Commit 9fa7231b authored by Leo Yan's avatar Leo Yan Committed by Stephen Boyd

clk: hi6220: change watchdog clock source

The old code uses tcxo (19.2MHz) as watchdog clock but actually the
watchdog uses 32K clock, as result the watchdog timeout cannot be set
correctly and delay long time to reset SoC.

So this patch is to use 'ref32k' as clock source for watchdog.

Fixes: 72ea4861 ("clk: hi6220: Clock driver support for Hisilicon hi6220 SoC")
Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent 65bc9d7f
......@@ -55,9 +55,9 @@ static struct hisi_fixed_factor_clock hi6220_fixed_factor_clks[] __initdata = {
};
static struct hisi_gate_clock hi6220_separated_gate_clks_ao[] __initdata = {
{ HI6220_WDT0_PCLK, "wdt0_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 12, 0, },
{ HI6220_WDT1_PCLK, "wdt1_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 13, 0, },
{ HI6220_WDT2_PCLK, "wdt2_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 14, 0, },
{ HI6220_WDT0_PCLK, "wdt0_pclk", "ref32k", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 12, 0, },
{ HI6220_WDT1_PCLK, "wdt1_pclk", "ref32k", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 13, 0, },
{ HI6220_WDT2_PCLK, "wdt2_pclk", "ref32k", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 14, 0, },
{ HI6220_TIMER0_PCLK, "timer0_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 15, 0, },
{ HI6220_TIMER1_PCLK, "timer1_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 16, 0, },
{ HI6220_TIMER2_PCLK, "timer2_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 17, 0, },
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment