Merge tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "This has been a very active release for the DesignWare driver in
  particular - after a long period of inactivity we have had a lot of
  people actively working on it for unrelated reasons this cycle with
  some of that work still not landed.

  Otherwise it's been fairly quiet for the subsystem.

  Highlights include:

   - Lots of performance improvements and fixes for the DesignWare
     driver from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement
     Leger, Dinh Nguyen and Jarkko Nikula.

   - Support for octal mode transfers in spidev.

   - Slave mode support for the Rockchip drivers.

   - Support for AMD controllers, Broadcom mspi and Raspberry Pi 4, and
     Intel Elkhart Lake"

* tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (125 commits)
  spi: spi-fsl-dspi: fix native data copy
  spi: Convert DW SPI binding to DT schema
  spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config
  spi: dw: Make DMA request line assignments explicit for Intel Medfield
  spi: bcm2835: Remove shared interrupt support
  dt-bindings: snps,dw-apb-ssi: add optional reset property
  spi: dw: add reset control
  spi: bcm2835: Enable shared interrupt support
  spi: bcm2835: Implement shutdown callback
  spi: dw: Use regset32 DebugFS method to create regdump file
  spi: dw: Add DMA support to the DW SPI MMIO driver
  spi: dw: Cleanup generic DW DMA code namings
  spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
  spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
  spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
  spi: dw: Add core suffix to the DW APB SSI core source file
  spi: dw: Fix Rx-only DMA transfers
  spi: dw: Use DMA max burst to set the request thresholds
  spi: dw: Parameterize the DMA Rx/Tx burst length
  spi: dw: Add SPI Rx-done wait method to DMA-based transfer
  ...

Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt

@@ -26,6 +26,16 @@ Required properties:
     "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-qspi" : MSPI+BSPI on BRCMSTB SoCs
     "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
 						   BRCMSTB  SoCs
+    "brcm,spi-bcm7425-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7429-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7435-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7216-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7278-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
     "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"     : MSPI+BSPI on Cygnus, NSP
     "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi"     : NS2 SoCs
 

Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mikrotik,rb4xx-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MikroTik RB4xx series SPI master
+
+maintainers:
+  - Gabor Juhos <juhosg@openwrt.org>
+  - Bert Vermeulen <bert@biot.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    const: mikrotik,rb4xx-spi
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    spi: spi@1f000000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "mikrotik,rb4xx-spi";
+        reg = <0x1f000000 0x10>;
+    };
+
+...
\ No newline at end of file

Documentation/devicetree/bindings/spi/renesas,rspi.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,rspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas (Quad) Serial Peripheral Interface (RSPI/QSPI)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,rspi-sh7757    # SH7757
+          - const: renesas,rspi        # Legacy SH
+
+      - items:
+          - enum:
+              - renesas,rspi-r7s72100  # RZ/A1H
+              - renesas,rspi-r7s9210   # RZ/A2
+          - const: renesas,rspi-rz     # RZ/A
+
+      - items:
+          - enum:
+              - renesas,qspi-r8a7743   # RZ/G1M
+              - renesas,qspi-r8a7744   # RZ/G1N
+              - renesas,qspi-r8a7745   # RZ/G1E
+              - renesas,qspi-r8a77470  # RZ/G1C
+              - renesas,qspi-r8a7790   # R-Car H2
+              - renesas,qspi-r8a7791   # R-Car M2-W
+              - renesas,qspi-r8a7792   # R-Car V2H
+              - renesas,qspi-r8a7793   # R-Car M2-N
+              - renesas,qspi-r8a7794   # R-Car E2
+          - const: renesas,qspi        # R-Car Gen2 and RZ/G1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    oneOf:
+      - items:
+          - description: A combined interrupt
+      - items:
+          - description: Error interrupt (SPEI)
+          - description: Receive Interrupt (SPRI)
+          - description: Transmit Interrupt (SPTI)
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: mux
+      - items:
+          - const: error
+          - const: rx
+          - const: tx
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+  num-cs:
+    description: |
+      Total number of native chip selects.
+      Hardware limitations related to chip selects:
+        - When using GPIO chip selects, at least one native chip select must
+          be left unused, as it will be driven anyway.
+    minimum: 1
+    maximum: 2
+    default: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rspi-rz
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+      required:
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,qspi
+    then:
+      required:
+        - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    qspi: spi@e6b10000 {
+            compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+            reg = <0xe6b10000 0x2c>;
+            interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 917>;
+            dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>;
+            dma-names = "tx", "rx", "tx", "rx";
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 917>;
+            num-cs = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+    };

Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt

-Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
-
-Required properties:
-- compatible : "snps,dw-apb-ssi" or "mscc,<soc>-spi", where soc is "ocelot" or
-  "jaguar2", or "amazon,alpine-dw-apb-ssi"
-- reg : The register base for the controller. For "mscc,<soc>-spi", a second
-  register set is required (named ICPU_CFG:SPI_MST)
-- interrupts : One interrupt, used by the controller.
-- #address-cells : <1>, as required by generic SPI binding.
-- #size-cells : <0>, also as required by generic SPI binding.
-- clocks : phandles for the clocks, see the description of clock-names below.
-   The phandle for the "ssi_clk" is required. The phandle for the "pclk" clock
-   is optional. If a single clock is specified but no clock-name, it is the
-   "ssi_clk" clock. If both clocks are listed, the "ssi_clk" must be first.
-
-Optional properties:
-- clock-names : Contains the names of the clocks:
-    "ssi_clk", for the core clock used to generate the external SPI clock.
-    "pclk", the interface clock, required for register access. If a clock domain
-     used to enable this clock then it should be named "pclk_clkdomain".
-- cs-gpios : Specifies the gpio pins to be used for chipselects.
-- num-cs : The number of chipselects. If omitted, this will default to 4.
-- reg-io-width : The I/O register width (in bytes) implemented by this
-  device.  Supported values are 2 or 4 (the default).
-
-Child nodes as per the generic SPI binding.
-
-Example:
-
-	spi@fff00000 {
-		compatible = "snps,dw-apb-ssi";
-		reg = <0xfff00000 0x1000>;
-		interrupts = <0 154 4>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&spi_m_clk>;
-		num-cs = <2>;
-		cs-gpios = <&gpio0 13 0>,
-			   <&gpio0 14 0>;
-	};
-

Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/snps,dw-apb-ssi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mscc,ocelot-spi
+              - mscc,jaguar2-spi
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+properties:
+  compatible:
+    oneOf:
+      - description: Generic DW SPI Controller
+        enum:
+          - snps,dw-apb-ssi
+          - snps,dwc-ssi-1.01a
+      - description: Microsemi Ocelot/Jaguar2 SoC SPI Controller
+        items:
+          - enum:
+              - mscc,ocelot-spi
+              - mscc,jaguar2-spi
+          - const: snps,dw-apb-ssi
+      - description: Amazon Alpine SPI Controller
+        const: amazon,alpine-dw-apb-ssi
+      - description: Renesas RZ/N1 SPI Controller
+        items:
+          - const: renesas,rzn1-spi
+          - const: snps,dw-apb-ssi
+      - description: Intel Keem Bay SPI Controller
+        const: intel,keembay-ssi
+
+  reg:
+    minItems: 1
+    items:
+      - description: DW APB SSI controller memory mapped registers
+      - description: SPI MST region map
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: SPI Controller reference clock source
+      - description: APB interface clock source
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ssi_clk
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: spi
+
+  reg-io-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: I/O register width (in bytes) implemented by this device
+    default: 4
+    enum: [ 2, 4 ]
+
+  num-cs:
+    default: 4
+    minimum: 1
+    maximum: 4
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+
+      spi-rx-bus-width:
+        const: 1
+
+      spi-tx-bus-width:
+        const: 1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    spi@fff00000 {
+      compatible = "snps,dw-apb-ssi";
+      reg = <0xfff00000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <0 154 4>;
+      clocks = <&spi_m_clk>;
+      num-cs = <2>;
+      cs-gpios = <&gpio0 13 0>,
+                 <&gpio0 14 0>;
+    };
+...

Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/socionext,uniphier-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SPI controller
+
+description: |
+  UniPhier SoCs have SCSSI which supports SPI single channel.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+  - Keiji Hayashibara <hayashibara.keiji@socionext.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  "#address-cells": true
+  "#size-cells": true
+
+  compatible:
+    const: socionext,uniphier-scssi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    spi0: spi@54006000 {
+        compatible = "socionext,uniphier-scssi";
+        reg = <0x54006000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <0 39 4>;
+        clocks = <&peri_clk 11>;
+        resets = <&peri_rst 11>;
+    };

Documentation/devicetree/bindings/spi/spi-dw.txt

-Synopsys DesignWare SPI master
-
-Required properties:
-- compatible: should be "snps,designware-spi"
-- #address-cells: see spi-bus.txt
-- #size-cells: see spi-bus.txt
-- reg: address and length of the spi master registers
-- interrupts: should contain one interrupt
-- clocks: spi clock phandle
-- num-cs: see spi-bus.txt
-
-Optional properties:
-- cs-gpios: see spi-bus.txt
-
-Example:
-
-spi: spi@4020a000 {
-	compatible = "snps,designware-spi";
-	interrupts = <11 1>;
-	reg = <0x4020a000 0x1000>;
-	clocks = <&pclk>;
-	num-cs = <2>;
-	cs-gpios = <&banka 0 0>;
-};

Documentation/devicetree/bindings/spi/spi-rspi.txt

-Device tree configuration for Renesas RSPI/QSPI driver
-
-Required properties:
-- compatible       : For Renesas Serial Peripheral Interface on legacy SH:
-		     "renesas,rspi-<soctype>", "renesas,rspi" as fallback.
-		     For Renesas Serial Peripheral Interface on RZ/A:
-		     "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
-		     For Quad Serial Peripheral Interface on R-Car Gen2 and
-		     RZ/G1 devices:
-		     "renesas,qspi-<soctype>", "renesas,qspi" as fallback.
-		     Examples with soctypes are:
-		        - "renesas,rspi-sh7757" (SH)
-			- "renesas,rspi-r7s72100" (RZ/A1H)
-			- "renesas,rspi-r7s9210" (RZ/A2)
-			- "renesas,qspi-r8a7743" (RZ/G1M)
-			- "renesas,qspi-r8a7744" (RZ/G1N)
-			- "renesas,qspi-r8a7745" (RZ/G1E)
-			- "renesas,qspi-r8a77470" (RZ/G1C)
-			- "renesas,qspi-r8a7790" (R-Car H2)
-			- "renesas,qspi-r8a7791" (R-Car M2-W)
-			- "renesas,qspi-r8a7792" (R-Car V2H)
-			- "renesas,qspi-r8a7793" (R-Car M2-N)
-			- "renesas,qspi-r8a7794" (R-Car E2)
-- reg              : Address start and address range size of the device
-- interrupts       : A list of interrupt-specifiers, one for each entry in
-		     interrupt-names.
-		     If interrupt-names is not present, an interrupt specifier
-		     for a single muxed interrupt.
-- interrupt-names  : A list of interrupt names. Should contain (if present):
-		       - "error" for SPEI,
-		       - "rx" for SPRI,
-		       - "tx" to SPTI,
-		       - "mux" for a single muxed interrupt.
-- num-cs	   : Number of chip selects. Some RSPI cores have more than 1.
-- #address-cells   : Must be <1>
-- #size-cells      : Must be <0>
-
-Optional properties:
-- clocks           : Must contain a reference to the functional clock.
-- dmas             : Must contain a list of two references to DMA specifiers,
-		     one for transmission, and one for reception.
-- dma-names        : Must contain a list of two DMA names, "tx" and "rx".
-
-Pinctrl properties might be needed, too.  See
-Documentation/devicetree/bindings/pinctrl/renesas,*.
-
-Examples:
-
-	spi0: spi@e800c800 {
-		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-		reg = <0xe800c800 0x24>;
-		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error", "rx", "tx";
-		interrupt-parent = <&gic>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	spi: spi@e6b10000 {
-		compatible = "renesas,qspi-r8a7791", "renesas,qspi";
-		reg = <0 0xe6b10000 0 0x2c>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
-		dma-names = "tx", "rx";
-	};

Documentation/devicetree/bindings/spi/spi-uniphier.txt

-Socionext UniPhier SPI controller driver
-
-UniPhier SoCs have SCSSI which supports SPI single channel.
-
-Required properties:
- - compatible: should be "socionext,uniphier-scssi"
- - reg: address and length of the spi master registers
- - #address-cells: must be <1>, see spi-bus.txt
- - #size-cells: must be <0>, see spi-bus.txt
- - interrupts: a single interrupt specifier
- - pinctrl-names: should be "default"
- - pinctrl-0: pin control state for the default mode
- - clocks: a phandle to the clock for the device
- - resets: a phandle to the reset control for the device
-
-Example:
-
-spi0: spi@54006000 {
-	compatible = "socionext,uniphier-scssi";
-	reg = <0x54006000 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	interrupts = <0 39 4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi0>;
-	clocks = <&peri_clk 11>;
-	resets = <&peri_rst 11>;
-};

Documentation/devicetree/bindings/spi/ti_qspi.txt

@@ -29,7 +29,7 @@ modification to bootloader.
 Example:
 
 For am4372:
-qspi: qspi@4b300000 {
+qspi: qspi@47900000 {
 	compatible = "ti,am4372-qspi";
 	reg = <0x47900000 0x100>, <0x30000000 0x4000000>;
 	reg-names = "qspi_base", "qspi_mmap";

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -633,6 +633,8 @@ patternProperties:
     description: Microsoft Corporation
   "^mikroe,.*":
     description: MikroElektronika d.o.o.
+  "^mikrotik,.*":
+    description: MikroTik
   "^miniand,.*":
     description: Miniand Tech
   "^minix,.*":

MAINTAINERS

@@ -899,6 +899,11 @@ F:	drivers/gpu/drm/amd/include/v9_structs.h
 F:	drivers/gpu/drm/amd/include/vi_structs.h
 F:	include/uapi/linux/kfd_ioctl.h
 
+AMD SPI DRIVER
+M:	Sanjay R Mehta <sanju.mehta@amd.com>
+S:	Maintained
+F:	drivers/spi/spi-amd.c
+
 AMD MP2 I2C DRIVER
 M:	Elie Morisse <syniurge@gmail.com>
 M:	Nehal Shah <nehal-bakulchandra.shah@amd.com>

drivers/spi/Kconfig

@@ -226,17 +226,20 @@ config SPI_DESIGNWARE
 	help
 	  general driver for SPI controller core from DesignWare
 
+if SPI_DESIGNWARE
+
+config SPI_DW_DMA
+	bool "DMA support for DW SPI controller"
+
 config SPI_DW_PCI
 	tristate "PCI interface driver for DW SPI core"
-	depends on SPI_DESIGNWARE && PCI
-
-config SPI_DW_MID_DMA
-	bool "DMA support for DW SPI controller on Intel MID platform"
-	depends on SPI_DW_PCI && DW_DMAC_PCI
+	depends on PCI
 
 config SPI_DW_MMIO
 	tristate "Memory-mapped io interface driver for DW SPI core"
-	depends on SPI_DESIGNWARE
+	depends on HAS_IOMEM
+
+endif
 
 config SPI_DLN2
        tristate "Diolan DLN-2 USB SPI adapter"
@@ -844,6 +847,7 @@ config SPI_TXX9
 config SPI_UNIPHIER
 	tristate "Socionext UniPhier SPI Controller"
 	depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
+	depends on HAS_IOMEM
 	help
 	  This enables a driver for the Socionext UniPhier SoC SCSSI SPI controller.
 
@@ -910,6 +914,12 @@ config SPI_ZYNQMP_GQSPI
 	help
 	  Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC.
 
+config SPI_AMD
+	tristate "AMD SPI controller"
+	depends on SPI_MASTER || COMPILE_TEST
+	help
+	  Enables SPI controller driver for AMD SoC.
+
 #
 # Add new SPI master controllers in alphabetical order above this line
 #

drivers/spi/Makefile

@@ -36,9 +36,10 @@ obj-$(CONFIG_SPI_COLDFIRE_QSPI)		+= spi-coldfire-qspi.o
 obj-$(CONFIG_SPI_DAVINCI)		+= spi-davinci.o
 obj-$(CONFIG_SPI_DLN2)			+= spi-dln2.o
 obj-$(CONFIG_SPI_DESIGNWARE)		+= spi-dw.o
+spi-dw-y				:= spi-dw-core.o
+spi-dw-$(CONFIG_SPI_DW_DMA)		+= spi-dw-dma.o
 obj-$(CONFIG_SPI_DW_MMIO)		+= spi-dw-mmio.o
-obj-$(CONFIG_SPI_DW_PCI)		+= spi-dw-midpci.o
-spi-dw-midpci-objs			:= spi-dw-pci.o spi-dw-mid.o
+obj-$(CONFIG_SPI_DW_PCI)		+= spi-dw-pci.o
 obj-$(CONFIG_SPI_EFM32)			+= spi-efm32.o
 obj-$(CONFIG_SPI_EP93XX)		+= spi-ep93xx.o
 obj-$(CONFIG_SPI_FALCON)		+= spi-falcon.o
@@ -127,6 +128,7 @@ obj-$(CONFIG_SPI_XLP)			+= spi-xlp.o
 obj-$(CONFIG_SPI_XTENSA_XTFPGA)		+= spi-xtensa-xtfpga.o
 obj-$(CONFIG_SPI_ZYNQ_QSPI)		+= spi-zynq-qspi.o
 obj-$(CONFIG_SPI_ZYNQMP_GQSPI)		+= spi-zynqmp-gqspi.o
+obj-$(CONFIG_SPI_AMD)			+= spi-amd.o
 
 # SPI slave protocol handlers
 obj-$(CONFIG_SPI_SLAVE_TIME)		+= spi-slave-time.o

drivers/spi/spi-amd.c

+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+//
+// AMD SPI controller driver
+//
+// Copyright (c) 2020, Advanced Micro Devices, Inc.
+//
+// Author: Sanjay R Mehta <sanju.mehta@amd.com>
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+
+#define AMD_SPI_CTRL0_REG	0x00
+#define AMD_SPI_EXEC_CMD	BIT(16)
+#define AMD_SPI_FIFO_CLEAR	BIT(20)
+#define AMD_SPI_BUSY		BIT(31)
+
+#define AMD_SPI_OPCODE_MASK	0xFF
+
+#define AMD_SPI_ALT_CS_REG	0x1D
+#define AMD_SPI_ALT_CS_MASK	0x3
+
+#define AMD_SPI_FIFO_BASE	0x80
+#define AMD_SPI_TX_COUNT_REG	0x48
+#define AMD_SPI_RX_COUNT_REG	0x4B
+#define AMD_SPI_STATUS_REG	0x4C
+
+#define AMD_SPI_MEM_SIZE	200
+
+/* M_CMD OP codes for SPI */
+#define AMD_SPI_XFER_TX		1
+#define AMD_SPI_XFER_RX		2
+
+struct amd_spi {
+	void __iomem *io_remap_addr;
+	unsigned long io_base_addr;
+	u32 rom_addr;
+	u8 chip_select;
+};
+
+static inline u8 amd_spi_readreg8(struct spi_master *master, int idx)
+{
+	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+
+	return ioread8((u8 __iomem *)amd_spi->io_remap_addr + idx);
+}
+
+static inline void amd_spi_writereg8(struct spi_master *master, int idx,
+				     u8 val)
+{
+	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+
+	iowrite8(val, ((u8 __iomem *)amd_spi->io_remap_addr + idx));
+}
+
+static inline void amd_spi_setclear_reg8(struct spi_master *master, int idx,
+					 u8 set, u8 clear)
+{
+	u8 tmp = amd_spi_readreg8(master, idx);
+
+	tmp = (tmp & ~clear) | set;
+	amd_spi_writereg8(master, idx, tmp);
+}
+
+static inline u32 amd_spi_readreg32(struct spi_master *master, int idx)
+{
+	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+
+	return ioread32((u8 __iomem *)amd_spi->io_remap_addr + idx);
+}
+
+static inline void amd_spi_writereg32(struct spi_master *master, int idx,
+				      u32 val)
+{
+	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+
+	iowrite32(val, ((u8 __iomem *)amd_spi->io_remap_addr + idx));
+}
+
+static inline void amd_spi_setclear_reg32(struct spi_master *master, int idx,
+					  u32 set, u32 clear)
+{
+	u32 tmp = amd_spi_readreg32(master, idx);
+
+	tmp = (tmp & ~clear) | set;
+	amd_spi_writereg32(master, idx, tmp);
+}
+
+static void amd_spi_select_chip(struct spi_master *master)
+{
+	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+	u8 chip_select = amd_spi->chip_select;
+
+	amd_spi_setclear_reg8(master, AMD_SPI_ALT_CS_REG, chip_select,
+			      AMD_SPI_ALT_CS_MASK);
+}
+
+static void amd_spi_clear_fifo_ptr(struct spi_master *master)
+{
+	amd_spi_setclear_reg32(master, AMD_SPI_CTRL0_REG, AMD_SPI_FIFO_CLEAR,
+			       AMD_SPI_FIFO_CLEAR);
+}
+
+static void amd_spi_set_opcode(struct spi_master *master, u8 cmd_opcode)
+{
+	amd_spi_setclear_reg32(master, AMD_SPI_CTRL0_REG, cmd_opcode,
+			       AMD_SPI_OPCODE_MASK);
+}
+
+static inline void amd_spi_set_rx_count(struct spi_master *master,
+					u8 rx_count)
+{
+	amd_spi_setclear_reg8(master, AMD_SPI_RX_COUNT_REG, rx_count, 0xff);
+}
+
+static inline void amd_spi_set_tx_count(struct spi_master *master,
+					u8 tx_count)
+{
+	amd_spi_setclear_reg8(master, AMD_SPI_TX_COUNT_REG, tx_count, 0xff);
+}
+
+static inline int amd_spi_busy_wait(struct amd_spi *amd_spi)
+{
+	bool spi_busy;
+	int timeout = 100000;
+
+	/* poll for SPI bus to become idle */
+	spi_busy = (ioread32((u8 __iomem *)amd_spi->io_remap_addr +
+		    AMD_SPI_CTRL0_REG) & AMD_SPI_BUSY) == AMD_SPI_BUSY;
+	while (spi_busy) {
+		usleep_range(10, 20);
+		if (timeout-- < 0)
+			return -ETIMEDOUT;
+
+		spi_busy = (ioread32((u8 __iomem *)amd_spi->io_remap_addr +
+			    AMD_SPI_CTRL0_REG) & AMD_SPI_BUSY) == AMD_SPI_BUSY;
+	}
+
+	return 0;
+}
+
+static void amd_spi_execute_opcode(struct spi_master *master)
+{
+	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+
+	/* Set ExecuteOpCode bit in the CTRL0 register */
+	amd_spi_setclear_reg32(master, AMD_SPI_CTRL0_REG, AMD_SPI_EXEC_CMD,
+			       AMD_SPI_EXEC_CMD);
+
+	amd_spi_busy_wait(amd_spi);
+}
+
+static int amd_spi_master_setup(struct spi_device *spi)
+{
+	struct spi_master *master = spi->master;
+
+	amd_spi_clear_fifo_ptr(master);
+
+	return 0;
+}
+
+static inline int amd_spi_fifo_xfer(struct amd_spi *amd_spi,
+				    struct spi_master *master,
+				    struct spi_message *message)
+{
+	struct spi_transfer *xfer = NULL;
+	u8 cmd_opcode;
+	u8 *buf = NULL;
+	u32 m_cmd = 0;
+	u32 i = 0;
+	u32 tx_len = 0, rx_len = 0;
+
+	list_for_each_entry(xfer, &message->transfers,
+			    transfer_list) {
+		if (xfer->rx_buf)
+			m_cmd = AMD_SPI_XFER_RX;
+		if (xfer->tx_buf)
+			m_cmd = AMD_SPI_XFER_TX;
+
+		if (m_cmd & AMD_SPI_XFER_TX) {
+			buf = (u8 *)xfer->tx_buf;
+			tx_len = xfer->len - 1;
+			cmd_opcode = *(u8 *)xfer->tx_buf;
+			buf++;
+			amd_spi_set_opcode(master, cmd_opcode);
+
+			/* Write data into the FIFO. */
+			for (i = 0; i < tx_len; i++) {
+				iowrite8(buf[i],
+					 ((u8 __iomem *)amd_spi->io_remap_addr +
+					 AMD_SPI_FIFO_BASE + i));
+			}
+
+			amd_spi_set_tx_count(master, tx_len);
+			amd_spi_clear_fifo_ptr(master);
+			/* Execute command */
+			amd_spi_execute_opcode(master);
+		}
+		if (m_cmd & AMD_SPI_XFER_RX) {
+			/*
+			 * Store no. of bytes to be received from
+			 * FIFO
+			 */
+			rx_len = xfer->len;
+			buf = (u8 *)xfer->rx_buf;
+			amd_spi_set_rx_count(master, rx_len);
+			amd_spi_clear_fifo_ptr(master);
+			/* Execute command */
+			amd_spi_execute_opcode(master);
+			/* Read data from FIFO to receive buffer  */
+			for (i = 0; i < rx_len; i++)
+				buf[i] = amd_spi_readreg8(master,
+							  AMD_SPI_FIFO_BASE +
+							  tx_len + i);
+		}
+	}
+
+	/* Update statistics */
+	message->actual_length = tx_len + rx_len + 1;
+	/* complete the transaction */
+	message->status = 0;
+	spi_finalize_current_message(master);
+
+	return 0;
+}
+
+static int amd_spi_master_transfer(struct spi_master *master,
+				   struct spi_message *msg)
+{
+	struct amd_spi *amd_spi = spi_master_get_devdata(master);
+	struct spi_device *spi = msg->spi;
+
+	amd_spi->chip_select = spi->chip_select;
+	amd_spi_select_chip(master);
+
+	/*
+	 * Extract spi_transfers from the spi message and
+	 * program the controller.
+	 */
+	amd_spi_fifo_xfer(amd_spi, master, msg);
+
+	return 0;
+}
+
+static int amd_spi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct spi_master *master;
+	struct amd_spi *amd_spi;
+	struct resource *res;
+	int err = 0;
+
+	/* Allocate storage for spi_master and driver private data */
+	master = spi_alloc_master(dev, sizeof(struct amd_spi));
+	if (!master) {
+		dev_err(dev, "Error allocating SPI master\n");
+		return -ENOMEM;
+	}
+
+	amd_spi = spi_master_get_devdata(master);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	amd_spi->io_remap_addr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(amd_spi->io_remap_addr)) {
+		err = PTR_ERR(amd_spi->io_remap_addr);
+		dev_err(dev, "error %d ioremap of SPI registers failed\n", err);
+		goto err_free_master;
+	}
+	dev_dbg(dev, "io_remap_address: %p\n", amd_spi->io_remap_addr);
+
+	/* Initialize the spi_master fields */
+	master->bus_num = 0;
+	master->num_chipselect = 4;
+	master->mode_bits = 0;
+	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->setup = amd_spi_master_setup;
+	master->transfer_one_message = amd_spi_master_transfer;
+
+	/* Register the controller with SPI framework */
+	err = devm_spi_register_master(dev, master);
+	if (err) {
+		dev_err(dev, "error %d registering SPI controller\n", err);
+		goto err_free_master;
+	}
+
+	return 0;
+
+err_free_master:
+	spi_master_put(master);
+
+	return err;
+}
+
+static const struct acpi_device_id spi_acpi_match[] = {
+	{ "AMDI0061", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, spi_acpi_match);
+
+static struct platform_driver amd_spi_driver = {
+	.driver = {
+		.name = "amd_spi",
+		.acpi_match_table = ACPI_PTR(spi_acpi_match),
+	},
+	.probe = amd_spi_probe,
+};
+
+module_platform_driver(amd_spi_driver);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Sanjay Mehta <sanju.mehta@amd.com>");
+MODULE_DESCRIPTION("AMD SPI Master Controller Driver");

drivers/spi/spi-armada-3700.c

@@ -276,11 +276,11 @@ static int a3700_spi_fifo_flush(struct a3700_spi *a3700_spi)
 	return -ETIMEDOUT;
 }
 
-static int a3700_spi_init(struct a3700_spi *a3700_spi)
+static void a3700_spi_init(struct a3700_spi *a3700_spi)
 {
 	struct spi_master *master = a3700_spi->master;
 	u32 val;
-	int i, ret = 0;
+	int i;
 
 	/* Reset SPI unit */
 	val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
@@ -311,8 +311,6 @@ static int a3700_spi_init(struct a3700_spi *a3700_spi)
 	/* Mask the interrupts and clear cause bits */
 	spireg_write(a3700_spi, A3700_SPI_INT_MASK_REG, 0);
 	spireg_write(a3700_spi, A3700_SPI_INT_STAT_REG, ~0U);
-
-	return ret;
 }
 
 static irqreturn_t a3700_spi_interrupt(int irq, void *dev_id)
@@ -886,9 +884,7 @@ static int a3700_spi_probe(struct platform_device *pdev)
 	master->min_speed_hz = DIV_ROUND_UP(clk_get_rate(spi->clk),
 						A3700_SPI_MAX_PRESCALE);
 
-	ret = a3700_spi_init(spi);
-	if (ret)
-		goto error_clk;
+	a3700_spi_init(spi);
 
 	ret = devm_request_irq(dev, spi->irq, a3700_spi_interrupt, 0,
 			       dev_name(dev), master);

drivers/spi/spi-atmel.c

@@ -706,6 +706,7 @@ static void atmel_spi_next_xfer_pio(struct spi_master *master,
 static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
 				struct spi_transfer *xfer,
 				u32 *plen)
+	__must_hold(&as->lock)
 {
 	struct atmel_spi	*as = spi_master_get_devdata(master);
 	struct dma_chan		*rxchan = master->dma_rx;

drivers/spi/spi-axi-spi-engine.c

@@ -489,22 +489,6 @@ static int spi_engine_probe(struct platform_device *pdev)
 
 	spin_lock_init(&spi_engine->lock);
 
-	spi_engine->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(spi_engine->base)) {
-		ret = PTR_ERR(spi_engine->base);
-		goto err_put_master;
-	}
-
-	version = readl(spi_engine->base + SPI_ENGINE_REG_VERSION);
-	if (SPI_ENGINE_VERSION_MAJOR(version) != 1) {
-		dev_err(&pdev->dev, "Unsupported peripheral version %u.%u.%c\n",
-			SPI_ENGINE_VERSION_MAJOR(version),
-			SPI_ENGINE_VERSION_MINOR(version),
-			SPI_ENGINE_VERSION_PATCH(version));
-		ret = -ENODEV;
-		goto err_put_master;
-	}
-
 	spi_engine->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
 	if (IS_ERR(spi_engine->clk)) {
 		ret = PTR_ERR(spi_engine->clk);
@@ -525,6 +509,22 @@ static int spi_engine_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_clk_disable;
 
+	spi_engine->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(spi_engine->base)) {
+		ret = PTR_ERR(spi_engine->base);
+		goto err_ref_clk_disable;
+	}
+
+	version = readl(spi_engine->base + SPI_ENGINE_REG_VERSION);
+	if (SPI_ENGINE_VERSION_MAJOR(version) != 1) {
+		dev_err(&pdev->dev, "Unsupported peripheral version %u.%u.%c\n",
+			SPI_ENGINE_VERSION_MAJOR(version),
+			SPI_ENGINE_VERSION_MINOR(version),
+			SPI_ENGINE_VERSION_PATCH(version));
+		ret = -ENODEV;
+		goto err_ref_clk_disable;
+	}
+
 	writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_RESET);
 	writel_relaxed(0xff, spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
 	writel_relaxed(0x00, spi_engine->base + SPI_ENGINE_REG_INT_ENABLE);

drivers/spi/spi-bcm-qspi.c

@@ -91,6 +91,7 @@
 #define MSPI_MSPI_STATUS			0x020
 #define MSPI_CPTQP				0x024
 #define MSPI_SPCR3				0x028
+#define MSPI_REV				0x02c
 #define MSPI_TXRAM				0x040
 #define MSPI_RXRAM				0x0c0
 #define MSPI_CDRAM				0x140
@@ -106,14 +107,22 @@
 #define MSPI_SPCR2_SPE				BIT(6)
 #define MSPI_SPCR2_CONT_AFTER_CMD		BIT(7)
 
+#define MSPI_SPCR3_FASTBR			BIT(0)
+#define MSPI_SPCR3_FASTDT			BIT(1)
+#define MSPI_SPCR3_SYSCLKSEL_MASK		GENMASK(11, 10)
+#define MSPI_SPCR3_SYSCLKSEL_27			(MSPI_SPCR3_SYSCLKSEL_MASK & \
+						 ~(BIT(10) | BIT(11)))
+#define MSPI_SPCR3_SYSCLKSEL_108		(MSPI_SPCR3_SYSCLKSEL_MASK & \
+						 BIT(11))
+
 #define MSPI_MSPI_STATUS_SPIF			BIT(0)
 
 #define INTR_BASE_BIT_SHIFT			0x02
 #define INTR_COUNT				0x07
 
 #define NUM_CHIPSELECT				4
-#define QSPI_SPBR_MIN				8U
 #define QSPI_SPBR_MAX				255U
+#define MSPI_BASE_FREQ				27000000UL
 
 #define OPCODE_DIOR				0xBB
 #define OPCODE_QIOR				0xEB
@@ -217,6 +226,9 @@ struct bcm_qspi {
 	struct bcm_qspi_dev_id *dev_ids;
 	struct completion mspi_done;
 	struct completion bspi_done;
+	u8 mspi_maj_rev;
+	u8 mspi_min_rev;
+	bool mspi_spcr3_sysclk;
 };
 
 static inline bool has_bspi(struct bcm_qspi *qspi)
@@ -224,6 +236,36 @@ static inline bool has_bspi(struct bcm_qspi *qspi)
 	return qspi->bspi_mode;
 }
 
+/* hardware supports spcr3 and fast baud-rate  */
+static inline bool bcm_qspi_has_fastbr(struct bcm_qspi *qspi)
+{
+	if (!has_bspi(qspi) &&
+	    ((qspi->mspi_maj_rev >= 1) &&
+	     (qspi->mspi_min_rev >= 5)))
+		return true;
+
+	return false;
+}
+
+/* hardware supports sys clk 108Mhz  */
+static inline bool bcm_qspi_has_sysclk_108(struct bcm_qspi *qspi)
+{
+	if (!has_bspi(qspi) && (qspi->mspi_spcr3_sysclk ||
+	    ((qspi->mspi_maj_rev >= 1) &&
+	     (qspi->mspi_min_rev >= 6))))
+		return true;
+
+	return false;
+}
+
+static inline int bcm_qspi_spbr_min(struct bcm_qspi *qspi)
+{
+	if (bcm_qspi_has_fastbr(qspi))
+		return 1;
+	else
+		return 8;
+}
+
 /* Read qspi controller register*/
 static inline u32 bcm_qspi_read(struct bcm_qspi *qspi, enum base_type type,
 				unsigned int offset)
@@ -531,16 +573,39 @@ static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi,
 	if (xp->speed_hz)
 		spbr = qspi->base_clk / (2 * xp->speed_hz);
 
-	spcr = clamp_val(spbr, QSPI_SPBR_MIN, QSPI_SPBR_MAX);
+	spcr = clamp_val(spbr, bcm_qspi_spbr_min(qspi), QSPI_SPBR_MAX);
 	bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, spcr);
 
-	spcr = MSPI_MASTER_BIT;
+	if (!qspi->mspi_maj_rev)
+		/* legacy controller */
+		spcr = MSPI_MASTER_BIT;
+	else
+		spcr = 0;
+
 	/* for 16 bit the data should be zero */
 	if (xp->bits_per_word != 16)
 		spcr |= xp->bits_per_word << 2;
 	spcr |= xp->mode & 3;
+
 	bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_MSB, spcr);
 
+	if (bcm_qspi_has_fastbr(qspi)) {
+		spcr = 0;
+
+		/* enable fastbr */
+		spcr |=	MSPI_SPCR3_FASTBR;
+
+		if (bcm_qspi_has_sysclk_108(qspi)) {
+			/* SYSCLK_108 */
+			spcr |= MSPI_SPCR3_SYSCLKSEL_108;
+			qspi->base_clk = MSPI_BASE_FREQ * 4;
+			/* Change spbr as we changed sysclk */
+			bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, 4);
+		}
+
+		bcm_qspi_write(qspi, MSPI, MSPI_SPCR3, spcr);
+	}
+
 	qspi->last_parms = *xp;
 }
 
@@ -612,19 +677,15 @@ static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
 		if (qt->trans->cs_change &&
 		    (flags & TRANS_STATUS_BREAK_CS_CHANGE))
 			ret |= TRANS_STATUS_BREAK_CS_CHANGE;
-		if (ret)
-			goto done;
 
-		dev_dbg(&qspi->pdev->dev, "advance msg exit\n");
 		if (bcm_qspi_mspi_transfer_is_last(qspi, qt))
-			ret = TRANS_STATUS_BREAK_EOM;
+			ret |= TRANS_STATUS_BREAK_EOM;
 		else
-			ret = TRANS_STATUS_BREAK_NO_BYTES;
+			ret |= TRANS_STATUS_BREAK_NO_BYTES;
 
 		qt->trans = NULL;
 	}
 
-done:
 	dev_dbg(&qspi->pdev->dev, "trans %p len %d byte %d ret %x\n",
 		qt->trans, qt->trans ? qt->trans->len : 0, qt->byte, ret);
 	return ret;
@@ -670,7 +731,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
 			if (buf)
 				buf[tp.byte] = read_rxram_slot_u8(qspi, slot);
 			dev_dbg(&qspi->pdev->dev, "RD %02x\n",
-				buf ? buf[tp.byte] : 0xff);
+				buf ? buf[tp.byte] : 0x0);
 		} else {
 			u16 *buf = tp.trans->rx_buf;
 
@@ -678,7 +739,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
 				buf[tp.byte / 2] = read_rxram_slot_u16(qspi,
 								      slot);
 			dev_dbg(&qspi->pdev->dev, "RD %04x\n",
-				buf ? buf[tp.byte] : 0xffff);
+				buf ? buf[tp.byte / 2] : 0x0);
 		}
 
 		update_qspi_trans_byte_count(qspi, &tp,
@@ -733,13 +794,13 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
 	while (!tstatus && slot < MSPI_NUM_CDRAM) {
 		if (tp.trans->bits_per_word <= 8) {
 			const u8 *buf = tp.trans->tx_buf;
-			u8 val = buf ? buf[tp.byte] : 0xff;
+			u8 val = buf ? buf[tp.byte] : 0x00;
 
 			write_txram_slot_u8(qspi, slot, val);
 			dev_dbg(&qspi->pdev->dev, "WR %02x\n", val);
 		} else {
 			const u16 *buf = tp.trans->tx_buf;
-			u16 val = buf ? buf[tp.byte / 2] : 0xffff;
+			u16 val = buf ? buf[tp.byte / 2] : 0x0000;
 
 			write_txram_slot_u16(qspi, slot, val);
 			dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);
@@ -771,7 +832,16 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
 	bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0);
 	bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, slot - 1);
 
-	if (tstatus & TRANS_STATUS_BREAK_DESELECT) {
+	/*
+	 *  case 1) EOM =1, cs_change =0: SSb inactive
+	 *  case 2) EOM =1, cs_change =1: SSb stay active
+	 *  case 3) EOM =0, cs_change =0: SSb stay active
+	 *  case 4) EOM =0, cs_change =1: SSb inactive
+	 */
+	if (((tstatus & TRANS_STATUS_BREAK_DESELECT)
+	     == TRANS_STATUS_BREAK_CS_CHANGE) ||
+	    ((tstatus & TRANS_STATUS_BREAK_DESELECT)
+	     == TRANS_STATUS_BREAK_EOM)) {
 		mspi_cdram = read_cdram_slot(qspi, slot - 1) &
 			~MSPI_CDRAM_CONT_BIT;
 		write_cdram_slot(qspi, slot - 1, mspi_cdram);
@@ -1190,8 +1260,51 @@ static const struct spi_controller_mem_ops bcm_qspi_mem_ops = {
 	.exec_op = bcm_qspi_exec_mem_op,
 };
 
+struct bcm_qspi_data {
+	bool	has_mspi_rev;
+	bool	has_spcr3_sysclk;
+};
+
+static const struct bcm_qspi_data bcm_qspi_no_rev_data = {
+	.has_mspi_rev	= false,
+	.has_spcr3_sysclk = false,
+};
+
+static const struct bcm_qspi_data bcm_qspi_rev_data = {
+	.has_mspi_rev	= true,
+	.has_spcr3_sysclk = false,
+};
+
+static const struct bcm_qspi_data bcm_qspi_spcr3_data = {
+	.has_mspi_rev	= true,
+	.has_spcr3_sysclk = true,
+};
+
 static const struct of_device_id bcm_qspi_of_match[] = {
-	{ .compatible = "brcm,spi-bcm-qspi" },
+	{
+		.compatible = "brcm,spi-bcm7425-qspi",
+		.data = &bcm_qspi_no_rev_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm7429-qspi",
+		.data = &bcm_qspi_no_rev_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm7435-qspi",
+		.data = &bcm_qspi_no_rev_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm-qspi",
+		.data = &bcm_qspi_rev_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm7216-qspi",
+		.data = &bcm_qspi_spcr3_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm7278-qspi",
+		.data = &bcm_qspi_spcr3_data,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
@@ -1199,12 +1312,15 @@ MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
 int bcm_qspi_probe(struct platform_device *pdev,
 		   struct bcm_qspi_soc_intc *soc_intc)
 {
+	const struct of_device_id *of_id = NULL;
+	const struct bcm_qspi_data *data;
 	struct device *dev = &pdev->dev;
 	struct bcm_qspi *qspi;
 	struct spi_master *master;
 	struct resource *res;
 	int irq, ret = 0, num_ints = 0;
 	u32 val;
+	u32 rev = 0;
 	const char *name = NULL;
 	int num_irqs = ARRAY_SIZE(qspi_irq_tab);
 
@@ -1212,9 +1328,12 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	if (!dev->of_node)
 		return -ENODEV;
 
-	if (!of_match_node(bcm_qspi_of_match, dev->of_node))
+	of_id = of_match_node(bcm_qspi_of_match, dev->of_node);
+	if (!of_id)
 		return -ENODEV;
 
+	data = of_id->data;
+
 	master = spi_alloc_master(dev, sizeof(struct bcm_qspi));
 	if (!master) {
 		dev_err(dev, "error allocating spi_master\n");
@@ -1222,6 +1341,11 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	}
 
 	qspi = spi_master_get_devdata(master);
+
+	qspi->clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(qspi->clk))
+		return PTR_ERR(qspi->clk);
+
 	qspi->pdev = pdev;
 	qspi->trans_pos.trans = NULL;
 	qspi->trans_pos.byte = 0;
@@ -1335,13 +1459,6 @@ int bcm_qspi_probe(struct platform_device *pdev,
 		qspi->soc_intc = NULL;
 	}
 
-	qspi->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(qspi->clk)) {
-		dev_warn(dev, "unable to get clock\n");
-		ret = PTR_ERR(qspi->clk);
-		goto qspi_probe_err;
-	}
-
 	ret = clk_prepare_enable(qspi->clk);
 	if (ret) {
 		dev_err(dev, "failed to prepare clock\n");
@@ -1349,7 +1466,19 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	}
 
 	qspi->base_clk = clk_get_rate(qspi->clk);
-	qspi->max_speed_hz = qspi->base_clk / (QSPI_SPBR_MIN * 2);
+
+	if (data->has_mspi_rev) {
+		rev = bcm_qspi_read(qspi, MSPI, MSPI_REV);
+		/* some older revs do not have a MSPI_REV register */
+		if ((rev & 0xff) == 0xff)
+			rev = 0;
+	}
+
+	qspi->mspi_maj_rev = (rev >> 4) & 0xf;
+	qspi->mspi_min_rev = rev & 0xf;
+	qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk;
+
+	qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2);
 
 	bcm_qspi_hw_init(qspi);
 	init_completion(&qspi->mspi_done);
@@ -1406,7 +1535,7 @@ static int __maybe_unused bcm_qspi_suspend(struct device *dev)
 			bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
 
 	spi_master_suspend(qspi->master);
-	clk_disable(qspi->clk);
+	clk_disable_unprepare(qspi->clk);
 	bcm_qspi_hw_uninit(qspi);
 
 	return 0;
@@ -1424,7 +1553,7 @@ static int __maybe_unused bcm_qspi_resume(struct device *dev)
 		qspi->soc_intc->bcm_qspi_int_set(qspi->soc_intc, MSPI_DONE,
 						 true);
 
-	ret = clk_enable(qspi->clk);
+	ret = clk_prepare_enable(qspi->clk);
 	if (!ret)
 		spi_master_resume(qspi->master);
 

drivers/spi/spi-bcm2835.c

@@ -191,12 +191,12 @@ static void bcm2835_debugfs_remove(struct bcm2835_spi *bs)
 }
 #endif /* CONFIG_DEBUG_FS */
 
-static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg)
+static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned int reg)
 {
 	return readl(bs->regs + reg);
 }
 
-static inline void bcm2835_wr(struct bcm2835_spi *bs, unsigned reg, u32 val)
+static inline void bcm2835_wr(struct bcm2835_spi *bs, unsigned int reg, u32 val)
 {
 	writel(val, bs->regs + reg);
 }
@@ -940,6 +940,7 @@ static int bcm2835_dma_init(struct spi_controller *ctlr, struct device *dev,
 	if (dma_mapping_error(ctlr->dma_tx->device->dev, bs->fill_tx_addr)) {
 		dev_err(dev, "cannot map zero page - not using DMA mode\n");
 		bs->fill_tx_addr = 0;
+		ret = -ENOMEM;
 		goto err_release;
 	}
 
@@ -949,6 +950,7 @@ static int bcm2835_dma_init(struct spi_controller *ctlr, struct device *dev,
 						     DMA_MEM_TO_DEV, 0);
 	if (!bs->fill_tx_desc) {
 		dev_err(dev, "cannot prepare fill_tx_desc - not using DMA mode\n");
+		ret = -ENOMEM;
 		goto err_release;
 	}
 
@@ -979,6 +981,7 @@ static int bcm2835_dma_init(struct spi_controller *ctlr, struct device *dev,
 	if (dma_mapping_error(ctlr->dma_rx->device->dev, bs->clear_rx_addr)) {
 		dev_err(dev, "cannot map clear_rx_cs - not using DMA mode\n");
 		bs->clear_rx_addr = 0;
+		ret = -ENOMEM;
 		goto err_release;
 	}
 
@@ -989,6 +992,7 @@ static int bcm2835_dma_init(struct spi_controller *ctlr, struct device *dev,
 					   DMA_MEM_TO_DEV, 0);
 		if (!bs->clear_rx_desc[i]) {
 			dev_err(dev, "cannot prepare clear_rx_desc - not using DMA mode\n");
+			ret = -ENOMEM;
 			goto err_release;
 		}
 
@@ -1347,7 +1351,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
 		goto out_dma_release;
 	}
 
-	err = devm_spi_register_controller(&pdev->dev, ctlr);
+	err = spi_register_controller(ctlr);
 	if (err) {
 		dev_err(&pdev->dev, "could not register SPI controller: %d\n",
 			err);
@@ -1374,17 +1378,28 @@ static int bcm2835_spi_remove(struct platform_device *pdev)
 
 	bcm2835_debugfs_remove(bs);
 
+	spi_unregister_controller(ctlr);
+
+	bcm2835_dma_release(ctlr, bs);
+
 	/* Clear FIFOs, and disable the HW block */
 	bcm2835_wr(bs, BCM2835_SPI_CS,
 		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
 
 	clk_disable_unprepare(bs->clk);
 
-	bcm2835_dma_release(ctlr, bs);
-
 	return 0;
 }
 
+static void bcm2835_spi_shutdown(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = bcm2835_spi_remove(pdev);
+	if (ret)
+		dev_err(&pdev->dev, "failed to shutdown\n");
+}
+
 static const struct of_device_id bcm2835_spi_match[] = {
 	{ .compatible = "brcm,bcm2835-spi", },
 	{}
@@ -1398,6 +1413,7 @@ static struct platform_driver bcm2835_spi_driver = {
 	},
 	.probe		= bcm2835_spi_probe,
 	.remove		= bcm2835_spi_remove,
+	.shutdown	= bcm2835_spi_shutdown,
 };
 module_platform_driver(bcm2835_spi_driver);
 

drivers/spi/spi-bcm2835aux.c

@@ -569,7 +569,7 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
 		goto out_clk_disable;
 	}
 
-	err = devm_spi_register_master(&pdev->dev, master);
+	err = spi_register_master(master);
 	if (err) {
 		dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
 		goto out_clk_disable;
@@ -593,6 +593,8 @@ static int bcm2835aux_spi_remove(struct platform_device *pdev)
 
 	bcm2835aux_debugfs_remove(bs);
 
+	spi_unregister_master(master);
+
 	bcm2835aux_spi_reset_hw(bs);
 
 	/* disable the HW block by releasing the clock */

drivers/spi/spi-dw-mmio.c

@@ -7,7 +7,6 @@
 
 #include <linux/clk.h>
 #include <linux/err.h>
-#include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
@@ -20,6 +19,7 @@
 #include <linux/acpi.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
+#include <linux/reset.h>
 
 #include "spi-dw.h"
 
@@ -30,6 +30,7 @@ struct dw_spi_mmio {
 	struct clk     *clk;
 	struct clk     *pclk;
 	void           *priv;
+	struct reset_control *rstc;
 };
 
 #define MSCC_CPU_SYSTEM_CTRL_GENERAL_CTRL	0x24
@@ -44,6 +45,13 @@ struct dw_spi_mmio {
 #define MSCC_SPI_MST_SW_MODE_SW_PIN_CTRL_MODE	BIT(13)
 #define MSCC_SPI_MST_SW_MODE_SW_SPI_CS(x)	(x << 5)
 
+/*
+ * For Keem Bay, CTRLR0[31] is used to select controller mode.
+ * 0: SSI is slave
+ * 1: SSI is master
+ */
+#define KEEMBAY_CTRLR0_SSIC_IS_MST		BIT(31)
+
 struct dw_spi_mscc {
 	struct regmap       *syscon;
 	void __iomem        *spi_mst;
@@ -106,6 +114,9 @@ static int dw_spi_mscc_init(struct platform_device *pdev,
 	dwsmmio->dws.set_cs = dw_spi_mscc_set_cs;
 	dwsmmio->priv = dwsmscc;
 
+	/* Register hook to configure CTRLR0 */
+	dwsmmio->dws.update_cr0 = dw_spi_update_cr0;
+
 	return 0;
 }
 
@@ -128,6 +139,49 @@ static int dw_spi_alpine_init(struct platform_device *pdev,
 {
 	dwsmmio->dws.cs_override = 1;
 
+	/* Register hook to configure CTRLR0 */
+	dwsmmio->dws.update_cr0 = dw_spi_update_cr0;
+
+	return 0;
+}
+
+static int dw_spi_dw_apb_init(struct platform_device *pdev,
+			      struct dw_spi_mmio *dwsmmio)
+{
+	/* Register hook to configure CTRLR0 */
+	dwsmmio->dws.update_cr0 = dw_spi_update_cr0;
+
+	dw_spi_dma_setup_generic(&dwsmmio->dws);
+
+	return 0;
+}
+
+static int dw_spi_dwc_ssi_init(struct platform_device *pdev,
+			       struct dw_spi_mmio *dwsmmio)
+{
+	/* Register hook to configure CTRLR0 */
+	dwsmmio->dws.update_cr0 = dw_spi_update_cr0_v1_01a;
+
+	dw_spi_dma_setup_generic(&dwsmmio->dws);
+
+	return 0;
+}
+
+static u32 dw_spi_update_cr0_keembay(struct spi_controller *master,
+				     struct spi_device *spi,
+				     struct spi_transfer *transfer)
+{
+	u32 cr0 = dw_spi_update_cr0_v1_01a(master, spi, transfer);
+
+	return cr0 | KEEMBAY_CTRLR0_SSIC_IS_MST;
+}
+
+static int dw_spi_keembay_init(struct platform_device *pdev,
+			       struct dw_spi_mmio *dwsmmio)
+{
+	/* Register hook to configure CTRLR0 */
+	dwsmmio->dws.update_cr0 = dw_spi_update_cr0_keembay;
+
 	return 0;
 }
 
@@ -136,6 +190,7 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 	int (*init_func)(struct platform_device *pdev,
 			 struct dw_spi_mmio *dwsmmio);
 	struct dw_spi_mmio *dwsmmio;
+	struct resource *mem;
 	struct dw_spi *dws;
 	int ret;
 	int num_cs;
@@ -148,11 +203,11 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 	dws = &dwsmmio->dws;
 
 	/* Get basic io resource and map it */
-	dws->regs = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(dws->regs)) {
-		dev_err(&pdev->dev, "SPI region map failed\n");
+	dws->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &mem);
+	if (IS_ERR(dws->regs))
 		return PTR_ERR(dws->regs);
-	}
+
+	dws->paddr = mem->start;
 
 	dws->irq = platform_get_irq(pdev, 0);
 	if (dws->irq < 0)
@@ -175,6 +230,14 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_clk;
 
+	/* find an optional reset controller */
+	dwsmmio->rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, "spi");
+	if (IS_ERR(dwsmmio->rstc)) {
+		ret = PTR_ERR(dwsmmio->rstc);
+		goto out_clk;
+	}
+	reset_control_deassert(dwsmmio->rstc);
+
 	dws->bus_num = pdev->id;
 
 	dws->max_freq = clk_get_rate(dwsmmio->clk);
@@ -208,6 +271,8 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 	clk_disable_unprepare(dwsmmio->pclk);
 out_clk:
 	clk_disable_unprepare(dwsmmio->clk);
+	reset_control_assert(dwsmmio->rstc);
+
 	return ret;
 }
 
@@ -219,25 +284,30 @@ static int dw_spi_mmio_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	clk_disable_unprepare(dwsmmio->pclk);
 	clk_disable_unprepare(dwsmmio->clk);
+	reset_control_assert(dwsmmio->rstc);
 
 	return 0;
 }
 
 static const struct of_device_id dw_spi_mmio_of_match[] = {
-	{ .compatible = "snps,dw-apb-ssi", },
+	{ .compatible = "snps,dw-apb-ssi", .data = dw_spi_dw_apb_init},
 	{ .compatible = "mscc,ocelot-spi", .data = dw_spi_mscc_ocelot_init},
 	{ .compatible = "mscc,jaguar2-spi", .data = dw_spi_mscc_jaguar2_init},
 	{ .compatible = "amazon,alpine-dw-apb-ssi", .data = dw_spi_alpine_init},
-	{ .compatible = "renesas,rzn1-spi", },
+	{ .compatible = "renesas,rzn1-spi", .data = dw_spi_dw_apb_init},
+	{ .compatible = "snps,dwc-ssi-1.01a", .data = dw_spi_dwc_ssi_init},
+	{ .compatible = "intel,keembay-ssi", .data = dw_spi_keembay_init},
 	{ /* end of table */}
 };
 MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
 
+#ifdef CONFIG_ACPI
 static const struct acpi_device_id dw_spi_mmio_acpi_match[] = {
-	{"HISI0173", 0},
+	{"HISI0173", (kernel_ulong_t)dw_spi_dw_apb_init},
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, dw_spi_mmio_acpi_match);
+#endif
 
 static struct platform_driver dw_spi_mmio_driver = {
 	.probe		= dw_spi_mmio_probe,

drivers/spi/spi-dw-pci.c

@@ -5,7 +5,6 @@
  * Copyright (c) 2009, 2014 Intel Corporation.
  */
 
-#include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
@@ -16,6 +15,15 @@
 
 #define DRIVER_NAME "dw_spi_pci"
 
+/* HW info for MRST Clk Control Unit, 32b reg per controller */
+#define MRST_SPI_CLK_BASE	100000000	/* 100m */
+#define MRST_CLK_SPI_REG	0xff11d86c
+#define CLK_SPI_BDIV_OFFSET	0
+#define CLK_SPI_BDIV_MASK	0x00000007
+#define CLK_SPI_CDIV_OFFSET	9
+#define CLK_SPI_CDIV_MASK	0x00000e00
+#define CLK_SPI_DISABLE_OFFSET	8
+
 struct spi_pci_desc {
 	int	(*setup)(struct dw_spi *);
 	u16	num_cs;
@@ -23,19 +31,55 @@ struct spi_pci_desc {
 	u32	max_freq;
 };
 
+static int spi_mid_init(struct dw_spi *dws)
+{
+	void __iomem *clk_reg;
+	u32 clk_cdiv;
+
+	clk_reg = ioremap(MRST_CLK_SPI_REG, 16);
+	if (!clk_reg)
+		return -ENOMEM;
+
+	/* Get SPI controller operating freq info */
+	clk_cdiv = readl(clk_reg + dws->bus_num * sizeof(u32));
+	clk_cdiv &= CLK_SPI_CDIV_MASK;
+	clk_cdiv >>= CLK_SPI_CDIV_OFFSET;
+	dws->max_freq = MRST_SPI_CLK_BASE / (clk_cdiv + 1);
+
+	iounmap(clk_reg);
+
+	/* Register hook to configure CTRLR0 */
+	dws->update_cr0 = dw_spi_update_cr0;
+
+	dw_spi_dma_setup_mfld(dws);
+
+	return 0;
+}
+
+static int spi_generic_init(struct dw_spi *dws)
+{
+	/* Register hook to configure CTRLR0 */
+	dws->update_cr0 = dw_spi_update_cr0;
+
+	dw_spi_dma_setup_generic(dws);
+
+	return 0;
+}
+
 static struct spi_pci_desc spi_pci_mid_desc_1 = {
-	.setup = dw_spi_mid_init,
+	.setup = spi_mid_init,
 	.num_cs = 5,
 	.bus_num = 0,
 };
 
 static struct spi_pci_desc spi_pci_mid_desc_2 = {
-	.setup = dw_spi_mid_init,
+	.setup = spi_mid_init,
 	.num_cs = 2,
 	.bus_num = 1,
 };
 
 static struct spi_pci_desc spi_pci_ehl_desc = {
+	.setup = spi_generic_init,
 	.num_cs = 2,
 	.bus_num = -1,
 	.max_freq = 100000000,

drivers/spi/spi-dw.h

@@ -2,18 +2,21 @@
 #ifndef DW_SPI_HEADER_H
 #define DW_SPI_HEADER_H
 
+#include <linux/completion.h>
+#include <linux/debugfs.h>
+#include <linux/irqreturn.h>
 #include <linux/io.h>
 #include <linux/scatterlist.h>
 
 /* Register offsets */
-#define DW_SPI_CTRL0			0x00
-#define DW_SPI_CTRL1			0x04
+#define DW_SPI_CTRLR0			0x00
+#define DW_SPI_CTRLR1			0x04
 #define DW_SPI_SSIENR			0x08
 #define DW_SPI_MWCR			0x0c
 #define DW_SPI_SER			0x10
 #define DW_SPI_BAUDR			0x14
-#define DW_SPI_TXFLTR			0x18
-#define DW_SPI_RXFLTR			0x1c
+#define DW_SPI_TXFTLR			0x18
+#define DW_SPI_RXFTLR			0x1c
 #define DW_SPI_TXFLR			0x20
 #define DW_SPI_RXFLR			0x24
 #define DW_SPI_SR			0x28
@@ -57,6 +60,15 @@
 #define SPI_SRL_OFFSET			11
 #define SPI_CFS_OFFSET			12
 
+/* Bit fields in CTRLR0 based on DWC_ssi_databook.pdf v1.01a */
+#define DWC_SSI_CTRLR0_SRL_OFFSET	13
+#define DWC_SSI_CTRLR0_TMOD_OFFSET	10
+#define DWC_SSI_CTRLR0_TMOD_MASK	GENMASK(11, 10)
+#define DWC_SSI_CTRLR0_SCPOL_OFFSET	9
+#define DWC_SSI_CTRLR0_SCPH_OFFSET	8
+#define DWC_SSI_CTRLR0_FRF_OFFSET	6
+#define DWC_SSI_CTRLR0_DFS_OFFSET	0
+
 /* Bit fields in SR, 7 bits */
 #define SR_MASK				0x7f		/* cover 7 bits */
 #define SR_BUSY				(1 << 0)
@@ -90,7 +102,7 @@ enum dw_ssi_type {
 
 struct dw_spi;
 struct dw_spi_dma_ops {
-	int (*dma_init)(struct dw_spi *dws);
+	int (*dma_init)(struct device *dev, struct dw_spi *dws);
 	void (*dma_exit)(struct dw_spi *dws);
 	int (*dma_setup)(struct dw_spi *dws, struct spi_transfer *xfer);
 	bool (*can_dma)(struct spi_controller *master, struct spi_device *spi,
@@ -114,6 +126,8 @@ struct dw_spi {
 	u16			bus_num;
 	u16			num_cs;		/* supported slave numbers */
 	void (*set_cs)(struct spi_device *spi, bool enable);
+	u32 (*update_cr0)(struct spi_controller *master, struct spi_device *spi,
+			  struct spi_transfer *transfer);
 
 	/* Current message transfer state info */
 	size_t			len;
@@ -124,24 +138,22 @@ struct dw_spi {
 	void			*rx_end;
 	int			dma_mapped;
 	u8			n_bytes;	/* current is a 1/2 bytes op */
-	u32			dma_width;
 	irqreturn_t		(*transfer_handler)(struct dw_spi *dws);
 	u32			current_freq;	/* frequency in hz */
 
 	/* DMA info */
-	int			dma_inited;
 	struct dma_chan		*txchan;
+	u32			txburst;
 	struct dma_chan		*rxchan;
+	u32			rxburst;
 	unsigned long		dma_chan_busy;
 	dma_addr_t		dma_addr; /* phy address of the Data register */
 	const struct dw_spi_dma_ops *dma_ops;
-	void			*dma_tx;
-	void			*dma_rx;
+	struct completion	dma_completion;
 
-	/* Bus interface info */
-	void			*priv;
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *debugfs;
+	struct debugfs_regset32 regset;
 #endif
 };
 
@@ -235,24 +247,28 @@ static inline void spi_shutdown_chip(struct dw_spi *dws)
 	spi_set_clk(dws, 0);
 }
 
-/*
- * Each SPI slave device to work with dw_api controller should
- * has such a structure claiming its working mode (poll or PIO/DMA),
- * which can be save in the "controller_data" member of the
- * struct spi_device.
- */
-struct dw_spi_chip {
-	u8 poll_mode;	/* 1 for controller polling mode */
-	u8 type;	/* SPI/SSP/MicroWire */
-	void (*cs_control)(u32 command);
-};
-
 extern void dw_spi_set_cs(struct spi_device *spi, bool enable);
 extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws);
 extern void dw_spi_remove_host(struct dw_spi *dws);
 extern int dw_spi_suspend_host(struct dw_spi *dws);
 extern int dw_spi_resume_host(struct dw_spi *dws);
+extern u32 dw_spi_update_cr0(struct spi_controller *master,
+			     struct spi_device *spi,
+			     struct spi_transfer *transfer);
+extern u32 dw_spi_update_cr0_v1_01a(struct spi_controller *master,
+				    struct spi_device *spi,
+				    struct spi_transfer *transfer);
+
+#ifdef CONFIG_SPI_DW_DMA
+
+extern void dw_spi_dma_setup_mfld(struct dw_spi *dws);
+extern void dw_spi_dma_setup_generic(struct dw_spi *dws);
+
+#else
+
+static inline void dw_spi_dma_setup_mfld(struct dw_spi *dws) {}
+static inline void dw_spi_dma_setup_generic(struct dw_spi *dws) {}
+
+#endif /* !CONFIG_SPI_DW_DMA */
 
-/* platform related setup */
-extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */
 #endif /* DW_SPI_HEADER_H */

drivers/spi/spi-ep93xx.c

@@ -31,7 +31,8 @@
 #include <linux/platform_data/spi-ep93xx.h>
 
 #define SSPCR0			0x0000
-#define SSPCR0_MODE_SHIFT	6
+#define SSPCR0_SPO		BIT(6)
+#define SSPCR0_SPH		BIT(7)
 #define SSPCR0_SCR_SHIFT	8
 
 #define SSPCR1			0x0004
@@ -159,7 +160,10 @@ static int ep93xx_spi_chip_setup(struct spi_master *master,
 		return err;
 
 	cr0 = div_scr << SSPCR0_SCR_SHIFT;
-	cr0 |= (spi->mode & (SPI_CPHA | SPI_CPOL)) << SSPCR0_MODE_SHIFT;
+	if (spi->mode & SPI_CPOL)
+		cr0 |= SSPCR0_SPO;
+	if (spi->mode & SPI_CPHA)
+		cr0 |= SSPCR0_SPH;
 	cr0 |= dss;
 
 	dev_dbg(&master->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",

drivers/spi/spi-fsl-dspi.c

 // SPDX-License-Identifier: GPL-2.0+
 //
 // Copyright 2013 Freescale Semiconductor, Inc.
+// Copyright 2020 NXP
 //
 // Freescale DSPI driver
 // This file contains a driver for the Freescale DSPI
@@ -26,6 +27,9 @@
 #define SPI_MCR_CLR_TXF			BIT(11)
 #define SPI_MCR_CLR_RXF			BIT(10)
 #define SPI_MCR_XSPI			BIT(3)
+#define SPI_MCR_DIS_TXF			BIT(13)
+#define SPI_MCR_DIS_RXF			BIT(12)
+#define SPI_MCR_HALT			BIT(0)
 
 #define SPI_TCR				0x08
 #define SPI_TCR_GET_TCNT(x)		(((x) & GENMASK(31, 16)) >> 16)
@@ -246,13 +250,33 @@ struct fsl_dspi {
 
 static void dspi_native_host_to_dev(struct fsl_dspi *dspi, u32 *txdata)
 {
-	memcpy(txdata, dspi->tx, dspi->oper_word_size);
+	switch (dspi->oper_word_size) {
+	case 1:
+		*txdata = *(u8 *)dspi->tx;
+		break;
+	case 2:
+		*txdata = *(u16 *)dspi->tx;
+		break;
+	case 4:
+		*txdata = *(u32 *)dspi->tx;
+		break;
+	}
 	dspi->tx += dspi->oper_word_size;
 }
 
 static void dspi_native_dev_to_host(struct fsl_dspi *dspi, u32 rxdata)
 {
-	memcpy(dspi->rx, &rxdata, dspi->oper_word_size);
+	switch (dspi->oper_word_size) {
+	case 1:
+		*(u8 *)dspi->rx = rxdata;
+		break;
+	case 2:
+		*(u16 *)dspi->rx = rxdata;
+		break;
+	case 4:
+		*(u32 *)dspi->rx = rxdata;
+		break;
+	}
 	dspi->rx += dspi->oper_word_size;
 }
 
@@ -1417,6 +1441,24 @@ static int dspi_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void dspi_shutdown(struct platform_device *pdev)
+{
+	struct spi_controller *ctlr = platform_get_drvdata(pdev);
+	struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
+
+	/* Disable RX and TX */
+	regmap_update_bits(dspi->regmap, SPI_MCR,
+			   SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF,
+			   SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF);
+
+	/* Stop Running */
+	regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_HALT, SPI_MCR_HALT);
+
+	dspi_release_dma(dspi);
+	clk_disable_unprepare(dspi->clk);
+	spi_unregister_controller(dspi->ctlr);
+}
+
 static struct platform_driver fsl_dspi_driver = {
 	.driver.name		= DRIVER_NAME,
 	.driver.of_match_table	= fsl_dspi_dt_ids,
@@ -1424,6 +1466,7 @@ static struct platform_driver fsl_dspi_driver = {
 	.driver.pm		= &dspi_pm,
 	.probe			= dspi_probe,
 	.remove			= dspi_remove,
+	.shutdown		= dspi_shutdown,
 };
 module_platform_driver(fsl_dspi_driver);
 

drivers/spi/spi-fsl-lpspi.c

@@ -186,14 +186,13 @@ static bool fsl_lpspi_can_dma(struct spi_controller *controller,
 
 	bytes_per_word = fsl_lpspi_bytes_per_word(transfer->bits_per_word);
 
-	switch (bytes_per_word)
-	{
-		case 1:
-		case 2:
-		case 4:
-			break;
-		default:
-			return false;
+	switch (bytes_per_word) {
+	case 1:
+	case 2:
+	case 4:
+		break;
+	default:
+		return false;
 	}
 
 	return true;
@@ -941,7 +940,7 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 	ret = pm_runtime_get_sync(fsl_lpspi->dev);
 	if (ret < 0) {
 		dev_err(fsl_lpspi->dev, "failed to enable clock\n");
-		goto out_controller_put;
+		goto out_pm_get;
 	}
 
 	temp = readl(fsl_lpspi->base + IMX7ULP_PARAM);
@@ -950,13 +949,15 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 
 	ret = fsl_lpspi_dma_init(&pdev->dev, fsl_lpspi, controller);
 	if (ret == -EPROBE_DEFER)
-		goto out_controller_put;
+		goto out_pm_get;
 
 	if (ret < 0)
 		dev_err(&pdev->dev, "dma setup error %d, use pio\n", ret);
 
 	return 0;
 
+out_pm_get:
+	pm_runtime_put_noidle(fsl_lpspi->dev);
 out_controller_put:
 	spi_controller_put(controller);
 

drivers/spi/spi-fsl-qspi.c

@@ -876,14 +876,15 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					"QuadSPI-memory");
-	q->ahb_addr = devm_ioremap_resource(dev, res);
-	if (IS_ERR(q->ahb_addr)) {
-		ret = PTR_ERR(q->ahb_addr);
+	q->memmap_phy = res->start;
+	/* Since there are 4 cs, map size required is 4 times ahb_buf_size */
+	q->ahb_addr = devm_ioremap(dev, q->memmap_phy,
+				   (q->devtype_data->ahb_buf_size * 4));
+	if (!q->ahb_addr) {
+		ret = -ENOMEM;
 		goto err_put_ctrl;
 	}
 
-	q->memmap_phy = res->start;
-
 	/* find the clocks */
 	q->clk_en = devm_clk_get(dev, "qspi_en");
 	if (IS_ERR(q->clk_en)) {

drivers/spi/spi-fsl-spi.c

@@ -588,7 +588,7 @@ static void fsl_spi_grlib_probe(struct device *dev)
 	pdata->cs_control = fsl_spi_grlib_cs_control;
 }
 
-static struct spi_master * fsl_spi_probe(struct device *dev,
+static struct spi_master *fsl_spi_probe(struct device *dev,
 		struct resource *mem, unsigned int irq)
 {
 	struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);

drivers/spi/spi-hisi-sfc-v3xx.c

@@ -17,6 +17,11 @@
 
 #define HISI_SFC_V3XX_VERSION (0x1f8)
 
+#define HISI_SFC_V3XX_INT_STAT (0x120)
+#define HISI_SFC_V3XX_INT_STAT_PP_ERR BIT(2)
+#define HISI_SFC_V3XX_INT_STAT_ADDR_IACCES BIT(5)
+#define HISI_SFC_V3XX_INT_CLR (0x12c)
+#define HISI_SFC_V3XX_INT_CLR_CLEAR (0xff)
 #define HISI_SFC_V3XX_CMD_CFG (0x300)
 #define HISI_SFC_V3XX_CMD_CFG_DUAL_IN_DUAL_OUT (1 << 17)
 #define HISI_SFC_V3XX_CMD_CFG_DUAL_IO (2 << 17)
@@ -163,7 +168,7 @@ static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host,
 					 u8 chip_select)
 {
 	int ret, len = op->data.nbytes;
-	u32 config = 0;
+	u32 int_stat, config = 0;
 
 	if (op->addr.nbytes)
 		config |= HISI_SFC_V3XX_CMD_CFG_ADDR_EN_MSK;
@@ -228,6 +233,25 @@ static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host,
 	if (ret)
 		return ret;
 
+	/*
+	 * The interrupt status register indicates whether an error occurs
+	 * after per operation. Check it, and clear the interrupts for
+	 * next time judgement.
+	 */
+	int_stat = readl(host->regbase + HISI_SFC_V3XX_INT_STAT);
+	writel(HISI_SFC_V3XX_INT_CLR_CLEAR,
+	       host->regbase + HISI_SFC_V3XX_INT_CLR);
+
+	if (int_stat & HISI_SFC_V3XX_INT_STAT_ADDR_IACCES) {
+		dev_err(host->dev, "fail to access protected address\n");
+		return -EIO;
+	}
+
+	if (int_stat & HISI_SFC_V3XX_INT_STAT_PP_ERR) {
+		dev_err(host->dev, "page program operation failed\n");
+		return -EIO;
+	}
+
 	if (op->data.dir == SPI_MEM_DATA_IN)
 		hisi_sfc_v3xx_read_databuf(host, op->data.buf.in, len);
 

drivers/spi/spi-imx.c

@@ -71,6 +71,7 @@ struct spi_imx_devtype_data {
 	void (*reset)(struct spi_imx_data *);
 	void (*setup_wml)(struct spi_imx_data *);
 	void (*disable)(struct spi_imx_data *);
+	void (*disable_dma)(struct spi_imx_data *);
 	bool has_dmamode;
 	bool has_slavemode;
 	unsigned int fifo_size;
@@ -485,6 +486,11 @@ static void mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
 	writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
 }
 
+static void mx51_disable_dma(struct spi_imx_data *spi_imx)
+{
+	writel(0, spi_imx->base + MX51_ECSPI_DMA);
+}
+
 static void mx51_ecspi_disable(struct spi_imx_data *spi_imx)
 {
 	u32 ctrl;
@@ -987,6 +993,7 @@ static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
 	.rx_available = mx51_ecspi_rx_available,
 	.reset = mx51_ecspi_reset,
 	.setup_wml = mx51_setup_wml,
+	.disable_dma = mx51_disable_dma,
 	.fifo_size = 64,
 	.has_dmamode = true,
 	.dynamic_burst = true,
@@ -1001,6 +1008,7 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
 	.prepare_transfer = mx51_ecspi_prepare_transfer,
 	.trigger = mx51_ecspi_trigger,
 	.rx_available = mx51_ecspi_rx_available,
+	.disable_dma = mx51_disable_dma,
 	.reset = mx51_ecspi_reset,
 	.fifo_size = 64,
 	.has_dmamode = true,
@@ -1385,6 +1393,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc_tx) {
 		dmaengine_terminate_all(master->dma_tx);
+		dmaengine_terminate_all(master->dma_rx);
 		return -EINVAL;
 	}
 
@@ -1498,6 +1507,7 @@ static int spi_imx_transfer(struct spi_device *spi,
 				struct spi_transfer *transfer)
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+	int ret;
 
 	/* flush rxfifo before transfer */
 	while (spi_imx->devtype_data->rx_available(spi_imx))
@@ -1506,10 +1516,23 @@ static int spi_imx_transfer(struct spi_device *spi,
 	if (spi_imx->slave_mode)
 		return spi_imx_pio_transfer_slave(spi, transfer);
 
-	if (spi_imx->usedma)
-		return spi_imx_dma_transfer(spi_imx, transfer);
-	else
-		return spi_imx_pio_transfer(spi, transfer);
+	/*
+	 * fallback PIO mode if dma setup error happen, for example sdma
+	 * firmware may not be updated as ERR009165 required.
+	 */
+	if (spi_imx->usedma) {
+		ret = spi_imx_dma_transfer(spi_imx, transfer);
+		if (ret != -EINVAL)
+			return ret;
+
+		spi_imx->devtype_data->disable_dma(spi_imx);
+
+		spi_imx->usedma = false;
+		spi_imx->dynamic_burst = spi_imx->devtype_data->dynamic_burst;
+		dev_dbg(&spi->dev, "Fallback to PIO mode\n");
+	}
+
+	return spi_imx_pio_transfer(spi, transfer);
 }
 
 static int spi_imx_setup(struct spi_device *spi)

drivers/spi/spi-mem.c

@@ -108,15 +108,17 @@ static int spi_check_buswidth_req(struct spi_mem *mem, u8 buswidth, bool tx)
 		return 0;
 
 	case 2:
-		if ((tx && (mode & (SPI_TX_DUAL | SPI_TX_QUAD))) ||
-		    (!tx && (mode & (SPI_RX_DUAL | SPI_RX_QUAD))))
+		if ((tx &&
+		     (mode & (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL))) ||
+		    (!tx &&
+		     (mode & (SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL))))
 			return 0;
 
 		break;
 
 	case 4:
-		if ((tx && (mode & SPI_TX_QUAD)) ||
-		    (!tx && (mode & SPI_RX_QUAD)))
+		if ((tx && (mode & (SPI_TX_QUAD | SPI_TX_OCTAL))) ||
+		    (!tx && (mode & (SPI_RX_QUAD | SPI_RX_OCTAL))))
 			return 0;
 
 		break;

drivers/spi/spi-mtk-nor.c

@@ -391,7 +391,7 @@ static int mtk_nor_pp_unbuffered(struct mtk_nor *sp,
 	return mtk_nor_cmd_exec(sp, MTK_NOR_CMD_WRITE, 6 * BITS_PER_BYTE);
 }
 
-int mtk_nor_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
+static int mtk_nor_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 {
 	struct mtk_nor *sp = spi_controller_get_devdata(mem->spi->master);
 	int ret;

drivers/spi/spi-mux.c

@@ -51,6 +51,10 @@ static int spi_mux_select(struct spi_device *spi)
 	struct spi_mux_priv *priv = spi_controller_get_devdata(spi->controller);
 	int ret;
 
+	ret = mux_control_select(priv->mux, spi->chip_select);
+	if (ret)
+		return ret;
+
 	if (priv->current_cs == spi->chip_select)
 		return 0;
 
@@ -62,10 +66,6 @@ static int spi_mux_select(struct spi_device *spi)
 	priv->spi->mode = spi->mode;
 	priv->spi->bits_per_word = spi->bits_per_word;
 
-	ret = mux_control_select(priv->mux, spi->chip_select);
-	if (ret)
-		return ret;
-
 	priv->current_cs = spi->chip_select;
 
 	return 0;

drivers/spi/spi-orion.c

@@ -17,10 +17,8 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/clk.h>
 #include <linux/sizes.h>
-#include <linux/gpio.h>
 #include <asm/unaligned.h>
 
 #define DRIVER_NAME			"orion_spi"
@@ -98,7 +96,6 @@ struct orion_spi {
 	struct clk              *clk;
 	struct clk              *axi_clk;
 	const struct orion_spi_dev *devdata;
-	int			unused_hw_gpio;
 
 	struct orion_child_options	child[ORION_NUM_CHIPSELECTS];
 };
@@ -325,20 +322,27 @@ orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 static void orion_spi_set_cs(struct spi_device *spi, bool enable)
 {
 	struct orion_spi *orion_spi;
-	int cs;
 
 	orion_spi = spi_master_get_devdata(spi->master);
 
-	if (gpio_is_valid(spi->cs_gpio))
-		cs = orion_spi->unused_hw_gpio;
-	else
-		cs = spi->chip_select;
-
+	/*
+	 * If this line is using a GPIO to control chip select, this internal
+	 * .set_cs() function will still be called, so we clear any previous
+	 * chip select. The CS we activate will not have any elecrical effect,
+	 * as it is handled by a GPIO, but that doesn't matter. What we need
+	 * is to deassert the old chip select and assert some other chip select.
+	 */
 	orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, ORION_SPI_CS_MASK);
 	orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG,
-				ORION_SPI_CS(cs));
+			  ORION_SPI_CS(spi->chip_select));
 
-	/* Chip select logic is inverted from spi_set_cs */
+	/*
+	 * Chip select logic is inverted from spi_set_cs(). For lines using a
+	 * GPIO to do chip select SPI_CS_HIGH is enforced and inversion happens
+	 * in the GPIO library, but we don't care about that, because in those
+	 * cases we are dealing with an unused native CS anyways so the polarity
+	 * doesn't matter.
+	 */
 	if (!enable)
 		orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
 	else
@@ -503,9 +507,6 @@ static int orion_spi_transfer_one(struct spi_master *master,
 
 static int orion_spi_setup(struct spi_device *spi)
 {
-	if (gpio_is_valid(spi->cs_gpio)) {
-		gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
-	}
 	return orion_spi_setup_transfer(spi, NULL);
 }
 
@@ -622,13 +623,13 @@ static int orion_spi_probe(struct platform_device *pdev)
 	master->setup = orion_spi_setup;
 	master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
 	master->auto_runtime_pm = true;
+	master->use_gpio_descriptors = true;
 	master->flags = SPI_MASTER_GPIO_SS;
 
 	platform_set_drvdata(pdev, master);
 
 	spi = spi_master_get_devdata(master);
 	spi->master = master;
-	spi->unused_hw_gpio = -1;
 
 	of_id = of_match_device(orion_spi_of_match_table, &pdev->dev);
 	devdata = (of_id) ? of_id->data : &orion_spi_dev_data;
@@ -683,7 +684,6 @@ static int orion_spi_probe(struct platform_device *pdev)
 	for_each_available_child_of_node(pdev->dev.of_node, np) {
 		struct orion_direct_acc *dir_acc;
 		u32 cs;
-		int cs_gpio;
 
 		/* Get chip-select number from the "reg" property */
 		status = of_property_read_u32(np, "reg", &cs);
@@ -694,44 +694,6 @@ static int orion_spi_probe(struct platform_device *pdev)
 			continue;
 		}
 
-		/*
-		 * Initialize the CS GPIO:
-		 * - properly request the actual GPIO signal
-		 * - de-assert the logical signal so that all GPIO CS lines
-		 *   are inactive when probing for slaves
-		 * - find an unused physical CS which will be driven for any
-		 *   slave which uses a CS GPIO
-		 */
-		cs_gpio = of_get_named_gpio(pdev->dev.of_node, "cs-gpios", cs);
-		if (cs_gpio > 0) {
-			char *gpio_name;
-			int cs_flags;
-
-			if (spi->unused_hw_gpio == -1) {
-				dev_info(&pdev->dev,
-					"Selected unused HW CS#%d for any GPIO CSes\n",
-					cs);
-				spi->unused_hw_gpio = cs;
-			}
-
-			gpio_name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
-					"%s-CS%d", dev_name(&pdev->dev), cs);
-			if (!gpio_name) {
-				status = -ENOMEM;
-				goto out_rel_axi_clk;
-			}
-
-			cs_flags = of_property_read_bool(np, "spi-cs-high") ?
-				GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH;
-			status = devm_gpio_request_one(&pdev->dev, cs_gpio,
-					cs_flags, gpio_name);
-			if (status) {
-				dev_err(&pdev->dev,
-					"Can't request GPIO for CS %d\n", cs);
-				goto out_rel_axi_clk;
-			}
-		}
-
 		/*
 		 * Check if an address is configured for this SPI device. If
 		 * not, the MBus mapping via the 'ranges' property in the 'soc'

drivers/spi/spi-pxa2xx.c

@@ -150,6 +150,7 @@ static const struct lpss_config lpss_platforms[] = {
 		.tx_threshold_hi = 48,
 		.cs_sel_shift = 8,
 		.cs_sel_mask = 3 << 8,
+		.cs_clk_stays_gated = true,
 	},
 	{	/* LPSS_CNL_SSP */
 		.offset = 0x200,
@@ -1884,7 +1885,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 
 	/* Register with the SPI framework */
 	platform_set_drvdata(pdev, drv_data);
-	status = devm_spi_register_controller(&pdev->dev, controller);
+	status = spi_register_controller(controller);
 	if (status != 0) {
 		dev_err(&pdev->dev, "problem registering spi controller\n");
 		goto out_error_pm_runtime_enabled;
@@ -1893,7 +1894,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 	return status;
 
 out_error_pm_runtime_enabled:
-	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 out_error_clock_enabled:
@@ -1916,6 +1916,8 @@ static int pxa2xx_spi_remove(struct platform_device *pdev)
 
 	pm_runtime_get_sync(&pdev->dev);
 
+	spi_unregister_controller(drv_data->controller);
+
 	/* Disable the SSP at the peripheral and SOC level */
 	pxa2xx_spi_write(drv_data, SSCR0, 0);
 	clk_disable_unprepare(ssp->clk);

drivers/spi/spi-rb4xx.c

@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
+#include <linux/of.h>
 
 #include <asm/mach-ath79/ar71xx_regs.h>
 
@@ -150,6 +151,7 @@ static int rb4xx_spi_probe(struct platform_device *pdev)
 	if (IS_ERR(ahb_clk))
 		return PTR_ERR(ahb_clk);
 
+	master->dev.of_node = pdev->dev.of_node;
 	master->bus_num = 0;
 	master->num_chipselect = 3;
 	master->mode_bits = SPI_TX_DUAL;
@@ -158,6 +160,11 @@ static int rb4xx_spi_probe(struct platform_device *pdev)
 	master->transfer_one = rb4xx_transfer_one;
 	master->set_cs = rb4xx_set_cs;
 
+	rbspi = spi_master_get_devdata(master);
+	rbspi->base = spi_base;
+	rbspi->clk = ahb_clk;
+	platform_set_drvdata(pdev, rbspi);
+
 	err = devm_spi_register_master(&pdev->dev, master);
 	if (err) {
 		dev_err(&pdev->dev, "failed to register SPI master\n");
@@ -168,11 +175,6 @@ static int rb4xx_spi_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
-	rbspi = spi_master_get_devdata(master);
-	rbspi->base = spi_base;
-	rbspi->clk = ahb_clk;
-	platform_set_drvdata(pdev, rbspi);
-
 	/* Enable SPI */
 	rb4xx_write(rbspi, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
 
@@ -188,11 +190,18 @@ static int rb4xx_spi_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id rb4xx_spi_dt_match[] = {
+	{ .compatible = "mikrotik,rb4xx-spi" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rb4xx_spi_dt_match);
+
 static struct platform_driver rb4xx_spi_drv = {
 	.probe = rb4xx_spi_probe,
 	.remove = rb4xx_spi_remove,
 	.driver = {
 		.name = "rb4xx-spi",
+		.of_match_table = of_match_ptr(rb4xx_spi_dt_match),
 	},
 };
 

drivers/spi/spi-sc18is602.c

@@ -345,6 +345,6 @@ static struct i2c_driver sc18is602_driver = {
 
 module_i2c_driver(sc18is602_driver);
 
-MODULE_DESCRIPTION("SC18IC602/603 SPI Master Driver");
+MODULE_DESCRIPTION("SC18IS602/603 SPI Master Driver");
 MODULE_AUTHOR("Guenter Roeck");
 MODULE_LICENSE("GPL");

drivers/spi/spi-sh-msiof.c

@@ -1398,7 +1398,7 @@ static int sh_msiof_spi_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(sh_msiof_spi_pm_ops, sh_msiof_spi_suspend,
 			 sh_msiof_spi_resume);
-#define DEV_PM_OPS	&sh_msiof_spi_pm_ops
+#define DEV_PM_OPS	(&sh_msiof_spi_pm_ops)
 #else
 #define DEV_PM_OPS	NULL
 #endif /* CONFIG_PM_SLEEP */

drivers/spi/spi-sprd-adi.c

@@ -319,7 +319,7 @@ static int sprd_adi_transfer_one(struct spi_controller *ctlr,
 
 static void sprd_adi_set_wdt_rst_mode(struct sprd_adi *sadi)
 {
-#ifdef CONFIG_SPRD_WATCHDOG
+#if IS_ENABLED(CONFIG_SPRD_WATCHDOG)
 	u32 val;
 
 	/* Set default watchdog reboot mode */

drivers/spi/spi-stm32-qspi.c

@@ -16,6 +16,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/sizes.h>
@@ -87,6 +88,7 @@
 #define STM32_BUSY_TIMEOUT_US 100000
 #define STM32_ABT_TIMEOUT_US 100000
 #define STM32_COMP_TIMEOUT_MS 1000
+#define STM32_AUTOSUSPEND_DELAY -1
 
 struct stm32_qspi_flash {
 	struct stm32_qspi *qspi;
@@ -431,10 +433,17 @@ static int stm32_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 	struct stm32_qspi *qspi = spi_controller_get_devdata(mem->spi->master);
 	int ret;
 
+	ret = pm_runtime_get_sync(qspi->dev);
+	if (ret < 0)
+		return ret;
+
 	mutex_lock(&qspi->lock);
 	ret = stm32_qspi_send(mem, op);
 	mutex_unlock(&qspi->lock);
 
+	pm_runtime_mark_last_busy(qspi->dev);
+	pm_runtime_put_autosuspend(qspi->dev);
+
 	return ret;
 }
 
@@ -444,6 +453,7 @@ static int stm32_qspi_setup(struct spi_device *spi)
 	struct stm32_qspi *qspi = spi_controller_get_devdata(ctrl);
 	struct stm32_qspi_flash *flash;
 	u32 presc;
+	int ret;
 
 	if (ctrl->busy)
 		return -EBUSY;
@@ -451,6 +461,10 @@ static int stm32_qspi_setup(struct spi_device *spi)
 	if (!spi->max_speed_hz)
 		return -EINVAL;
 
+	ret = pm_runtime_get_sync(qspi->dev);
+	if (ret < 0)
+		return ret;
+
 	presc = DIV_ROUND_UP(qspi->clk_rate, spi->max_speed_hz) - 1;
 
 	flash = &qspi->flash[spi->chip_select];
@@ -467,6 +481,9 @@ static int stm32_qspi_setup(struct spi_device *spi)
 	writel_relaxed(qspi->dcr_reg, qspi->io_base + QSPI_DCR);
 	mutex_unlock(&qspi->lock);
 
+	pm_runtime_mark_last_busy(qspi->dev);
+	pm_runtime_put_autosuspend(qspi->dev);
+
 	return 0;
 }
 
@@ -538,10 +555,15 @@ static const struct spi_controller_mem_ops stm32_qspi_mem_ops = {
 
 static void stm32_qspi_release(struct stm32_qspi *qspi)
 {
+	pm_runtime_get_sync(qspi->dev);
 	/* disable qspi */
 	writel_relaxed(0, qspi->io_base + QSPI_CR);
 	stm32_qspi_dma_free(qspi);
 	mutex_destroy(&qspi->lock);
+	pm_runtime_put_noidle(qspi->dev);
+	pm_runtime_disable(qspi->dev);
+	pm_runtime_set_suspended(qspi->dev);
+	pm_runtime_dont_use_autosuspend(qspi->dev);
 	clk_disable_unprepare(qspi->clk);
 }
 
@@ -643,9 +665,20 @@ static int stm32_qspi_probe(struct platform_device *pdev)
 	ctrl->num_chipselect = STM32_QSPI_MAX_NORCHIP;
 	ctrl->dev.of_node = dev->of_node;
 
+	pm_runtime_set_autosuspend_delay(dev, STM32_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_get_noresume(dev);
+
 	ret = devm_spi_register_master(dev, ctrl);
-	if (!ret)
-		return 0;
+	if (ret)
+		goto err_qspi_release;
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
 
 err_qspi_release:
 	stm32_qspi_release(qspi);
@@ -660,14 +693,28 @@ static int stm32_qspi_remove(struct platform_device *pdev)
 	struct stm32_qspi *qspi = platform_get_drvdata(pdev);
 
 	stm32_qspi_release(qspi);
+
 	return 0;
 }
 
-static int __maybe_unused stm32_qspi_suspend(struct device *dev)
+static int __maybe_unused stm32_qspi_runtime_suspend(struct device *dev)
 {
 	struct stm32_qspi *qspi = dev_get_drvdata(dev);
 
 	clk_disable_unprepare(qspi->clk);
+
+	return 0;
+}
+
+static int __maybe_unused stm32_qspi_runtime_resume(struct device *dev)
+{
+	struct stm32_qspi *qspi = dev_get_drvdata(dev);
+
+	return clk_prepare_enable(qspi->clk);
+}
+
+static int __maybe_unused stm32_qspi_suspend(struct device *dev)
+{
 	pinctrl_pm_select_sleep_state(dev);
 
 	return 0;
@@ -683,10 +730,17 @@ static int __maybe_unused stm32_qspi_resume(struct device *dev)
 	writel_relaxed(qspi->cr_reg, qspi->io_base + QSPI_CR);
 	writel_relaxed(qspi->dcr_reg, qspi->io_base + QSPI_DCR);
 
+	pm_runtime_mark_last_busy(qspi->dev);
+	pm_runtime_put_autosuspend(qspi->dev);
+
 	return 0;
 }
 
-static SIMPLE_DEV_PM_OPS(stm32_qspi_pm_ops, stm32_qspi_suspend, stm32_qspi_resume);
+static const struct dev_pm_ops stm32_qspi_pm_ops = {
+	SET_RUNTIME_PM_OPS(stm32_qspi_runtime_suspend,
+			   stm32_qspi_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(stm32_qspi_suspend, stm32_qspi_resume)
+};
 
 static const struct of_device_id stm32_qspi_match[] = {
 	{.compatible = "st,stm32f469-qspi"},

drivers/spi/spi-stm32.c

@@ -811,7 +811,9 @@ static irqreturn_t stm32f4_spi_irq_event(int irq, void *dev_id)
 		mask |= STM32F4_SPI_SR_TXE;
 	}
 
-	if (!spi->cur_usedma && spi->cur_comm == SPI_FULL_DUPLEX) {
+	if (!spi->cur_usedma && (spi->cur_comm == SPI_FULL_DUPLEX ||
+				spi->cur_comm == SPI_SIMPLEX_RX ||
+				spi->cur_comm == SPI_3WIRE_RX)) {
 		/* TXE flag is set and is handled when RXNE flag occurs */
 		sr &= ~STM32F4_SPI_SR_TXE;
 		mask |= STM32F4_SPI_SR_RXNE | STM32F4_SPI_SR_OVR;
@@ -850,7 +852,7 @@ static irqreturn_t stm32f4_spi_irq_event(int irq, void *dev_id)
 		stm32f4_spi_read_rx(spi);
 		if (spi->rx_len == 0)
 			end = true;
-		else /* Load data for discontinuous mode */
+		else if (spi->tx_buf)/* Load data for discontinuous mode */
 			stm32f4_spi_write_tx(spi);
 	}
 
@@ -1151,7 +1153,9 @@ static int stm32f4_spi_transfer_one_irq(struct stm32_spi *spi)
 	/* Enable the interrupts relative to the current communication mode */
 	if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX) {
 		cr2 |= STM32F4_SPI_CR2_TXEIE;
-	} else if (spi->cur_comm == SPI_FULL_DUPLEX) {
+	} else if (spi->cur_comm == SPI_FULL_DUPLEX ||
+				spi->cur_comm == SPI_SIMPLEX_RX ||
+				spi->cur_comm == SPI_3WIRE_RX) {
 		/* In transmit-only mode, the OVR flag is set in the SR register
 		 * since the received data are never read. Therefore set OVR
 		 * interrupt only when rx buffer is available.
@@ -1462,10 +1466,16 @@ static int stm32f4_spi_set_mode(struct stm32_spi *spi, unsigned int comm_type)
 		stm32_spi_set_bits(spi, STM32F4_SPI_CR1,
 					STM32F4_SPI_CR1_BIDIMODE |
 					STM32F4_SPI_CR1_BIDIOE);
-	} else if (comm_type == SPI_FULL_DUPLEX) {
+	} else if (comm_type == SPI_FULL_DUPLEX ||
+				comm_type == SPI_SIMPLEX_RX) {
 		stm32_spi_clr_bits(spi, STM32F4_SPI_CR1,
 					STM32F4_SPI_CR1_BIDIMODE |
 					STM32F4_SPI_CR1_BIDIOE);
+	} else if (comm_type == SPI_3WIRE_RX) {
+		stm32_spi_set_bits(spi, STM32F4_SPI_CR1,
+					STM32F4_SPI_CR1_BIDIMODE);
+		stm32_spi_clr_bits(spi, STM32F4_SPI_CR1,
+					STM32F4_SPI_CR1_BIDIOE);
 	} else {
 		return -EINVAL;
 	}
@@ -1906,6 +1916,7 @@ static int stm32_spi_probe(struct platform_device *pdev)
 	master->prepare_message = stm32_spi_prepare_msg;
 	master->transfer_one = stm32_spi_transfer_one;
 	master->unprepare_message = stm32_spi_unprepare_msg;
+	master->flags = SPI_MASTER_MUST_TX;
 
 	spi->dma_tx = dma_request_chan(spi->dev, "tx");
 	if (IS_ERR(spi->dma_tx)) {

drivers/spi/spi-sun6i.c

@@ -470,6 +470,7 @@ static int sun6i_spi_probe(struct platform_device *pdev)
 
 	master->max_speed_hz = 100 * 1000 * 1000;
 	master->min_speed_hz = 3 * 1000;
+	master->use_gpio_descriptors = true;
 	master->set_cs = sun6i_spi_set_cs;
 	master->transfer_one = sun6i_spi_transfer_one;
 	master->num_chipselect = 4;

drivers/spi/spi-tegra114.c

@@ -1398,6 +1398,7 @@ static int tegra_spi_probe(struct platform_device *pdev)
 	ret = pm_runtime_get_sync(&pdev->dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "pm runtime get failed, e = %d\n", ret);
+		pm_runtime_put_noidle(&pdev->dev);
 		goto exit_pm_disable;
 	}
 

drivers/spi/spi-tegra20-sflash.c

@@ -491,6 +491,7 @@ static int tegra_sflash_probe(struct platform_device *pdev)
 	ret = pm_runtime_get_sync(&pdev->dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "pm runtime get failed, e = %d\n", ret);
+		pm_runtime_put_noidle(&pdev->dev);
 		goto exit_pm_disable;
 	}
 

drivers/spi/spi-tegra20-slink.c

@@ -1118,6 +1118,7 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	ret = pm_runtime_get_sync(&pdev->dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "pm runtime get failed, e = %d\n", ret);
+		pm_runtime_put_noidle(&pdev->dev);
 		goto exit_pm_disable;
 	}
 	tspi->def_command_reg  = SLINK_M_S;

drivers/spi/spi-uniphier.c

@@ -659,8 +659,7 @@ static int uniphier_spi_probe(struct platform_device *pdev)
 	priv->master = master;
 	priv->is_save_param = false;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(priv->base)) {
 		ret = PTR_ERR(priv->base);
 		goto out_master_put;
@@ -716,8 +715,10 @@ static int uniphier_spi_probe(struct platform_device *pdev)
 
 	master->dma_tx = dma_request_chan(&pdev->dev, "tx");
 	if (IS_ERR_OR_NULL(master->dma_tx)) {
-		if (PTR_ERR(master->dma_tx) == -EPROBE_DEFER)
+		if (PTR_ERR(master->dma_tx) == -EPROBE_DEFER) {
+			ret = -EPROBE_DEFER;
 			goto out_disable_clk;
+		}
 		master->dma_tx = NULL;
 		dma_tx_burst = INT_MAX;
 	} else {
@@ -732,8 +733,10 @@ static int uniphier_spi_probe(struct platform_device *pdev)
 
 	master->dma_rx = dma_request_chan(&pdev->dev, "rx");
 	if (IS_ERR_OR_NULL(master->dma_rx)) {
-		if (PTR_ERR(master->dma_rx) == -EPROBE_DEFER)
+		if (PTR_ERR(master->dma_rx) == -EPROBE_DEFER) {
+			ret = -EPROBE_DEFER;
 			goto out_disable_clk;
+		}
 		master->dma_rx = NULL;
 		dma_rx_burst = INT_MAX;
 	} else {

drivers/spi/spi.c

@@ -1023,7 +1023,8 @@ static int spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
 	void *tmp;
 	unsigned int max_tx, max_rx;
 
-	if (ctlr->flags & (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX)) {
+	if ((ctlr->flags & (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX))
+		&& !(msg->spi->mode & SPI_3WIRE)) {
 		max_tx = 0;
 		max_rx = 0;
 
@@ -1075,7 +1076,7 @@ static int spi_transfer_wait(struct spi_controller *ctlr,
 {
 	struct spi_statistics *statm = &ctlr->statistics;
 	struct spi_statistics *stats = &msg->spi->statistics;
-	unsigned long long ms = 1;
+	unsigned long long ms;
 
 	if (spi_controller_is_slave(ctlr)) {
 		if (wait_for_completion_interruptible(&ctlr->xfer_completion)) {
@@ -1160,6 +1161,8 @@ int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer)
 {
 	int delay;
 
+	might_sleep();
+
 	if (!_delay)
 		return -EINVAL;
 
@@ -2111,6 +2114,7 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
 			}
 
 			lookup->max_speed_hz = sb->connection_speed;
+			lookup->bits_per_word = sb->data_bit_length;
 
 			if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
 				lookup->mode |= SPI_CPHA;
@@ -2760,6 +2764,8 @@ void spi_unregister_controller(struct spi_controller *ctlr)
 	struct spi_controller *found;
 	int id = ctlr->bus_num;
 
+	device_for_each_child(&ctlr->dev, NULL, __unregister);
+
 	/* First make sure that this controller was ever added */
 	mutex_lock(&board_lock);
 	found = idr_find(&spi_master_idr, id);
@@ -2772,7 +2778,6 @@ void spi_unregister_controller(struct spi_controller *ctlr)
 	list_del(&ctlr->list);
 	mutex_unlock(&board_lock);
 
-	device_for_each_child(&ctlr->dev, NULL, __unregister);
 	device_unregister(&ctlr->dev);
 	/* free bus id */
 	mutex_lock(&board_lock);
@@ -3853,8 +3858,7 @@ static u8	*buf;
  * is zero for success, else a negative errno status code.
  * This call may only be used from a context that may sleep.
  *
- * Parameters to this routine are always copied using a small buffer;
- * portable code should never use this for more than 32 bytes.
+ * Parameters to this routine are always copied using a small buffer.
  * Performance-sensitive or bulk transfer code should instead use
  * spi_{async,sync}() calls with dma-safe buffers.
  *

drivers/spi/spidev.c

@@ -62,7 +62,8 @@ static DECLARE_BITMAP(minors, N_SPI_MINORS);
 #define SPI_MODE_MASK		(SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \
 				| SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \
 				| SPI_NO_CS | SPI_READY | SPI_TX_DUAL \
-				| SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)
+				| SPI_TX_QUAD | SPI_TX_OCTAL | SPI_RX_DUAL \
+				| SPI_RX_QUAD | SPI_RX_OCTAL)
 
 struct spidev_data {
 	dev_t			devt;

tools/spi/Makefile

@@ -52,7 +52,9 @@ $(OUTPUT)spidev_fdx: $(SPIDEV_FDX_IN)
 clean:
 	rm -f $(ALL_PROGRAMS)
 	rm -rf $(OUTPUT)include/
-	find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete
+	find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete
+	find $(if $(OUTPUT),$(OUTPUT),.) -name '\.*.o.d' -delete
+	find $(if $(OUTPUT),$(OUTPUT),.) -name '\.*.o.cmd' -delete
 
 install: $(ALL_PROGRAMS)
 	install -d -m 755 $(DESTDIR)$(bindir);		\

tools/spi/spidev_test.c

@@ -128,18 +128,22 @@ static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len)
 		.bits_per_word = bits,
 	};
 
-	if (mode & SPI_TX_QUAD)
+	if (mode & SPI_TX_OCTAL)
+		tr.tx_nbits = 8;
+	else if (mode & SPI_TX_QUAD)
 		tr.tx_nbits = 4;
 	else if (mode & SPI_TX_DUAL)
 		tr.tx_nbits = 2;
-	if (mode & SPI_RX_QUAD)
+	if (mode & SPI_RX_OCTAL)
+		tr.rx_nbits = 8;
+	else if (mode & SPI_RX_QUAD)
 		tr.rx_nbits = 4;
 	else if (mode & SPI_RX_DUAL)
 		tr.rx_nbits = 2;
 	if (!(mode & SPI_LOOP)) {
-		if (mode & (SPI_TX_QUAD | SPI_TX_DUAL))
+		if (mode & (SPI_TX_OCTAL | SPI_TX_QUAD | SPI_TX_DUAL))
 			tr.rx_buf = 0;
-		else if (mode & (SPI_RX_QUAD | SPI_RX_DUAL))
+		else if (mode & (SPI_RX_OCTAL | SPI_RX_QUAD | SPI_RX_DUAL))
 			tr.tx_buf = 0;
 	}
 
@@ -187,6 +191,7 @@ static void print_usage(const char *prog)
 	     "  -R --ready    slave pulls low to pause\n"
 	     "  -2 --dual     dual transfer\n"
 	     "  -4 --quad     quad transfer\n"
+	     "  -8 --octal    octal transfer\n"
 	     "  -S --size     transfer size\n"
 	     "  -I --iter     iterations\n");
 	exit(1);
@@ -213,13 +218,14 @@ static void parse_opts(int argc, char *argv[])
 			{ "dual",    0, 0, '2' },
 			{ "verbose", 0, 0, 'v' },
 			{ "quad",    0, 0, '4' },
+			{ "octal",   0, 0, '8' },
 			{ "size",    1, 0, 'S' },
 			{ "iter",    1, 0, 'I' },
 			{ NULL, 0, 0, 0 },
 		};
 		int c;
 
-		c = getopt_long(argc, argv, "D:s:d:b:i:o:lHOLC3NR24p:vS:I:",
+		c = getopt_long(argc, argv, "D:s:d:b:i:o:lHOLC3NR248p:vS:I:",
 				lopts, NULL);
 
 		if (c == -1)
@@ -280,6 +286,9 @@ static void parse_opts(int argc, char *argv[])
 		case '4':
 			mode |= SPI_TX_QUAD;
 			break;
+		case '8':
+			mode |= SPI_TX_OCTAL;
+			break;
 		case 'S':
 			transfer_size = atoi(optarg);
 			break;
@@ -295,6 +304,8 @@ static void parse_opts(int argc, char *argv[])
 			mode |= SPI_RX_DUAL;
 		if (mode & SPI_TX_QUAD)
 			mode |= SPI_RX_QUAD;
+		if (mode & SPI_TX_OCTAL)
+			mode |= SPI_RX_OCTAL;
 	}
 }