Merge branch 'next/soc' of git://git.linaro.org/people/arnd/arm-soc

* 'next/soc' of git://git.linaro.org/people/arnd/arm-soc: (21 commits)
  MAINTAINERS: add ARM/FREESCALE IMX6 entry
  arm/imx: merge i.MX3 and i.MX6
  arm/imx6q: add suspend/resume support
  arm/imx6q: add device tree machine support
  arm/imx6q: add smp and cpu hotplug support
  arm/imx6q: add core drivers clock, gpc, mmdc and src
  arm/imx: add gic_handle_irq function
  arm/imx6q: add core definitions and low-level debug uart
  arm/imx6q: add device tree source
  ARM: highbank: add suspend support
  ARM: highbank: Add cpu hotplug support
  ARM: highbank: add SMP support
  MAINTAINERS: add Calxeda Highbank ARM platform
  ARM: add Highbank core platform support
  ARM: highbank: add devicetree source
  ARM: l2x0: add empty l2x0_of_init
  picoxcell: add a definition of VMALLOC_END
  picoxcell: remove custom ioremap implementation
  picoxcell: add the DTS for the PC7302 board
  picoxcell: add the DTS for pc3x2 and pc3x3 devices
  ...

Fix up trivial conflicts in arch/arm/Kconfig, and some more header file
conflicts in arch/arm/mach-omap2/board-generic.c (as per an ealier merge
by Arnd).

Documentation/devicetree/bindings/arm/calxeda.txt

+Calxeda Highbank Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with Calxeda Cortex-A9 based Highbank SOC shall have the following
+properties.
+
+Required root node properties:
+    - compatible = "calxeda,highbank";

Documentation/devicetree/bindings/arm/fsl.txt

+Freescale i.MX Platforms Device Tree Bindings
+-----------------------------------------------
+
 i.MX51 Babbage Board
 Required root node properties:
     - compatible = "fsl,imx51-babbage", "fsl,imx51";
@@ -17,3 +20,7 @@ Required root node properties:
 i.MX53 Smart Mobile Reference Design Board
 Required root node properties:
     - compatible = "fsl,imx53-smd", "fsl,imx53";
+
+i.MX6 Quad SABRE Automotive Board
+Required root node properties:
+    - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";

Documentation/devicetree/bindings/arm/picoxcell.txt

+Picochip picoXcell device tree bindings.
+========================================
+
+Required root node properties:
+    - compatible:
+	- "picochip,pc7302-pc3x3" : PC7302 development board with PC3X3 device.
+	- "picochip,pc7302-pc3x2" : PC7302 development board with PC3X2 device.
+	- "picochip,pc3x3" : picoXcell PC3X3 device based board.
+	- "picochip,pc3x2" : picoXcell PC3X2 device based board.
+
+Timers required properties:
+    - compatible = "picochip,pc3x2-timer"
+    - interrupts : The single IRQ line for the timer.
+    - clock-freq : The frequency in HZ of the timer.
+    - reg : The register bank for the timer.
+
+Note: two timers are required - one for the scheduler clock and one for the
+event tick/NOHZ.
+
+VIC required properties:
+    - compatible = "arm,pl192-vic".
+    - interrupt-controller.
+    - reg : The register bank for the device.
+    - #interrupt-cells : Must be 1.

MAINTAINERS

@@ -692,6 +692,12 @@ F:	drivers/mtd/nand/bcm_umi_nand.c
 F:	drivers/mtd/nand/bcm_umi_bch.c
 F:	drivers/mtd/nand/nand_bcm_umi.h
 
+ARM/CALXEDA HIGHBANK ARCHITECTURE
+M:	Rob Herring <rob.herring@calxeda.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-highbank/
+
 ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
 M:	Anton Vorontsov <avorontsov@mvista.com>
 S:	Maintained
@@ -791,6 +797,13 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-mx5/
 
+ARM/FREESCALE IMX6
+M:	Shawn Guo <shawn.guo@linaro.org>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
+F:	arch/arm/mach-imx/*imx6*
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

arch/arm/Kconfig

@@ -334,6 +334,20 @@ config ARCH_BCMRING
 	help
 	  Support for Broadcom's BCMRing platform.
 
+config ARCH_HIGHBANK
+	bool "Calxeda Highbank-based"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_TIMER_SP804
+	select CLKDEV_LOOKUP
+	select CPU_V7
+	select GENERIC_CLOCKEVENTS
+	select HAVE_ARM_SCU
+	select USE_OF
+	help
+	  Support for the Calxeda Highbank SoC based boards.
+
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x-based"
 	select CPU_ARM720T
@@ -623,6 +637,24 @@ config ARCH_TEGRA
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
 	  Tegra 6xx and Tegra 2 series).
 
+config ARCH_PICOXCELL
+	bool "Picochip picoXcell"
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_PATCH_PHYS_VIRT
+	select ARM_VIC
+	select CPU_V6K
+	select DW_APB_TIMER
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_SCHED_CLOCK
+	select HAVE_TCM
+	select NO_IOPORT
+	select USE_OF
+	help
+	  This enables support for systems based on the Picochip picoXcell
+	  family of Femtocell devices.  The picoxcell support requires device tree
+	  for all boards.
+
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	select CPU_ARM926T
@@ -1398,7 +1430,7 @@ config SMP
 	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
 		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
 		 ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
-		 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE
+		 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
 	depends on MMU
 	select USE_GENERIC_SMP_HELPERS
 	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP

arch/arm/Kconfig.debug

@@ -128,6 +128,13 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
+	config DEBUG_HIGHBANK_UART
+		bool "Kernel low-level debugging messages via Highbank UART"
+		depends on ARCH_HIGHBANK
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the UART on Highbank based devices.
+
 	config DEBUG_IMX1_UART
 		bool "i.MX1 Debug UART"
 		depends on SOC_IMX1
@@ -184,6 +191,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX50 or i.MX53.
 
+	config DEBUG_IMX6Q_UART
+		bool "i.MX6Q Debug UART"
+		depends on SOC_IMX6Q
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX6Q.
+
 	config DEBUG_S3C_UART0
 		depends on PLAT_SAMSUNG
 		bool "Use S3C UART 0 for low-level debug"

arch/arm/Makefile

@@ -144,6 +144,7 @@ machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
 machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
 machine-$(CONFIG_ARCH_GEMINI)		:= gemini
 machine-$(CONFIG_ARCH_H720X)		:= h720x
+machine-$(CONFIG_ARCH_HIGHBANK)		:= highbank
 machine-$(CONFIG_ARCH_INTEGRATOR)	:= integrator
 machine-$(CONFIG_ARCH_IOP13XX)		:= iop13xx
 machine-$(CONFIG_ARCH_IOP32X)		:= iop32x
@@ -158,7 +159,7 @@ machine-$(CONFIG_ARCH_MMP)		:= mmp
 machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_IMX_V4_V5)	:= imx
-machine-$(CONFIG_ARCH_MX3)		:= imx
+machine-$(CONFIG_ARCH_IMX_V6_V7)	:= imx
 machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
@@ -168,6 +169,7 @@ machine-$(CONFIG_ARCH_OMAP2)		:= omap2
 machine-$(CONFIG_ARCH_OMAP3)		:= omap2
 machine-$(CONFIG_ARCH_OMAP4)		:= omap2
 machine-$(CONFIG_ARCH_ORION5X)		:= orion5x
+machine-$(CONFIG_ARCH_PICOXCELL)	:= picoxcell
 machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
 machine-$(CONFIG_ARCH_PRIMA2)		:= prima2
 machine-$(CONFIG_ARCH_PXA)		:= pxa

arch/arm/boot/dts/highbank.dts

+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+
+/* First 4KB has pen for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+
+/ {
+	model = "Calxeda Highbank";
+	compatible = "calxeda,highbank";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x00000000 0xff900000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyAMA0";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		timer@fff10600 {
+			compatible = "arm,smp-twd";
+			reg = <0xfff10600 0x20>;
+			interrupts = <1 13 0xf04>;
+		};
+
+		watchdog@fff10620 {
+			compatible = "arm,cortex-a9-wdt";
+			reg = <0xfff10620 0x20>;
+			interrupts = <1 14 0xf04>;
+		};
+
+		intc: interrupt-controller@fff11000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#size-cells = <0>;
+			#address-cells = <1>;
+			interrupt-controller;
+			interrupt-parent;
+			reg = <0xfff11000 0x1000>,
+			      <0xfff10100 0x100>;
+		};
+
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0xfff12000 0x1000>;
+			interrupts = <0 70 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
+		};
+
+		sata@ffe08000 {
+			compatible = "calxeda,hb-ahci";
+			reg = <0xffe08000 0x10000>;
+			interrupts = <0 83 4>;
+		};
+
+		sdhci@ffe0e000 {
+			compatible = "calxeda,hb-sdhci";
+			reg = <0xffe0e000 0x1000>;
+			interrupts = <0 90 4>;
+		};
+
+		ipc@fff20000 {
+			compatible = "arm,pl320", "arm,primecell";
+			reg = <0xfff20000 0x1000>;
+			interrupts = <0 7 4>;
+		};
+
+		gpioe: gpio@fff30000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff30000 0x1000>;
+			interrupts = <0 14 4>;
+		};
+
+		gpiof: gpio@fff31000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff31000 0x1000>;
+			interrupts = <0 15 4>;
+		};
+
+		gpiog: gpio@fff32000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff32000 0x1000>;
+			interrupts = <0 16 4>;
+		};
+
+		gpioh: gpio@fff33000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff33000 0x1000>;
+			interrupts = <0 17 4>;
+		};
+
+		timer {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xfff34000 0x1000>;
+			interrupts = <0 18 4>;
+		};
+
+		rtc@fff35000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0xfff35000 0x1000>;
+			interrupts = <0 19 4>;
+		};
+
+		serial@fff36000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xfff36000 0x1000>;
+			interrupts = <0 20 4>;
+		};
+
+		smic@fff3a000 {
+			compatible = "ipmi-smic";
+			device_type = "ipmi";
+			reg = <0xfff3a000 0x1000>;
+			interrupts = <0 24 4>;
+			reg-size = <4>;
+			reg-spacing = <4>;
+		};
+
+		sregs@fff3c000 {
+			compatible = "calxeda,hb-sregs";
+			reg = <0xfff3c000 0x1000>;
+		};
+
+		dma@fff3d000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xfff3d000 0x1000>;
+			interrupts = <0 92 4>;
+		};
+	};
+};

arch/arm/boot/dts/imx6q-sabreauto.dts

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+	chosen {
+		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
+	};
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	soc {
+		aips-bus@02100000 { /* AIPS2 */
+			enet@02188000 {
+				phy-mode = "rgmii";
+				local-mac-address = [00 04 9F 01 1B 61];
+				status = "okay";
+			};
+
+			usdhc@02198000 { /* uSDHC3 */
+				cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */
+				wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */
+				status = "okay";
+			};
+
+			usdhc@0219c000 { /* uSDHC4 */
+				fsl,card-wired;
+				status = "okay";
+			};
+
+			uart3: uart@021f0000 { /* UART4 */
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		debug-led {
+			label = "Heartbeat";
+			gpios = <&gpio2 25 0>; /* GPIO3_25 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};

arch/arm/boot/dts/picoxcell-pc3x2.dtsi

+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+	model = "Picochip picoXcell PC3X2";
+	compatible = "picochip,pc3x2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,1176jz-s";
+			clock-frequency = <400000000>;
+			reg = <0>;
+			d-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-line-size = <32>;
+			i-cache-size = <32768>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pclk: clock@0 {
+			compatible = "fixed-clock";
+			clock-outputs = "bus", "pclk";
+			clock-frequency = <200000000>;
+			ref-clock = <&ref_clk>, "ref";
+		};
+	};
+
+	paxi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80000000 0x400000>;
+
+		emac: gem@30000 {
+			compatible = "cadence,gem";
+			reg = <0x30000 0x10000>;
+			interrupts = <31>;
+		};
+
+		dmac1: dmac@40000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x40000 0x10000>;
+			interrupts = <25>;
+		};
+
+		dmac2: dmac@50000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x50000 0x10000>;
+			interrupts = <26>;
+		};
+
+		vic0: interrupt-controller@60000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x60000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@64000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x64000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		fuse: picoxcell-fuse@80000 {
+			compatible = "picoxcell,fuse-pc3x2";
+			reg = <0x80000 0x10000>;
+		};
+
+		ssi: picoxcell-spi@90000 {
+			compatible = "picoxcell,spi";
+			reg = <0x90000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <10>;
+		};
+
+		ipsec: spacc@100000 {
+			compatible = "picochip,spacc-ipsec";
+			reg = <0x100000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <24>;
+			ref-clock = <&pclk>, "ref";
+		};
+
+		srtp: spacc@140000 {
+			compatible = "picochip,spacc-srtp";
+			reg = <0x140000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <23>;
+		};
+
+		l2_engine: spacc@180000 {
+			compatible = "picochip,spacc-l2";
+			reg = <0x180000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <22>;
+			ref-clock = <&pclk>, "ref";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x200000 0x80000>;
+
+			rtc0: rtc@00000 {
+				compatible = "picochip,pc3x2-rtc";
+				clock-freq = <200000000>;
+				reg = <0x00000 0xf>;
+				interrupt-parent = <&vic1>;
+				interrupts = <8>;
+			};
+
+			timer0: timer@10000 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <4>;
+				clock-freq = <200000000>;
+				reg = <0x10000 0x14>;
+			};
+
+			timer1: timer@10014 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <5>;
+				clock-freq = <200000000>;
+				reg = <0x10014 0x14>;
+			};
+
+			timer2: timer@10028 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <6>;
+				clock-freq = <200000000>;
+				reg = <0x10028 0x14>;
+			};
+
+			timer3: timer@1003c {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <7>;
+				clock-freq = <200000000>;
+				reg = <0x1003c 0x14>;
+			};
+
+			gpio: gpio@20000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x20000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg-io-width = <4>;
+
+				banka: gpio-controller@0 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <8>;
+
+					regoffset-dat = <0x50>;
+					regoffset-set = <0x00>;
+					regoffset-dirout = <0x04>;
+				};
+
+				bankb: gpio-controller@1 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <8>;
+
+					regoffset-dat = <0x54>;
+					regoffset-set = <0x0c>;
+					regoffset-dirout = <0x10>;
+				};
+			};
+
+			uart0: uart@30000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x30000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <10>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			uart1: uart@40000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x40000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <9>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			wdog: watchdog@50000 {
+				compatible = "snps,dw-apb-wdg";
+				reg = <0x50000 0x10000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <11>;
+				bus-clock = <&pclk>, "bus";
+			};
+		};
+	};
+
+	rwid-axi {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		ebi@50000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40000000 0x08000000
+				  1 0 0x48000000 0x08000000
+				  2 0 0x50000000 0x08000000
+				  3 0 0x58000000 0x08000000>;
+		};
+
+		axi2pico@c0000000 {
+			compatible = "picochip,axi2pico-pc3x2";
+			reg = <0xc0000000 0x10000>;
+			interrupts = <13 14 15 16 17 18 19 20 21>;
+		};
+	};
+};

arch/arm/boot/dts/picoxcell-pc3x3.dtsi

+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+	model = "Picochip picoXcell PC3X3";
+	compatible = "picochip,pc3x3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,1176jz-s";
+			cpu-clock = <&arm_clk>, "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-line-size = <32>;
+			i-cache-size = <32768>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clkgate: clkgate@800a0048 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x800a0048 4>;
+			compatible = "picochip,pc3x3-clk-gate";
+
+			tzprot_clk: clock@0 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <0>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			spi_clk: clock@1 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <1>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			dmac0_clk: clock@2 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <2>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			dmac1_clk: clock@3 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <3>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			ebi_clk: clock@4 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <4>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			ipsec_clk: clock@5 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <5>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			l2_clk: clock@6 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <6>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			trng_clk: clock@7 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <7>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			fuse_clk: clock@8 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <8>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			otp_clk: clock@9 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <9>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+		};
+
+		arm_clk: clock@11 {
+			compatible = "picochip,pc3x3-pll";
+			reg = <0x800a0050 0x8>;
+			picochip,min-freq = <140000000>;
+			picochip,max-freq = <700000000>;
+			ref-clock = <&ref_clk>, "ref";
+			clock-outputs = "cpu";
+		};
+
+		pclk: clock@12 {
+			compatible = "fixed-clock";
+			clock-outputs = "bus", "pclk";
+			clock-frequency = <200000000>;
+			ref-clock = <&ref_clk>, "ref";
+		};
+	};
+
+	paxi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80000000 0x400000>;
+
+		emac: gem@30000 {
+			compatible = "cadence,gem";
+			reg = <0x30000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <31>;
+		};
+
+		dmac1: dmac@40000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x40000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <25>;
+		};
+
+		dmac2: dmac@50000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x50000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <26>;
+		};
+
+		vic0: interrupt-controller@60000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x60000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@64000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x64000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		fuse: picoxcell-fuse@80000 {
+			compatible = "picoxcell,fuse-pc3x3";
+			reg = <0x80000 0x10000>;
+		};
+
+		ssi: picoxcell-spi@90000 {
+			compatible = "picoxcell,spi";
+			reg = <0x90000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <10>;
+		};
+
+		ipsec: spacc@100000 {
+			compatible = "picochip,spacc-ipsec";
+			reg = <0x100000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <24>;
+			ref-clock = <&ipsec_clk>, "ref";
+		};
+
+		srtp: spacc@140000 {
+			compatible = "picochip,spacc-srtp";
+			reg = <0x140000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <23>;
+		};
+
+		l2_engine: spacc@180000 {
+			compatible = "picochip,spacc-l2";
+			reg = <0x180000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <22>;
+			ref-clock = <&l2_clk>, "ref";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x200000 0x80000>;
+
+			rtc0: rtc@00000 {
+				compatible = "picochip,pc3x2-rtc";
+				clock-freq = <200000000>;
+				reg = <0x00000 0xf>;
+				interrupt-parent = <&vic0>;
+				interrupts = <8>;
+			};
+
+			timer0: timer@10000 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <4>;
+				clock-freq = <200000000>;
+				reg = <0x10000 0x14>;
+			};
+
+			timer1: timer@10014 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <5>;
+				clock-freq = <200000000>;
+				reg = <0x10014 0x14>;
+			};
+
+			gpio: gpio@20000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x20000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg-io-width = <4>;
+
+				banka: gpio-controller@0 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <8>;
+
+					regoffset-dat = <0x50>;
+					regoffset-set = <0x00>;
+					regoffset-dirout = <0x04>;
+				};
+
+				bankb: gpio-controller@1 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <16>;
+
+					regoffset-dat = <0x54>;
+					regoffset-set = <0x0c>;
+					regoffset-dirout = <0x10>;
+				};
+
+				bankd: gpio-controller@2 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <30>;
+
+					regoffset-dat = <0x5c>;
+					regoffset-set = <0x24>;
+					regoffset-dirout = <0x28>;
+				};
+			};
+
+			uart0: uart@30000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x30000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <10>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			uart1: uart@40000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x40000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <9>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			wdog: watchdog@50000 {
+				compatible = "snps,dw-apb-wdg";
+				reg = <0x50000 0x10000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <11>;
+				bus-clock = <&pclk>, "bus";
+			};
+
+			timer2: timer@60000 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <6>;
+				clock-freq = <200000000>;
+				reg = <0x60000 0x14>;
+			};
+
+			timer3: timer@60014 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <7>;
+				clock-freq = <200000000>;
+				reg = <0x60014 0x14>;
+			};
+		};
+	};
+
+	rwid-axi {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		ebi@50000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40000000 0x08000000
+				  1 0 0x48000000 0x08000000
+				  2 0 0x50000000 0x08000000
+				  3 0 0x58000000 0x08000000>;
+		};
+
+		axi2pico@c0000000 {
+			compatible = "picochip,axi2pico-pc3x3";
+			reg = <0xc0000000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <13 14 15 16 17 18 19 20 21>;
+		};
+
+		otp@ffff8000 {
+			compatible = "picochip,otp-pc3x3";
+			reg = <0xffff8000 0x8000>;
+		};
+	};
+};

arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts

+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x2.dtsi"
+/ {
+	model = "Picochip PC7302 (PC3X2)";
+	compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	chosen {
+		linux,stdout-path = &uart0;
+	};
+
+	clocks {
+		ref_clk: clock@1 {
+			compatible = "fixed-clock";
+			clock-outputs = "ref";
+			clock-frequency = <20000000>;
+		};
+	};
+
+	rwid-axi {
+		ebi@50000000 {
+			nand: gpio-nand@2,0 {
+				compatible = "gpio-control-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <2 0x0000 0x1000>;
+				bus-clock = <&pclk>, "bus";
+				gpio-control-nand,io-sync-reg =
+					<0x00000000 0x80220000>;
+
+				gpios = <&banka 1 0	/* rdy */
+					 &banka 2 0 	/* nce */
+					 &banka 3 0 	/* ale */
+					 &banka 4 0 	/* cle */
+					 0		/* nwp */>;
+
+				boot@100000 {
+					label = "Boot";
+					reg = <0x100000 0x80000>;
+				};
+
+				redundant-boot@200000 {
+					label = "Redundant Boot";
+					reg = <0x200000 0x80000>;
+				};
+
+				boot-env@300000 {
+					label = "Boot Evironment";
+					reg = <0x300000 0x20000>;
+				};
+
+				redundant-boot-env@320000 {
+					label = "Redundant Boot Environment";
+					reg = <0x300000 0x20000>;
+				};
+
+				kernel@380000 {
+					label = "Kernel";
+					reg = <0x380000 0x800000>;
+				};
+
+				fs@b80000 {
+					label = "File System";
+					reg = <0xb80000 0xf480000>;
+				};
+			};
+		};
+	};
+};

arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts

+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x3.dtsi"
+/ {
+	model = "Picochip PC7302 (PC3X3)";
+	compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	chosen {
+		linux,stdout-path = &uart0;
+	};
+
+	clocks {
+		ref_clk: clock@10 {
+			compatible = "fixed-clock";
+			clock-outputs = "ref";
+			clock-frequency = <20000000>;
+		};
+
+		clkgate: clkgate@800a0048 {
+			clock@4 {
+				picochip,clk-no-disable;
+			};
+		};
+	};
+
+	rwid-axi {
+		ebi@50000000 {
+			nand: gpio-nand@2,0 {
+				compatible = "gpio-control-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <2 0x0000 0x1000>;
+				bus-clock = <&ebi_clk>, "bus";
+				gpio-control-nand,io-sync-reg =
+					<0x00000000 0x80220000>;
+
+				gpios = <&banka 1 0	/* rdy */
+					 &banka 2 0 	/* nce */
+					 &banka 3 0 	/* ale */
+					 &banka 4 0 	/* cle */
+					 0		/* nwp */>;
+
+				boot@100000 {
+					label = "Boot";
+					reg = <0x100000 0x80000>;
+				};
+
+				redundant-boot@200000 {
+					label = "Redundant Boot";
+					reg = <0x200000 0x80000>;
+				};
+
+				boot-env@300000 {
+					label = "Boot Evironment";
+					reg = <0x300000 0x20000>;
+				};
+
+				redundant-boot-env@320000 {
+					label = "Redundant Boot Environment";
+					reg = <0x300000 0x20000>;
+				};
+
+				kernel@380000 {
+					label = "Kernel";
+					reg = <0x380000 0x800000>;
+				};
+
+				fs@b80000 {
+					label = "File System";
+					reg = <0xb80000 0xf480000>;
+				};
+			};
+		};
+	};
+};

arch/arm/include/asm/hardware/cache-l2x0.h

@@ -102,7 +102,14 @@
 
 #ifndef __ASSEMBLY__
 extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
+#if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF)
 extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask);
+#else
+static inline int l2x0_of_init(__u32 aux_val, __u32 aux_mask)
+{
+	return -ENODEV;
+}
+#endif
 
 struct l2x0_regs {
 	unsigned long phy_base;
@@ -121,6 +128,6 @@ struct l2x0_regs {
 
 extern struct l2x0_regs l2x0_saved_regs;
 
-#endif
+#endif /* __ASSEMBLY__ */
 
 #endif

arch/arm/mach-highbank/Makefile

+obj-y					:= clock.o highbank.o system.o
+obj-$(CONFIG_DEBUG_HIGHBANK_UART)	+= lluart.o
+obj-$(CONFIG_SMP)			+= platsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
+obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
+obj-$(CONFIG_PM_SLEEP)			+= pm.o

arch/arm/mach-highbank/Makefile.boot

+zreladdr-y	:= 0x00008000

arch/arm/mach-highbank/clock.c

+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+
+struct clk {
+	unsigned long rate;
+};
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+
+void clk_disable(struct clk *clk)
+{}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+
+static struct clk eclk = { .rate = 200000000 };
+static struct clk pclk = { .rate = 150000000 };
+
+static struct clk_lookup lookups[] = {
+	{ .clk = &pclk, .con_id = "apb_pclk", },
+	{ .clk = &pclk, .dev_id = "sp804", },
+	{ .clk = &eclk, .dev_id = "ffe0e000.sdhci", },
+	{ .clk = &pclk, .dev_id = "fff36000.serial", },
+};
+
+void __init highbank_clocks_init(void)
+{
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+}

arch/arm/mach-highbank/core.h

+extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
+extern void highbank_clocks_init(void);
+extern void __iomem *scu_base_addr;
+#ifdef CONFIG_DEBUG_HIGHBANK_UART
+extern void highbank_lluart_map_io(void);
+#else
+static inline void highbank_lluart_map_io(void) {}
+#endif
+

arch/arm/mach-highbank/highbank.c

+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/unified.h>
+#include <asm/smp_scu.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/timer-sp.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+void __iomem *sregs_base;
+
+#define HB_SCU_VIRT_BASE	0xfee00000
+void __iomem *scu_base_addr = ((void __iomem *)(HB_SCU_VIRT_BASE));
+
+static struct map_desc scu_io_desc __initdata = {
+	.virtual	= HB_SCU_VIRT_BASE,
+	.pfn		= 0, /* run-time */
+	.length		= SZ_4K,
+	.type		= MT_DEVICE,
+};
+
+static void __init highbank_scu_map_io(void)
+{
+	unsigned long base;
+
+	/* Get SCU base */
+	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+	scu_io_desc.pfn = __phys_to_pfn(base);
+	iotable_init(&scu_io_desc, 1);
+}
+
+static void __init highbank_map_io(void)
+{
+	highbank_scu_map_io();
+	highbank_lluart_map_io();
+}
+
+#define HB_JUMP_TABLE_PHYS(cpu)		(0x40 + (0x10 * (cpu)))
+#define HB_JUMP_TABLE_VIRT(cpu)		phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
+
+void highbank_set_cpu_jump(int cpu, void *jump_addr)
+{
+	writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
+	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
+	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
+			  HB_JUMP_TABLE_PHYS(cpu) + 15);
+}
+
+const static struct of_device_id irq_match[] = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{}
+};
+
+static void __init highbank_init_irq(void)
+{
+	of_irq_init(irq_match);
+	l2x0_of_init(0, ~0UL);
+}
+
+static void __init highbank_timer_init(void)
+{
+	int irq;
+	struct device_node *np;
+	void __iomem *timer_base;
+
+	/* Map system registers */
+	np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+	sregs_base = of_iomap(np, 0);
+	WARN_ON(!sregs_base);
+
+	np = of_find_compatible_node(NULL, NULL, "arm,sp804");
+	timer_base = of_iomap(np, 0);
+	WARN_ON(!timer_base);
+	irq = irq_of_parse_and_map(np, 0);
+
+	highbank_clocks_init();
+
+	sp804_clocksource_init(timer_base + 0x20, "timer1");
+	sp804_clockevents_init(timer_base, irq, "timer0");
+}
+
+static struct sys_timer highbank_timer = {
+	.init = highbank_timer_init,
+};
+
+static void highbank_power_off(void)
+{
+	hignbank_set_pwr_shutdown();
+	scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+
+	while (1)
+		cpu_do_idle();
+}
+
+static void __init highbank_init(void)
+{
+	pm_power_off = highbank_power_off;
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *highbank_match[] __initconst = {
+	"calxeda,highbank",
+	NULL,
+};
+
+DT_MACHINE_START(HIGHBANK, "Highbank")
+	.map_io		= highbank_map_io,
+	.init_irq	= highbank_init_irq,
+	.timer		= &highbank_timer,
+	.init_machine	= highbank_init,
+	.dt_compat	= highbank_match,
+MACHINE_END

arch/arm/mach-highbank/hotplug.c

+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+
+#include "core.h"
+
+extern void secondary_startup(void);
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+	flush_cache_all();
+
+	highbank_set_cpu_jump(cpu, secondary_startup);
+	scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+
+	cpu_do_idle();
+
+	/* We should never return from idle */
+	panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * CPU0 should not be shut down via hotplug.  cpu_idle can WFI
+	 * or a proper shutdown or hibernate should be used.
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}

arch/arm/mach-highbank/include/mach/debug-macro.S

+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	addruart,rp,rv,tmp
+		movw	\rv, #0x6000
+		movt	\rv, #0xfee3
+		movw	\rp, #0x6000
+		movt	\rp, #0xfff3
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>

arch/arm/mach-highbank/include/mach/entry-macro.S

+#include <asm/hardware/entry-macro-gic.S>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm

arch/arm/mach-highbank/include/mach/gpio.h

+/* empty */

arch/arm/mach-highbank/include/mach/io.h

+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define __io(a)		({ (void)(a); __typesafe_io(0); })
+#define __mem_pci(a)	(a)
+
+#endif

arch/arm/mach-highbank/include/mach/irqs.h

+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define NR_IRQS			192
+
+#endif

arch/arm/mach-highbank/include/mach/memory.h

+/* empty */

arch/arm/mach-highbank/include/mach/system.h

+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+extern void arch_reset(char mode, const char *cmd);
+
+#endif

arch/arm/mach-highbank/include/mach/timex.h

+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#define CLOCK_TICK_RATE		1000000
+
+#endif

arch/arm/mach-highbank/include/mach/uncompress.h

+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#define putc(c)
+#define flush()
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif

arch/arm/mach-highbank/include/mach/vmalloc.h

+#define VMALLOC_END		0xFEE00000UL

arch/arm/mach-highbank/lluart.c

+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <asm/mach/map.h>
+
+#define HB_DEBUG_LL_PHYS_BASE	0xfff36000
+#define HB_DEBUG_LL_VIRT_BASE	0xfee36000
+
+static struct map_desc lluart_io_desc __initdata = {
+	.virtual	= HB_DEBUG_LL_VIRT_BASE,
+	.pfn		= __phys_to_pfn(HB_DEBUG_LL_PHYS_BASE),
+	.length		= SZ_4K,
+	.type		= MT_DEVICE,
+};
+
+void __init highbank_lluart_map_io(void)
+{
+	iotable_init(&lluart_io_desc, 1);
+}

arch/arm/mach-highbank/localtimer.c

+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ * Based on localtimer.c, Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/smp_twd.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
+	if (!twd_base) {
+		twd_base = of_iomap(np, 0);
+		WARN_ON(!twd_base);
+	}
+	evt->irq = irq_of_parse_and_map(np, 0);
+	twd_timer_setup(evt);
+	return 0;
+}

arch/arm/mach-highbank/platsmp.c

+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/smp_scu.h>
+#include <asm/hardware/gic.h>
+
+#include "core.h"
+
+extern void secondary_startup(void);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	gic_secondary_init(0);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	gic_raise_softirq(cpumask_of(cpu), 0);
+	return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores;
+
+	ncores = scu_get_core_count(scu_base_addr);
+
+	/* sanity check */
+	if (ncores > NR_CPUS) {
+		printk(KERN_WARNING
+		       "highbank: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+
+	set_smp_cross_call(gic_raise_softirq);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+	int i;
+
+	scu_enable(scu_base_addr);
+
+	/*
+	 * Write the address of secondary startup into the jump table
+	 * The cores are in wfi and wait until they receive a soft interrupt
+	 * and a non-zero value to jump to. Then the secondary CPU branches
+	 * to this address.
+	 */
+	for (i = 1; i < max_cpus; i++)
+		highbank_set_cpu_jump(i, secondary_startup);
+}

arch/arm/mach-highbank/pm.c

+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
+
+#include <asm/proc-fns.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+static int highbank_suspend_finish(unsigned long val)
+{
+	cpu_do_idle();
+	return 0;
+}
+
+static int highbank_pm_enter(suspend_state_t state)
+{
+	hignbank_set_pwr_suspend();
+	highbank_set_cpu_jump(0, cpu_resume);
+
+	scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+	cpu_suspend(0, highbank_suspend_finish);
+
+	return 0;
+}
+
+static const struct platform_suspend_ops highbank_pm_ops = {
+	.enter = highbank_pm_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+static int __init highbank_pm_init(void)
+{
+	suspend_set_ops(&highbank_pm_ops);
+	return 0;
+}
+module_init(highbank_pm_init);

arch/arm/mach-highbank/sysregs.h

+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _MACH_HIGHBANK__SYSREGS_H_
+#define _MACH_HIGHBANK__SYSREGS_H_
+
+#include <linux/io.h>
+
+extern void __iomem *sregs_base;
+
+#define HB_SREG_A9_PWR_REQ		0xf00
+#define HB_SREG_A9_BOOT_STAT		0xf04
+#define HB_SREG_A9_BOOT_DATA		0xf08
+
+#define HB_PWR_SUSPEND			0
+#define HB_PWR_SOFT_RESET		1
+#define HB_PWR_HARD_RESET		2
+#define HB_PWR_SHUTDOWN			3
+
+static inline void hignbank_set_pwr_suspend(void)
+{
+	writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_shutdown(void)
+{
+	writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_soft_reset(void)
+{
+	writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_hard_reset(void)
+{
+	writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+#endif

arch/arm/mach-highbank/system.c

+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/io.h>
+#include <asm/smp_scu.h>
+#include <asm/proc-fns.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+void arch_reset(char mode, const char *cmd)
+{
+	if (mode == 'h')
+		hignbank_set_pwr_hard_reset();
+	else
+		hignbank_set_pwr_soft_reset();
+
+	scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+	cpu_do_idle();
+}
+

arch/arm/mach-imx/Kconfig

 config IMX_HAVE_DMA_V1
 	bool
+
+config HAVE_IMX_GPC
+	bool
+
+config HAVE_IMX_MMDC
+	bool
+
+config HAVE_IMX_SRC
+	bool
+
 #
 # ARCH_MX31 and ARCH_MX35 are left for compatibility
 # Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
@@ -64,6 +74,7 @@ config SOC_IMX31
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_MX31
 	select MXC_AVIC
+	select SMP_ON_UP if SMP
 
 config SOC_IMX35
 	bool
@@ -73,6 +84,7 @@ config SOC_IMX35
 	select HAVE_EPIT
 	select ARCH_MX35
 	select MXC_AVIC
+	select SMP_ON_UP if SMP
 
 
 if ARCH_IMX_V4_V5
@@ -341,7 +353,7 @@ config MACH_IMX27IPCAM
 
 endif
 
-if ARCH_MX3
+if ARCH_IMX_V6_V7
 
 comment "MX31 platforms:"
 
@@ -592,4 +604,20 @@ config MACH_VPR200
 	  Include support for VPR200 platform. This includes specific
 	  configurations for the board and its peripherals.
 
+comment "i.MX6 family:"
+
+config SOC_IMX6Q
+	bool "i.MX6 Quad support"
+	select ARM_GIC
+	select CACHE_L2X0
+	select CPU_V7
+	select HAVE_ARM_SCU
+	select HAVE_IMX_GPC
+	select HAVE_IMX_MMDC
+	select HAVE_IMX_SRC
+	select USE_OF
+
+	help
+	  This enables support for Freescale i.MX6 Quad processor.
+
 endif

arch/arm/mach-imx/Makefile

@@ -60,3 +60,14 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
 obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
+
+obj-$(CONFIG_DEBUG_LL) += lluart.o
+obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
+obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
+obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+obj-$(CONFIG_CPU_V7) += head-v7.o
+AFLAGS_head-v7.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
+obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o

arch/arm/mach-imx/Makefile.boot

@@ -17,3 +17,7 @@ initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
 zreladdr-$(CONFIG_ARCH_MX3)	+= 0x80008000
 params_phys-$(CONFIG_ARCH_MX3)	:= 0x80000100
 initrd_phys-$(CONFIG_ARCH_MX3)	:= 0x80800000
+
+zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
+params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
+initrd_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10800000

arch/arm/mach-imx/gpc.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/hardware/gic.h>
+
+#define GPC_IMR1		0x008
+#define GPC_PGC_CPU_PDN		0x2a0
+
+#define IMR_NUM			4
+
+static void __iomem *gpc_base;
+static u32 gpc_wake_irqs[IMR_NUM];
+static u32 gpc_saved_imrs[IMR_NUM];
+
+void imx_gpc_pre_suspend(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	/* Tell GPC to power off ARM core when suspend */
+	writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
+
+	for (i = 0; i < IMR_NUM; i++) {
+		gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
+		writel_relaxed(~gpc_wake_irqs[i], reg_imr1 + i * 4);
+	}
+}
+
+void imx_gpc_post_resume(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	/* Keep ARM core powered on for other low-power modes */
+	writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN);
+
+	for (i = 0; i < IMR_NUM; i++)
+		writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
+}
+
+static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+	unsigned int idx = d->irq / 32 - 1;
+	u32 mask;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return -EINVAL;
+
+	mask = 1 << d->irq % 32;
+	gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
+				  gpc_wake_irqs[idx] & ~mask;
+
+	return 0;
+}
+
+static void imx_gpc_irq_unmask(struct irq_data *d)
+{
+	void __iomem *reg;
+	u32 val;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return;
+
+	reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+	val = readl_relaxed(reg);
+	val &= ~(1 << d->irq % 32);
+	writel_relaxed(val, reg);
+}
+
+static void imx_gpc_irq_mask(struct irq_data *d)
+{
+	void __iomem *reg;
+	u32 val;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return;
+
+	reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+	val = readl_relaxed(reg);
+	val |= 1 << (d->irq % 32);
+	writel_relaxed(val, reg);
+}
+
+void __init imx_gpc_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
+	gpc_base = of_iomap(np, 0);
+	WARN_ON(!gpc_base);
+
+	/* Register GPC as the secondary interrupt controller behind GIC */
+	gic_arch_extn.irq_mask = imx_gpc_irq_mask;
+	gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
+	gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
+}

arch/arm/mach-imx/head-v7.S

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+	.section ".text.head", "ax"
+	__CPUINIT
+
+/*
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor.  We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures.  Ideally, it should be moved into arch/arm/mm/cache-v7.S.
+ */
+ENTRY(v7_invalidate_l1)
+	mov	r0, #0
+	mcr	p15, 2, r0, c0, c0, 0
+	mrc	p15, 1, r0, c0, c0, 0
+
+	ldr	r1, =0x7fff
+	and	r2, r1, r0, lsr #13
+
+	ldr	r1, =0x3ff
+
+	and	r3, r1, r0, lsr #3	@ NumWays - 1
+	add	r2, r2, #1		@ NumSets
+
+	and	r0, r0, #0x7
+	add	r0, r0, #4	@ SetShift
+
+	clz	r1, r3		@ WayShift
+	add	r4, r3, #1	@ NumWays
+1:	sub	r2, r2, #1	@ NumSets--
+	mov	r3, r4		@ Temp = NumWays
+2:	subs	r3, r3, #1	@ Temp--
+	mov	r5, r3, lsl r1
+	mov	r6, r2, lsl r0
+	orr	r5, r5, r6	@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+	mcr	p15, 0, r5, c7, c6, 2
+	bgt	2b
+	cmp	r2, #0
+	bgt	1b
+	dsb
+	isb
+	mov	pc, lr
+ENDPROC(v7_invalidate_l1)
+
+#ifdef CONFIG_SMP
+ENTRY(v7_secondary_startup)
+	bl	v7_invalidate_l1
+	b	secondary_startup
+ENDPROC(v7_secondary_startup)
+#endif
+
+/*
+ * The following code is located into the .data section.  This is to
+ * allow phys_l2x0_saved_regs to be accessed with a relative load
+ * as we are running on physical address here.
+ */
+	.data
+	.align
+
+	.macro	pl310_resume
+	ldr	r2, phys_l2x0_saved_regs
+	ldr	r0, [r2, #L2X0_R_PHY_BASE]	@ get physical base of l2x0
+	ldr	r1, [r2, #L2X0_R_AUX_CTRL]	@ get aux_ctrl value
+	str	r1, [r0, #L2X0_AUX_CTRL]	@ restore aux_ctrl
+	mov	r1, #0x1
+	str	r1, [r0, #L2X0_CTRL]		@ re-enable L2
+	.endm
+
+ENTRY(v7_cpu_resume)
+	bl	v7_invalidate_l1
+	pl310_resume
+	b	cpu_resume
+ENDPROC(v7_cpu_resume)
+
+	.globl	phys_l2x0_saved_regs
+phys_l2x0_saved_regs:
+        .long   0

arch/arm/mach-imx/hotplug.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/errno.h>
+#include <asm/cacheflush.h>
+#include <mach/common.h>
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+	flush_cache_all();
+	imx_enable_cpu(cpu, false);
+	cpu_do_idle();
+
+	/* We should never return from idle */
+	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}

arch/arm/mach-imx/lluart.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+static struct map_desc imx_lluart_desc = {
+#ifdef CONFIG_DEBUG_IMX6Q_UART
+	.virtual	= MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
+	.pfn		= __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
+	.length		= MX6Q_UART4_SIZE,
+	.type		= MT_DEVICE,
+#endif
+};
+
+void __init imx_lluart_map_io(void)
+{
+	if (imx_lluart_desc.virtual)
+		iotable_init(&imx_lluart_desc, 1);
+}

arch/arm/mach-imx/localtimer.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/smp_twd.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
+	if (!twd_base) {
+		twd_base = of_iomap(np, 0);
+		WARN_ON(!twd_base);
+	}
+	evt->irq = irq_of_parse_and_map(np, 0);
+	twd_timer_setup(evt);
+
+	return 0;
+}

arch/arm/mach-imx/mach-imx6q.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static void __init imx6q_init_machine(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	imx6q_pm_init();
+}
+
+static void __init imx6q_map_io(void)
+{
+	imx_lluart_map_io();
+	imx_scu_map_io();
+}
+
+static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
+				struct device_node *interrupt_parent)
+{
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+				   32 * 7; /* imx6q gets 7 gpio ports */
+
+	irq_domain_add_simple(np, gpio_irq_base);
+	gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx6q_irq_match[] __initconst = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{ .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, },
+	{ /* sentinel */ }
+};
+
+static void __init imx6q_init_irq(void)
+{
+	l2x0_of_init(0, ~0UL);
+	imx_src_init();
+	imx_gpc_init();
+	of_irq_init(imx6q_irq_match);
+}
+
+static void __init imx6q_timer_init(void)
+{
+	mx6q_clocks_init();
+}
+
+static struct sys_timer imx6q_timer = {
+	.init = imx6q_timer_init,
+};
+
+static const char *imx6q_dt_compat[] __initdata = {
+	"fsl,imx6q-sabreauto",
+	NULL,
+};
+
+DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+	.map_io		= imx6q_map_io,
+	.init_irq	= imx6q_init_irq,
+	.handle_irq	= imx6q_handle_irq,
+	.timer		= &imx6q_timer,
+	.init_machine	= imx6q_init_machine,
+	.dt_compat	= imx6q_dt_compat,
+MACHINE_END

arch/arm/mach-omap2/board-generic.c

@@ -11,7 +11,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/io.h>
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>

arch/arm/mach-picoxcell/Makefile

+obj-y	:= common.o
+obj-y	+= time.o
+obj-y	+= io.o

arch/arm/mach-picoxcell/Makefile.boot

+zreladdr-y := 0x00008000

arch/arm/mach-picoxcell/common.h

+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#ifndef __PICOXCELL_COMMON_H__
+#define __PICOXCELL_COMMON_H__
+
+#include <asm/mach/time.h>
+
+extern struct sys_timer picoxcell_timer;
+extern void picoxcell_map_io(void);
+
+#endif /* __PICOXCELL_COMMON_H__ */

arch/arm/mach-picoxcell/include/mach/gpio.h

+/* empty */

arch/arm/mach-picoxcell/include/mach/memory.h

+/* empty */