Commit 9e14d0a5 authored by Gregory Herrero's avatar Gregory Herrero Committed by Felipe Balbi

usb: dwc2: gadget: add TEST_MODE feature support

Handle SET_FEATURE TEST_MODE request sent by the host.
Slightly rework FEATURE request handling to allow parsing
other request types than Endpoint.
Also add a debugfs to change test mode value from user space.
Tested-by: default avatarRobert Baldyga <r.baldyga@samsung.com>
Acked-by: default avatarJohn Youn <johnyoun@synopsys.com>
Signed-off-by: default avatarGregory Herrero <gregory.herrero@intel.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent c00dd4a6
......@@ -567,12 +567,14 @@ struct dwc2_hw_params {
* @num_of_eps: Number of available EPs (excluding EP0)
* @debug_root: Root directrory for debugfs.
* @debug_file: Main status file for debugfs.
* @debug_testmode: Testmode status file for debugfs.
* @debug_fifo: FIFO status file for debugfs.
* @ep0_reply: Request used for ep0 reply.
* @ep0_buff: Buffer for EP0 reply data, if needed.
* @ctrl_buff: Buffer for EP0 control requests.
* @ctrl_req: Request for EP0 control packets.
* @ep0_state: EP0 control transfers state
* @test_mode: USB test mode requested by the host
* @last_rst: Time of last reset
* @eps: The endpoints being supplied to the gadget framework
* @g_using_dma: Indicate if dma usage is enabled
......@@ -610,6 +612,7 @@ struct dwc2_hsotg {
struct dentry *debug_root;
struct dentry *debug_file;
struct dentry *debug_testmode;
struct dentry *debug_fifo;
/* DWC OTG HW Release versions */
......@@ -706,6 +709,7 @@ struct dwc2_hsotg {
void *ep0_buff;
void *ctrl_buff;
enum dwc2_ep0_state ep0_state;
u8 test_mode;
struct usb_gadget gadget;
unsigned int enabled:1;
......
......@@ -35,6 +35,7 @@
#include <linux/usb/gadget.h>
#include <linux/usb/phy.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/uaccess.h>
#include "core.h"
#include "hw.h"
......@@ -834,6 +835,32 @@ static struct s3c_hsotg_ep *ep_from_windex(struct dwc2_hsotg *hsotg,
return ep;
}
/**
* s3c_hsotg_set_test_mode - Enable usb Test Modes
* @hsotg: The driver state.
* @testmode: requested usb test mode
* Enable usb Test Mode requested by the Host.
*/
static int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode)
{
int dctl = readl(hsotg->regs + DCTL);
dctl &= ~DCTL_TSTCTL_MASK;
switch (testmode) {
case TEST_J:
case TEST_K:
case TEST_SE0_NAK:
case TEST_PACKET:
case TEST_FORCE_EN:
dctl |= testmode << DCTL_TSTCTL_SHIFT;
break;
default:
return -EINVAL;
}
writel(dctl, hsotg->regs + DCTL);
return 0;
}
/**
* s3c_hsotg_send_reply - send reply to control request
* @hsotg: The device state
......@@ -968,19 +995,48 @@ static int s3c_hsotg_process_req_feature(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *ep;
int ret;
bool halted;
u32 recip;
u32 wValue;
u32 wIndex;
dev_dbg(hsotg->dev, "%s: %s_FEATURE\n",
__func__, set ? "SET" : "CLEAR");
if (ctrl->bRequestType == USB_RECIP_ENDPOINT) {
ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex));
wValue = le16_to_cpu(ctrl->wValue);
wIndex = le16_to_cpu(ctrl->wIndex);
recip = ctrl->bRequestType & USB_RECIP_MASK;
switch (recip) {
case USB_RECIP_DEVICE:
switch (wValue) {
case USB_DEVICE_TEST_MODE:
if ((wIndex & 0xff) != 0)
return -EINVAL;
if (!set)
return -EINVAL;
hsotg->test_mode = wIndex >> 8;
ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
if (ret) {
dev_err(hsotg->dev,
"%s: failed to send reply\n", __func__);
return ret;
}
break;
default:
return -ENOENT;
}
break;
case USB_RECIP_ENDPOINT:
ep = ep_from_windex(hsotg, wIndex);
if (!ep) {
dev_dbg(hsotg->dev, "%s: no endpoint for 0x%04x\n",
__func__, le16_to_cpu(ctrl->wIndex));
__func__, wIndex);
return -ENOENT;
}
switch (le16_to_cpu(ctrl->wValue)) {
switch (wValue) {
case USB_ENDPOINT_HALT:
halted = ep->halted;
......@@ -1031,9 +1087,10 @@ static int s3c_hsotg_process_req_feature(struct dwc2_hsotg *hsotg,
default:
return -ENOENT;
}
} else
return -ENOENT; /* currently only deal with endpoint */
break;
default:
return -ENOENT;
}
return 1;
}
......@@ -1734,6 +1791,17 @@ static void s3c_hsotg_complete_in(struct dwc2_hsotg *hsotg,
if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_STATUS_IN) {
dev_dbg(hsotg->dev, "zlp packet sent\n");
s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
if (hsotg->test_mode) {
int ret;
ret = s3c_hsotg_set_test_mode(hsotg, hsotg->test_mode);
if (ret < 0) {
dev_dbg(hsotg->dev, "Invalid Test #%d\n",
hsotg->test_mode);
s3c_hsotg_stall_ep0(hsotg);
return;
}
}
s3c_hsotg_enqueue_setup(hsotg);
return;
}
......@@ -2045,6 +2113,7 @@ void s3c_hsotg_disconnect(struct dwc2_hsotg *hsotg)
return;
hsotg->connected = 0;
hsotg->test_mode = 0;
for (ep = 0; ep < hsotg->num_of_eps; ep++) {
if (hsotg->eps_in[ep])
......@@ -3256,6 +3325,103 @@ static void s3c_hsotg_dump(struct dwc2_hsotg *hsotg)
#endif
}
/**
* testmode_write - debugfs: change usb test mode
* @seq: The seq file to write to.
* @v: Unused parameter.
*
* This debugfs entry modify the current usb test mode.
*/
static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t
count, loff_t *ppos)
{
struct seq_file *s = file->private_data;
struct dwc2_hsotg *hsotg = s->private;
unsigned long flags;
u32 testmode = 0;
char buf[32];
if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
return -EFAULT;
if (!strncmp(buf, "test_j", 6))
testmode = TEST_J;
else if (!strncmp(buf, "test_k", 6))
testmode = TEST_K;
else if (!strncmp(buf, "test_se0_nak", 12))
testmode = TEST_SE0_NAK;
else if (!strncmp(buf, "test_packet", 11))
testmode = TEST_PACKET;
else if (!strncmp(buf, "test_force_enable", 17))
testmode = TEST_FORCE_EN;
else
testmode = 0;
spin_lock_irqsave(&hsotg->lock, flags);
s3c_hsotg_set_test_mode(hsotg, testmode);
spin_unlock_irqrestore(&hsotg->lock, flags);
return count;
}
/**
* testmode_show - debugfs: show usb test mode state
* @seq: The seq file to write to.
* @v: Unused parameter.
*
* This debugfs entry shows which usb test mode is currently enabled.
*/
static int testmode_show(struct seq_file *s, void *unused)
{
struct dwc2_hsotg *hsotg = s->private;
unsigned long flags;
int dctl;
spin_lock_irqsave(&hsotg->lock, flags);
dctl = readl(hsotg->regs + DCTL);
dctl &= DCTL_TSTCTL_MASK;
dctl >>= DCTL_TSTCTL_SHIFT;
spin_unlock_irqrestore(&hsotg->lock, flags);
switch (dctl) {
case 0:
seq_puts(s, "no test\n");
break;
case TEST_J:
seq_puts(s, "test_j\n");
break;
case TEST_K:
seq_puts(s, "test_k\n");
break;
case TEST_SE0_NAK:
seq_puts(s, "test_se0_nak\n");
break;
case TEST_PACKET:
seq_puts(s, "test_packet\n");
break;
case TEST_FORCE_EN:
seq_puts(s, "test_force_enable\n");
break;
default:
seq_printf(s, "UNKNOWN %d\n", dctl);
}
return 0;
}
static int testmode_open(struct inode *inode, struct file *file)
{
return single_open(file, testmode_show, inode->i_private);
}
static const struct file_operations testmode_fops = {
.owner = THIS_MODULE,
.open = testmode_open,
.write = testmode_write,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
/**
* state_show - debugfs: show overall driver and device state.
* @seq: The seq file to write to.
......@@ -3490,6 +3656,14 @@ static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg)
if (IS_ERR(hsotg->debug_file))
dev_err(hsotg->dev, "%s: failed to create state\n", __func__);
hsotg->debug_testmode = debugfs_create_file("testmode",
S_IRUGO | S_IWUSR, root,
hsotg, &testmode_fops);
if (IS_ERR(hsotg->debug_testmode))
dev_err(hsotg->dev, "%s: failed to create testmode\n",
__func__);
hsotg->debug_fifo = debugfs_create_file("fifo", 0444, root,
hsotg, &fifo_fops);
......@@ -3544,6 +3718,7 @@ static void s3c_hsotg_delete_debug(struct dwc2_hsotg *hsotg)
}
debugfs_remove(hsotg->debug_file);
debugfs_remove(hsotg->debug_testmode);
debugfs_remove(hsotg->debug_fifo);
debugfs_remove(hsotg->debug_root);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment