Commit 990e5666 authored by Anatoly Stepanov's avatar Anatoly Stepanov Committed by Greg Kroah-Hartman

staging: sm750fb: fix 'switch and case' indentation

Fix according to checkpatch.pl message:
"ERROR: switch and case should be at the same indent"
Signed-off-by: default avatarAnatoly Stepanov <drivengroove@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5e83e283
......@@ -153,15 +153,15 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
}
switch (spec_share->state.pnltype) {
case sm750_doubleTFT:
case sm750_24TFT:
case sm750_dualTFT:
POKE32(PANEL_DISPLAY_CTRL,
FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL),
PANEL_DISPLAY_CTRL,
TFT_DISP,
spec_share->state.pnltype));
break;
case sm750_doubleTFT:
case sm750_24TFT:
case sm750_dualTFT:
POKE32(PANEL_DISPLAY_CTRL,
FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL),
PANEL_DISPLAY_CTRL,
TFT_DISP,
spec_share->state.pnltype));
break;
}
} else {
/* for 750LE ,no DVI chip initilization makes Monitor no signal */
......@@ -267,17 +267,17 @@ int hw_sm750_crtc_checkMode(struct lynxfb_crtc *crtc, struct fb_var_screeninfo *
share = container_of(crtc, struct lynxfb_par, crtc)->share;
switch (var->bits_per_pixel) {
case 8:
case 16:
break;
case 32:
if (share->revid == SM750LE_REVISION_ID) {
pr_debug("750le do not support 32bpp\n");
return -EINVAL;
}
break;
default:
case 8:
case 16:
break;
case 32:
if (share->revid == SM750LE_REVISION_ID) {
pr_debug("750le do not support 32bpp\n");
return -EINVAL;
}
break;
default:
return -EINVAL;
}
......@@ -307,16 +307,16 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
if (!share->accel_off) {
/* set 2d engine pixel format according to mode bpp */
switch (var->bits_per_pixel) {
case 8:
fmt = 0;
break;
case 16:
fmt = 1;
break;
case 32:
default:
fmt = 2;
break;
case 8:
fmt = 0;
break;
case 16:
fmt = 1;
break;
case 32:
default:
fmt = 2;
break;
}
hw_set2dformat(&share->accel, fmt);
}
......@@ -427,45 +427,45 @@ int hw_sm750le_setBLANK(struct lynxfb_output *output, int blank) {
switch (blank) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_UNBLANK:
case FB_BLANK_UNBLANK:
#else
case VESA_NO_BLANKING:
case VESA_NO_BLANKING:
#endif
dpms = CRT_DISPLAY_CTRL_DPMS_0;
crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
break;
dpms = CRT_DISPLAY_CTRL_DPMS_0;
crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_NORMAL:
dpms = CRT_DISPLAY_CTRL_DPMS_0;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
case FB_BLANK_NORMAL:
dpms = CRT_DISPLAY_CTRL_DPMS_0;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
#endif
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_VSYNC_SUSPEND:
case FB_BLANK_VSYNC_SUSPEND:
#else
case VESA_VSYNC_SUSPEND:
case VESA_VSYNC_SUSPEND:
#endif
dpms = CRT_DISPLAY_CTRL_DPMS_2;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
dpms = CRT_DISPLAY_CTRL_DPMS_2;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_HSYNC_SUSPEND:
#else
case VESA_HSYNC_SUSPEND:
case VESA_HSYNC_SUSPEND:
#endif
dpms = CRT_DISPLAY_CTRL_DPMS_1;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
dpms = CRT_DISPLAY_CTRL_DPMS_1;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_POWERDOWN:
case FB_BLANK_POWERDOWN:
#else
case VESA_POWERDOWN:
case VESA_POWERDOWN:
#endif
dpms = CRT_DISPLAY_CTRL_DPMS_3;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
default:
return -EINVAL;
dpms = CRT_DISPLAY_CTRL_DPMS_3;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
default:
return -EINVAL;
}
if (output->paths & sm750_crt) {
......@@ -483,50 +483,50 @@ int hw_sm750_setBLANK(struct lynxfb_output *output, int blank)
switch (blank) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_UNBLANK:
case FB_BLANK_UNBLANK:
#else
case VESA_NO_BLANKING:
case VESA_NO_BLANKING:
#endif
pr_info("flag = FB_BLANK_UNBLANK \n");
dpms = SYSTEM_CTRL_DPMS_VPHP;
pps = PANEL_DISPLAY_CTRL_DATA_ENABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
break;
pr_info("flag = FB_BLANK_UNBLANK \n");
dpms = SYSTEM_CTRL_DPMS_VPHP;
pps = PANEL_DISPLAY_CTRL_DATA_ENABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_NORMAL:
pr_info("flag = FB_BLANK_NORMAL \n");
dpms = SYSTEM_CTRL_DPMS_VPHP;
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
case FB_BLANK_NORMAL:
pr_info("flag = FB_BLANK_NORMAL \n");
dpms = SYSTEM_CTRL_DPMS_VPHP;
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
#endif
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_VSYNC_SUSPEND:
case FB_BLANK_VSYNC_SUSPEND:
#else
case VESA_VSYNC_SUSPEND:
case VESA_VSYNC_SUSPEND:
#endif
dpms = SYSTEM_CTRL_DPMS_VNHP;
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
dpms = SYSTEM_CTRL_DPMS_VNHP;
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_HSYNC_SUSPEND:
#else
case VESA_HSYNC_SUSPEND:
case VESA_HSYNC_SUSPEND:
#endif
dpms = SYSTEM_CTRL_DPMS_VPHN;
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
dpms = SYSTEM_CTRL_DPMS_VPHN;
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_POWERDOWN:
case FB_BLANK_POWERDOWN:
#else
case VESA_POWERDOWN:
case VESA_POWERDOWN:
#endif
dpms = SYSTEM_CTRL_DPMS_VNHN;
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
dpms = SYSTEM_CTRL_DPMS_VNHN;
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
}
if (output->paths & sm750_crt) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment