Commit a5038d56 authored by Glen Lee's avatar Glen Lee Committed by Greg Kroah-Hartman

staging: wilc1000: remove wilc memory allocation config

This patch remove memory allocation options in Kconfig. It was used a long time
ago to aquire memory, which we will not use this config anymore.
Remove it's config, related define and codes as well. We will take
PREALLOCATE_AT_LOADING_DRIVER as it is default.
Signed-off-by: default avatarGlen Lee <glen.lee@atmel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent c6e3a5b3
......@@ -31,28 +31,6 @@ config WILC1000_SPI
immediately following reset when pin 9 (SDIO_SPI_CFG) is tied to
VDDIO. Select this if your platform is using the SPI bus.
choice
prompt "WILC1000 Memory Allocation"
depends on WILC1000
default WILC1000_PREALLOCATE_AT_LOADING_DRIVER
config WILC1000_PREALLOCATE_AT_LOADING_DRIVER
bool "Preallocate memory at loading driver"
---help---
This choice supports static allocation of the memory
for the receive buffer. The driver will allocate the RX buffer
during initial time. The driver will also free the buffer
by calling network device stop.
config WILC1000_DYNAMICALLY_ALLOCATE_MEMROY
bool "Dynamically allocate memory in real time"
---help---
This choice supports dynamic allocation of the memory
for the receive buffer. The driver will allocate the RX buffer
when it is required.
endchoice
config WILC1000_HW_OOB_INTR
bool "WILC1000 out of band interrupt"
depends on WILC1000_SDIO
......
......@@ -7,12 +7,6 @@ ccflags-y += -DSTA_FIRMWARE=\"atmel/wilc1000_fw.bin\" \
ccflags-y += -I$(src)/ -D__CHECK_ENDIAN__ -DWILC_ASIC_A0 -DWILC_DEBUGFS
#ccflags-y += -DTCP_ACK_FILTER
ccflags-$(CONFIG_WILC1000_PREALLOCATE_AT_LOADING_DRIVER) += -DMEMORY_STATIC \
-DWILC_PREALLOC_AT_INSMOD
ccflags-$(CONFIG_WILC1000_DYNAMICALLY_ALLOCATE_MEMROY) += -DWILC_NORMAL_ALLOC
wilc1000-objs := wilc_wfi_cfgoperations.o linux_wlan.o linux_mon.o \
wilc_msgqueue.o \
coreconfigurator.o host_interface.o \
......
......@@ -124,9 +124,7 @@ extern atomic_t WILC_DEBUG_LEVEL;
#define FN_IN /* PRINT_D(">>> \n") */
#define FN_OUT /* PRINT_D("<<<\n") */
#ifdef MEMORY_STATIC
#define LINUX_RX_SIZE (96 * 1024)
#endif
#define LINUX_TX_SIZE (64 * 1024)
......
......@@ -12,10 +12,8 @@ typedef struct {
u32 cfg_frame_offset;
int cfg_seq_no;
#ifdef MEMORY_STATIC
u8 *rx_buffer;
u32 rx_buffer_offset;
#endif
u8 *tx_buffer;
u32 tx_buffer_offset;
......@@ -1050,9 +1048,6 @@ static void wilc_wlan_handle_rxq(struct wilc *wilc)
if (offset >= size)
break;
} while (1);
#ifndef MEMORY_STATIC
kfree(buffer);
#endif
kfree(rqe);
if (has_packet)
......@@ -1097,9 +1092,7 @@ static void wilc_sleeptimer_isr_ext(struct wilc *wilc, u32 int_stats1)
static void wilc_wlan_handle_isr_ext(struct wilc *wilc, u32 int_status)
{
wilc_wlan_dev_t *p = &g_wlan;
#ifdef MEMORY_STATIC
u32 offset = p->rx_buffer_offset;
#endif
u8 *buffer = NULL;
u32 size;
u32 retries = 0;
......@@ -1118,7 +1111,6 @@ static void wilc_wlan_handle_isr_ext(struct wilc *wilc, u32 int_status)
}
if (size > 0) {
#ifdef MEMORY_STATIC
if (LINUX_RX_SIZE - offset < size)
offset = 0;
......@@ -1129,13 +1121,6 @@ static void wilc_wlan_handle_isr_ext(struct wilc *wilc, u32 int_status)
goto _end_;
}
#else
buffer = kmalloc(size, GFP_KERNEL);
if (!buffer) {
usleep_range(100 * 1000, 100 * 1000);
goto _end_;
}
#endif
p->hif_func.hif_clear_int_ext(wilc,
DATA_INT_CLR | ENABLE_RX_VMM);
ret = p->hif_func.hif_block_rx_ext(wilc, 0, buffer, size);
......@@ -1146,10 +1131,8 @@ static void wilc_wlan_handle_isr_ext(struct wilc *wilc, u32 int_status)
}
_end_:
if (ret) {
#ifdef MEMORY_STATIC
offset += size;
p->rx_buffer_offset = offset;
#endif
rqe = kmalloc(sizeof(*rqe), GFP_KERNEL);
if (rqe) {
rqe->buffer = buffer;
......@@ -1157,10 +1140,6 @@ static void wilc_wlan_handle_isr_ext(struct wilc *wilc, u32 int_status)
PRINT_D(RX_DBG, "rxq entery Size= %d - Address = %p\n", rqe->buffer_size, rqe->buffer);
wilc_wlan_rxq_add(wilc, rqe);
}
} else {
#ifndef MEMORY_STATIC
kfree(buffer);
#endif
}
}
wilc_wlan_handle_rxq(wilc);
......@@ -1442,16 +1421,11 @@ void wilc_wlan_cleanup(struct net_device *dev)
rqe = wilc_wlan_rxq_remove(wilc);
if (!rqe)
break;
#ifndef MEMORY_STATIC
kfree(rqe->buffer);
#endif
kfree(rqe);
} while (1);
#ifdef MEMORY_STATIC
kfree(p->rx_buffer);
p->rx_buffer = NULL;
#endif
kfree(p->tx_buffer);
acquire_bus(wilc, ACQUIRE_AND_WAKEUP);
......@@ -1691,7 +1665,6 @@ int wilc_wlan_init(struct net_device *dev)
goto _fail_;
}
#if defined(MEMORY_STATIC)
if (!g_wlan.rx_buffer)
g_wlan.rx_buffer = kmalloc(LINUX_RX_SIZE, GFP_KERNEL);
PRINT_D(TX_DBG, "g_wlan.rx_buffer =%p\n", g_wlan.rx_buffer);
......@@ -1700,7 +1673,6 @@ int wilc_wlan_init(struct net_device *dev)
PRINT_ER("Can't allocate Rx Buffer");
goto _fail_;
}
#endif
if (!init_chip(dev)) {
ret = -EIO;
......@@ -1714,10 +1686,8 @@ int wilc_wlan_init(struct net_device *dev)
_fail_:
#ifdef MEMORY_STATIC
kfree(g_wlan.rx_buffer);
g_wlan.rx_buffer = NULL;
#endif
kfree(g_wlan.tx_buffer);
g_wlan.tx_buffer = NULL;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment