mmc: mmci: add variant property to define dpsm bit

This patch adds datactrl variant property to define
dpsm enable bit. Needed to support the STM32 variant
(STM32 has no dpsm enable bit).
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/mmci.c

@@ -62,6 +62,7 @@ static struct variant_data variant_arm = {
 	.cmdreg_srsp		= MCI_CPSM_RESPONSE,
 	.datalength_bits	= 16,
 	.datactrl_blocksz	= 11,
+	.datactrl_dpsm_enable	= MCI_DPSM_ENABLE,
 	.pwrreg_powerup		= MCI_PWR_UP,
 	.f_max			= 100000000,
 	.reversed_irq_handling	= true,
@@ -80,6 +81,7 @@ static struct variant_data variant_arm_extended_fifo = {
 	.cmdreg_srsp		= MCI_CPSM_RESPONSE,
 	.datalength_bits	= 16,
 	.datactrl_blocksz	= 11,
+	.datactrl_dpsm_enable	= MCI_DPSM_ENABLE,
 	.pwrreg_powerup		= MCI_PWR_UP,
 	.f_max			= 100000000,
 	.mmcimask1		= true,
@@ -98,6 +100,7 @@ static struct variant_data variant_arm_extended_fifo_hwfc = {
 	.cmdreg_srsp		= MCI_CPSM_RESPONSE,
 	.datalength_bits	= 16,
 	.datactrl_blocksz	= 11,
+	.datactrl_dpsm_enable	= MCI_DPSM_ENABLE,
 	.pwrreg_powerup		= MCI_PWR_UP,
 	.f_max			= 100000000,
 	.mmcimask1		= true,
@@ -117,6 +120,7 @@ static struct variant_data variant_u300 = {
 	.cmdreg_srsp		= MCI_CPSM_RESPONSE,
 	.datalength_bits	= 16,
 	.datactrl_blocksz	= 11,
+	.datactrl_dpsm_enable	= MCI_DPSM_ENABLE,
 	.datactrl_mask_sdio	= MCI_DPSM_ST_SDIOEN,
 	.st_sdio			= true,
 	.pwrreg_powerup		= MCI_PWR_ON,
@@ -141,6 +145,7 @@ static struct variant_data variant_nomadik = {
 	.cmdreg_srsp		= MCI_CPSM_RESPONSE,
 	.datalength_bits	= 24,
 	.datactrl_blocksz	= 11,
+	.datactrl_dpsm_enable	= MCI_DPSM_ENABLE,
 	.datactrl_mask_sdio	= MCI_DPSM_ST_SDIOEN,
 	.st_sdio		= true,
 	.st_clkdiv		= true,
@@ -168,6 +173,7 @@ static struct variant_data variant_ux500 = {
 	.cmdreg_srsp		= MCI_CPSM_RESPONSE,
 	.datalength_bits	= 24,
 	.datactrl_blocksz	= 11,
+	.datactrl_dpsm_enable	= MCI_DPSM_ENABLE,
 	.datactrl_mask_sdio	= MCI_DPSM_ST_SDIOEN,
 	.st_sdio		= true,
 	.st_clkdiv		= true,
@@ -200,6 +206,7 @@ static struct variant_data variant_ux500v2 = {
 	.datactrl_mask_ddrmode	= MCI_DPSM_ST_DDRMODE,
 	.datalength_bits	= 24,
 	.datactrl_blocksz	= 11,
+	.datactrl_dpsm_enable	= MCI_DPSM_ENABLE,
 	.datactrl_mask_sdio	= MCI_DPSM_ST_SDIOEN,
 	.st_sdio		= true,
 	.st_clkdiv		= true,
@@ -232,6 +239,7 @@ static struct variant_data variant_stm32 = {
 	.cmdreg_srsp		= MCI_CPSM_RESPONSE,
 	.datalength_bits	= 24,
 	.datactrl_blocksz	= 11,
+	.datactrl_dpsm_enable	= MCI_DPSM_ENABLE,
 	.datactrl_mask_sdio	= MCI_DPSM_ST_SDIOEN,
 	.st_sdio		= true,
 	.st_clkdiv		= true,
@@ -258,6 +266,7 @@ static struct variant_data variant_qcom = {
 	.blksz_datactrl4	= true,
 	.datalength_bits	= 24,
 	.datactrl_blocksz	= 11,
+	.datactrl_dpsm_enable	= MCI_DPSM_ENABLE,
 	.pwrreg_powerup		= MCI_PWR_UP,
 	.f_max			= 208000000,
 	.explicit_mclk_control	= true,
@@ -976,11 +985,11 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 	BUG_ON(1 << blksz_bits != data->blksz);
 
 	if (variant->blksz_datactrl16)
-		datactrl = MCI_DPSM_ENABLE | (data->blksz << 16);
+		datactrl = variant->datactrl_dpsm_enable | (data->blksz << 16);
 	else if (variant->blksz_datactrl4)
-		datactrl = MCI_DPSM_ENABLE | (data->blksz << 4);
+		datactrl = variant->datactrl_dpsm_enable | (data->blksz << 4);
 	else
-		datactrl = MCI_DPSM_ENABLE | blksz_bits << 4;
+		datactrl = variant->datactrl_dpsm_enable | blksz_bits << 4;
 
 	if (data->flags & MMC_DATA_READ)
 		datactrl |= MCI_DPSM_DIRECTION;

drivers/mmc/host/mmci.h

@@ -222,6 +222,7 @@ struct mmci_host;
  *		     register
  * @datactrl_mask_sdio: SDIO enable mask in datactrl register
  * @datactrl_blksz: block size in power of two
+ * @datactrl_dpsm_enable: enable value for DPSM
  * @pwrreg_powerup: power up value for MMCIPOWER register
  * @f_max: maximum clk frequency supported by the controller.
  * @signal_direction: input/out direction of bus signals can be indicated
@@ -258,6 +259,7 @@ struct variant_data {
 	unsigned int		datactrl_mask_ddrmode;
 	unsigned int		datactrl_mask_sdio;
 	unsigned int		datactrl_blocksz;
+	unsigned int		datactrl_dpsm_enable;
 	u8			st_sdio:1;
 	u8			st_clkdiv:1;
 	u8			blksz_datactrl16:1;