nfp: bpf: migrate to advanced reciprocal divide in reciprocal_div.h

As we are doing JIT, we would want to use the advanced version of the
reciprocal divide (reciprocal_value_adv) to trade performance with host.

We could reduce the required ALU instructions from 4 to 2 or 1.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

drivers/net/ethernet/netronome/nfp/bpf/jit.c

@@ -1497,8 +1497,8 @@ wrp_mul(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta,
 static int wrp_div_imm(struct nfp_prog *nfp_prog, u8 dst, u64 imm)
 {
 	swreg dst_both = reg_both(dst), dst_a = reg_a(dst), dst_b = reg_a(dst);
-	struct reciprocal_value rvalue;
-	swreg tmp_b = imm_b(nfp_prog);
+	struct reciprocal_value_adv rvalue;
+	u8 pre_shift, exp;
 	swreg magic;
 
 	if (imm > U32_MAX) {
@@ -1506,16 +1506,58 @@ static int wrp_div_imm(struct nfp_prog *nfp_prog, u8 dst, u64 imm)
 		return 0;
 	}
 
-	rvalue = reciprocal_value(imm);
+	/* NOTE: because we are using "reciprocal_value_adv" which doesn't
+	 * support "divisor > (1u << 31)", we need to JIT separate NFP sequence
+	 * to handle such case which actually equals to the result of unsigned
+	 * comparison "dst >= imm" which could be calculated using the following
+	 * NFP sequence:
+	 *
+	 *  alu[--, dst, -, imm]
+	 *  immed[imm, 0]
+	 *  alu[dst, imm, +carry, 0]
+	 *
+	 */
+	if (imm > 1U << 31) {
+		swreg tmp_b = ur_load_imm_any(nfp_prog, imm, imm_b(nfp_prog));
+
+		emit_alu(nfp_prog, reg_none(), dst_a, ALU_OP_SUB, tmp_b);
+		wrp_immed(nfp_prog, imm_a(nfp_prog), 0);
+		emit_alu(nfp_prog, dst_both, imm_a(nfp_prog), ALU_OP_ADD_C,
+			 reg_imm(0));
+		return 0;
+	}
+
+	rvalue = reciprocal_value_adv(imm, 32);
+	exp = rvalue.exp;
+	if (rvalue.is_wide_m && !(imm & 1)) {
+		pre_shift = fls(imm & -imm) - 1;
+		rvalue = reciprocal_value_adv(imm >> pre_shift, 32 - pre_shift);
+	} else {
+		pre_shift = 0;
+	}
 	magic = ur_load_imm_any(nfp_prog, rvalue.m, imm_b(nfp_prog));
-	wrp_mul_u32(nfp_prog, imm_both(nfp_prog), reg_none(), dst_a, magic,
-		    true);
-	emit_alu(nfp_prog, dst_both, dst_a, ALU_OP_SUB, tmp_b);
-	emit_shf(nfp_prog, dst_both, reg_none(), SHF_OP_NONE, dst_b,
-		 SHF_SC_R_SHF, rvalue.sh1);
-	emit_alu(nfp_prog, dst_both, dst_a, ALU_OP_ADD, tmp_b);
-	emit_shf(nfp_prog, dst_both, reg_none(), SHF_OP_NONE, dst_b,
-		 SHF_SC_R_SHF, rvalue.sh2);
+	if (imm == 1U << exp) {
+		emit_shf(nfp_prog, dst_both, reg_none(), SHF_OP_NONE, dst_b,
+			 SHF_SC_R_SHF, exp);
+	} else if (rvalue.is_wide_m) {
+		wrp_mul_u32(nfp_prog, imm_both(nfp_prog), reg_none(), dst_a,
+			    magic, true);
+		emit_alu(nfp_prog, dst_both, dst_a, ALU_OP_SUB,
+			 imm_b(nfp_prog));
+		emit_shf(nfp_prog, dst_both, reg_none(), SHF_OP_NONE, dst_b,
+			 SHF_SC_R_SHF, 1);
+		emit_alu(nfp_prog, dst_both, dst_a, ALU_OP_ADD,
+			 imm_b(nfp_prog));
+		emit_shf(nfp_prog, dst_both, reg_none(), SHF_OP_NONE, dst_b,
+			 SHF_SC_R_SHF, rvalue.sh - 1);
+	} else {
+		if (pre_shift)
+			emit_shf(nfp_prog, dst_both, reg_none(), SHF_OP_NONE,
+				 dst_b, SHF_SC_R_SHF, pre_shift);
+		wrp_mul_u32(nfp_prog, dst_both, reg_none(), dst_a, magic, true);
+		emit_shf(nfp_prog, dst_both, reg_none(), SHF_OP_NONE,
+			 dst_b, SHF_SC_R_SHF, rvalue.sh);
+	}
 
 	return 0;
 }