ARM: dts: am3/am4/dra7/omap: Remove leading 0x and 0s from bindings notation

Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have
leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have
leading 0s

Converted using the following command:

$ find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec \
sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" \
-e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C

For simplicity, two sed expressions were used to solve each warnings
separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before
the the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This will solve as a side effect warning:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format
error, expected "<lower>"

This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading
0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am33xx.dtsi

@@ -496,7 +496,7 @@ dcan1: can@481d0000 {
 			status = "disabled";
 		};
 
-		mailbox: mailbox@480C8000 {
+		mailbox: mailbox@480c8000 {
 			compatible = "ti,omap4-mailbox";
 			reg = <0x480C8000 0x200>;
 			interrupts = <77>;
@@ -991,7 +991,7 @@ mcasp0: mcasp@48038000 {
 			dma-names = "tx", "rx";
 		};
 
-		mcasp1: mcasp@4803C000 {
+		mcasp1: mcasp@4803c000 {
 			compatible = "ti,am33xx-mcasp-audio";
 			ti,hwmods = "mcasp1";
 			reg = <0x4803C000 0x2000>,

arch/arm/boot/dts/am3517.dtsi

@@ -26,7 +26,7 @@ am35x_otg_hs: am35x_otg_hs@5c040000 {
 			interrupt-names = "mc";
 		};
 
-		davinci_emac: ethernet@0x5c000000 {
+		davinci_emac: ethernet@5c000000 {
 			compatible = "ti,am3517-emac";
 			ti,hwmods = "davinci_emac";
 			status = "disabled";
@@ -41,7 +41,7 @@ davinci_emac: ethernet@0x5c000000 {
 			local-mac-address = [ 00 00 00 00 00 00 ];
 		};
 
-		davinci_mdio: ethernet@0x5c030000 {
+		davinci_mdio: ethernet@5c030000 {
 			compatible = "ti,davinci_mdio";
 			ti,hwmods = "davinci_mdio";
 			status = "disabled";

arch/arm/boot/dts/am4372.dtsi

@@ -325,7 +325,7 @@ uart5: serial@481aa000 {
 			status = "disabled";
 		};
 
-		mailbox: mailbox@480C8000 {
+		mailbox: mailbox@480c8000 {
 			compatible = "ti,omap4-mailbox";
 			reg = <0x480C8000 0x200>;
 			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -936,7 +936,7 @@ mcasp0: mcasp@48038000 {
 			dma-names = "tx", "rx";
 		};
 
-		mcasp1: mcasp@4803C000 {
+		mcasp1: mcasp@4803c000 {
 			compatible = "ti,am33xx-mcasp-audio";
 			ti,hwmods = "mcasp1";
 			reg = <0x4803C000 0x2000>,

arch/arm/boot/dts/dra62x-j5eco-evm.dts

@@ -74,19 +74,19 @@ partition@0 {
 			label = "X-Loader";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x80000 0x1c0000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x240000 0x40000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x280000 0x500000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x780000 0xf880000>;
 		};

arch/arm/boot/dts/dra7.dtsi

@@ -1373,7 +1373,7 @@ ocp2scp@4a090000 {
 			ranges;
 			reg = <0x4a090000 0x20>;
 			ti,hwmods = "ocp2scp3";
-			sata_phy: phy@4A096000 {
+			sata_phy: phy@4a096000 {
 				compatible = "ti,phy-pipe3-sata";
 				reg = <0x4A096000 0x80>, /* phy_rx */
 				      <0x4A096400 0x64>, /* phy_tx */

arch/arm/boot/dts/omap3-cm-t3x.dtsi

@@ -306,19 +306,19 @@ partition@0 {
 			label = "xloader";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "uboot";
 			reg = <0x80000 0x1e0000>;
 		};
-		partition@0x260000 {
+		partition@260000 {
 			label = "uboot environment";
 			reg = <0x260000 0x40000>;
 		};
-		partition@0x2a0000 {
+		partition@2a0000 {
 			label = "linux";
 			reg = <0x2a0000 0x400000>;
 		};
-		partition@0x6a0000 {
+		partition@6a0000 {
 			label = "rootfs";
 			reg = <0x6a0000 0x1f880000>;
 		};

arch/arm/boot/dts/omap3-evm-37xx.dts

@@ -90,19 +90,19 @@ partition@0 {
 			label = "X-Loader";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x80000 0x1c0000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x240000 0x40000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x280000 0x500000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x780000 0x1f880000>;
 		};

arch/arm/boot/dts/omap3-lilly-a83x.dtsi

@@ -405,22 +405,22 @@ partition@0 {
 			reg = <0 0x80000>;
 		};
 
-		partition@0x80000 {
+		partition@80000 {
 			label = "u-boot";
 			reg = <0x80000 0x1e0000>;
 		};
 
-		partition@0x260000 {
+		partition@260000 {
 			label = "u-boot-environment";
 			reg = <0x260000 0x20000>;
 		};
 
-		partition@0x280000 {
+		partition@280000 {
 			label = "kernel";
 			reg = <0x280000 0x500000>;
 		};
 
-		partition@0x780000 {
+		partition@780000 {
 			label = "filesystem";
 			reg = <0x780000 0xf880000>;
 		};