mt76: move txpower_conf back to driver specific structs

Nothing in the core uses it
Signed-off-by: Felix Fietkau <nbd@nbd.name>

drivers/net/wireless/mediatek/mt76/mt76.h

@@ -534,7 +534,6 @@ struct mt76_dev {
 	struct mt76_hw_cap cap;
 
 	struct mt76_rate_power rate_power;
-	int txpower_conf;
 	int txpower_cur;
 
 	enum nl80211_dfs_regions region;

drivers/net/wireless/mediatek/mt76/mt76x0/main.c

@@ -44,7 +44,7 @@ int mt76x0_config(struct ieee80211_hw *hw, u32 changed)
 	}
 
 	if (changed & IEEE80211_CONF_CHANGE_POWER) {
-		dev->mt76.txpower_conf = hw->conf.power_level * 2;
+		dev->txpower_conf = hw->conf.power_level * 2;
 
 		if (test_bit(MT76_STATE_RUNNING, &dev->mphy.state))
 			mt76x0_phy_set_txpower(dev);

drivers/net/wireless/mediatek/mt76/mt76x0/phy.c

@@ -848,7 +848,7 @@ void mt76x0_phy_set_txpower(struct mt76x02_dev *dev)
 	mt76x0_get_power_info(dev, dev->mphy.chandef.chan, &info);
 
 	mt76x02_add_rate_power_offset(t, info);
-	mt76x02_limit_rate_power(t, dev->mt76.txpower_conf);
+	mt76x02_limit_rate_power(t, dev->txpower_conf);
 	dev->mt76.txpower_cur = mt76x02_get_max_rate_power(t);
 	mt76x02_add_rate_power_offset(t, -info);
 

drivers/net/wireless/mediatek/mt76/mt76x02.h

@@ -108,6 +108,7 @@ struct mt76x02_dev {
 
 	struct mt76x02_calibration cal;
 
+	int txpower_conf;
 	s8 target_power;
 	s8 target_power_delta[2];
 	bool enable_tpc;

drivers/net/wireless/mediatek/mt76/mt76x02_mac.c

@@ -386,7 +386,7 @@ void mt76x02_mac_write_txwi(struct mt76x02_dev *dev, struct mt76x02_txwi *txwi,
 		max_txpwr_adj = mt76x02_tx_get_max_txpwr_adj(dev, rate);
 	}
 
-	txpwr_adj = mt76x02_tx_get_txpwr_adj(dev, dev->mt76.txpower_conf,
+	txpwr_adj = mt76x02_tx_get_txpwr_adj(dev, dev->txpower_conf,
 					     max_txpwr_adj);
 	txwi->ctl2 = FIELD_PREP(MT_TX_PWR_ADJ, txpwr_adj);
 

drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c

@@ -96,7 +96,7 @@ s8 mt76x02_tx_get_max_txpwr_adj(struct mt76x02_dev *dev,
 
 s8 mt76x02_tx_get_txpwr_adj(struct mt76x02_dev *dev, s8 txpwr, s8 max_txpwr_adj)
 {
-	txpwr = min_t(s8, txpwr, dev->mt76.txpower_conf);
+	txpwr = min_t(s8, txpwr, dev->txpower_conf);
 	txpwr -= (dev->target_power + dev->target_power_delta[0]);
 	txpwr = min_t(s8, txpwr, max_txpwr_adj);
 

drivers/net/wireless/mediatek/mt76/mt76x2/pci_main.c

@@ -86,14 +86,14 @@ mt76x2_config(struct ieee80211_hw *hw, u32 changed)
 	}
 
 	if (changed & IEEE80211_CONF_CHANGE_POWER) {
-		dev->mt76.txpower_conf = hw->conf.power_level * 2;
+		dev->txpower_conf = hw->conf.power_level * 2;
 
 		/* convert to per-chain power for 2x2 devices */
-		dev->mt76.txpower_conf -= 6;
+		dev->txpower_conf -= 6;
 
 		if (test_bit(MT76_STATE_RUNNING, &dev->mphy.state)) {
 			mt76x2_phy_set_txpower(dev);
-			mt76x02_tx_set_txpwr_auto(dev, dev->mt76.txpower_conf);
+			mt76x02_tx_set_txpwr_auto(dev, dev->txpower_conf);
 		}
 	}
 

drivers/net/wireless/mediatek/mt76/mt76x2/phy.c

@@ -152,7 +152,7 @@ void mt76x2_phy_set_txpower(struct mt76x02_dev *dev)
 
 	mt76x2_get_rate_power(dev, &t, chan);
 	mt76x02_add_rate_power_offset(&t, txp.target_power + delta);
-	mt76x02_limit_rate_power(&t, dev->mt76.txpower_conf);
+	mt76x02_limit_rate_power(&t, dev->txpower_conf);
 	dev->mt76.txpower_cur = mt76x02_get_max_rate_power(&t);
 
 	base_power = mt76x2_get_min_rate_power(&t);

drivers/net/wireless/mediatek/mt76/mt76x2/usb_main.c

@@ -78,10 +78,10 @@ mt76x2u_config(struct ieee80211_hw *hw, u32 changed)
 	}
 
 	if (changed & IEEE80211_CONF_CHANGE_POWER) {
-		dev->mt76.txpower_conf = hw->conf.power_level * 2;
+		dev->txpower_conf = hw->conf.power_level * 2;
 
 		/* convert to per-chain power for 2x2 devices */
-		dev->mt76.txpower_conf -= 6;
+		dev->txpower_conf -= 6;
 
 		if (test_bit(MT76_STATE_RUNNING, &dev->mphy.state))
 			mt76x2_phy_set_txpower(dev);