Merge tag 'iio-fixes-for-3.14b' of...

Merge tag 'iio-fixes-for-3.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second round of IIO fixes for the 3.14 cycle.

Another mixed bag, including some that were not in round 1 because
they applied to elements that went in during the merge window whereas
round 1 predated that.  I have been effectively out of action for 3 weeks
so will take a little while to catch up with my backlog.

* mag3110 - report busy in read_raw / write_raw when buffered capture
  is underway to avoid either changing the characteristics of the capture or
  causing capture issues by reading data destined for the buffer.
* mag3110 - fix a failure to specify leading zeros when formatting a decimal
  number.
* lradc - fix a buffer overflow and incorrect reporting of scale for voltage
  channel 15
* lradc - drop some scale_available attributes for elements that don't actually
  exist.  These could otherwise cause some interesting issues for userspace.
* ad799x - a typo in the events information mask resulted in some nasty crashes
  on failed probes.
* ak8975 - fix scale attribute output to avoid incorrect intepretation of
  readings in userspace.
* adis16400 - make sure the timestamp is the last element in all channel_spec
  arrays as this assumption is made by the buffer filling code, but was not
  true previously.
* bma180 - correctly use modifiers to distinguish the channels rather than
  indexes.  This brings the abi inline with the standard option for 3 axis
  accelerometers.
* max1363 - use devm_regulator_get_optional instead of the non optional case
  to allow the device to successfully probe when a regulator is not specified.

drivers/iio/accel/bma180.c

@@ -447,14 +447,14 @@ static const struct iio_chan_spec_ext_info bma180_ext_info[] = {
 	{ },
 };
 
-#define BMA180_CHANNEL(_index) {					\
+#define BMA180_CHANNEL(_axis) {					\
 	.type = IIO_ACCEL,						\
-	.indexed = 1,							\
-	.channel = (_index),						\
+	.modified = 1,							\
+	.channel2 = IIO_MOD_##_axis,					\
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
 		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),	\
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
-	.scan_index = (_index),						\
+	.scan_index = AXIS_##_axis,					\
 	.scan_type = {							\
 		.sign = 's',						\
 		.realbits = 14,						\
@@ -465,10 +465,10 @@ static const struct iio_chan_spec_ext_info bma180_ext_info[] = {
 }
 
 static const struct iio_chan_spec bma180_channels[] = {
-	BMA180_CHANNEL(AXIS_X),
-	BMA180_CHANNEL(AXIS_Y),
-	BMA180_CHANNEL(AXIS_Z),
-	IIO_CHAN_SOFT_TIMESTAMP(4),
+	BMA180_CHANNEL(X),
+	BMA180_CHANNEL(Y),
+	BMA180_CHANNEL(Z),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
 static irqreturn_t bma180_trigger_handler(int irq, void *p)

drivers/iio/adc/max1363.c

@@ -1560,7 +1560,7 @@ static int max1363_probe(struct i2c_client *client,
 	st->client = client;
 
 	st->vref_uv = st->chip_info->int_vref_mv * 1000;
-	vref = devm_regulator_get(&client->dev, "vref");
+	vref = devm_regulator_get_optional(&client->dev, "vref");
 	if (!IS_ERR(vref)) {
 		int vref_uv;
 

drivers/iio/imu/adis16400.h

@@ -189,6 +189,7 @@ enum {
 	ADIS16300_SCAN_INCLI_X,
 	ADIS16300_SCAN_INCLI_Y,
 	ADIS16400_SCAN_ADC,
+	ADIS16400_SCAN_TIMESTAMP,
 };
 
 #ifdef CONFIG_IIO_BUFFER

drivers/iio/imu/adis16400_core.c

@@ -632,7 +632,7 @@ static const struct iio_chan_spec adis16400_channels[] = {
 	ADIS16400_MAGN_CHAN(Z, ADIS16400_ZMAGN_OUT, 14),
 	ADIS16400_TEMP_CHAN(ADIS16400_TEMP_OUT, 12),
 	ADIS16400_AUX_ADC_CHAN(ADIS16400_AUX_ADC, 12),
-	IIO_CHAN_SOFT_TIMESTAMP(12)
+	IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
 };
 
 static const struct iio_chan_spec adis16448_channels[] = {
@@ -659,7 +659,7 @@ static const struct iio_chan_spec adis16448_channels[] = {
 		},
 	},
 	ADIS16400_TEMP_CHAN(ADIS16448_TEMP_OUT, 12),
-	IIO_CHAN_SOFT_TIMESTAMP(11)
+	IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
 };
 
 static const struct iio_chan_spec adis16350_channels[] = {
@@ -677,7 +677,7 @@ static const struct iio_chan_spec adis16350_channels[] = {
 	ADIS16400_MOD_TEMP_CHAN(X, ADIS16350_XTEMP_OUT, 12),
 	ADIS16400_MOD_TEMP_CHAN(Y, ADIS16350_YTEMP_OUT, 12),
 	ADIS16400_MOD_TEMP_CHAN(Z, ADIS16350_ZTEMP_OUT, 12),
-	IIO_CHAN_SOFT_TIMESTAMP(11)
+	IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
 };
 
 static const struct iio_chan_spec adis16300_channels[] = {
@@ -690,7 +690,7 @@ static const struct iio_chan_spec adis16300_channels[] = {
 	ADIS16400_AUX_ADC_CHAN(ADIS16300_AUX_ADC, 12),
 	ADIS16400_INCLI_CHAN(X, ADIS16300_PITCH_OUT, 13),
 	ADIS16400_INCLI_CHAN(Y, ADIS16300_ROLL_OUT, 13),
-	IIO_CHAN_SOFT_TIMESTAMP(14)
+	IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
 };
 
 static const struct iio_chan_spec adis16334_channels[] = {
@@ -701,7 +701,7 @@ static const struct iio_chan_spec adis16334_channels[] = {
 	ADIS16400_ACCEL_CHAN(Y, ADIS16400_YACCL_OUT, 14),
 	ADIS16400_ACCEL_CHAN(Z, ADIS16400_ZACCL_OUT, 14),
 	ADIS16400_TEMP_CHAN(ADIS16350_XTEMP_OUT, 12),
-	IIO_CHAN_SOFT_TIMESTAMP(8)
+	IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
 };
 
 static struct attribute *adis16400_attributes[] = {

drivers/iio/magnetometer/ak8975.c

@@ -85,6 +85,7 @@
 #define AK8975_MAX_CONVERSION_TIMEOUT	500
 #define AK8975_CONVERSION_DONE_POLL_TIME 10
 #define AK8975_DATA_READY_TIMEOUT	((100*HZ)/1000)
+#define RAW_TO_GAUSS(asa) ((((asa) + 128) * 3000) / 256)
 
 /*
  * Per-instance context data for the device.
@@ -265,15 +266,15 @@ static int ak8975_setup(struct i2c_client *client)
  *
  * Since 1uT = 0.01 gauss, our final scale factor becomes:
  *
- * Hadj = H * ((ASA + 128) / 256) * 3/10 * 100
- * Hadj = H * ((ASA + 128) * 30 / 256
+ * Hadj = H * ((ASA + 128) / 256) * 3/10 * 1/100
+ * Hadj = H * ((ASA + 128) * 0.003) / 256
  *
  * Since ASA doesn't change, we cache the resultant scale factor into the
  * device context in ak8975_setup().
  */
-	data->raw_to_gauss[0] = ((data->asa[0] + 128) * 30) >> 8;
-	data->raw_to_gauss[1] = ((data->asa[1] + 128) * 30) >> 8;
-	data->raw_to_gauss[2] = ((data->asa[2] + 128) * 30) >> 8;
+	data->raw_to_gauss[0] = RAW_TO_GAUSS(data->asa[0]);
+	data->raw_to_gauss[1] = RAW_TO_GAUSS(data->asa[1]);
+	data->raw_to_gauss[2] = RAW_TO_GAUSS(data->asa[2]);
 
 	return 0;
 }
@@ -428,8 +429,9 @@ static int ak8975_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_RAW:
 		return ak8975_read_axis(indio_dev, chan->address, val);
 	case IIO_CHAN_INFO_SCALE:
-		*val = data->raw_to_gauss[chan->address];
-		return IIO_VAL_INT;
+		*val = 0;
+		*val2 = data->raw_to_gauss[chan->address];
+		return IIO_VAL_INT_PLUS_MICRO;
 	}
 	return -EINVAL;
 }

drivers/iio/magnetometer/mag3110.c

@@ -106,7 +106,7 @@ static ssize_t mag3110_show_int_plus_micros(char *buf,
 
 	while (n-- > 0)
 		len += scnprintf(buf + len, PAGE_SIZE - len,
-			"%d.%d ", vals[n][0], vals[n][1]);
+			"%d.%06d ", vals[n][0], vals[n][1]);
 
 	/* replace trailing space by newline */
 	buf[len - 1] = '\n';
@@ -154,6 +154,9 @@ static int mag3110_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
+		if (iio_buffer_enabled(indio_dev))
+			return -EBUSY;
+
 		switch (chan->type) {
 		case IIO_MAGN: /* in 0.1 uT / LSB */
 			ret = mag3110_read(data, buffer);
@@ -199,6 +202,9 @@ static int mag3110_write_raw(struct iio_dev *indio_dev,
 	struct mag3110_data *data = iio_priv(indio_dev);
 	int rate;
 
+	if (iio_buffer_enabled(indio_dev))
+		return -EBUSY;
+
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		rate = mag3110_get_samp_freq_index(data, val, val2);

drivers/staging/iio/adc/ad799x_core.c

@@ -393,7 +393,7 @@ static const struct iio_event_spec ad799x_events[] = {
 	}, {
 		.type = IIO_EV_TYPE_THRESH,
 		.dir = IIO_EV_DIR_FALLING,
-		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
 			BIT(IIO_EV_INFO_ENABLE),
 	}, {
 		.type = IIO_EV_TYPE_THRESH,

drivers/staging/iio/adc/mxs-lradc.c

@@ -1035,8 +1035,6 @@ SHOW_SCALE_AVAILABLE_ATTR(4);
 SHOW_SCALE_AVAILABLE_ATTR(5);
 SHOW_SCALE_AVAILABLE_ATTR(6);
 SHOW_SCALE_AVAILABLE_ATTR(7);
-SHOW_SCALE_AVAILABLE_ATTR(8);
-SHOW_SCALE_AVAILABLE_ATTR(9);
 SHOW_SCALE_AVAILABLE_ATTR(10);
 SHOW_SCALE_AVAILABLE_ATTR(11);
 SHOW_SCALE_AVAILABLE_ATTR(12);
@@ -1053,8 +1051,6 @@ static struct attribute *mxs_lradc_attributes[] = {
 	&iio_dev_attr_in_voltage5_scale_available.dev_attr.attr,
 	&iio_dev_attr_in_voltage6_scale_available.dev_attr.attr,
 	&iio_dev_attr_in_voltage7_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage8_scale_available.dev_attr.attr,
-	&iio_dev_attr_in_voltage9_scale_available.dev_attr.attr,
 	&iio_dev_attr_in_voltage10_scale_available.dev_attr.attr,
 	&iio_dev_attr_in_voltage11_scale_available.dev_attr.attr,
 	&iio_dev_attr_in_voltage12_scale_available.dev_attr.attr,
@@ -1613,7 +1609,7 @@ static int mxs_lradc_probe(struct platform_device *pdev)
 			 * of the array.
 			 */
 			scale_uv = ((u64)lradc->vref_mv[i] * 100000000) >>
-				   (iio->channels[i].scan_type.realbits - s);
+				   (LRADC_RESOLUTION - s);
 			lradc->scale_avail[i][s].nano =
 					do_div(scale_uv, 100000000) * 10;
 			lradc->scale_avail[i][s].integer = scale_uv;