Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
 "The main item is that we try to better handle the newer trackpoints on
  Lenovo devices that are now being produced by Elan/ALPS/NXP and only
  implement a small subset of the original IBM trackpoint controls"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01"
  Input: trackpoint - only expose supported controls for Elan, ALPS and NXP
  Input: trackpoint - force 3 buttons if 0 button is reported
  Input: xpad - add support for PDP Xbox One controllers
  Input: stmfts,s6sy671 - add SPDX identifier

drivers/input/joystick/xpad.c

@@ -229,6 +229,7 @@ static const struct xpad_device {
 	{ 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x0246, "Rock Candy Gamepad for Xbox One 2015", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x02ab, "PDP Controller for Xbox One", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x0346, "Rock Candy Gamepad for Xbox One 2016", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 },
@@ -475,6 +476,22 @@ static const u8 xboxone_hori_init[] = {
 	0x00, 0x00, 0x00, 0x80, 0x00
 };
 
+/*
+ * This packet is required for some of the PDP pads to start
+ * sending input reports. One of those pads is (0x0e6f:0x02ab).
+ */
+static const u8 xboxone_pdp_init1[] = {
+	0x0a, 0x20, 0x00, 0x03, 0x00, 0x01, 0x14
+};
+
+/*
+ * This packet is required for some of the PDP pads to start
+ * sending input reports. One of those pads is (0x0e6f:0x02ab).
+ */
+static const u8 xboxone_pdp_init2[] = {
+	0x06, 0x20, 0x00, 0x02, 0x01, 0x00
+};
+
 /*
  * A specific rumble packet is required for some PowerA pads to start
  * sending input reports. One of those pads is (0x24c6:0x543a).
@@ -505,6 +522,8 @@ static const struct xboxone_init_packet xboxone_init_packets[] = {
 	XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init),
 	XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init),
 	XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init),
+	XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init1),
+	XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init2),
 	XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
 	XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init),
 	XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init),

drivers/input/mouse/trackpoint.h

@@ -21,10 +21,16 @@
 #define TP_COMMAND		0xE2	/* Commands start with this */
 
 #define TP_READ_ID		0xE1	/* Sent for device identification */
-#define TP_MAGIC_IDENT		0x03	/* Sent after a TP_READ_ID followed */
-					/* by the firmware ID */
-					/* Firmware ID includes 0x1, 0x2, 0x3 */
 
+/*
+ * Valid first byte responses to the "Read Secondary ID" (0xE1) command.
+ * 0x01 was the original IBM trackpoint, others implement very limited
+ * subset of trackpoint features.
+ */
+#define TP_VARIANT_IBM		0x01
+#define TP_VARIANT_ALPS		0x02
+#define TP_VARIANT_ELAN		0x03
+#define TP_VARIANT_NXP		0x04
 
 /*
  * Commands
@@ -136,18 +142,20 @@
 
 #define MAKE_PS2_CMD(params, results, cmd) ((params<<12) | (results<<8) | (cmd))
 
-struct trackpoint_data
-{
-	unsigned char sensitivity, speed, inertia, reach;
-	unsigned char draghys, mindrag;
-	unsigned char thresh, upthresh;
-	unsigned char ztime, jenks;
-	unsigned char drift_time;
+struct trackpoint_data {
+	u8 variant_id;
+	u8 firmware_id;
+
+	u8 sensitivity, speed, inertia, reach;
+	u8 draghys, mindrag;
+	u8 thresh, upthresh;
+	u8 ztime, jenks;
+	u8 drift_time;
 
 	/* toggles */
-	unsigned char press_to_select;
-	unsigned char skipback;
-	unsigned char ext_dev;
+	bool press_to_select;
+	bool skipback;
+	bool ext_dev;
 };
 
 #ifdef CONFIG_MOUSE_PS2_TRACKPOINT

drivers/input/rmi4/rmi_f01.c

@@ -570,14 +570,19 @@ static int rmi_f01_probe(struct rmi_function *fn)
 
 	dev_set_drvdata(&fn->dev, f01);
 
-	error = devm_device_add_group(&fn->rmi_dev->dev, &rmi_f01_attr_group);
+	error = sysfs_create_group(&fn->rmi_dev->dev.kobj, &rmi_f01_attr_group);
 	if (error)
-		dev_warn(&fn->dev,
-			 "Failed to create attribute group: %d\n", error);
+		dev_warn(&fn->dev, "Failed to create sysfs group: %d\n", error);
 
 	return 0;
 }
 
+static void rmi_f01_remove(struct rmi_function *fn)
+{
+	/* Note that the bus device is used, not the F01 device */
+	sysfs_remove_group(&fn->rmi_dev->dev.kobj, &rmi_f01_attr_group);
+}
+
 static int rmi_f01_config(struct rmi_function *fn)
 {
 	struct f01_data *f01 = dev_get_drvdata(&fn->dev);
@@ -717,6 +722,7 @@ struct rmi_function_handler rmi_f01_handler = {
 	},
 	.func		= 0x01,
 	.probe		= rmi_f01_probe,
+	.remove		= rmi_f01_remove,
 	.config		= rmi_f01_config,
 	.attention	= rmi_f01_attention,
 	.suspend	= rmi_f01_suspend,

drivers/input/touchscreen/s6sy761.c

-/*
- * Copyright (c) 2017 Samsung Electronics Co., Ltd.
- * Author: Andi Shyti <andi.shyti@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Samsung S6SY761 Touchscreen device driver
- */
+// SPDX-License-Identifier: GPL-2.0
+// Samsung S6SY761 Touchscreen device driver
+//
+// Copyright (c) 2017 Samsung Electronics Co., Ltd.
+// Copyright (c) 2017 Andi Shyti <andi.shyti@samsung.com>
 
 #include <asm/unaligned.h>
 #include <linux/delay.h>

drivers/input/touchscreen/stmfts.c

-/*
- * Copyright (c) 2017 Samsung Electronics Co., Ltd.
- * Author: Andi Shyti <andi.shyti@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * STMicroelectronics FTS Touchscreen device driver
- */
+// SPDX-License-Identifier: GPL-2.0
+// STMicroelectronics FTS Touchscreen device driver
+//
+// Copyright (c) 2017 Samsung Electronics Co., Ltd.
+// Copyright (c) 2017 Andi Shyti <andi.shyti@samsung.com>
 
 #include <linux/delay.h>
 #include <linux/i2c.h>