Commit a1614796 authored by Jamie Lenehan's avatar Jamie Lenehan Committed by Paul Mundt

rtc: rtc-sh: fix rtc for out-by-one for the month.

The RMONCNT register, which holds the month in the RTC, takes a value
between 1 and 12 while the tm_mon field in the time structures takes
a value between 0 and 11. This wasn't being taken into account in
rtc-sh resulting in the month being out by one.

eg, on my board during boot the RTC is set to:

  RTC is set to Thu Jul 01 09:00:00 1999

but "hwclock -r" immediately after logging in was showing:

  Sun Aug  1 09:01:43 1999  0.000000 seconds
Signed-off-by: default avatarJamie Lenehan <lenehan@twibble.org>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent 55eec11a
......@@ -268,7 +268,7 @@ static int sh_rtc_read_time(struct device *dev, struct rtc_time *tm)
tm->tm_hour = BCD2BIN(readb(rtc->regbase + RHRCNT));
tm->tm_wday = BCD2BIN(readb(rtc->regbase + RWKCNT));
tm->tm_mday = BCD2BIN(readb(rtc->regbase + RDAYCNT));
tm->tm_mon = BCD2BIN(readb(rtc->regbase + RMONCNT));
tm->tm_mon = BCD2BIN(readb(rtc->regbase + RMONCNT)) - 1;
#if defined(CONFIG_CPU_SH4)
yr = readw(rtc->regbase + RYRCNT);
......@@ -296,7 +296,7 @@ static int sh_rtc_read_time(struct device *dev, struct rtc_time *tm)
"mday=%d, mon=%d, year=%d, wday=%d\n",
__FUNCTION__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
tm->tm_mday, tm->tm_mon + 1, tm->tm_year, tm->tm_wday);
if (rtc_valid_tm(tm) < 0)
dev_err(dev, "invalid date\n");
......@@ -323,7 +323,7 @@ static int sh_rtc_set_time(struct device *dev, struct rtc_time *tm)
writeb(BIN2BCD(tm->tm_hour), rtc->regbase + RHRCNT);
writeb(BIN2BCD(tm->tm_wday), rtc->regbase + RWKCNT);
writeb(BIN2BCD(tm->tm_mday), rtc->regbase + RDAYCNT);
writeb(BIN2BCD(tm->tm_mon), rtc->regbase + RMONCNT);
writeb(BIN2BCD(tm->tm_mon + 1), rtc->regbase + RMONCNT);
#ifdef CONFIG_CPU_SH3
year = tm->tm_year % 100;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment