Commit a485f5fc authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branches 'regulator/topic/qcom-spmi',...

Merge remote-tracking branches 'regulator/topic/qcom-spmi', 'regulator/topic/rn5t618', 'regulator/topic/tps65218' and 'regulator/topic/twl' into regulator-next
* Ricoh RN5T618 PMIC
* Ricoh RN5T567/RN5T618 PMIC
Ricoh RN5T618 is a power management IC which integrates 3 step-down
DCDC converters, 7 low-dropout regulators, a Li-ion battery charger,
fuel gauge, ADC, GPIOs and a watchdog timer. It can be controlled
through a I2C interface.
Ricoh RN5T567/RN5T618 is a power management IC family which integrates
3 to 4 step-down DCDC converters, 7 low-dropout regulators, GPIOs and
a watchdog timer. The RN5T618 provides additionally a Li-ion battery
charger, fuel gauge and an ADC. It can be controlled through an I2C
interface.
Required properties:
- compatible: should be "ricoh,rn5t618"
- compatible: must be one of
"ricoh,rn5t567"
"ricoh,rn5t618"
- reg: the I2C slave address of the device
Sub-nodes:
- regulators: the node is required if the regulator functionality is
needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, LDO1,
LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4
(RN5T567), LDO1, LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
The common bindings for each individual regulator can be found in:
Documentation/devicetree/bindings/regulator/regulator.txt
......
......@@ -113,9 +113,9 @@ pm8916:
l14, l15, l16, l17, l18
pm8941:
s1, s2, s3, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14,
l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
mvs1, mvs2
s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
5vs1, 5vs2
pm8994:
s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
......
......@@ -80,6 +80,7 @@ &i2c_AO {
pmic@32 {
compatible = "ricoh,rn5t618";
reg = <0x32>;
system-power-controller;
regulators {
};
......
......@@ -852,13 +852,14 @@ config MFD_RK808
including interrupts, RTC, LDO & DCDC regulators, and onkey.
config MFD_RN5T618
tristate "Ricoh RN5T5618 PMIC"
tristate "Ricoh RN5T567/618 PMIC"
depends on I2C
depends on OF
select MFD_CORE
select REGMAP_I2C
help
Say yes here to add support for the Ricoh RN5T618 PMIC. This
driver provides common support for accessing the device,
Say yes here to add support for the Ricoh RN5T567 or R5T618 PMIC.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
......
......@@ -2,6 +2,7 @@
* MFD core driver for Ricoh RN5T618 PMIC
*
* Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
* Copyright (C) 2016 Toradex AG
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -11,10 +12,13 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/mfd/core.h>
#include <linux/mfd/rn5t618.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
static const struct mfd_cell rn5t618_cells[] = {
......@@ -48,28 +52,64 @@ static const struct regmap_config rn5t618_regmap_config = {
};
static struct rn5t618 *rn5t618_pm_power_off;
static struct notifier_block rn5t618_restart_handler;
static void rn5t618_power_off(void)
static void rn5t618_trigger_poweroff_sequence(bool repower)
{
/* disable automatic repower-on */
regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_REPCNT,
RN5T618_REPCNT_REPWRON, 0);
RN5T618_REPCNT_REPWRON,
repower ? RN5T618_REPCNT_REPWRON : 0);
/* start power-off sequence */
regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_SLPCNT,
RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF);
}
static void rn5t618_power_off(void)
{
rn5t618_trigger_poweroff_sequence(false);
}
static int rn5t618_restart(struct notifier_block *this,
unsigned long mode, void *cmd)
{
rn5t618_trigger_poweroff_sequence(true);
/*
* Re-power factor detection on PMIC side is not instant. 1ms
* proved to be enough time until reset takes effect.
*/
mdelay(1);
return NOTIFY_DONE;
}
static const struct of_device_id rn5t618_of_match[] = {
{ .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 },
{ .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 },
{ }
};
MODULE_DEVICE_TABLE(of, rn5t618_of_match);
static int rn5t618_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
const struct of_device_id *of_id;
struct rn5t618 *priv;
int ret;
of_id = of_match_device(rn5t618_of_match, &i2c->dev);
if (!of_id) {
dev_err(&i2c->dev, "Failed to find matching DT ID\n");
return -EINVAL;
}
priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
i2c_set_clientdata(i2c, priv);
priv->variant = (long)of_id->data;
priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
if (IS_ERR(priv->regmap)) {
......@@ -85,9 +125,21 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
return ret;
}
if (!pm_power_off) {
rn5t618_pm_power_off = priv;
pm_power_off = rn5t618_power_off;
rn5t618_pm_power_off = priv;
if (of_device_is_system_power_controller(i2c->dev.of_node)) {
if (!pm_power_off)
pm_power_off = rn5t618_power_off;
else
dev_warn(&i2c->dev, "Poweroff callback already assigned\n");
}
rn5t618_restart_handler.notifier_call = rn5t618_restart;
rn5t618_restart_handler.priority = 192;
ret = register_restart_handler(&rn5t618_restart_handler);
if (ret) {
dev_err(&i2c->dev, "cannot register restart handler, %d\n", ret);
return ret;
}
return 0;
......@@ -105,12 +157,6 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c)
return 0;
}
static const struct of_device_id rn5t618_of_match[] = {
{ .compatible = "ricoh,rn5t618" },
{ }
};
MODULE_DEVICE_TABLE(of, rn5t618_of_match);
static const struct i2c_device_id rn5t618_i2c_id[] = {
{ }
};
......@@ -129,5 +175,5 @@ static struct i2c_driver rn5t618_i2c_driver = {
module_i2c_driver(rn5t618_i2c_driver);
MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
MODULE_DESCRIPTION("Ricoh RN5T618 MFD driver");
MODULE_DESCRIPTION("Ricoh RN5T567/618 MFD driver");
MODULE_LICENSE("GPL v2");
......@@ -645,10 +645,11 @@ config REGULATOR_RK808
outputs which can be controlled by i2c communication.
config REGULATOR_RN5T618
tristate "Ricoh RN5T618 voltage regulators"
tristate "Ricoh RN5T567/618 voltage regulators"
depends on MFD_RN5T618
help
Say y here to support the regulators found on Ricoh RN5T618 PMIC.
Say y here to support the regulators found on Ricoh RN5T567 or
RN5T618 PMIC.
config REGULATOR_RT5033
tristate "Richtek RT5033 Regulators"
......
......@@ -1085,6 +1085,8 @@ static struct regulator_ops spmi_vs_ops = {
.set_pull_down = spmi_regulator_common_set_pull_down,
.set_soft_start = spmi_regulator_common_set_soft_start,
.set_over_current_protection = spmi_regulator_vs_ocp,
.set_mode = spmi_regulator_common_set_mode,
.get_mode = spmi_regulator_common_get_mode,
};
static struct regulator_ops spmi_boost_ops = {
......@@ -1496,6 +1498,7 @@ static const struct spmi_regulator_data pm8941_regulators[] = {
{ "s1", 0x1400, "vdd_s1", },
{ "s2", 0x1700, "vdd_s2", },
{ "s3", 0x1a00, "vdd_s3", },
{ "s4", 0xa000, },
{ "l1", 0x4000, "vdd_l1_l3", },
{ "l2", 0x4100, "vdd_l2_lvs_1_2_3", },
{ "l3", 0x4200, "vdd_l1_l3", },
......@@ -1523,8 +1526,8 @@ static const struct spmi_regulator_data pm8941_regulators[] = {
{ "lvs1", 0x8000, "vdd_l2_lvs_1_2_3", },
{ "lvs2", 0x8100, "vdd_l2_lvs_1_2_3", },
{ "lvs3", 0x8200, "vdd_l2_lvs_1_2_3", },
{ "mvs1", 0x8300, "vin_5vs", },
{ "mvs2", 0x8400, "vin_5vs", },
{ "5vs1", 0x8300, "vin_5vs", "ocp-5vs1", },
{ "5vs2", 0x8400, "vin_5vs", "ocp-5vs2", },
{ }
};
......
......@@ -46,6 +46,23 @@ static struct regulator_ops rn5t618_reg_ops = {
.vsel_mask = (vmask), \
}
static struct regulator_desc rn5t567_regulators[] = {
/* DCDC */
REG(DCDC1, DC1CTL, BIT(0), DC1DAC, 0xff, 600000, 3500000, 12500),
REG(DCDC2, DC2CTL, BIT(0), DC2DAC, 0xff, 600000, 3500000, 12500),
REG(DCDC3, DC3CTL, BIT(0), DC3DAC, 0xff, 600000, 3500000, 12500),
REG(DCDC4, DC4CTL, BIT(0), DC4DAC, 0xff, 600000, 3500000, 12500),
/* LDO */
REG(LDO1, LDOEN1, BIT(0), LDO1DAC, 0x7f, 900000, 3500000, 25000),
REG(LDO2, LDOEN1, BIT(1), LDO2DAC, 0x7f, 900000, 3500000, 25000),
REG(LDO3, LDOEN1, BIT(2), LDO3DAC, 0x7f, 600000, 3500000, 25000),
REG(LDO4, LDOEN1, BIT(3), LDO4DAC, 0x7f, 900000, 3500000, 25000),
REG(LDO5, LDOEN1, BIT(4), LDO5DAC, 0x7f, 900000, 3500000, 25000),
/* LDO RTC */
REG(LDORTC1, LDOEN2, BIT(4), LDORTCDAC, 0x7f, 1200000, 3500000, 25000),
REG(LDORTC2, LDOEN2, BIT(5), LDORTC2DAC, 0x7f, 900000, 3500000, 25000),
};
static struct regulator_desc rn5t618_regulators[] = {
/* DCDC */
REG(DCDC1, DC1CTL, BIT(0), DC1DAC, 0xff, 600000, 3500000, 12500),
......@@ -67,18 +84,33 @@ static int rn5t618_regulator_probe(struct platform_device *pdev)
struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = { };
struct regulator_dev *rdev;
struct regulator_desc *regulators;
int i;
switch (rn5t618->variant) {
case RN5T567:
regulators = rn5t567_regulators;
break;
case RN5T618:
regulators = rn5t618_regulators;
break;
default:
return -EINVAL;
}
config.dev = pdev->dev.parent;
config.regmap = rn5t618->regmap;
for (i = 0; i < RN5T618_REG_NUM; i++) {
config.dev = pdev->dev.parent;
config.regmap = rn5t618->regmap;
if (!regulators[i].name)
continue;
rdev = devm_regulator_register(&pdev->dev,
&rn5t618_regulators[i],
&regulators[i],
&config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register %s regulator\n",
rn5t618_regulators[i].name);
regulators[i].name);
return PTR_ERR(rdev);
}
}
......
......@@ -28,7 +28,7 @@
#include <linux/mfd/tps65217.h>
#define TPS65217_REGULATOR(_name, _id, _of_match, _ops, _n, _vr, _vm, _em, \
_t, _lr, _nlr) \
_t, _lr, _nlr, _sr, _sm) \
{ \
.name = _name, \
.id = _id, \
......@@ -45,6 +45,8 @@
.volt_table = _t, \
.linear_ranges = _lr, \
.n_linear_ranges = _nlr, \
.bypass_reg = _sr, \
.bypass_mask = _sm, \
} \
static const unsigned int LDO1_VSEL_table[] = {
......@@ -118,6 +120,35 @@ static int tps65217_pmic_set_voltage_sel(struct regulator_dev *dev,
return ret;
}
static int tps65217_pmic_set_suspend_enable(struct regulator_dev *dev)
{
struct tps65217 *tps = rdev_get_drvdata(dev);
unsigned int rid = rdev_get_id(dev);
if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4)
return -EINVAL;
return tps65217_clear_bits(tps, dev->desc->bypass_reg,
dev->desc->bypass_mask,
TPS65217_PROTECT_L1);
}
static int tps65217_pmic_set_suspend_disable(struct regulator_dev *dev)
{
struct tps65217 *tps = rdev_get_drvdata(dev);
unsigned int rid = rdev_get_id(dev);
if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4)
return -EINVAL;
if (!tps->strobes[rid])
return -EINVAL;
return tps65217_set_bits(tps, dev->desc->bypass_reg,
dev->desc->bypass_mask,
tps->strobes[rid], TPS65217_PROTECT_L1);
}
/* Operations permitted on DCDCx, LDO2, LDO3 and LDO4 */
static struct regulator_ops tps65217_pmic_ops = {
.is_enabled = regulator_is_enabled_regmap,
......@@ -127,6 +158,8 @@ static struct regulator_ops tps65217_pmic_ops = {
.set_voltage_sel = tps65217_pmic_set_voltage_sel,
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_suspend_enable = tps65217_pmic_set_suspend_enable,
.set_suspend_disable = tps65217_pmic_set_suspend_disable,
};
/* Operations permitted on LDO1 */
......@@ -138,41 +171,50 @@ static struct regulator_ops tps65217_pmic_ldo1_ops = {
.set_voltage_sel = tps65217_pmic_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.set_suspend_enable = tps65217_pmic_set_suspend_enable,
.set_suspend_disable = tps65217_pmic_set_suspend_disable,
};
static const struct regulator_desc regulators[] = {
TPS65217_REGULATOR("DCDC1", TPS65217_DCDC_1, "dcdc1",
tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC1,
TPS65217_DEFDCDCX_DCDC_MASK, TPS65217_ENABLE_DC1_EN,
NULL, tps65217_uv1_ranges, 2),
NULL, tps65217_uv1_ranges, 2, TPS65217_REG_SEQ1,
TPS65217_SEQ1_DC1_SEQ_MASK),
TPS65217_REGULATOR("DCDC2", TPS65217_DCDC_2, "dcdc2",
tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC2,
TPS65217_DEFDCDCX_DCDC_MASK, TPS65217_ENABLE_DC2_EN,
NULL, tps65217_uv1_ranges,
ARRAY_SIZE(tps65217_uv1_ranges)),
ARRAY_SIZE(tps65217_uv1_ranges), TPS65217_REG_SEQ1,
TPS65217_SEQ1_DC2_SEQ_MASK),
TPS65217_REGULATOR("DCDC3", TPS65217_DCDC_3, "dcdc3",
tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC3,
TPS65217_DEFDCDCX_DCDC_MASK, TPS65217_ENABLE_DC3_EN,
NULL, tps65217_uv1_ranges, 1),
NULL, tps65217_uv1_ranges, 1, TPS65217_REG_SEQ2,
TPS65217_SEQ2_DC3_SEQ_MASK),
TPS65217_REGULATOR("LDO1", TPS65217_LDO_1, "ldo1",
tps65217_pmic_ldo1_ops, 16, TPS65217_REG_DEFLDO1,
TPS65217_DEFLDO1_LDO1_MASK, TPS65217_ENABLE_LDO1_EN,
LDO1_VSEL_table, NULL, 0),
LDO1_VSEL_table, NULL, 0, TPS65217_REG_SEQ2,
TPS65217_SEQ2_LDO1_SEQ_MASK),
TPS65217_REGULATOR("LDO2", TPS65217_LDO_2, "ldo2", tps65217_pmic_ops,
64, TPS65217_REG_DEFLDO2,
TPS65217_DEFLDO2_LDO2_MASK, TPS65217_ENABLE_LDO2_EN,
NULL, tps65217_uv1_ranges,
ARRAY_SIZE(tps65217_uv1_ranges)),
ARRAY_SIZE(tps65217_uv1_ranges), TPS65217_REG_SEQ3,
TPS65217_SEQ3_LDO2_SEQ_MASK),
TPS65217_REGULATOR("LDO3", TPS65217_LDO_3, "ldo3", tps65217_pmic_ops,
32, TPS65217_REG_DEFLS1, TPS65217_DEFLDO3_LDO3_MASK,
TPS65217_ENABLE_LS1_EN | TPS65217_DEFLDO3_LDO3_EN,
NULL, tps65217_uv2_ranges,
ARRAY_SIZE(tps65217_uv2_ranges)),
ARRAY_SIZE(tps65217_uv2_ranges), TPS65217_REG_SEQ3,
TPS65217_SEQ3_LDO3_SEQ_MASK),
TPS65217_REGULATOR("LDO4", TPS65217_LDO_4, "ldo4", tps65217_pmic_ops,
32, TPS65217_REG_DEFLS2, TPS65217_DEFLDO4_LDO4_MASK,
TPS65217_ENABLE_LS2_EN | TPS65217_DEFLDO4_LDO4_EN,
NULL, tps65217_uv2_ranges,
ARRAY_SIZE(tps65217_uv2_ranges)),
ARRAY_SIZE(tps65217_uv2_ranges), TPS65217_REG_SEQ4,
TPS65217_SEQ4_LDO4_SEQ_MASK),
};
static int tps65217_regulator_probe(struct platform_device *pdev)
......@@ -181,13 +223,18 @@ static int tps65217_regulator_probe(struct platform_device *pdev)
struct tps65217_board *pdata = dev_get_platdata(tps->dev);
struct regulator_dev *rdev;
struct regulator_config config = { };
int i;
int i, ret;
unsigned int val;
if (tps65217_chip_id(tps) != TPS65217) {
dev_err(&pdev->dev, "Invalid tps chip version\n");
return -ENODEV;
}
/* Allocate memory for strobes */
tps->strobes = devm_kzalloc(&pdev->dev, sizeof(u8) *
TPS65217_NUM_REGULATOR, GFP_KERNEL);
platform_set_drvdata(pdev, tps);
for (i = 0; i < TPS65217_NUM_REGULATOR; i++) {
......@@ -205,6 +252,10 @@ static int tps65217_regulator_probe(struct platform_device *pdev)
pdev->name);
return PTR_ERR(rdev);
}
/* Store default strobe info */
ret = tps65217_reg_read(tps, regulators[i].bypass_reg, &val);
tps->strobes[i] = val & regulators[i].bypass_mask;
}
return 0;
......
......@@ -31,7 +31,7 @@ enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4,
DCDC5, DCDC6, LDO1, LS3 };
#define TPS65218_REGULATOR(_name, _id, _type, _ops, _n, _vr, _vm, _er, _em, \
_cr, _cm, _lr, _nlr, _delay, _fuv) \
_cr, _cm, _lr, _nlr, _delay, _fuv, _sr, _sm) \
{ \
.name = _name, \
.id = _id, \
......@@ -49,7 +49,9 @@ enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4,
.linear_ranges = _lr, \
.n_linear_ranges = _nlr, \
.ramp_delay = _delay, \
.fixed_uV = _fuv \
.fixed_uV = _fuv, \
.bypass_reg = _sr, \
.bypass_mask = _sm, \
} \
#define TPS65218_INFO(_id, _nm, _min, _max) \
......@@ -157,6 +159,40 @@ static int tps65218_pmic_disable(struct regulator_dev *dev)
dev->desc->enable_mask, TPS65218_PROTECT_L1);
}
static int tps65218_pmic_set_suspend_enable(struct regulator_dev *dev)
{
struct tps65218 *tps = rdev_get_drvdata(dev);
unsigned int rid = rdev_get_id(dev);
if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1)
return -EINVAL;
return tps65218_clear_bits(tps, dev->desc->bypass_reg,
dev->desc->bypass_mask,
TPS65218_PROTECT_L1);
}
static int tps65218_pmic_set_suspend_disable(struct regulator_dev *dev)
{
struct tps65218 *tps = rdev_get_drvdata(dev);
unsigned int rid = rdev_get_id(dev);
if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1)
return -EINVAL;
if (!tps->info[rid]->strobe) {
if (rid == TPS65218_DCDC_3)
tps->info[rid]->strobe = 3;
else
return -EINVAL;
}
return tps65218_set_bits(tps, dev->desc->bypass_reg,
dev->desc->bypass_mask,
tps->info[rid]->strobe,
TPS65218_PROTECT_L1);
}
/* Operations permitted on DCDC1, DCDC2 */
static struct regulator_ops tps65218_dcdc12_ops = {
.is_enabled = regulator_is_enabled_regmap,
......@@ -167,6 +203,8 @@ static struct regulator_ops tps65218_dcdc12_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_suspend_enable = tps65218_pmic_set_suspend_enable,
.set_suspend_disable = tps65218_pmic_set_suspend_disable,
};
/* Operations permitted on DCDC3, DCDC4 and LDO1 */
......@@ -178,6 +216,8 @@ static struct regulator_ops tps65218_ldo1_dcdc34_ops = {
.set_voltage_sel = tps65218_pmic_set_voltage_sel,
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_suspend_enable = tps65218_pmic_set_suspend_enable,
.set_suspend_disable = tps65218_pmic_set_suspend_disable,
};
static const int ls3_currents[] = { 100, 200, 500, 1000 };
......@@ -247,6 +287,8 @@ static struct regulator_ops tps65218_dcdc56_pmic_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = tps65218_pmic_enable,
.disable = tps65218_pmic_disable,
.set_suspend_enable = tps65218_pmic_set_suspend_enable,
.set_suspend_disable = tps65218_pmic_set_suspend_disable,
};
static const struct regulator_desc regulators[] = {
......@@ -254,42 +296,47 @@ static const struct regulator_desc regulators[] = {
tps65218_dcdc12_ops, 64, TPS65218_REG_CONTROL_DCDC1,
TPS65218_CONTROL_DCDC1_MASK, TPS65218_REG_ENABLE1,
TPS65218_ENABLE1_DC1_EN, 0, 0, dcdc1_dcdc2_ranges,
2, 4000, 0),
2, 4000, 0, TPS65218_REG_SEQ3,
TPS65218_SEQ3_DC1_SEQ_MASK),
TPS65218_REGULATOR("DCDC2", TPS65218_DCDC_2, REGULATOR_VOLTAGE,
tps65218_dcdc12_ops, 64, TPS65218_REG_CONTROL_DCDC2,
TPS65218_CONTROL_DCDC2_MASK, TPS65218_REG_ENABLE1,
TPS65218_ENABLE1_DC2_EN, 0, 0, dcdc1_dcdc2_ranges,
2, 4000, 0),
2, 4000, 0, TPS65218_REG_SEQ3,
TPS65218_SEQ3_DC2_SEQ_MASK),
TPS65218_REGULATOR("DCDC3", TPS65218_DCDC_3, REGULATOR_VOLTAGE,
tps65218_ldo1_dcdc34_ops, 64,
TPS65218_REG_CONTROL_DCDC3,
TPS65218_CONTROL_DCDC3_MASK, TPS65218_REG_ENABLE1,
TPS65218_ENABLE1_DC3_EN, 0, 0, ldo1_dcdc3_ranges, 2,
0, 0),
0, 0, TPS65218_REG_SEQ4, TPS65218_SEQ4_DC3_SEQ_MASK),
TPS65218_REGULATOR("DCDC4", TPS65218_DCDC_4, REGULATOR_VOLTAGE,
tps65218_ldo1_dcdc34_ops, 53,
TPS65218_REG_CONTROL_DCDC4,
TPS65218_CONTROL_DCDC4_MASK, TPS65218_REG_ENABLE1,
TPS65218_ENABLE1_DC4_EN, 0, 0, dcdc4_ranges, 2,
0, 0),
0, 0, TPS65218_REG_SEQ4, TPS65218_SEQ4_DC4_SEQ_MASK),
TPS65218_REGULATOR("DCDC5", TPS65218_DCDC_5, REGULATOR_VOLTAGE,
tps65218_dcdc56_pmic_ops, 1, -1, -1,
TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC5_EN, 0, 0,
NULL, 0, 0, 1000000),
NULL, 0, 0, 1000000, TPS65218_REG_SEQ5,
TPS65218_SEQ5_DC5_SEQ_MASK),
TPS65218_REGULATOR("DCDC6", TPS65218_DCDC_6, REGULATOR_VOLTAGE,
tps65218_dcdc56_pmic_ops, 1, -1, -1,
TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC6_EN, 0, 0,
NULL, 0, 0, 1800000),
NULL, 0, 0, 1800000, TPS65218_REG_SEQ5,
TPS65218_SEQ5_DC6_SEQ_MASK),
TPS65218_REGULATOR("LDO1", TPS65218_LDO_1, REGULATOR_VOLTAGE,
tps65218_ldo1_dcdc34_ops, 64,
TPS65218_REG_CONTROL_LDO1,
TPS65218_CONTROL_LDO1_MASK, TPS65218_REG_ENABLE2,
TPS65218_ENABLE2_LDO1_EN, 0, 0, ldo1_dcdc3_ranges,
2, 0, 0),
2, 0, 0, TPS65218_REG_SEQ6,
TPS65218_SEQ6_LDO1_SEQ_MASK),
TPS65218_REGULATOR("LS3", TPS65218_LS_3, REGULATOR_CURRENT,
tps65218_ls3_ops, 0, 0, 0, TPS65218_REG_ENABLE2,
TPS65218_ENABLE2_LS3_EN, TPS65218_REG_CONFIG2,
TPS65218_CONFIG2_LS3ILIM_MASK, NULL, 0, 0, 0),
TPS65218_CONFIG2_LS3ILIM_MASK, NULL, 0, 0, 0, 0, 0),
};
static int tps65218_regulator_probe(struct platform_device *pdev)
......@@ -300,7 +347,8 @@ static int tps65218_regulator_probe(struct platform_device *pdev)
struct regulator_dev *rdev;
const struct of_device_id *match;
struct regulator_config config = { };
int id;
int id, ret;
unsigned int val;
match = of_match_device(tps65218_of_match, &pdev->dev);
if (!match)
......@@ -327,6 +375,12 @@ static int tps65218_regulator_probe(struct platform_device *pdev)
return PTR_ERR(rdev);
}
ret = tps65218_reg_read(tps, regulators[id].bypass_reg, &val);
if (ret)
return ret;
tps->info[id]->strobe = val & regulators[id].bypass_mask;
return 0;
}
......
......@@ -905,7 +905,7 @@ static struct regulator_ops twlsmps_ops = {
twl4030reg_map_mode)
#define TWL6030_FIXED_LDO(label, offset, mVolts, turnon_delay) \
TWL_FIXED_LDO(label, offset, mVolts, 0x0, turnon_delay, \
0x0, TWL6030, twl6030fixed_ops, 0x0)
0x0, TWL6030, twl6030fixed_ops, NULL)
#define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \
static const struct twlreg_info TWL4030_INFO_##label = { \
......
......@@ -20,6 +20,7 @@
#define RN5T618_OTPVER 0x01
#define RN5T618_IODAC 0x02
#define RN5T618_VINDAC 0x03
#define RN5T618_OUT32KEN 0x05
#define RN5T618_CPUCNT 0x06
#define RN5T618_PSWR 0x07
#define RN5T618_PONHIS 0x09
......@@ -38,6 +39,7 @@
#define RN5T618_DC1_SLOT 0x16
#define RN5T618_DC2_SLOT 0x17
#define RN5T618_DC3_SLOT 0x18
#define RN5T618_DC4_SLOT 0x19
#define RN5T618_LDO1_SLOT 0x1b
#define RN5T618_LDO2_SLOT 0x1c
#define RN5T618_LDO3_SLOT 0x1d
......@@ -54,12 +56,16 @@
#define RN5T618_DC2CTL2 0x2f
#define RN5T618_DC3CTL 0x30
#define RN5T618_DC3CTL2 0x31
#define RN5T618_DC4CTL 0x32
#define RN5T618_DC4CTL2 0x33
#define RN5T618_DC1DAC 0x36
#define RN5T618_DC2DAC 0x37
#define RN5T618_DC3DAC 0x38
#define RN5T618_DC4DAC 0x39
#define RN5T618_DC1DAC_SLP 0x3b
#define RN5T618_DC2DAC_SLP 0x3c
#define RN5T618_DC3DAC_SLP 0x3d
#define RN5T618_DC4DAC_SLP 0x3e
#define RN5T618_DCIREN 0x40
#define RN5T618_DCIRQ 0x41
#define RN5T618_DCIRMON 0x42
......@@ -211,6 +217,7 @@ enum {
RN5T618_DCDC1,
RN5T618_DCDC2,
RN5T618_DCDC3,
RN5T618_DCDC4,
RN5T618_LDO1,
RN5T618_LDO2,
RN5T618_LDO3,
......@@ -221,8 +228,14 @@ enum {
RN5T618_REG_NUM,
};
enum {
RN5T567 = 0,
RN5T618,
};
struct rn5t618 {
struct regmap *regmap;
long variant;
};
#endif /* __LINUX_MFD_RN5T618_H */
......@@ -257,6 +257,7 @@ struct tps65217 {
unsigned long id;
struct regulator_desc desc[TPS65217_NUM_REGULATOR];
struct regmap *regmap;
u8 *strobes;
};
static inline struct tps65217 *dev_to_tps65217(struct device *dev)
......
......@@ -246,6 +246,7 @@ enum tps65218_irqs {
* @name: Voltage regulator name
* @min_uV: minimum micro volts
* @max_uV: minimum micro volts
* @strobe: sequencing strobe value for the regulator
*
* This data is used to check the regualtor voltage limits while setting.
*/
......@@ -254,6 +255,7 @@ struct tps_info {
const char *name;
int min_uV;
int max_uV;
int strobe;
};
/**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment