Commit 99efd1c9 authored by Ville Syrjälä's avatar Ville Syrjälä

drm/i915: Eliminate skl_check_pipe_max_pixel_rate()

The normal cdclk handling now takes care of making sure the
plane's pixel rate doesn't exceed the spec appointed percentage
of the cdclk frequency. Thus we can nuke
skl_check_pipe_max_pixel_rate().
Reviewed-by: default avatarJuha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015193035.25982-6-ville.syrjala@linux.intel.com
parent bb6ae9e6
......@@ -12121,8 +12121,6 @@ static int intel_crtc_atomic_check(struct intel_atomic_state *state,
if (INTEL_GEN(dev_priv) >= 9) {
if (mode_changed || crtc_state->update_pipe)
ret = skl_update_scaler_crtc(crtc_state);
if (!ret)
ret = skl_check_pipe_max_pixel_rate(crtc, crtc_state);
if (!ret)
ret = intel_atomic_setup_scalers(dev_priv, crtc,
crtc_state);
......
......@@ -4097,93 +4097,6 @@ skl_plane_downscale_amount(const struct intel_crtc_state *crtc_state,
return mul_fixed16(downscale_w, downscale_h);
}
static uint_fixed_16_16_t
skl_pipe_downscale_amount(const struct intel_crtc_state *crtc_state)
{
uint_fixed_16_16_t pipe_downscale = u32_to_fixed16(1);
if (!crtc_state->base.enable)
return pipe_downscale;
if (crtc_state->pch_pfit.enabled) {
u32 src_w, src_h, dst_w, dst_h;
u32 pfit_size = crtc_state->pch_pfit.size;
uint_fixed_16_16_t fp_w_ratio, fp_h_ratio;
uint_fixed_16_16_t downscale_h, downscale_w;
src_w = crtc_state->pipe_src_w;
src_h = crtc_state->pipe_src_h;
dst_w = pfit_size >> 16;
dst_h = pfit_size & 0xffff;
if (!dst_w || !dst_h)
return pipe_downscale;
fp_w_ratio = div_fixed16(src_w, dst_w);
fp_h_ratio = div_fixed16(src_h, dst_h);
downscale_w = max_fixed16(fp_w_ratio, u32_to_fixed16(1));
downscale_h = max_fixed16(fp_h_ratio, u32_to_fixed16(1));
pipe_downscale = mul_fixed16(downscale_w, downscale_h);
}
return pipe_downscale;
}
int skl_check_pipe_max_pixel_rate(struct intel_crtc *intel_crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
struct drm_atomic_state *state = crtc_state->base.state;
const struct intel_plane_state *plane_state;
struct intel_plane *plane;
int crtc_clock, dotclk;
u32 pipe_max_pixel_rate;
uint_fixed_16_16_t pipe_downscale;
uint_fixed_16_16_t max_downscale = u32_to_fixed16(1);
if (!crtc_state->base.enable)
return 0;
intel_atomic_crtc_state_for_each_plane_state(plane, plane_state, crtc_state) {
uint_fixed_16_16_t plane_downscale;
uint_fixed_16_16_t fp_9_div_8 = div_fixed16(9, 8);
int bpp;
if (!intel_wm_plane_visible(crtc_state, plane_state))
continue;
if (WARN_ON(!plane_state->base.fb))
return -EINVAL;
plane_downscale = skl_plane_downscale_amount(crtc_state, plane_state);
bpp = plane_state->base.fb->format->cpp[0] * 8;
if (bpp == 64)
plane_downscale = mul_fixed16(plane_downscale,
fp_9_div_8);
max_downscale = max_fixed16(plane_downscale, max_downscale);
}
pipe_downscale = skl_pipe_downscale_amount(crtc_state);
pipe_downscale = mul_fixed16(pipe_downscale, max_downscale);
crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
dotclk = to_intel_atomic_state(state)->cdclk.logical.cdclk;
if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10)
dotclk *= 2;
pipe_max_pixel_rate = div_round_up_u32_fixed16(dotclk, pipe_downscale);
if (pipe_max_pixel_rate < crtc_clock) {
DRM_DEBUG_KMS("Max supported pixel clock with scaling exceeded\n");
return -EINVAL;
}
return 0;
}
static u64
skl_plane_relative_data_rate(const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state,
......
......@@ -64,8 +64,6 @@ void skl_write_plane_wm(struct intel_plane *plane,
void skl_write_cursor_wm(struct intel_plane *plane,
const struct intel_crtc_state *crtc_state);
bool ilk_disable_lp_wm(struct drm_device *dev);
int skl_check_pipe_max_pixel_rate(struct intel_crtc *intel_crtc,
struct intel_crtc_state *cstate);
void intel_init_ipc(struct drm_i915_private *dev_priv);
void intel_enable_ipc(struct drm_i915_private *dev_priv);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment