Commit 9c602713 authored by Vinod Koul's avatar Vinod Koul

Merge branch 'topic/stm' into for-linus

parents 2c852859 d83f4131
......@@ -13,6 +13,7 @@ Required properties:
- #dma-cells : Must be <4>. See DMA client paragraph for more details.
Optional properties:
- dma-requests : Number of DMA requests supported.
- resets: Reference to a reset controller asserting the DMA controller
- st,mem2mem: boolean; if defined, it indicates that the controller supports
memory-to-memory transfer
......@@ -34,12 +35,13 @@ Example:
#dma-cells = <4>;
st,mem2mem;
resets = <&rcc 150>;
dma-requests = <8>;
};
* DMA client
DMA clients connected to the STM32 DMA controller must use the format
described in the dma.txt file, using a five-cell specifier for each
described in the dma.txt file, using a four-cell specifier for each
channel: a phandle to the DMA controller plus the following four integer cells:
1. The channel id
......
STM32 DMA MUX (DMA request router)
Required properties:
- compatible: "st,stm32h7-dmamux"
- reg: Memory map for accessing module
- #dma-cells: Should be set to <3>.
First parameter is request line number.
Second is DMA channel configuration
Third is Fifo threshold
For more details about the three cells, please see
stm32-dma.txt documentation binding file
- dma-masters: Phandle pointing to the DMA controllers.
Several controllers are allowed. Only "st,stm32-dma" DMA
compatible are supported.
Optional properties:
- dma-channels : Number of DMA requests supported.
- dma-requests : Number of DMAMUX requests supported.
- resets: Reference to a reset controller asserting the DMA controller
- clocks: Input clock of the DMAMUX instance.
Example:
/* DMA controller 1 */
dma1: dma-controller@40020000 {
compatible = "st,stm32-dma";
reg = <0x40020000 0x400>;
interrupts = <11>,
<12>,
<13>,
<14>,
<15>,
<16>,
<17>,
<47>;
clocks = <&timer_clk>;
#dma-cells = <4>;
st,mem2mem;
resets = <&rcc 150>;
dma-channels = <8>;
dma-requests = <8>;
};
/* DMA controller 1 */
dma2: dma@40020400 {
compatible = "st,stm32-dma";
reg = <0x40020400 0x400>;
interrupts = <56>,
<57>,
<58>,
<59>,
<60>,
<68>,
<69>,
<70>;
clocks = <&timer_clk>;
#dma-cells = <4>;
st,mem2mem;
resets = <&rcc 150>;
dma-channels = <8>;
dma-requests = <8>;
};
/* DMA mux */
dmamux1: dma-router@40020800 {
compatible = "st,stm32h7-dmamux";
reg = <0x40020800 0x3c>;
#dma-cells = <3>;
dma-requests = <128>;
dma-channels = <16>;
dma-masters = <&dma1 &dma2>;
clocks = <&timer_clk>;
};
/* DMA client */
usart1: serial@40011000 {
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&timer_clk>;
dmas = <&dmamux1 41 0x414 0>,
<&dmamux1 42 0x414 0>;
dma-names = "rx", "tx";
};
* STMicroelectronics STM32 MDMA controller
The STM32 MDMA is a general-purpose direct memory access controller capable of
supporting 64 independent DMA channels with 256 HW requests.
Required properties:
- compatible: Should be "st,stm32h7-mdma"
- reg: Should contain MDMA registers location and length. This should include
all of the per-channel registers.
- interrupts: Should contain the MDMA interrupt.
- clocks: Should contain the input clock of the DMA instance.
- resets: Reference to a reset controller asserting the DMA controller.
- #dma-cells : Must be <5>. See DMA client paragraph for more details.
Optional properties:
- dma-channels: Number of DMA channels supported by the controller.
- dma-requests: Number of DMA request signals supported by the controller.
- st,ahb-addr-masks: Array of u32 mask to list memory devices addressed via
AHB bus.
Example:
mdma1: dma@52000000 {
compatible = "st,stm32h7-mdma";
reg = <0x52000000 0x1000>;
interrupts = <122>;
clocks = <&timer_clk>;
resets = <&rcc 992>;
#dma-cells = <5>;
dma-channels = <16>;
dma-requests = <32>;
st,ahb-addr-masks = <0x20000000>, <0x00000000>;
};
* DMA client
DMA clients connected to the STM32 MDMA controller must use the format
described in the dma.txt file, using a five-cell specifier for each channel:
a phandle to the MDMA controller plus the following five integer cells:
1. The request line number
2. The priority level
0x00: Low
0x01: Medium
0x10: High
0x11: Very high
3. A 32bit mask specifying the DMA channel configuration
-bit 0-1: Source increment mode
0x00: Source address pointer is fixed
0x10: Source address pointer is incremented after each data transfer
0x11: Source address pointer is decremented after each data transfer
-bit 2-3: Destination increment mode
0x00: Destination address pointer is fixed
0x10: Destination address pointer is incremented after each data
transfer
0x11: Destination address pointer is decremented after each data
transfer
-bit 8-9: Source increment offset size
0x00: byte (8bit)
0x01: half-word (16bit)
0x10: word (32bit)
0x11: double-word (64bit)
-bit 10-11: Destination increment offset size
0x00: byte (8bit)
0x01: half-word (16bit)
0x10: word (32bit)
0x11: double-word (64bit)
-bit 25-18: The number of bytes to be transferred in a single transfer
(min = 1 byte, max = 128 bytes)
-bit 29:28: Trigger Mode
0x00: Each MDMA request triggers a buffer transfer (max 128 bytes)
0x01: Each MDMA request triggers a block transfer (max 64K bytes)
0x10: Each MDMA request triggers a repeated block transfer
0x11: Each MDMA request triggers a linked list transfer
4. A 32bit value specifying the register to be used to acknowledge the request
if no HW ack signal is used by the MDMA client
5. A 32bit mask specifying the value to be written to acknowledge the request
if no HW ack signal is used by the MDMA client
Example:
i2c4: i2c@5c002000 {
compatible = "st,stm32f7-i2c";
reg = <0x5c002000 0x400>;
interrupts = <95>,
<96>;
clocks = <&timer_clk>;
#address-cells = <1>;
#size-cells = <0>;
dmas = <&mdma1 36 0x0 0x40008 0x0 0x0>,
<&mdma1 37 0x0 0x40002 0x0 0x0>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -483,6 +483,27 @@ config STM32_DMA
If you have a board based on such a MCU and wish to use DMA say Y
here.
config STM32_DMAMUX
bool "STMicroelectronics STM32 dma multiplexer support"
depends on STM32_DMA || COMPILE_TEST
help
Enable support for the on-chip DMA multiplexer on STMicroelectronics
STM32 MCUs.
If you have a board based on such a MCU and wish to use DMAMUX say Y
here.
config STM32_MDMA
bool "STMicroelectronics STM32 master dma support"
depends on ARCH_STM32 || COMPILE_TEST
depends on OF
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Enable support for the on-chip MDMA controller on STMicroelectronics
STM32 platforms.
If you have a board based on STM32 SoC and wish to use the master DMA
say Y here.
config S3C24XX_DMAC
bool "Samsung S3C24XX DMA support"
depends on ARCH_S3C24XX || COMPILE_TEST
......
......@@ -59,6 +59,8 @@ obj-$(CONFIG_RENESAS_DMA) += sh/
obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
obj-$(CONFIG_STM32_DMA) += stm32-dma.o
obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o
obj-$(CONFIG_STM32_MDMA) += stm32-mdma.o
obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
......
/*
*
* Copyright (C) STMicroelectronics SA 2017
* Author(s): M'boumba Cedric Madianga <cedric.madianga@gmail.com>
* Pierre-Yves Mordret <pierre-yves.mordret@st.com>
*
* License terms: GPL V2.0.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* DMA Router driver for STM32 DMA MUX
*
* Based on TI DMA Crossbar driver
*
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#define STM32_DMAMUX_CCR(x) (0x4 * (x))
#define STM32_DMAMUX_MAX_DMA_REQUESTS 32
#define STM32_DMAMUX_MAX_REQUESTS 255
struct stm32_dmamux {
u32 master;
u32 request;
u32 chan_id;
};
struct stm32_dmamux_data {
struct dma_router dmarouter;
struct clk *clk;
struct reset_control *rst;
void __iomem *iomem;
u32 dma_requests; /* Number of DMA requests connected to DMAMUX */
u32 dmamux_requests; /* Number of DMA requests routed toward DMAs */
spinlock_t lock; /* Protects register access */
unsigned long *dma_inuse; /* Used DMA channel */
u32 dma_reqs[]; /* Number of DMA Request per DMA masters.
* [0] holds number of DMA Masters.
* To be kept at very end end of this structure
*/
};
static inline u32 stm32_dmamux_read(void __iomem *iomem, u32 reg)
{
return readl_relaxed(iomem + reg);
}
static inline void stm32_dmamux_write(void __iomem *iomem, u32 reg, u32 val)
{
writel_relaxed(val, iomem + reg);
}
static void stm32_dmamux_free(struct device *dev, void *route_data)
{
struct stm32_dmamux_data *dmamux = dev_get_drvdata(dev);
struct stm32_dmamux *mux = route_data;
unsigned long flags;
/* Clear dma request */
spin_lock_irqsave(&dmamux->lock, flags);
stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id), 0);
clear_bit(mux->chan_id, dmamux->dma_inuse);
if (!IS_ERR(dmamux->clk))
clk_disable(dmamux->clk);
spin_unlock_irqrestore(&dmamux->lock, flags);
dev_dbg(dev, "Unmapping DMAMUX(%u) to DMA%u(%u)\n",
mux->request, mux->master, mux->chan_id);
kfree(mux);
}
static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
struct of_dma *ofdma)
{
struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
struct stm32_dmamux_data *dmamux = platform_get_drvdata(pdev);
struct stm32_dmamux *mux;
u32 i, min, max;
int ret;
unsigned long flags;
if (dma_spec->args_count != 3) {
dev_err(&pdev->dev, "invalid number of dma mux args\n");
return ERR_PTR(-EINVAL);
}
if (dma_spec->args[0] > dmamux->dmamux_requests) {
dev_err(&pdev->dev, "invalid mux request number: %d\n",
dma_spec->args[0]);
return ERR_PTR(-EINVAL);
}
mux = kzalloc(sizeof(*mux), GFP_KERNEL);
if (!mux)
return ERR_PTR(-ENOMEM);
spin_lock_irqsave(&dmamux->lock, flags);
mux->chan_id = find_first_zero_bit(dmamux->dma_inuse,
dmamux->dma_requests);
set_bit(mux->chan_id, dmamux->dma_inuse);
spin_unlock_irqrestore(&dmamux->lock, flags);
if (mux->chan_id == dmamux->dma_requests) {
dev_err(&pdev->dev, "Run out of free DMA requests\n");
ret = -ENOMEM;
goto error;
}
/* Look for DMA Master */
for (i = 1, min = 0, max = dmamux->dma_reqs[i];
i <= dmamux->dma_reqs[0];
min += dmamux->dma_reqs[i], max += dmamux->dma_reqs[++i])
if (mux->chan_id < max)
break;
mux->master = i - 1;
/* The of_node_put() will be done in of_dma_router_xlate function */
dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", i - 1);
if (!dma_spec->np) {
dev_err(&pdev->dev, "can't get dma master\n");
ret = -EINVAL;
goto error;
}
/* Set dma request */
spin_lock_irqsave(&dmamux->lock, flags);
if (!IS_ERR(dmamux->clk)) {
ret = clk_enable(dmamux->clk);
if (ret < 0) {
spin_unlock_irqrestore(&dmamux->lock, flags);
dev_err(&pdev->dev, "clk_prep_enable issue: %d\n", ret);
goto error;
}
}
spin_unlock_irqrestore(&dmamux->lock, flags);
mux->request = dma_spec->args[0];
/* craft DMA spec */
dma_spec->args[3] = dma_spec->args[2];
dma_spec->args[2] = dma_spec->args[1];
dma_spec->args[1] = 0;
dma_spec->args[0] = mux->chan_id - min;
dma_spec->args_count = 4;
stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id),
mux->request);
dev_dbg(&pdev->dev, "Mapping DMAMUX(%u) to DMA%u(%u)\n",
mux->request, mux->master, mux->chan_id);
return mux;
error:
clear_bit(mux->chan_id, dmamux->dma_inuse);
kfree(mux);
return ERR_PTR(ret);
}
static const struct of_device_id stm32_stm32dma_master_match[] = {
{ .compatible = "st,stm32-dma", },
{},
};
static int stm32_dmamux_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *match;
struct device_node *dma_node;
struct stm32_dmamux_data *stm32_dmamux;
struct resource *res;
void __iomem *iomem;
int i, count, ret;
u32 dma_req;
if (!node)
return -ENODEV;
count = device_property_read_u32_array(&pdev->dev, "dma-masters",
NULL, 0);
if (count < 0) {
dev_err(&pdev->dev, "Can't get DMA master(s) node\n");
return -ENODEV;
}
stm32_dmamux = devm_kzalloc(&pdev->dev, sizeof(*stm32_dmamux) +
sizeof(u32) * (count + 1), GFP_KERNEL);
if (!stm32_dmamux)
return -ENOMEM;
dma_req = 0;
for (i = 1; i <= count; i++) {
dma_node = of_parse_phandle(node, "dma-masters", i - 1);
match = of_match_node(stm32_stm32dma_master_match, dma_node);
if (!match) {
dev_err(&pdev->dev, "DMA master is not supported\n");
of_node_put(dma_node);
return -EINVAL;
}
if (of_property_read_u32(dma_node, "dma-requests",
&stm32_dmamux->dma_reqs[i])) {
dev_info(&pdev->dev,
"Missing MUX output information, using %u.\n",
STM32_DMAMUX_MAX_DMA_REQUESTS);
stm32_dmamux->dma_reqs[i] =
STM32_DMAMUX_MAX_DMA_REQUESTS;
}
dma_req += stm32_dmamux->dma_reqs[i];
of_node_put(dma_node);
}
if (dma_req > STM32_DMAMUX_MAX_DMA_REQUESTS) {
dev_err(&pdev->dev, "Too many DMA Master Requests to manage\n");
return -ENODEV;
}
stm32_dmamux->dma_requests = dma_req;
stm32_dmamux->dma_reqs[0] = count;
stm32_dmamux->dma_inuse = devm_kcalloc(&pdev->dev,
BITS_TO_LONGS(dma_req),
sizeof(unsigned long),
GFP_KERNEL);
if (!stm32_dmamux->dma_inuse)
return -ENOMEM;
if (device_property_read_u32(&pdev->dev, "dma-requests",
&stm32_dmamux->dmamux_requests)) {
stm32_dmamux->dmamux_requests = STM32_DMAMUX_MAX_REQUESTS;
dev_warn(&pdev->dev, "DMAMUX defaulting on %u requests\n",
stm32_dmamux->dmamux_requests);
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
iomem = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(iomem))
return PTR_ERR(iomem);
spin_lock_init(&stm32_dmamux->lock);
stm32_dmamux->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(stm32_dmamux->clk)) {
ret = PTR_ERR(stm32_dmamux->clk);
if (ret == -EPROBE_DEFER)
dev_info(&pdev->dev, "Missing controller clock\n");
return ret;
}
stm32_dmamux->rst = devm_reset_control_get(&pdev->dev, NULL);
if (!IS_ERR(stm32_dmamux->rst)) {
reset_control_assert(stm32_dmamux->rst);
udelay(2);
reset_control_deassert(stm32_dmamux->rst);
}
stm32_dmamux->iomem = iomem;
stm32_dmamux->dmarouter.dev = &pdev->dev;
stm32_dmamux->dmarouter.route_free = stm32_dmamux_free;
platform_set_drvdata(pdev, stm32_dmamux);
if (!IS_ERR(stm32_dmamux->clk)) {
ret = clk_prepare_enable(stm32_dmamux->clk);
if (ret < 0) {
dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
return ret;
}
}
/* Reset the dmamux */
for (i = 0; i < stm32_dmamux->dma_requests; i++)
stm32_dmamux_write(stm32_dmamux->iomem, STM32_DMAMUX_CCR(i), 0);
if (!IS_ERR(stm32_dmamux->clk))
clk_disable(stm32_dmamux->clk);
return of_dma_router_register(node, stm32_dmamux_route_allocate,
&stm32_dmamux->dmarouter);
}
static const struct of_device_id stm32_dmamux_match[] = {
{ .compatible = "st,stm32h7-dmamux" },
{},
};
static struct platform_driver stm32_dmamux_driver = {
.probe = stm32_dmamux_probe,
.driver = {
.name = "stm32-dmamux",
.of_match_table = stm32_dmamux_match,
},
};
static int __init stm32_dmamux_init(void)
{
return platform_driver_register(&stm32_dmamux_driver);
}
arch_initcall(stm32_dmamux_init);
MODULE_DESCRIPTION("DMA Router driver for STM32 DMA MUX");
MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
MODULE_AUTHOR("Pierre-Yves Mordret <pierre-yves.mordret@st.com>");
MODULE_LICENSE("GPL v2");
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment