Commit 9961530a authored by Magnus Damm's avatar Magnus Damm Committed by Jeff Garzik

smc911x: fix 16-bit I/O operations

This patch fixes the following issues related to 16-bit support:
 - Remove unused 16-bit PXA DMA implementation.
 - Remove unused SMC_inw() and SMC_outw() functions.
 - Fix 16-bit SMC_outl to use writew() instead of writel().
Signed-off-by: default avatarMagnus Damm <damm@igel.co.jp>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent f0000920
......@@ -50,19 +50,16 @@
*/
#if SMC_USE_16BIT
#define SMC_inw(a, r) readw((a) + (r))
#define SMC_inl(a, r) ((SMC_inw(a, r) & 0xFFFF)+(SMC_inw(a+2, r)<<16))
#define SMC_outw(v, a, r) writew(v, (a) + (r))
#define SMC_inl(a, r) (readw((a) + (r)) & 0xFFFF) + (readw((a) + (r) + 2) << 16))
#define SMC_outl(v, a, r) \
do{ \
writel(v & 0xFFFF, (a) + (r)); \
writel(v >> 16, (a) + (r) + 2); \
writew(v & 0xFFFF, (a) + (r)); \
writew(v >> 16, (a) + (r) + 2); \
} while (0)
#define SMC_insl(a, r, p, l) readsw((short*)((a) + (r)), p, l*2)
#define SMC_outsl(a, r, p, l) writesw((short*)((a) + (r)), p, l*2)
#elif SMC_USE_32BIT
#define SMC_inw(a, r) readw((a) + (r))
#define SMC_inl(a, r) readl((a) + (r))
#define SMC_outl(v, a, r) writel(v, (a) + (r))
#define SMC_insl(a, r, p, l) readsl((int*)((a) + (r)), p, l)
......@@ -132,34 +129,6 @@ smc_pxa_dma_insl(struct device *dev, u_long ioaddr, u_long physaddr,
}
#endif
#ifdef SMC_insw
#undef SMC_insw
#define SMC_insw(a, r, p, l) \
smc_pxa_dma_insw(lp->dev, a, lp->physaddr, r, lp->rxdma, p, l)
static inline void
smc_pxa_dma_insw(struct device *dev, u_long ioaddr, u_long physaddr,
int reg, int dma, u_char *buf, int len)
{
/* 64 bit alignment is required for memory to memory DMA */
while ((long)buf & 6) {
*((u16 *)buf) = SMC_inw(ioaddr, reg);
buf += 2;
len--;
}
len *= 2;
rx_dmabuf = dma_map_single(dev, buf, len, DMA_FROM_DEVICE);
rx_dmalen = len;
DCSR(dma) = DCSR_NODESC;
DTADR(dma) = rx_dmabuf;
DSADR(dma) = physaddr + reg;
DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
DCMD_WIDTH2 | DCMD_ENDIRQEN | (DCMD_LENGTH & rx_dmalen));
DCSR(dma) = DCSR_NODESC | DCSR_RUN;
}
#endif
#ifdef SMC_outsl
#undef SMC_outsl
#define SMC_outsl(a, r, p, l) \
......@@ -187,35 +156,6 @@ smc_pxa_dma_outsl(struct device *dev, u_long ioaddr, u_long physaddr,
DCSR(dma) = DCSR_NODESC | DCSR_RUN;
}
#endif
#ifdef SMC_outsw
#undef SMC_outsw
#define SMC_outsw(a, r, p, l) \
smc_pxa_dma_outsw(lp->dev, a, lp->physaddr, r, lp->txdma, p, l)
static inline void
smc_pxa_dma_outsw(struct device *dev, u_long ioaddr, u_long physaddr,
int reg, int dma, u_char *buf, int len)
{
/* 64 bit alignment is required for memory to memory DMA */
while ((long)buf & 6) {
SMC_outw(*((u16 *)buf), ioaddr, reg);
buf += 2;
len--;
}
len *= 2;
tx_dmabuf = dma_map_single(dev, buf, len, DMA_TO_DEVICE);
tx_dmalen = len;
DCSR(dma) = DCSR_NODESC;
DSADR(dma) = tx_dmabuf;
DTADR(dma) = physaddr + reg;
DCMD(dma) = (DCMD_INCSRCADDR | DCMD_BURST32 |
DCMD_WIDTH2 | DCMD_ENDIRQEN | (DCMD_LENGTH & tx_dmalen));
DCSR(dma) = DCSR_NODESC | DCSR_RUN;
}
#endif
#endif /* SMC_USE_PXA_DMA */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment