Commit a382c30c authored by Stafford Horne's avatar Stafford Horne Committed by Jiri Kosina

HID: quirks: Add no_init_reports for AKAI midi controller

The midi controller times-out while initializing reports, this
causes boot to take an extra 10 seconds. The device descriptor
advertises that it has an internal HID device but seems to not
actually do anything useful.
Signed-off-by: default avatarStafford Horne <shorne@gmail.com>
Reviewed-by: default avatarBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent b786ae8e
...@@ -61,6 +61,9 @@ ...@@ -61,6 +61,9 @@
#define USB_VENDOR_ID_AIREN 0x1a2c #define USB_VENDOR_ID_AIREN 0x1a2c
#define USB_DEVICE_ID_AIREN_SLIMPLUS 0x0002 #define USB_DEVICE_ID_AIREN_SLIMPLUS 0x0002
#define USB_VENDOR_ID_AKAI 0x2011
#define USB_DEVICE_ID_AKAI_MPKMINI2 0x0715
#define USB_VENDOR_ID_ALCOR 0x058f #define USB_VENDOR_ID_ALCOR 0x058f
#define USB_DEVICE_ID_ALCOR_USBRS232 0x9720 #define USB_DEVICE_ID_ALCOR_USBRS232 0x9720
......
...@@ -55,6 +55,7 @@ static const struct hid_blacklist { ...@@ -55,6 +55,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_AIREN, USB_DEVICE_ID_AIREN_SLIMPLUS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_AIREN, USB_DEVICE_ID_AIREN_SLIMPLUS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_AKAI, USB_DEVICE_ID_AKAI_MPKMINI2, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment