Commit a0657716 authored by Denis CIOCCA's avatar Denis CIOCCA Committed by Jonathan Cameron

iio:gyro: bug on L3GD20H gyroscope support

The driver was not able to manage the sensor: during probe function
and wai check, the driver stops and writes: "device name and WhoAmI mismatch."
The correct value of L3GD20H wai is 0xd7 instead of 0xd4.
Dropped support for the sensor.
Signed-off-by: default avatarDenis Ciocca <denis.ciocca@st.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 1463a166
...@@ -70,7 +70,7 @@ config IIO_ST_GYRO_3AXIS ...@@ -70,7 +70,7 @@ config IIO_ST_GYRO_3AXIS
select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
help help
Say yes here to build support for STMicroelectronics gyroscopes: Say yes here to build support for STMicroelectronics gyroscopes:
L3G4200D, LSM330DL, L3GD20, L3GD20H, LSM330DLC, L3G4IS, LSM330. L3G4200D, LSM330DL, L3GD20, LSM330DLC, L3G4IS, LSM330.
This driver can also be built as a module. If so, these modules This driver can also be built as a module. If so, these modules
will be created: will be created:
......
...@@ -19,7 +19,6 @@ ...@@ -19,7 +19,6 @@
#define LSM330DL_GYRO_DEV_NAME "lsm330dl_gyro" #define LSM330DL_GYRO_DEV_NAME "lsm330dl_gyro"
#define LSM330DLC_GYRO_DEV_NAME "lsm330dlc_gyro" #define LSM330DLC_GYRO_DEV_NAME "lsm330dlc_gyro"
#define L3GD20_GYRO_DEV_NAME "l3gd20" #define L3GD20_GYRO_DEV_NAME "l3gd20"
#define L3GD20H_GYRO_DEV_NAME "l3gd20h"
#define L3G4IS_GYRO_DEV_NAME "l3g4is_ui" #define L3G4IS_GYRO_DEV_NAME "l3g4is_ui"
#define LSM330_GYRO_DEV_NAME "lsm330_gyro" #define LSM330_GYRO_DEV_NAME "lsm330_gyro"
......
...@@ -167,11 +167,10 @@ static const struct st_sensors st_gyro_sensors[] = { ...@@ -167,11 +167,10 @@ static const struct st_sensors st_gyro_sensors[] = {
.wai = ST_GYRO_2_WAI_EXP, .wai = ST_GYRO_2_WAI_EXP,
.sensors_supported = { .sensors_supported = {
[0] = L3GD20_GYRO_DEV_NAME, [0] = L3GD20_GYRO_DEV_NAME,
[1] = L3GD20H_GYRO_DEV_NAME, [1] = LSM330D_GYRO_DEV_NAME,
[2] = LSM330D_GYRO_DEV_NAME, [2] = LSM330DLC_GYRO_DEV_NAME,
[3] = LSM330DLC_GYRO_DEV_NAME, [3] = L3G4IS_GYRO_DEV_NAME,
[4] = L3G4IS_GYRO_DEV_NAME, [4] = LSM330_GYRO_DEV_NAME,
[5] = LSM330_GYRO_DEV_NAME,
}, },
.ch = (struct iio_chan_spec *)st_gyro_16bit_channels, .ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
.odr = { .odr = {
......
...@@ -55,7 +55,6 @@ static const struct i2c_device_id st_gyro_id_table[] = { ...@@ -55,7 +55,6 @@ static const struct i2c_device_id st_gyro_id_table[] = {
{ LSM330DL_GYRO_DEV_NAME }, { LSM330DL_GYRO_DEV_NAME },
{ LSM330DLC_GYRO_DEV_NAME }, { LSM330DLC_GYRO_DEV_NAME },
{ L3GD20_GYRO_DEV_NAME }, { L3GD20_GYRO_DEV_NAME },
{ L3GD20H_GYRO_DEV_NAME },
{ L3G4IS_GYRO_DEV_NAME }, { L3G4IS_GYRO_DEV_NAME },
{ LSM330_GYRO_DEV_NAME }, { LSM330_GYRO_DEV_NAME },
{}, {},
......
...@@ -54,7 +54,6 @@ static const struct spi_device_id st_gyro_id_table[] = { ...@@ -54,7 +54,6 @@ static const struct spi_device_id st_gyro_id_table[] = {
{ LSM330DL_GYRO_DEV_NAME }, { LSM330DL_GYRO_DEV_NAME },
{ LSM330DLC_GYRO_DEV_NAME }, { LSM330DLC_GYRO_DEV_NAME },
{ L3GD20_GYRO_DEV_NAME }, { L3GD20_GYRO_DEV_NAME },
{ L3GD20H_GYRO_DEV_NAME },
{ L3G4IS_GYRO_DEV_NAME }, { L3G4IS_GYRO_DEV_NAME },
{ LSM330_GYRO_DEV_NAME }, { LSM330_GYRO_DEV_NAME },
{}, {},
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment