bcma: update pci configuration for bcm4706/bcm4716

Update the PCI configuration for BCM4706 and BCM4716 per the 2011
Broadcom SDK.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/bcma/driver_pci_host.c

@@ -427,7 +427,7 @@ void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
 	/* Reset RC */
 	usleep_range(3000, 5000);
 	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
-	usleep_range(1000, 2000);
+	msleep(50);
 	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
 			BCMA_CORE_PCI_CTL_RST_OE);
 
@@ -489,6 +489,17 @@ void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
 
 	bcma_core_pci_enable_crs(pc);
 
+	if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 ||
+	    bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) {
+		u16 val16;
+		bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
+					&val16, sizeof(val16));
+		val16 |= (2 << 5);	/* Max payload size of 512 */
+		val16 |= (2 << 12);	/* MRRS 512 */
+		bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
+					 &val16, sizeof(val16));
+	}
+
 	/* Enable PCI bridge BAR0 memory & master access */
 	tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
 	bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp));

include/linux/bcma/bcma_driver_pci.h

@@ -179,6 +179,8 @@ struct pci_dev;
 #define BCMA_CORE_PCI_CFG_FUN_MASK		7	/* Function mask */
 #define BCMA_CORE_PCI_CFG_OFF_MASK		0xfff	/* Register mask */
 
+#define BCMA_CORE_PCI_CFG_DEVCTRL		0xd8
+
 /* PCIE Root Capability Register bits (Host mode only) */
 #define BCMA_CORE_PCI_RC_CRS_VISIBILITY		0x0001