Commit 9fffb55f authored by David Gibson's avatar David Gibson Committed by Linus Torvalds

Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtc

The powerpc kernel always requires an Open Firmware like device tree
to supply device information.  On systems without OF, this comes from
a flattened device tree blob.  This blob is usually generated by dtc,
a tool which compiles a text description of the device tree into the
flattened format used by the kernel.  Sometimes, the bootwrapper makes
small changes to the pre-compiled device tree blob (e.g. filling in
the size of RAM).  To do this it uses the libfdt library.

Because these are only used on powerpc, the code for both these tools
is included under arch/powerpc/boot (these were imported and are
periodically updated from the upstream dtc tree).

However, the microblaze architecture, currently being prepared for
merging to mainline also uses dtc to produce device tree blobs.  A few
other archs have also mentioned some interest in using dtc.
Therefore, this patch moves dtc and libfdt from arch/powerpc into
scripts, where it can be used by any architecture.

The vast bulk of this patch is a literal move, the rest is adjusting
the various Makefiles to use dtc and libfdt correctly from their new
locations.
Signed-off-by: default avatarDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent afc1e702
......@@ -181,6 +181,10 @@ config SYS_SUPPORTS_APM_EMULATION
default y if PMAC_APM_EMU
bool
config DTC
bool
default y
config DEFAULT_UIMAGE
bool
help
......
......@@ -33,7 +33,7 @@ ifeq ($(call cc-option-yn, -fstack-protector),y)
BOOTCFLAGS += -fno-stack-protector
endif
BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj)
DTS_FLAGS ?= -p 1024
......@@ -53,9 +53,14 @@ zliblinuxheader := zlib.h zconf.h zutil.h
$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
libfdtheader := fdt.h libfdt.h libfdt_internal.h
$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
$(addprefix $(obj)/,$(libfdtheader))
src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
$(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
$(libfdt) libfdt-wrapper.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
......@@ -96,6 +101,12 @@ $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
$(call cmd,copy_zliblinuxheader)
quiet_cmd_copy_libfdt = COPY $@
cmd_copy_libfdt = cp $< $@
$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
$(call cmd,copy_libfdt)
$(obj)/empty.c:
@touch $@
......@@ -103,6 +114,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srct
@cp $< $@
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
$(libfdt) $(libfdtheader) \
empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
quiet_cmd_bootcc = BOOTCC $@
......@@ -114,6 +126,8 @@ quiet_cmd_bootas = BOOTAS $@
quiet_cmd_bootar = BOOTAR $@
cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
$(call if_changed_dep,bootcc)
$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,bootcc)
......@@ -124,7 +138,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
$(obj)/wrapper.a: $(obj-wlib) FORCE
$(call if_changed,bootar)
hostprogs-y := addnote addRamDisk hack-coff mktree dtc
hostprogs-y := addnote addRamDisk hack-coff mktree
targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
......@@ -133,46 +147,9 @@ extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
dtstree := $(srctree)/$(src)/dts
wrapper :=$(srctree)/$(src)/wrapper
wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \
wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
$(wrapper) FORCE
#############
# Bits for building dtc
# DTC_GENPARSER := 1 # Uncomment to rebuild flex/bison output
dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o
dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
dtc-objs := $(addprefix dtc-src/, $(dtc-objs))
# prerequisites on generated files needs to be explicit
$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h
$(obj)/dtc-src/dtc-lexer.lex.o: $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h
HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/
targets += dtc-src/dtc-parser.tab.c
targets += dtc-src/dtc-lexer.lex.c
clean-files += dtc-src/dtc-parser.tab.h
ifdef DTC_GENPARSER
BISON = bison
FLEX = flex
quiet_cmd_bison = BISON $@
cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
quiet_cmd_flex = FLEX $@
cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
$(call if_changed,bison)
$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
$(call if_changed,flex)
endif
#############
# Bits for building various flavours of zImage
......@@ -347,8 +324,10 @@ $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
# Rule to build device tree blobs
$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
$(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
DTC = $(objtree)/scripts/dtc/dtc
$(obj)/%.dtb: $(dtstree)/%.dts
$(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
# If there isn't a platform selected then just strip the vmlinux.
ifeq (,$(image-y))
......
......@@ -19,7 +19,7 @@
#include "types.h"
#include "io.h"
#include "stdio.h"
#include "libfdt/libfdt.h"
#include <libfdt.h>
BSS_STACK(4*1024);
......
......@@ -21,6 +21,7 @@ hostprogs-y += unifdef
subdir-$(CONFIG_MODVERSIONS) += genksyms
subdir-y += mod
subdir-$(CONFIG_SECURITY_SELINUX) += selinux
subdir-$(CONFIG_DTC) += dtc
# Let clean descend into subdirs
subdir- += basic kconfig package selinux
# scripts/dtc makefile
hostprogs-y := dtc
always := $(hostprogs-y)
dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
srcpos.o checks.o
dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
# Source files need to get at the userspace version of libfdt_env.h to compile
HOSTCFLAGS_DTC := -I$(src) -I$(src)/libfdt
HOSTCFLAGS_checks.o := $(HOSTCFLAGS_DTC)
HOSTCFLAGS_data.o := $(HOSTCFLAGS_DTC)
HOSTCFLAGS_dtc.o := $(HOSTCFLAGS_DTC)
HOSTCFLAGS_flattree.o := $(HOSTCFLAGS_DTC)
HOSTCFLAGS_fstree.o := $(HOSTCFLAGS_DTC)
HOSTCFLAGS_livetree.o := $(HOSTCFLAGS_DTC)
HOSTCFLAGS_srcpos.o := $(HOSTCFLAGS_DTC)
HOSTCFLAGS_treesource.o := $(HOSTCFLAGS_DTC)
HOSTCFLAGS_dtc-lexer.lex.o := $(HOSTCFLAGS_DTC)
HOSTCFLAGS_dtc-parser.tab.o := $(HOSTCFLAGS_DTC)
# dependencies on generated files need to be listed explicitly
$(obj)/dtc-parser.tab.o: $(obj)/dtc-parser.tab.c $(obj)/dtc-parser.tab.h
$(obj)/dtc-lexer.lex.o: $(obj)/dtc-lexer.lex.c $(obj)/dtc-parser.tab.h
targets += dtc-parser.tab.c dtc-lexer.lex.c
clean-files += dtc-parser.tab.h
# GENERATE_PARSER := 1 # Uncomment to rebuild flex/bison output
ifdef GENERATE_PARSER
BISON = bison
FLEX = flex
quiet_cmd_bison = BISON $@
cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
quiet_cmd_flex = FLEX $@
cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
$(obj)/dtc-parser.tab.c: $(src)/dtc-parser.y FORCE
$(call if_changed,bison)
$(obj)/dtc-parser.tab.h: $(obj)/dtc-parser.tab.c
$(obj)/dtc-lexer.lex.c: $(src)/dtc-lexer.l FORCE
$(call if_changed,flex)
endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment