8];
 	struct regulator		*vref;
 	u32				vref_uv;
+	int				(*send)(const struct i2c_client *client,
+						const char *buf, int count);
+	int				(*recv)(const struct i2c_client *client,
+						char *buf, int count);
 };
 
 #define MAX1363_MODE_SINGLE(_num, _mask) {				\
@@ -311,13 +317,37 @@ static const struct max1363_mode
 	return NULL;
 }
 
-static int max1363_write_basic_config(struct i2c_client *client,
-				      unsigned char d1,
-				      unsigned char d2)
+static int max1363_smbus_send(const struct i2c_client *client, const char *buf,
+		int count)
 {
-	u8 tx_buf[2] = {d1, d2};
+	int i, err;
 
-	return i2c_master_send(client, tx_buf, 2);
+	for (i = err = 0; err == 0 && i < count; ++i)
+		err = i2c_smbus_write_byte(client, buf[i]);
+
+	return err ? err : count;
+}
+
+static int max1363_smbus_recv(const struct i2c_client *client, char *buf,
+		int count)
+{
+	int i, ret;
+
+	for (i = 0; i < count; ++i) {
+		ret = i2c_smbus_read_byte(client);
+		if (ret < 0)
+			return ret;
+		buf[i] = ret;
+	}
+
+	return count;
+}
+
+static int max1363_write_basic_config(struct max1363_state *st)
+{
+	u8 tx_buf[2] = { st->setupbyte, st->configbyte };
+
+	return st->send(st->client, tx_buf, 2);
 }
 
 static int max1363_set_scan_mode(struct max1363_state *st)
@@ -327,9 +357,7 @@ static int max1363_set_scan_mode(struct max1363_state *st)
 			    | MAX1363_SE_DE_MASK);
 	st->configbyte |= st->current_mode->conf;
 
-	return max1363_write_basic_config(st->client,
-					  st->setupbyte,
-					  st->configbyte);
+	return max1363_write_basic_config(st);
 }
 
 static int max1363_read_single_chan(struct iio_dev *indio_dev,
@@ -366,7 +394,7 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,
 	}
 	if (st->chip_info->bits != 8) {
 		/* Get reading */
-		data = i2c_master_recv(client, rxbuf, 2);
+		data = st->recv(client, rxbuf, 2);
 		if (data < 0) {
 			ret = data;
 			goto error_ret;
@@ -375,7 +403,7 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev,
 		  ((1 << st->chip_info->bits) - 1);
 	} else {
 		/* Get reading */
-		data = i2c_master_recv(client, rxbuf, 1);
+		data = st->recv(client, rxbuf, 1);
 		if (data < 0) {
 			ret = data;
 			goto error_ret;
@@ -772,11 +800,11 @@ static irqreturn_t max1363_event_handler(int irq, void *private)
 	u8 tx[2] = { st->setupbyte,
 		     MAX1363_MON_INT_ENABLE | (st->monitor_speed << 1) | 0xF0 };
 
-	i2c_master_recv(st->client, &rx, 1);
+	st->recv(st->client, &rx, 1);
 	mask = rx;
 	for_each_set_bit(loc, &mask, 8)
 		iio_push_event(indio_dev, max1363_event_codes[loc], timestamp);
-	i2c_master_send(st->client, tx, 2);
+	st->send(st->client, tx, 2);
 
 	return IRQ_HANDLED;
 }
@@ -812,9 +840,7 @@ static int max1363_monitor_mode_update(struct max1363_state *st, int enabled)
 		st->setupbyte &= ~MAX1363_SETUP_MONITOR_SETUP;
 		st->configbyte &= ~MAX1363_SCAN_MASK;
 		st->monitor_on = false;
-		return max1363_write_basic_config(st->client,
-						st->setupbyte,
-						st->configbyte);
+		return max1363_write_basic_config(st);
 	}
 
 	/* Ensure we are in the relevant mode */
@@ -876,7 +902,7 @@ static int max1363_monitor_mode_update(struct max1363_state *st, int enabled)
 		}
 
 
-	ret = i2c_master_send(st->client, tx_buf, len);
+	ret = st->send(st->client, tx_buf, len);
 	if (ret < 0)
 		goto error_ret;
 	if (ret != len) {
@@ -893,7 +919,7 @@ static int max1363_monitor_mode_update(struct max1363_state *st, int enabled)
 	 */
 	tx_buf[0] = st->setupbyte;
 	tx_buf[1] = MAX1363_MON_INT_ENABLE | (st->monitor_speed << 1) | 0xF0;
-	ret = i2c_master_send(st->client, tx_buf, 2);
+	ret = st->send(st->client, tx_buf, 2);
 	if (ret < 0)
 		goto error_ret;
 	if (ret != 2) {
@@ -1481,9 +1507,9 @@ static irqreturn_t max1363_trigger_handler(int irq, void *p)
 	if (rxbuf == NULL)
 		goto done;
 	if (st->chip_info->bits != 8)
-		b_sent = i2c_master_recv(st->client, rxbuf, numvals*2);
+		b_sent = st->recv(st->client, rxbuf, numvals * 2);
 	else
-		b_sent = i2c_master_recv(st->client, rxbuf, numvals);
+		b_sent = st->recv(st->client, rxbuf, numvals);
 	if (b_sent < 0)
 		goto done_free;
 
@@ -1550,6 +1576,18 @@ static int max1363_probe(struct i2c_client *client,
 		st->vref_uv = vref_uv;
 	}
 
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		st->send = i2c_master_send;
+		st->recv = i2c_master_recv;
+	} else if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)
+			&& st->chip_info->bits == 8) {
+		st->send = max1363_smbus_send;
+		st->recv = max1363_smbus_recv;
+	} else {
+		ret = -EOPNOTSUPP;
+		goto error_disable_reg;
+	}
+
 	ret = max1363_alloc_scan_masks(indio_dev);
 	if (ret)
 		goto error_disable_reg;

drivers/iio/adc/nau7802.c

@@ -570,7 +570,7 @@ static struct i2c_driver nau7802_driver = {
 	.id_table = nau7802_i2c_id,
 	.driver = {
 		   .name = "nau7802",
-		   .of_match_table = of_match_ptr(nau7802_dt_ids),
+		   .of_match_table = nau7802_dt_ids,
 	},
 };
 

drivers/iio/adc/ti_am335x_adc.c

@@ -515,7 +515,7 @@ static struct platform_driver tiadc_driver = {
 		.name   = "TI-am335x-adc",
 		.owner	= THIS_MODULE,
 		.pm	= TIADC_PM_OPS,
-		.of_match_table = of_match_ptr(ti_adc_dt_ids),
+		.of_match_table = ti_adc_dt_ids,
 	},
 	.probe	= tiadc_probe,
 	.remove	= tiadc_remove,

drivers/iio/adc/twl6030-gpadc.c

@@ -887,7 +887,7 @@ static int twl6030_gpadc_probe(struct platform_device *pdev)
 	int irq;
 	int ret;
 
-	match = of_match_device(of_match_ptr(of_twl6030_match_tbl), dev);
+	match = of_match_device(of_twl6030_match_tbl, dev);
 	if (!match)
 		return -EINVAL;
 
@@ -948,9 +948,7 @@ static int twl6030_gpadc_probe(struct platform_device *pdev)
 	indio_dev->channels = pdata->iio_channels;
 	indio_dev->num_channels = pdata->nchannels;
 
-	ret = iio_device_register(indio_dev);
-
-	return ret;
+	return iio_device_register(indio_dev);
 }
 
 static int twl6030_gpadc_remove(struct platform_device *pdev)

drivers/iio/dac/ad5421.c

@@ -514,13 +514,7 @@ static int ad5421_probe(struct spi_device *spi)
 			return ret;
 	}
 
-	ret = iio_device_register(indio_dev);
-	if (ret) {
-		dev_err(&spi->dev, "Failed to register iio device: %d\n", ret);
-		return ret;
-	}
-
-	return 0;
+	return iio_device_register(indio_dev);
 }
 
 static int ad5421_remove(struct spi_device *spi)

drivers/iio/dac/ad5755.c

@@ -589,13 +589,7 @@ static int ad5755_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	ret = iio_device_register(indio_dev);
-	if (ret) {
-		dev_err(&spi->dev, "Failed to register iio device: %d\n", ret);
-		return ret;
-	}
-
-	return 0;
+	return iio_device_register(indio_dev);
 }
 
 static int ad5755_remove(struct spi_device *spi)

drivers/iio/dac/max517.c

@@ -160,7 +160,6 @@ static int max517_probe(struct i2c_client *client,
 	struct max517_data *data;
 	struct iio_dev *indio_dev;
 	struct max517_platform_data *platform_data = client->dev.platform_data;
-	int err;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
@@ -192,13 +191,7 @@ static int max517_probe(struct i2c_client *client,
 		data->vref_mv[1] = platform_data->vref_mv[1];
 	}
 
-	err = iio_device_register(indio_dev);
-	if (err)
-		return err;
-
-	dev_info(&client->dev, "DAC registered\n");
-
-	return 0;
+	return iio_device_register(indio_dev);
 }
 
 static int max517_remove(struct i2c_client *client)

drivers/iio/dac/mcp4725.c

@@ -320,13 +320,7 @@ static int mcp4725_probe(struct i2c_client *client,
 	data->powerdown_mode = pd ? pd-1 : 2; /* 500kohm_to_gnd */
 	data->dac_value = (inbuf[1] << 4) | (inbuf[2] >> 4);
 
-	err = iio_device_register(indio_dev);
-	if (err)
-		return err;
-
-	dev_info(&client->dev, "MCP4725 DAC registered\n");
-
-	return 0;
+	return iio_device_register(indio_dev);
 }
 
 static int mcp4725_remove(struct i2c_client *client)

drivers/iio/industrialio-core.c

@@ -9,6 +9,8 @@
  * Based on elements of hwmon and input subsystems.
  */
 
+#define pr_fmt(fmt) "iio-core: " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/idr.h>
@@ -132,16 +134,13 @@ static int __init iio_init(void)
 	/* Register sysfs bus */
 	ret  = bus_register(&iio_bus_type);
 	if (ret < 0) {
-		printk(KERN_ERR
-		       "%s could not register bus type\n",
-			__FILE__);
+		pr_err("could not register bus type\n");
 		goto error_nothing;
 	}
 
 	ret = alloc_chrdev_region(&iio_devt, 0, IIO_DEV_MAX, "iio");
 	if (ret < 0) {
-		printk(KERN_ERR "%s: failed to allocate char dev region\n",
-		       __FILE__);
+		pr_err("failed to allocate char dev region\n");
 		goto error_unregister_bus_type;
 	}
 
@@ -686,7 +685,7 @@ int __iio_add_chan_devattr(const char *postfix,
 	int ret;
 	struct iio_dev_attr *iio_attr, *t;
 
-	iio_attr = kzalloc(sizeof *iio_attr, GFP_KERNEL);
+	iio_attr = kzalloc(sizeof(*iio_attr), GFP_KERNEL);
 	if (iio_attr == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -951,7 +950,7 @@ struct iio_dev *iio_device_alloc(int sizeof_priv)
 		dev->id = ida_simple_get(&iio_ida, 0, 0, GFP_KERNEL);
 		if (dev->id < 0) {
 			/* cannot use a dev_err as the name isn't available */
-			printk(KERN_ERR "Failed to get id\n");
+			pr_err("failed to get device id\n");
 			kfree(dev);
 			return NULL;
 		}

drivers/iio/light/vcnl4000.c

@@ -179,11 +179,7 @@ static int vcnl4000_probe(struct i2c_client *client,
 	indio_dev->name = VCNL4000_DRV_NAME;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0)
-		return ret;
-
-	return 0;
+	return iio_device_register(indio_dev);
 }
 
 static int vcnl4000_remove(struct i2c_client *client)

drivers/iio/magnetometer/Kconfig

@@ -16,6 +16,16 @@ config AK8975
 	  To compile this driver as a module, choose M here: the module
 	  will be called ak8975.
 
+config MAG3110
+	tristate "Freescale MAG3110 3-Axis Magnetometer"
+	depends on I2C
+	help
+	  Say yes here to build support for the Freescale MAG3110 3-Axis
+	  magnetometer.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mag3110.
+
 config HID_SENSOR_MAGNETOMETER_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER

drivers/iio/magnetometer/Makefile

@@ -4,6 +4,7 @@
 
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AK8975)	+= ak8975.o
+obj-$(CONFIG_MAG3110)	+= mag3110.o
 obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o
 
 obj-$(CONFIG_IIO_ST_MAGN_3AXIS) += st_magn.o

drivers/iio/magnetometer/ak8975.c

@@ -263,7 +263,7 @@ static int ak8975_setup(struct i2c_client *client)
  *
  * HuT = H * 1229/4096, or roughly, 3/10.
  *
- * Since 1uT = 100 gauss, our final scale factor becomes:
+ * Since 1uT = 0.01 gauss, our final scale factor becomes:
  *
  * Hadj = H * ((ASA + 128) / 256) * 3/10 * 100
  * Hadj = H * ((ASA + 128) * 30 / 256

drivers/iio/magnetometer/mag3110.c

+/*
+ * mag3110.c - Support for Freescale MAG3110 magnetometer sensor
+ *
+ * Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * (7-bit I2C slave address 0x0e)
+ *
+ * TODO: irq, user offset, oversampling, continuous mode
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/delay.h>
+
+#define MAG3110_STATUS 0x00
+#define MAG3110_OUT_X 0x01 /* MSB first */
+#define MAG3110_OUT_Y 0x03
+#define MAG3110_OUT_Z 0x05
+#define MAG3110_WHO_AM_I 0x07
+#define MAG3110_OFF_X 0x09 /* MSB first */
+#define MAG3110_OFF_Y 0x0b
+#define MAG3110_OFF_Z 0x0d
+#define MAG3110_DIE_TEMP 0x0f
+#define MAG3110_CTRL_REG1 0x10
+#define MAG3110_CTRL_REG2 0x11
+
+#define MAG3110_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
+
+#define MAG3110_CTRL_DR_MASK (BIT(7) | BIT(6) | BIT(5))
+#define MAG3110_CTRL_DR_SHIFT 5
+#define MAG3110_CTRL_DR_DEFAULT 0
+
+#define MAG3110_CTRL_TM BIT(1) /* trigger single measurement */
+#define MAG3110_CTRL_AC BIT(0) /* continuous measurements */
+
+#define MAG3110_CTRL_AUTO_MRST_EN BIT(7) /* magnetic auto-reset */
+#define MAG3110_CTRL_RAW BIT(5) /* measurements not user-offset corrected */
+
+#define MAG3110_DEVICE_ID 0xc4
+
+/* Each client has this additional data */
+struct mag3110_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	u8 ctrl_reg1;
+};
+
+static int mag3110_request(struct mag3110_data *data)
+{
+	int ret, tries = 150;
+
+	/* trigger measurement */
+	ret = i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
+		data->ctrl_reg1 | MAG3110_CTRL_TM);
+	if (ret < 0)
+		return ret;
+
+	while (tries-- > 0) {
+		ret = i2c_smbus_read_byte_data(data->client, MAG3110_STATUS);
+		if (ret < 0)
+			return ret;
+		/* wait for data ready */
+		if ((ret & MAG3110_STATUS_DRDY) == MAG3110_STATUS_DRDY)
+			break;
+		msleep(20);
+	}
+
+	if (tries < 0) {
+		dev_err(&data->client->dev, "data not ready\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int mag3110_read(struct mag3110_data *data, __be16 buf[3])
+{
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = mag3110_request(data);
+	if (ret < 0) {
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+	ret = i2c_smbus_read_i2c_block_data(data->client,
+		MAG3110_OUT_X, 3 * sizeof(__be16), (u8 *) buf);
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static ssize_t mag3110_show_int_plus_micros(char *buf,
+	const int (*vals)[2], int n)
+{
+	size_t len = 0;
+
+	while (n-- > 0)
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+			"%d.%d ", vals[n][0], vals[n][1]);
+
+	/* replace trailing space by newline */
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static int mag3110_get_int_plus_micros_index(const int (*vals)[2], int n,
+					int val, int val2)
+{
+	while (n-- > 0)
+		if (val == vals[n][0] && val2 == vals[n][1])
+			return n;
+
+	return -EINVAL;
+}
+
+static const int mag3110_samp_freq[8][2] = {
+	{80, 0}, {40, 0}, {20, 0}, {10, 0}, {5, 0}, {2, 500000},
+	{1, 250000}, {0, 625000}
+};
+
+static ssize_t mag3110_show_samp_freq_avail(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return mag3110_show_int_plus_micros(buf, mag3110_samp_freq, 8);
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mag3110_show_samp_freq_avail);
+
+static int mag3110_get_samp_freq_index(struct mag3110_data *data,
+	int val, int val2)
+{
+	return mag3110_get_int_plus_micros_index(mag3110_samp_freq, 8, val,
+		val2);
+}
+
+static int mag3110_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct mag3110_data *data = iio_priv(indio_dev);
+	__be16 buffer[3];
+	int i, ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_MAGN: /* in 0.1 uT / LSB */
+			ret = mag3110_read(data, buffer);
+			if (ret < 0)
+				return ret;
+			*val = sign_extend32(
+				be16_to_cpu(buffer[chan->scan_index]), 15);
+			return IIO_VAL_INT;
+		case IIO_TEMP: /* in 1 C / LSB */
+			mutex_lock(&data->lock);
+			ret = mag3110_request(data);
+			if (ret < 0) {
+				mutex_unlock(&data->lock);
+				return ret;
+			}
+			ret = i2c_smbus_read_byte_data(data->client,
+				MAG3110_DIE_TEMP);
+			mutex_unlock(&data->lock);
+			if (ret < 0)
+				return ret;
+			*val = sign_extend32(ret, 7);
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		i = data->ctrl_reg1 >> MAG3110_CTRL_DR_SHIFT;
+		*val = mag3110_samp_freq[i][0];
+		*val2 = mag3110_samp_freq[i][1];
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+	return -EINVAL;
+}
+
+static int mag3110_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct mag3110_data *data = iio_priv(indio_dev);
+	int rate;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		rate = mag3110_get_samp_freq_index(data, val, val2);
+		if (rate < 0)
+			return -EINVAL;
+
+		data->ctrl_reg1 &= ~MAG3110_CTRL_DR_MASK;
+		data->ctrl_reg1 |= rate << MAG3110_CTRL_DR_SHIFT;
+		return i2c_smbus_write_byte_data(data->client,
+			MAG3110_CTRL_REG1, data->ctrl_reg1);
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t mag3110_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct mag3110_data *data = iio_priv(indio_dev);
+	u8 buffer[16]; /* 3 16-bit channels + 1 byte temp + padding + ts */
+	int ret;
+
+	ret = mag3110_read(data, (__be16 *) buffer);
+	if (ret < 0)
+		goto done;
+
+	if (test_bit(3, indio_dev->active_scan_mask)) {
+		ret = i2c_smbus_read_byte_data(data->client,
+			MAG3110_DIE_TEMP);
+		if (ret < 0)
+			goto done;
+		buffer[6] = ret;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+		iio_get_time_ns());
+
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+#define MAG3110_CHANNEL(axis, idx) { \
+	.type = IIO_MAGN, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_##axis, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+		BIT(IIO_CHAN_INFO_SCALE), \
+	.scan_index = idx, \
+	.scan_type = IIO_ST('s', 16, 16, IIO_BE), \
+}
+
+static const struct iio_chan_spec mag3110_channels[] = {
+	MAG3110_CHANNEL(X, 0),
+	MAG3110_CHANNEL(Y, 1),
+	MAG3110_CHANNEL(Z, 2),
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_index = 3,
+		.scan_type = IIO_ST('s', 8, 8, 0),
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+static struct attribute *mag3110_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group mag3110_group = {
+	.attrs = mag3110_attributes,
+};
+
+static const struct iio_info mag3110_info = {
+	.attrs = &mag3110_group,
+	.read_raw = &mag3110_read_raw,
+	.write_raw = &mag3110_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static const unsigned long mag3110_scan_masks[] = {0x7, 0xf, 0};
+
+static int mag3110_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct mag3110_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
+	if (ret < 0)
+		return ret;
+	if (ret != MAG3110_DEVICE_ID)
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+
+	i2c_set_clientdata(client, indio_dev);
+	indio_dev->info = &mag3110_info;
+	indio_dev->name = id->name;
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = mag3110_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mag3110_channels);
+	indio_dev->available_scan_masks = mag3110_scan_masks;
+
+	data->ctrl_reg1 = MAG3110_CTRL_DR_DEFAULT;
+	ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG1,
+		data->ctrl_reg1);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG2,
+		MAG3110_CTRL_AUTO_MRST_EN | MAG3110_CTRL_RAW);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+		mag3110_trigger_handler, NULL);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto buffer_cleanup;
+	return 0;
+
+buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+	return ret;
+}
+
+static int mag3110_standby(struct mag3110_data *data)
+{
+	return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
+		data->ctrl_reg1 & ~MAG3110_CTRL_AC);
+}
+
+static int mag3110_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	mag3110_standby(iio_priv(indio_dev));
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mag3110_suspend(struct device *dev)
+{
+	return mag3110_standby(iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev))));
+}
+
+static int mag3110_resume(struct device *dev)
+{
+	struct mag3110_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
+
+	return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
+		data->ctrl_reg1);
+}
+
+static SIMPLE_DEV_PM_OPS(mag3110_pm_ops, mag3110_suspend, mag3110_resume);
+#define MAG3110_PM_OPS (&mag3110_pm_ops)
+#else
+#define MAG3110_PM_OPS NULL
+#endif
+
+static const struct i2c_device_id mag3110_id[] = {
+	{ "mag3110", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mag3110_id);
+
+static struct i2c_driver mag3110_driver = {
+	.driver = {
+		.name	= "mag3110",
+		.pm	= MAG3110_PM_OPS,
+	},
+	.probe = mag3110_probe,
+	.remove = mag3110_remove,
+	.id_table = mag3110_id,
+};
+module_i2c_driver(mag3110_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("Freescale MAG3110 magnetometer driver");
+MODULE_LICENSE("GPL");

drivers/iio/pressure/Kconfig

@@ -14,7 +14,7 @@ config IIO_ST_PRESS
 	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
 	help
 	  Say yes here to build support for STMicroelectronics pressure
-	  sensors: LPS331AP.
+	  sensors: LPS001WP, LPS331AP.
 
 	  This driver can also be built as a module. If so, these modules
 	  will be created:

drivers/iio/pressure/st_pressure_spi.c

@@ -48,6 +48,7 @@ static int st_press_spi_remove(struct spi_device *spi)
 }
 
 static const struct spi_device_id st_press_id_table[] = {
+	{ LPS001WP_PRESS_DEV_NAME },
 	{ LPS331AP_PRESS_DEV_NAME },
 	{},
 };

drivers/staging/iio/adc/Kconfig

@@ -114,6 +114,7 @@ config LPC32XX_ADC
 config MXS_LRADC
 	tristate "Freescale i.MX23/i.MX28 LRADC"
 	depends on ARCH_MXS || COMPILE_TEST
+	depends on INPUT
 	select STMP_DEVICE
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER