Skip to content

L
linux
Commit a52b0d25 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (46 commits)
  ide: constify struct ide_dma_ops
  ide: add struct ide_dma_ops (take 3)
  ide: add IDE_HFLAG_SERIALIZE_DMA host flag
  sl82c105: check bridge revision in sl82c105_init_one()
  au1xxx-ide: use ->init_dma method
  palm_bk3710: use ->init_dma method
  sgiioc4: use ->init_dma method
  icside: use ->init_dma method
  ide-pmac: use ->init_dma method
  ide: do complete DMA setup in ->init_dma method (take 2)
  au1xxx-ide: fix MWDMA support
  ide: cleanup ide_setup_dma()
  ide: factor out setting PCI bus-mastering from ide_hwif_setup_dma()
  ide: export ide_allocate_dma_engine()
  ide: move ide_setup_dma() call out from ->init_dma method
  alim15x3: skip DMA initialization completely on revs < 0x20
  pdc202xx_old: remove init_dma_pdc202xx()
  ide: don't display "BIOS" settings in ide_setup_dma()
  ide: remove ->cds field from ide_hwif_t (take 2)
  ide: remove ide_dma_iobase()
  ...
parents 539a5fe2 f37afdac
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1777 additions and 1875 deletions
Documentation/mips/AU1xxx_IDE.README
View file @ a52b0d25
......@@ -46,8 +46,6 @@ Two files are introduced:
a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
containes : struct _auide_hwif
struct drive_list_entry dma_white_list
struct drive_list_entry dma_black_list
timing parameters for PIO mode 0/1/2/3/4
timing parameters for MWDMA 0/1/2
......@@ -63,12 +61,6 @@ Four configs variables are introduced:
CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
per descriptor
If MWDMA is enabled and the connected hard disc is not on the white list, the
kernel switches to a "safe mwdma mode" at boot time. In this mode the IDE
performance is substantial slower then in full speed mwdma. In this case
please add your hard disc to the white list (follow instruction from 'ADD NEW
HARD DISC TO WHITE OR BLACK LIST' section).
SUPPORTED IDE MODES
-------------------
......@@ -120,44 +112,6 @@ CONFIG_IDEDMA_AUTO=y
Also undefine 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to
disable the burst support on DBDMA controller.
ADD NEW HARD DISC TO WHITE OR BLACK LIST
----------------------------------------
Step 1 : detect the model name of your hard disc
a) connect your hard disc to the AU1XXX
b) boot your kernel and get the hard disc model.
Example boot log:
--snipped--
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Au1xxx IDE(builtin) configured for MWDMA2
Probing IDE interface ide0...
hda: Maxtor 6E040L0, ATA DISK drive
ide0 at 0xac800000-0xac800007,0xac8001c0 on irq 64
hda: max request size: 64KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, (U)DMA
--snipped--
In this example 'Maxtor 6E040L0'.
Step 2 : edit 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
Add your hard disc to the dma_white_list or dma_black_list structur.
Step 3 : Recompile the kernel
Enable MWDMA support in the kernel configuration. Recompile the kernel and
reboot.
Step 4 : Tests
If you have add a hard disc to the white list, please run some stress tests
for verification.
ACKNOWLEDGMENTS
---------------
......
drivers/ide/arm/bast-ide.c
View file @ a52b0d25
......@@ -55,8 +55,7 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq)
ide_init_port_data(hwif, i);
ide_init_port_hw(hwif, &hw);
hwif->mmio = 1;
hwif->quirkproc = NULL;
hwif->port_ops = NULL;
idx[0] = i;
......
drivers/ide/arm/icside.c
View file @ a52b0d25
......@@ -191,6 +191,10 @@ static void icside_maskproc(ide_drive_t *drive, int mask)
local_irq_restore(flags);
}
static const struct ide_port_ops icside_v6_no_dma_port_ops = {
.maskproc = icside_maskproc,
};
#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
/*
* SG-DMA support.
......@@ -266,6 +270,11 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data);
}
static const struct ide_port_ops icside_v6_port_ops = {
.set_dma_mode = icside_set_dma_mode,
.maskproc = icside_maskproc,
};
static void icside_dma_host_set(ide_drive_t *drive, int on)
{
}
......@@ -375,25 +384,33 @@ static void icside_dma_lost_irq(ide_drive_t *drive)
printk(KERN_ERR "%s: IRQ lost\n", drive->name);
}
static void icside_dma_init(ide_hwif_t *hwif)
static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
{
hwif->dmatable_cpu = NULL;
hwif->dmatable_dma = 0;
hwif->set_dma_mode = icside_set_dma_mode;
hwif->dma_host_set = icside_dma_host_set;
hwif->dma_setup = icside_dma_setup;
hwif->dma_exec_cmd = icside_dma_exec_cmd;
hwif->dma_start = icside_dma_start;
hwif->ide_dma_end = icside_dma_end;
hwif->ide_dma_test_irq = icside_dma_test_irq;
hwif->dma_timeout = icside_dma_timeout;
hwif->dma_lost_irq = icside_dma_lost_irq;
return 0;
}
static const struct ide_dma_ops icside_v6_dma_ops = {
.dma_host_set = icside_dma_host_set,
.dma_setup = icside_dma_setup,
.dma_exec_cmd = icside_dma_exec_cmd,
.dma_start = icside_dma_start,
.dma_end = icside_dma_end,
.dma_test_irq = icside_dma_test_irq,
.dma_timeout = icside_dma_timeout,
.dma_lost_irq = icside_dma_lost_irq,
};
#else
#define icside_dma_init(hwif) (0)
#define icside_v6_dma_ops NULL
#endif
static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d)
{
return -EOPNOTSUPP;
}
static ide_hwif_t *
icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *ec)
{
......@@ -408,7 +425,6 @@ icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *e
* Ensure we're using MMIO
*/
default_hwif_mmiops(hwif);
hwif->mmio = 1;
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
hwif->io_ports[i] = port;
......@@ -416,7 +432,6 @@ icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *e
}
hwif->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)base + info->ctrloffset;
hwif->irq = ec->irq;
hwif->noprobe = 0;
hwif->chipset = ide_acorn;
hwif->gendev.parent = &ec->dev;
hwif->dev = &ec->dev;
......@@ -462,8 +477,10 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
}
static const struct ide_port_info icside_v6_port_info __initdata = {
.init_dma = icside_dma_off_init,
.port_ops = &icside_v6_no_dma_port_ops,
.dma_ops = &icside_v6_dma_ops,
.host_flags = IDE_HFLAG_SERIALIZE |
IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
IDE_HFLAG_NO_AUTOTUNE,
.mwdma_mask = ATA_MWDMA2,
.swdma_mask = ATA_SWDMA2,
......@@ -526,7 +543,6 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
state->hwif[0] = hwif;
state->hwif[1] = mate;
hwif->maskproc = icside_maskproc;
hwif->hwif_data = state;
hwif->config_data = (unsigned long)ioc_base;
hwif->select_data = sel;
......@@ -537,10 +553,10 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
mate->select_data = sel | 1;
if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) {
icside_dma_init(hwif);
icside_dma_init(mate);
} else
d.mwdma_mask = d.swdma_mask = 0;
d.init_dma = icside_dma_init;
d.port_ops = &icside_v6_dma_port_ops;
d.dma_ops = NULL;
}
idx[0] = hwif->index;
idx[1] = mate->index;
......
drivers/ide/arm/ide_arm.c
View file @ a52b0d25
......@@ -14,6 +14,8 @@
#include <asm/mach-types.h>
#include <asm/irq.h>
#define DRV_NAME "ide_arm"
#ifdef CONFIG_ARCH_CLPS7500
# include <asm/arch/hardware.h>
#
......@@ -28,10 +30,24 @@ static int __init ide_arm_init(void)
{
ide_hwif_t *hwif;
hw_regs_t hw;
unsigned long base = IDE_ARM_IO, ctl = IDE_ARM_IO + 0x206;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
if (!request_region(base, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
DRV_NAME, base, base + 7);
return -EBUSY;
}
if (!request_region(ctl, 1, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
DRV_NAME, ctl);
release_region(base, 8);
return -EBUSY;
}
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, IDE_ARM_IO, IDE_ARM_IO + 0x206);
ide_std_init_ports(&hw, base, ctl);
hw.irq = IDE_ARM_IRQ;
hwif = ide_find_port();
......
drivers/ide/arm/palm_bk3710.c
View file @ a52b0d25
......@@ -317,17 +317,31 @@ static u8 __devinit palm_bk3710_cable_detect(ide_hwif_t *hwif)
return ATA_CBL_PATA80;
}
static void __devinit palm_bk3710_init_hwif(ide_hwif_t *hwif)
static int __devinit palm_bk3710_init_dma(ide_hwif_t *hwif,
const struct ide_port_info *d)
{
hwif->set_pio_mode = palm_bk3710_set_pio_mode;
hwif->set_dma_mode = palm_bk3710_set_dma_mode;
unsigned long base =
hwif->io_ports[IDE_DATA_OFFSET] - IDE_PALM_ATA_PRI_REG_OFFSET;
hwif->cable_detect = palm_bk3710_cable_detect;
printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
if (ide_allocate_dma_engine(hwif))
return -1;
ide_setup_dma(hwif, base);
return 0;
}
static const struct ide_port_ops palm_bk3710_ports_ops = {
.set_pio_mode = palm_bk3710_set_pio_mode,
.set_dma_mode = palm_bk3710_set_dma_mode,
.cable_detect = palm_bk3710_cable_detect,
};
static const struct ide_port_info __devinitdata palm_bk3710_port_info = {
.init_hwif = palm_bk3710_init_hwif,
.host_flags = IDE_HFLAG_NO_DMA, /* hack (no PCI) */
.init_dma = palm_bk3710_init_dma,
.port_ops = &palm_bk3710_ports_ops,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA4, /* (input clk 99MHz) */
.mwdma_mask = ATA_MWDMA2,
......@@ -394,8 +408,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
hwif->mmio = 1;
default_hwif_mmiops(hwif);
ide_setup_dma(hwif, mem->start);
idx[0] = i;
ide_device_add(idx, &palm_bk3710_port_info);
......
drivers/ide/arm/rapide.c
View file @ a52b0d25
......@@ -53,7 +53,6 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
ide_init_port_hw(hwif, &hw);
hwif->mmio = 1;
default_hwif_mmiops(hwif);
idx[0] = hwif->index;
......
drivers/ide/cris/ide-cris.c
View file @ a52b0d25
......@@ -673,11 +673,6 @@ cris_ide_inb(unsigned long reg)
return (unsigned char)cris_ide_inw(reg);
}
static int cris_dma_end (ide_drive_t *drive);
static int cris_dma_setup (ide_drive_t *drive);
static void cris_dma_exec_cmd (ide_drive_t *drive, u8 command);
static int cris_dma_test_irq(ide_drive_t *drive);
static void cris_dma_start(ide_drive_t *drive);
static void cris_ide_input_data (ide_drive_t *drive, void *, unsigned int);
static void cris_ide_output_data (ide_drive_t *drive, void *, unsigned int);
static void cris_atapi_input_bytes(ide_drive_t *drive, void *, unsigned int);
......@@ -782,8 +777,17 @@ static void __init cris_setup_ports(hw_regs_t *hw, unsigned long base)
hw->ack_intr = cris_ide_ack_intr;
}
static const struct ide_port_ops cris_port_ops = {
.set_pio_mode = cris_set_pio_mode,
.set_dma_mode = cris_set_dma_mode,
};
static const struct ide_dma_ops cris_dma_ops;
static const struct ide_port_info cris_port_info __initdata = {
.chipset = ide_etrax100,
.port_ops = &cris_port_ops,
.dma_ops = &cris_dma_ops,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA |
IDE_HFLAG_NO_DMA, /* no SFF-style DMA */
.pio_mask = ATA_PIO4,
......@@ -809,19 +813,11 @@ static int __init init_e100_ide(void)
continue;
ide_init_port_data(hwif, hwif->index);
ide_init_port_hw(hwif, &hw);
hwif->mmio = 1;
hwif->set_pio_mode = &cris_set_pio_mode;
hwif->set_dma_mode = &cris_set_dma_mode;
hwif->ata_input_data = &cris_ide_input_data;
hwif->ata_output_data = &cris_ide_output_data;
hwif->atapi_input_bytes = &cris_atapi_input_bytes;
hwif->atapi_output_bytes = &cris_atapi_output_bytes;
hwif->dma_host_set = &cris_dma_host_set;
hwif->ide_dma_end = &cris_dma_end;
hwif->dma_setup = &cris_dma_setup;
hwif->dma_exec_cmd = &cris_dma_exec_cmd;
hwif->ide_dma_test_irq = &cris_dma_test_irq;
hwif->dma_start = &cris_dma_start;
hwif->OUTB = &cris_ide_outb;
hwif->OUTW = &cris_ide_outw;
hwif->OUTBSYNC = &cris_ide_outbsync;
......@@ -1076,6 +1072,15 @@ static void cris_dma_start(ide_drive_t *drive)
}
}
static const struct ide_dma_ops cris_dma_ops = {
.dma_host_set = cris_dma_host_set,
.dma_setup = cris_dma_setup,
.dma_exec_cmd = cris_dma_exec_cmd,
.dma_start = cris_dma_start,
.dma_end = cris_dma_end,
.dma_test_irq = cris_dma_test_irq,
};
module_init(init_e100_ide);
MODULE_LICENSE("GPL");
drivers/ide/h8300/ide-h8300.c
View file @ a52b0d25
......@@ -74,7 +74,6 @@ static inline void hwif_setup(ide_hwif_t *hwif)
{
default_hwif_iops(hwif);
hwif->mmio = 1;
hwif->OUTW = mm_outw;
hwif->OUTSW = mm_outsw;
hwif->INW = mm_inw;
......
drivers/ide/ide-acpi.c
View file @ a52b0d25
......@@ -55,7 +55,7 @@ struct ide_acpi_hwif_link {
/* note: adds function name and KERN_DEBUG */
#ifdef DEBUGGING
#define DEBPRINT(fmt, args...) \
printk(KERN_DEBUG "%s: " fmt, __FUNCTION__, ## args)
printk(KERN_DEBUG "%s: " fmt, __func__, ## args)
#else
#define DEBPRINT(fmt, args...) do {} while (0)
#endif /* DEBUGGING */
......@@ -309,7 +309,7 @@ static int do_drive_get_GTF(ide_drive_t *drive,
if (ACPI_FAILURE(status)) {
printk(KERN_DEBUG
"%s: Run _GTF error: status = 0x%x\n",
__FUNCTION__, status);
__func__, status);
goto out;
}
......@@ -335,7 +335,7 @@ static int do_drive_get_GTF(ide_drive_t *drive,
out_obj->buffer.length % REGS_PER_GTF) {
printk(KERN_ERR
"%s: unexpected GTF length (%d) or addr (0x%p)\n",
__FUNCTION__, out_obj->buffer.length,
__func__, out_obj->buffer.length,
out_obj->buffer.pointer);
err = -ENOENT;
kfree(output.pointer);
......@@ -384,7 +384,7 @@ static int taskfile_load_raw(ide_drive_t *drive,
err = ide_no_data_taskfile(drive, &args);
if (err)
printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n",
__FUNCTION__, err);
__func__, err);
return err;
}
......@@ -422,7 +422,7 @@ static int do_drive_set_taskfiles(ide_drive_t *drive,
if (gtf_length % REGS_PER_GTF) {
printk(KERN_ERR "%s: unexpected GTF length (%d)\n",
__FUNCTION__, gtf_length);
__func__, gtf_length);
goto out;
}
......@@ -547,7 +547,7 @@ void ide_acpi_get_timing(ide_hwif_t *hwif)
printk(KERN_ERR
"%s: unexpected _GTM length (0x%x)[should be 0x%zx] or "
"addr (0x%p)\n",
__FUNCTION__, out_obj->buffer.length,
__func__, out_obj->buffer.length,
sizeof(struct GTM_buffer), out_obj->buffer.pointer);
return;
}
......
drivers/ide/ide-cd.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/ide-dma.c
View file @ a52b0d25
......@@ -102,7 +102,7 @@ ide_startstop_t ide_dma_intr (ide_drive_t *drive)
{
u8 stat = 0, dma_stat = 0;
dma_stat = HWIF(drive)->ide_dma_end(drive);
dma_stat = drive->hwif->dma_ops->dma_end(drive);
stat = ide_read_status(drive);
if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) {
......@@ -394,7 +394,7 @@ void ide_dma_off_quietly(ide_drive_t *drive)
drive->using_dma = 0;
ide_toggle_bounce(drive, 0);
drive->hwif->dma_host_set(drive, 0);
drive->hwif->dma_ops->dma_host_set(drive, 0);
}
EXPORT_SYMBOL(ide_dma_off_quietly);
......@@ -427,7 +427,7 @@ void ide_dma_on(ide_drive_t *drive)
drive->using_dma = 1;
ide_toggle_bounce(drive, 1);
drive->hwif->dma_host_set(drive, 1);
drive->hwif->dma_ops->dma_host_set(drive, 1);
}
#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
......@@ -482,11 +482,12 @@ int ide_dma_setup(ide_drive_t *drive)
EXPORT_SYMBOL_GPL(ide_dma_setup);
static void ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
void ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
{
/* issue cmd to drive */
ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, dma_timer_expiry);
}
EXPORT_SYMBOL_GPL(ide_dma_exec_cmd);
void ide_dma_start(ide_drive_t *drive)
{
......@@ -532,7 +533,7 @@ int __ide_dma_end (ide_drive_t *drive)
EXPORT_SYMBOL(__ide_dma_end);
/* returns 1 if dma irq issued, 0 otherwise */
static int __ide_dma_test_irq(ide_drive_t *drive)
int ide_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 dma_stat = hwif->INB(hwif->dma_status);
......@@ -542,9 +543,10 @@ static int __ide_dma_test_irq(ide_drive_t *drive)
return 1;
if (!drive->waiting_for_dma)
printk(KERN_WARNING "%s: (%s) called while not waiting\n",
drive->name, __FUNCTION__);
drive->name, __func__);
return 0;
}
EXPORT_SYMBOL_GPL(ide_dma_test_irq);
#else
static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
......@@ -574,6 +576,7 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
{
struct hd_driveid *id = drive->id;
ide_hwif_t *hwif = drive->hwif;
const struct ide_port_ops *port_ops = hwif->port_ops;
unsigned int mask = 0;
switch(base) {
......@@ -581,8 +584,8 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
if ((id->field_valid & 4) == 0)
break;
if (hwif->udma_filter)
mask = hwif->udma_filter(drive);
if (port_ops && port_ops->udma_filter)
mask = port_ops->udma_filter(drive);
else
mask = hwif->ultra_mask;
mask &= id->dma_ultra;
......@@ -598,8 +601,8 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
case XFER_MW_DMA_0:
if ((id->field_valid & 2) == 0)
break;
if (hwif->mdma_filter)
mask = hwif->mdma_filter(drive);
if (port_ops && port_ops->mdma_filter)
mask = port_ops->mdma_filter(drive);
else
mask = hwif->mwdma_mask;
mask &= id->dma_mword;
......@@ -801,15 +804,15 @@ void ide_dma_timeout (ide_drive_t *drive)
printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name);
if (hwif->ide_dma_test_irq(drive))
if (hwif->dma_ops->dma_test_irq(drive))
return;
hwif->ide_dma_end(drive);
hwif->dma_ops->dma_end(drive);
}
EXPORT_SYMBOL(ide_dma_timeout);
static void ide_release_dma_engine(ide_hwif_t *hwif)
void ide_release_dma_engine(ide_hwif_t *hwif)
{
if (hwif->dmatable_cpu) {
struct pci_dev *pdev = to_pci_dev(hwif->dev);
......@@ -820,28 +823,7 @@ static void ide_release_dma_engine(ide_hwif_t *hwif)
}
}
static int ide_release_iomio_dma(ide_hwif_t *hwif)
{
release_region(hwif->dma_base, 8);
if (hwif->extra_ports)
release_region(hwif->extra_base, hwif->extra_ports);
return 1;
}
/*
* Needed for allowing full modular support of ide-driver
*/
int ide_release_dma(ide_hwif_t *hwif)
{
ide_release_dma_engine(hwif);
if (hwif->mmio)
return 1;
else
return ide_release_iomio_dma(hwif);
}
static int ide_allocate_dma_engine(ide_hwif_t *hwif)
int ide_allocate_dma_engine(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
......@@ -853,65 +835,25 @@ static int ide_allocate_dma_engine(ide_hwif_t *hwif)
return 0;
printk(KERN_ERR "%s: -- Error, unable to allocate DMA table.\n",
hwif->cds->name);
hwif->name);
return 1;
}
static int ide_mapped_mmio_dma(ide_hwif_t *hwif, unsigned long base)
{
printk(KERN_INFO " %s: MMIO-DMA ", hwif->name);
return 0;
}
static int ide_iomio_dma(ide_hwif_t *hwif, unsigned long base)
{
printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx",
hwif->name, base, base + 7);
if (!request_region(base, 8, hwif->name)) {
printk(" -- Error, ports in use.\n");
return 1;
}
if (hwif->cds->extra) {
hwif->extra_base = base + (hwif->channel ? 8 : 16);
if (!hwif->mate || !hwif->mate->extra_ports) {
if (!request_region(hwif->extra_base,
hwif->cds->extra, hwif->cds->name)) {
printk(" -- Error, extra ports in use.\n");
release_region(base, 8);
return 1;
}
hwif->extra_ports = hwif->cds->extra;
}
}
return 0;
}
static int ide_dma_iobase(ide_hwif_t *hwif, unsigned long base)
{
if (hwif->mmio)
return ide_mapped_mmio_dma(hwif, base);
return ide_iomio_dma(hwif, base);
}
EXPORT_SYMBOL_GPL(ide_allocate_dma_engine);
static const struct ide_dma_ops sff_dma_ops = {
.dma_host_set = ide_dma_host_set,
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
.dma_end = __ide_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_timeout = ide_dma_timeout,
.dma_lost_irq = ide_dma_lost_irq,
};
void ide_setup_dma(ide_hwif_t *hwif, unsigned long base)
{
u8 dma_stat;
if (ide_dma_iobase(hwif, base))
return;
if (ide_allocate_dma_engine(hwif)) {
ide_release_dma(hwif);
return;
}
hwif->dma_base = base;
if (!hwif->dma_command)
......@@ -925,27 +867,7 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base)
if (!hwif->dma_prdtable)
hwif->dma_prdtable = hwif->dma_base + 4;
if (!hwif->dma_host_set)
hwif->dma_host_set = &ide_dma_host_set;
if (!hwif->dma_setup)
hwif->dma_setup = &ide_dma_setup;
if (!hwif->dma_exec_cmd)
hwif->dma_exec_cmd = &ide_dma_exec_cmd;
if (!hwif->dma_start)
hwif->dma_start = &ide_dma_start;
if (!hwif->ide_dma_end)
hwif->ide_dma_end = &__ide_dma_end;
if (!hwif->ide_dma_test_irq)
hwif->ide_dma_test_irq = &__ide_dma_test_irq;
if (!hwif->dma_timeout)
hwif->dma_timeout = &ide_dma_timeout;
if (!hwif->dma_lost_irq)
hwif->dma_lost_irq = &ide_dma_lost_irq;
dma_stat = hwif->INB(hwif->dma_status);
printk(KERN_CONT ", BIOS settings: %s:%s, %s:%s\n",
hwif->drives[0].name, (dma_stat & 0x20) ? "DMA" : "PIO",
hwif->drives[1].name, (dma_stat & 0x40) ? "DMA" : "PIO");
hwif->dma_ops = &sff_dma_ops;
}
EXPORT_SYMBOL_GPL(ide_setup_dma);
......
drivers/ide/ide-floppy.c
View file @ a52b0d25
......@@ -411,7 +411,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
debug_log("Reached %s interrupt handler\n", __func__);
if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
dma_error = hwif->ide_dma_end(drive);
dma_error = hwif->dma_ops->dma_end(drive);
if (dma_error) {
printk(KERN_ERR "%s: DMA %s error\n", drive->name,
rq_data_dir(rq) ? "write" : "read");
......@@ -663,7 +663,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
dma = 0;
if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma)
dma = !hwif->dma_setup(drive);
dma = !hwif->dma_ops->dma_setup(drive);
ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
IDE_TFLAG_OUT_DEVICE, bcount, dma);
......@@ -671,7 +671,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
if (dma) {
/* Begin DMA, if necessary */
pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
hwif->dma_start(drive);
hwif->dma_ops->dma_start(drive);
}
/* Can we transfer the packet when we get the interrupt or wait? */
......
drivers/ide/ide-generic.c
View file @ a52b0d25
......@@ -94,7 +94,24 @@ static int __init ide_generic_init(void)
unsigned long io_addr = ide_default_io_base(i);
hw_regs_t hw;
idx[i] = 0xff;
if (io_addr) {
if (!request_region(io_addr, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX "
"not free.\n",
DRV_NAME, io_addr, io_addr + 7);
continue;
}
if (!request_region(io_addr + 0x206, 1, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX "
"not free.\n",
DRV_NAME, io_addr + 0x206);
release_region(io_addr, 8);
continue;
}
/*
* Skip probing if the corresponding
* slot is already occupied.
......@@ -111,8 +128,7 @@ static int __init ide_generic_init(void)
ide_init_port_hw(hwif, &hw);
idx[i] = i;
} else
idx[i] = 0xff;
}
}
ide_device_add_all(idx, NULL);
......
drivers/ide/ide-io.c
View file @ a52b0d25
......@@ -218,7 +218,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
* we could be smarter and check for current xfer_speed
* in struct drive etc...
*/
if (drive->hwif->dma_host_set == NULL)
if (drive->hwif->dma_ops == NULL)
break;
/*
* TODO: respect ->using_dma setting
......@@ -721,6 +721,7 @@ static ide_startstop_t do_special (ide_drive_t *drive)
#endif
if (s->b.set_tune) {
ide_hwif_t *hwif = drive->hwif;
const struct ide_port_ops *port_ops = hwif->port_ops;
u8 req_pio = drive->tune_req;
s->b.set_tune = 0;
......@@ -733,10 +734,10 @@ static ide_startstop_t do_special (ide_drive_t *drive)
unsigned long flags;
spin_lock_irqsave(&ide_lock, flags);
hwif->set_pio_mode(drive, req_pio);
port_ops->set_pio_mode(drive, req_pio);
spin_unlock_irqrestore(&ide_lock, flags);
} else
hwif->set_pio_mode(drive, req_pio);
port_ops->set_pio_mode(drive, req_pio);
} else {
int keep_dma = drive->using_dma;
......@@ -1237,12 +1238,12 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error)
if (error < 0) {
printk(KERN_WARNING "%s: DMA timeout error\n", drive->name);
(void)HWIF(drive)->ide_dma_end(drive);
(void)hwif->dma_ops->dma_end(drive);
ret = ide_error(drive, "dma timeout error",
ide_read_status(drive));
} else {
printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name);
hwif->dma_timeout(drive);
hwif->dma_ops->dma_timeout(drive);
}
/*
......@@ -1354,7 +1355,7 @@ void ide_timer_expiry (unsigned long data)
startstop = handler(drive);
} else if (drive_is_ready(drive)) {
if (drive->waiting_for_dma)
hwgroup->hwif->dma_lost_irq(drive);
hwif->dma_ops->dma_lost_irq(drive);
(void)ide_ack_intr(hwif);
printk(KERN_WARNING "%s: lost interrupt\n", drive->name);
startstop = handler(drive);
......
drivers/ide/ide-iops.c
View file @ a52b0d25
......@@ -159,17 +159,20 @@ EXPORT_SYMBOL(default_hwif_mmiops);
void SELECT_DRIVE (ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
const struct ide_port_ops *port_ops = hwif->port_ops;
if (hwif->selectproc)
hwif->selectproc(drive);
if (port_ops && port_ops->selectproc)
port_ops->selectproc(drive);
hwif->OUTB(drive->select.all, hwif->io_ports[IDE_SELECT_OFFSET]);
}
void SELECT_MASK (ide_drive_t *drive, int mask)
{
if (HWIF(drive)->maskproc)
HWIF(drive)->maskproc(drive, mask);
const struct ide_port_ops *port_ops = drive->hwif->port_ops;
if (port_ops && port_ops->maskproc)
port_ops->maskproc(drive, mask);
}
/*
......@@ -429,7 +432,7 @@ int drive_is_ready (ide_drive_t *drive)
u8 stat = 0;
if (drive->waiting_for_dma)
return hwif->ide_dma_test_irq(drive);
return hwif->dma_ops->dma_test_irq(drive);
#if 0
/* need to guarantee 400ns since last command was issued */
......@@ -700,8 +703,8 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
// msleep(50);
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_host_set) /* check if host supports DMA */
hwif->dma_host_set(drive, 0);
if (hwif->dma_ops) /* check if host supports DMA */
hwif->dma_ops->dma_host_set(drive, 0);
#endif
/* Skip setting PIO flow-control modes on pre-EIDE drives */
......@@ -759,8 +762,8 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
#ifdef CONFIG_BLK_DEV_IDEDMA
if ((speed >= XFER_SW_DMA_0 || (hwif->host_flags & IDE_HFLAG_VDMA)) &&
drive->using_dma)
hwif->dma_host_set(drive, 1);
else if (hwif->dma_host_set) /* check if host supports DMA */
hwif->dma_ops->dma_host_set(drive, 1);
else if (hwif->dma_ops) /* check if host supports DMA */
ide_dma_off_quietly(drive);
#endif
......@@ -905,10 +908,11 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive)
{
ide_hwgroup_t *hwgroup = HWGROUP(drive);
ide_hwif_t *hwif = HWIF(drive);
const struct ide_port_ops *port_ops = hwif->port_ops;
u8 tmp;
if (hwif->reset_poll != NULL) {
if (hwif->reset_poll(drive)) {
if (port_ops && port_ops->reset_poll) {
if (port_ops->reset_poll(drive)) {
printk(KERN_ERR "%s: host reset_poll failure for %s.\n",
hwif->name, drive->name);
return ide_stopped;
......@@ -974,6 +978,8 @@ static void ide_disk_pre_reset(ide_drive_t *drive)
static void pre_reset(ide_drive_t *drive)
{
const struct ide_port_ops *port_ops = drive->hwif->port_ops;
if (drive->media == ide_disk)
ide_disk_pre_reset(drive);
else
......@@ -994,8 +1000,8 @@ static void pre_reset(ide_drive_t *drive)
return;
}
if (HWIF(drive)->pre_reset != NULL)
HWIF(drive)->pre_reset(drive);
if (port_ops && port_ops->pre_reset)
port_ops->pre_reset(drive);
if (drive->current_speed != 0xff)
drive->desired_speed = drive->current_speed;
......@@ -1023,6 +1029,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
unsigned long flags;
ide_hwif_t *hwif;
ide_hwgroup_t *hwgroup;
const struct ide_port_ops *port_ops;
u8 ctl;
spin_lock_irqsave(&ide_lock, flags);
......@@ -1089,8 +1096,9 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
* state when the disks are reset this way. At least, the Winbond
* 553 documentation says that
*/
if (hwif->resetproc)
hwif->resetproc(drive);
port_ops = hwif->port_ops;
if (port_ops && port_ops->resetproc)
port_ops->resetproc(drive);
spin_unlock_irqrestore(&ide_lock, flags);
return ide_started;
......
drivers/ide/ide-lib.c
View file @ a52b0d25
......@@ -85,7 +85,7 @@ static u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
mode = XFER_PIO_4;
}
// printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed);
/* printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */
return min(speed, mode);
}
......@@ -288,9 +288,10 @@ EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
void ide_set_pio(ide_drive_t *drive, u8 req_pio)
{
ide_hwif_t *hwif = drive->hwif;
const struct ide_port_ops *port_ops = hwif->port_ops;
u8 host_pio, pio;
if (hwif->set_pio_mode == NULL ||
if (port_ops == NULL || port_ops->set_pio_mode == NULL ||
(hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
return;
......@@ -343,29 +344,30 @@ void ide_toggle_bounce(ide_drive_t *drive, int on)
int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = drive->hwif;
const struct ide_port_ops *port_ops = hwif->port_ops;
if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
return 0;
if (hwif->set_pio_mode == NULL)
if (port_ops == NULL || port_ops->set_pio_mode == NULL)
return -1;
/*
* TODO: temporary hack for some legacy host drivers that didn't
* set transfer mode on the device in ->set_pio_mode method...
*/
if (hwif->set_dma_mode == NULL) {
hwif->set_pio_mode(drive, mode - XFER_PIO_0);
if (port_ops->set_dma_mode == NULL) {
port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
return 0;
}
if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
if (ide_config_drive_speed(drive, mode))
return -1;
hwif->set_pio_mode(drive, mode - XFER_PIO_0);
port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
return 0;
} else {
hwif->set_pio_mode(drive, mode - XFER_PIO_0);
port_ops->set_pio_mode(drive, mode - XFER_PIO_0);
return ide_config_drive_speed(drive, mode);
}
}
......@@ -373,20 +375,21 @@ int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
int ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = drive->hwif;
const struct ide_port_ops *port_ops = hwif->port_ops;
if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
return 0;
if (hwif->set_dma_mode == NULL)
if (port_ops == NULL || port_ops->set_dma_mode == NULL)
return -1;
if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
if (ide_config_drive_speed(drive, mode))
return -1;
hwif->set_dma_mode(drive, mode);
port_ops->set_dma_mode(drive, mode);
return 0;
} else {
hwif->set_dma_mode(drive, mode);
port_ops->set_dma_mode(drive, mode);
return ide_config_drive_speed(drive, mode);
}
}
......@@ -406,8 +409,9 @@ EXPORT_SYMBOL_GPL(ide_set_dma_mode);
int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
{
ide_hwif_t *hwif = drive->hwif;
const struct ide_port_ops *port_ops = hwif->port_ops;
if (hwif->set_dma_mode == NULL ||
if (port_ops == NULL || port_ops->set_dma_mode == NULL ||
(hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
return -1;
......
drivers/ide/ide-pnp.c
View file @ a52b0d25
......@@ -18,6 +18,8 @@
#include <linux/pnp.h>
#include <linux/ide.h>
#define DRV_NAME "ide-pnp"
/* Add your devices here :)) */
static struct pnp_device_id idepnp_devices[] = {
/* Generic ESDI/IDE/ATA compatible hard disk controller */
......@@ -29,13 +31,29 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
hw_regs_t hw;
ide_hwif_t *hwif;
unsigned long base, ctl;
if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && pnp_irq_valid(dev, 0)))
return -1;
base = pnp_port_start(dev, 0);
ctl = pnp_port_start(dev, 1);
if (!request_region(base, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
DRV_NAME, base, base + 7);
return -EBUSY;
}
if (!request_region(ctl, 1, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
DRV_NAME, ctl);
release_region(base, 8);
return -EBUSY;
}
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, pnp_port_start(dev, 0),
pnp_port_start(dev, 1));
ide_std_init_ports(&hw, base, ctl);
hw.irq = pnp_irq(dev, 0);
hwif = ide_find_port();
......@@ -54,6 +72,9 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
return 0;
}
release_region(ctl, 1);
release_region(base, 8);
return -1;
}
......@@ -65,6 +86,9 @@ static void idepnp_remove(struct pnp_dev *dev)
ide_unregister(hwif->index);
else
printk(KERN_ERR "idepnp: Unable to remove device, please report.\n");
release_region(pnp_port_start(dev, 1), 1);
release_region(pnp_port_start(dev, 0), 8);
}
static struct pnp_driver idepnp_driver = {
......
drivers/ide/ide-probe.c
View file @ a52b0d25
......@@ -644,7 +644,7 @@ static int ide_register_port(ide_hwif_t *hwif)
ret = device_register(&hwif->gendev);
if (ret < 0) {
printk(KERN_WARNING "IDE: %s: device_register error: %d\n",
__FUNCTION__, ret);
__func__, ret);
goto out;
}
......@@ -773,8 +773,7 @@ static int ide_probe_port(ide_hwif_t *hwif)
BUG_ON(hwif->present);
if (hwif->noprobe ||
(hwif->drives[0].noprobe && hwif->drives[1].noprobe))
if (hwif->drives[0].noprobe && hwif->drives[1].noprobe)
return -EACCES;
/*
......@@ -821,13 +820,14 @@ static int ide_probe_port(ide_hwif_t *hwif)
static void ide_port_tune_devices(ide_hwif_t *hwif)
{
const struct ide_port_ops *port_ops = hwif->port_ops;
int unit;
for (unit = 0; unit < MAX_DRIVES; unit++) {
ide_drive_t *drive = &hwif->drives[unit];
if (drive->present && hwif->quirkproc)
hwif->quirkproc(drive);
if (drive->present && port_ops && port_ops->quirkproc)
port_ops->quirkproc(drive);
}
for (unit = 0; unit < MAX_DRIVES; ++unit) {
......@@ -843,7 +843,7 @@ static void ide_port_tune_devices(ide_hwif_t *hwif)
drive->nice1 = 1;
if (hwif->dma_host_set)
if (hwif->dma_ops)
ide_set_dma(drive);
}
}
......@@ -1324,6 +1324,7 @@ static void hwif_register_devices(ide_hwif_t *hwif)
static void ide_port_init_devices(ide_hwif_t *hwif)
{
const struct ide_port_ops *port_ops = hwif->port_ops;
int i;
for (i = 0; i < MAX_DRIVES; i++) {
......@@ -1339,8 +1340,8 @@ static void ide_port_init_devices(ide_hwif_t *hwif)
drive->autotune = 1;
}
if (hwif->port_init_devs)
hwif->port_init_devs(hwif);
if (port_ops && port_ops->port_init_devs)
port_ops->port_init_devs(hwif);
}
static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
......@@ -1355,9 +1356,6 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
if (d->init_iops)
d->init_iops(hwif);
if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0)
ide_hwif_setup_dma(hwif, d);
if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) ||
(d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS))
hwif->irq = port ? 15 : 14;
......@@ -1365,16 +1363,36 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
hwif->host_flags = d->host_flags;
hwif->pio_mask = d->pio_mask;
if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate)
hwif->mate->serialized = hwif->serialized = 1;
/* ->set_pio_mode for DTC2278 is currently limited to port 0 */
if (hwif->chipset != ide_dtc2278 || hwif->channel == 0)
hwif->port_ops = d->port_ops;
if ((d->host_flags & IDE_HFLAG_SERIALIZE) ||
((d->host_flags & IDE_HFLAG_SERIALIZE_DMA) && hwif->dma_base)) {
if (hwif->mate)
hwif->mate->serialized = hwif->serialized = 1;
}
hwif->swdma_mask = d->swdma_mask;
hwif->mwdma_mask = d->mwdma_mask;
hwif->ultra_mask = d->udma_mask;
/* reset DMA masks only for SFF-style DMA controllers */
if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0 && hwif->dma_base == 0)
hwif->swdma_mask = hwif->mwdma_mask = hwif->ultra_mask = 0;
if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) {
int rc;
if (d->init_dma)
rc = d->init_dma(hwif, d);
else
rc = ide_hwif_setup_dma(hwif, d);
if (rc < 0) {
printk(KERN_INFO "%s: DMA disabled\n", hwif->name);
hwif->swdma_mask = 0;
hwif->mwdma_mask = 0;
hwif->ultra_mask = 0;
} else if (d->dma_ops)
hwif->dma_ops = d->dma_ops;
}
if (d->host_flags & IDE_HFLAG_RQSIZE_256)
hwif->rqsize = 256;
......@@ -1386,9 +1404,11 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
static void ide_port_cable_detect(ide_hwif_t *hwif)
{
if (hwif->cable_detect && (hwif->ultra_mask & 0x78)) {
const struct ide_port_ops *port_ops = hwif->port_ops;
if (port_ops && port_ops->cable_detect && (hwif->ultra_mask & 0x78)) {
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = hwif->cable_detect(hwif);
hwif->cbl = port_ops->cable_detect(hwif);
}
}
......@@ -1523,25 +1543,15 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
hwif = &ide_hwifs[idx[i]];
if ((hwif->chipset != ide_4drives || !hwif->mate ||
!hwif->mate->present) && ide_hwif_request_regions(hwif)) {
printk(KERN_ERR "%s: ports already in use, "
"skipping probe\n", hwif->name);
continue;
}
if (ide_probe_port(hwif) < 0) {
ide_hwif_release_regions(hwif);
continue;
}
hwif->present = 1;
if (ide_probe_port(hwif) == 0)
hwif->present = 1;
if (hwif->chipset != ide_4drives || !hwif->mate ||
!hwif->mate->present)
ide_register_port(hwif);
ide_port_tune_devices(hwif);
if (hwif->present)
ide_port_tune_devices(hwif);
}
for (i = 0; i < MAX_HWIFS; i++) {
......@@ -1550,9 +1560,6 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
hwif = &ide_hwifs[idx[i]];
if (!hwif->present)
continue;
if (hwif_init(hwif) == 0) {
printk(KERN_INFO "%s: failed to initialize IDE "
"interface\n", hwif->name);
......@@ -1561,10 +1568,13 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
continue;
}
ide_port_setup_devices(hwif);
if (hwif->present)
ide_port_setup_devices(hwif);
ide_acpi_init(hwif);
ide_acpi_port_init_devices(hwif);
if (hwif->present)
ide_acpi_port_init_devices(hwif);
}
for (i = 0; i < MAX_HWIFS; i++) {
......@@ -1573,11 +1583,11 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
hwif = &ide_hwifs[idx[i]];
if (hwif->present) {
if (hwif->chipset == ide_unknown)
hwif->chipset = ide_generic;
if (hwif->chipset == ide_unknown)
hwif->chipset = ide_generic;
if (hwif->present)
hwif_register_devices(hwif);
}
}
for (i = 0; i < MAX_HWIFS; i++) {
......@@ -1586,11 +1596,11 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
hwif = &ide_hwifs[idx[i]];
if (hwif->present) {
ide_sysfs_register_port(hwif);
ide_proc_register_port(hwif);
ide_sysfs_register_port(hwif);
ide_proc_register_port(hwif);
if (hwif->present)
ide_proc_port_register_devices(hwif);
}
}
return rc;
......@@ -1626,3 +1636,67 @@ void ide_port_scan(ide_hwif_t *hwif)
ide_proc_port_register_devices(hwif);
}
EXPORT_SYMBOL_GPL(ide_port_scan);
static void ide_legacy_init_one(u8 *idx, hw_regs_t *hw, u8 port_no,
const struct ide_port_info *d,
unsigned long config)
{
ide_hwif_t *hwif;
unsigned long base, ctl;
int irq;
if (port_no == 0) {
base = 0x1f0;
ctl = 0x3f6;
irq = 14;
} else {
base = 0x170;
ctl = 0x376;
irq = 15;
}
if (!request_region(base, 8, d->name)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
d->name, base, base + 7);
return;
}
if (!request_region(ctl, 1, d->name)) {
printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
d->name, ctl);
release_region(base, 8);
return;
}
ide_std_init_ports(hw, base, ctl);
hw->irq = irq;
hwif = ide_find_port_slot(d);
if (hwif) {
ide_init_port_hw(hwif, hw);
if (config)
hwif->config_data = config;
idx[port_no] = hwif->index;
}
}
int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config)
{
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
hw_regs_t hw[2];
memset(&hw, 0, sizeof(hw));
if ((d->host_flags & IDE_HFLAG_QD_2ND_PORT) == 0)
ide_legacy_init_one(idx, &hw[0], 0, d, config);
ide_legacy_init_one(idx, &hw[1], 1, d, config);
if (idx[0] == 0xff && idx[1] == 0xff &&
(d->host_flags & IDE_HFLAG_SINGLE))
return -ENOENT;
ide_device_add(idx, d);
return 0;
}
EXPORT_SYMBOL_GPL(ide_legacy_device_add);
drivers/ide/ide-proc.c
View file @ a52b0d25
......@@ -599,14 +599,14 @@ static int ide_replace_subdriver(ide_drive_t *drive, const char *driver)
err = device_attach(dev);
if (err < 0)
printk(KERN_WARNING "IDE: %s: device_attach error: %d\n",
__FUNCTION__, err);
__func__, err);
drive->driver_req[0] = 0;
if (dev->driver == NULL) {
err = device_attach(dev);
if (err < 0)
printk(KERN_WARNING
"IDE: %s: device_attach(2) error: %d\n",
__FUNCTION__, err);
__func__, err);
}
if (dev->driver && !strcmp(dev->driver->name, driver))
ret = 0;
......@@ -820,7 +820,7 @@ static int ide_drivers_show(struct seq_file *s, void *p)
err = bus_for_each_drv(&ide_bus_type, NULL, s, proc_print_driver);
if (err < 0)
printk(KERN_WARNING "IDE: %s: bus_for_each_drv error: %d\n",
__FUNCTION__, err);
__func__, err);
return 0;
}
......
drivers/ide/ide-scan-pci.c
View file @ a52b0d25
......@@ -102,7 +102,7 @@ static int __init ide_scan_pcibus(void)
if (__pci_register_driver(d, d->driver.owner,
d->driver.mod_name))
printk(KERN_ERR "%s: failed to register %s driver\n",
__FUNCTION__, d->driver.mod_name);
__func__, d->driver.mod_name);
}
return 0;
......
drivers/ide/ide-tape.c
View file @ a52b0d25
......@@ -993,7 +993,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
stat = ide_read_status(drive);
if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) {
if (hwif->dma_ops->dma_end(drive) || (stat & ERR_STAT)) {
/*
* A DMA error is sometimes expected. For example,
* if the tape is crossing a filemark during a
......@@ -1213,7 +1213,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
#ifdef CONFIG_BLK_DEV_IDEDMA
/* Begin DMA, if necessary */
if (pc->flags & PC_FLAG_DMA_IN_PROGRESS)
hwif->dma_start(drive);
hwif->dma_ops->dma_start(drive);
#endif
/* Send the actual packet */
HWIF(drive)->atapi_output_bytes(drive, pc->c, 12);
......@@ -1279,7 +1279,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
ide_dma_off(drive);
}
if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma)
dma_ok = !hwif->dma_setup(drive);
dma_ok = !hwif->dma_ops->dma_setup(drive);
ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
IDE_TFLAG_OUT_DEVICE, bcount, dma_ok);
......@@ -1605,14 +1605,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
}
/* Pipeline related functions */
static inline int idetape_pipeline_active(idetape_tape_t *tape)
{
int rc1, rc2;
rc1 = test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags);
rc2 = (tape->active_data_rq != NULL);
return rc1;
}
/*
* The function below uses __get_free_page to allocate a pipeline stage, along
......@@ -2058,7 +2050,7 @@ static int __idetape_discard_read_pipeline(ide_drive_t *drive)
spin_lock_irqsave(&tape->lock, flags);
tape->next_stage = NULL;
if (idetape_pipeline_active(tape))
if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags))
idetape_wait_for_request(drive, tape->active_data_rq);
spin_unlock_irqrestore(&tape->lock, flags);
......@@ -2131,7 +2123,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
if (idetape_pipeline_active(tape)) {
if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) {
printk(KERN_ERR "ide-tape: bug: the pipeline is active in %s\n",
__func__);
return (0);
......@@ -2162,8 +2154,7 @@ static void idetape_plug_pipeline(ide_drive_t *drive)
if (tape->next_stage == NULL)
return;
if (!idetape_pipeline_active(tape)) {
set_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags);
if (!test_and_set_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) {
idetape_activate_next_stage(drive);
(void) ide_do_drive_cmd(drive, tape->active_data_rq, ide_end);
}
......@@ -2242,13 +2233,14 @@ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
/* Attempt to allocate a new stage. Beware possible race conditions. */
while ((new_stage = idetape_kmalloc_stage(tape)) == NULL) {
spin_lock_irqsave(&tape->lock, flags);
if (idetape_pipeline_active(tape)) {
if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) {
idetape_wait_for_request(drive, tape->active_data_rq);
spin_unlock_irqrestore(&tape->lock, flags);
} else {
spin_unlock_irqrestore(&tape->lock, flags);
idetape_plug_pipeline(drive);
if (idetape_pipeline_active(tape))
if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE,
&tape->flags))
continue;
/*
* The machine is short on memory. Fallback to non-
......@@ -2277,7 +2269,7 @@ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
* starting to service requests, so that we will be able to keep up with
* the higher speeds of the tape.
*/
if (!idetape_pipeline_active(tape)) {
if (!test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) {
if (tape->nr_stages >= tape->max_stages * 9 / 10 ||
tape->nr_stages >= tape->max_stages -
tape->uncontrolled_pipeline_head_speed * 3 * 1024 /
......@@ -2304,10 +2296,11 @@ static void idetape_wait_for_pipeline(ide_drive_t *drive)
idetape_tape_t *tape = drive->driver_data;
unsigned long flags;
while (tape->next_stage || idetape_pipeline_active(tape)) {
while (tape->next_stage || test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE,
&tape->flags)) {
idetape_plug_pipeline(drive);
spin_lock_irqsave(&tape->lock, flags);
if (idetape_pipeline_active(tape))
if (test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags))
idetape_wait_for_request(drive, tape->active_data_rq);
spin_unlock_irqrestore(&tape->lock, flags);
}
......@@ -2464,7 +2457,7 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages)
new_stage = idetape_kmalloc_stage(tape);
}
}
if (!idetape_pipeline_active(tape)) {
if (!test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags)) {
if (tape->nr_pending_stages >= 3 * max_stages / 4) {
tape->measure_insert_time = 1;
tape->insert_time = jiffies;
......
drivers/ide/ide-taskfile.c
View file @ a52b0d25
......@@ -135,6 +135,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
ide_hwif_t *hwif = HWIF(drive);
struct ide_taskfile *tf = &task->tf;
ide_handler_t *handler = NULL;
const struct ide_dma_ops *dma_ops = hwif->dma_ops;
if (task->data_phase == TASKFILE_MULTI_IN ||
task->data_phase == TASKFILE_MULTI_OUT) {
......@@ -178,10 +179,10 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
return ide_started;
default:
if (task_dma_ok(task) == 0 || drive->using_dma == 0 ||
hwif->dma_setup(drive))
dma_ops->dma_setup(drive))
return ide_stopped;
hwif->dma_exec_cmd(drive, tf->command);
hwif->dma_start(drive);
dma_ops->dma_exec_cmd(drive, tf->command);
dma_ops->dma_start(drive);
return ide_started;
}
}
......@@ -455,7 +456,7 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive)
/* Error? */
if (stat & ERR_STAT)
return task_error(drive, rq, __FUNCTION__, stat);
return task_error(drive, rq, __func__, stat);
/* Didn't want any data? Odd. */
if (!(stat & DRQ_STAT))
......@@ -467,7 +468,7 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive)
if (!hwif->nleft) {
stat = wait_drive_not_busy(drive);
if (!OK_STAT(stat, 0, BAD_STAT))
return task_error(drive, rq, __FUNCTION__, stat);
return task_error(drive, rq, __func__, stat);
task_end_request(drive, rq, stat);
return ide_stopped;
}
......@@ -488,11 +489,11 @@ static ide_startstop_t task_out_intr (ide_drive_t *drive)
u8 stat = ide_read_status(drive);
if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat))
return task_error(drive, rq, __FUNCTION__, stat);
return task_error(drive, rq, __func__, stat);
/* Deal with unexpected ATA data phase. */
if (((stat & DRQ_STAT) == 0) ^ !hwif->nleft)
return task_error(drive, rq, __FUNCTION__, stat);
return task_error(drive, rq, __func__, stat);
if (!hwif->nleft) {
task_end_request(drive, rq, stat);
......@@ -675,7 +676,7 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
/* (hs): give up if multcount is not set */
printk(KERN_ERR "%s: %s Multimode Write " \
"multcount is not set\n",
drive->name, __FUNCTION__);
drive->name, __func__);
err = -EPERM;
goto abort;
}
......@@ -692,7 +693,7 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
/* (hs): give up if multcount is not set */
printk(KERN_ERR "%s: %s Multimode Read failure " \
"multcount is not set\n",
drive->name, __FUNCTION__);
drive->name, __func__);
err = -EPERM;
goto abort;
}
......
drivers/ide/ide.c
View file @ a52b0d25
......@@ -227,79 +227,6 @@ static int ide_system_bus_speed(void)
return pci_dev_present(pci_default) ? 33 : 50;
}
static struct resource* hwif_request_region(ide_hwif_t *hwif,
unsigned long addr, int num)
{
struct resource *res = request_region(addr, num, hwif->name);
if (!res)
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
hwif->name, addr, addr+num-1);
return res;
}
/**
* ide_hwif_request_regions - request resources for IDE
* @hwif: interface to use
*
* Requests all the needed resources for an interface.
* Right now core IDE code does this work which is deeply wrong.
* MMIO leaves it to the controller driver,
* PIO will migrate this way over time.
*/
int ide_hwif_request_regions(ide_hwif_t *hwif)
{
unsigned long addr;
if (hwif->mmio)
return 0;
addr = hwif->io_ports[IDE_CONTROL_OFFSET];
if (addr && !hwif_request_region(hwif, addr, 1))
goto control_region_busy;
addr = hwif->io_ports[IDE_DATA_OFFSET];
BUG_ON((addr | 7) != hwif->io_ports[IDE_STATUS_OFFSET]);
if (!hwif_request_region(hwif, addr, 8))
goto data_region_busy;
return 0;
data_region_busy:
addr = hwif->io_ports[IDE_CONTROL_OFFSET];
if (addr)
release_region(addr, 1);
control_region_busy:
/* If any errors are return, we drop the hwif interface. */
return -EBUSY;
}
/**
* ide_hwif_release_regions - free IDE resources
*
* Note that we only release the standard ports,
* and do not even try to handle any extra ports
* allocated for weird IDE interface chipsets.
*
* Note also that we don't yet handle mmio resources here. More
* importantly our caller should be doing this so we need to
* restructure this as a helper function for drivers.
*/
void ide_hwif_release_regions(ide_hwif_t *hwif)
{
if (hwif->mmio)
return;
if (hwif->io_ports[IDE_CONTROL_OFFSET])
release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1);
release_region(hwif->io_ports[IDE_DATA_OFFSET], 8);
}
void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
{
ide_hwgroup_t *hwgroup = hwif->hwgroup;
......@@ -436,9 +363,7 @@ void ide_unregister(unsigned int index)
spin_lock_irq(&ide_lock);
if (hwif->dma_base)
(void)ide_release_dma(hwif);
ide_hwif_release_regions(hwif);
ide_release_dma_engine(hwif);
/* restore hwif data to pristine status */
ide_init_port_data(hwif, index);
......@@ -454,7 +379,6 @@ void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
{
memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports));
hwif->irq = hw->irq;
hwif->noprobe = 0;
hwif->chipset = hw->chipset;
hwif->gendev.parent = hw->dev;
hwif->ack_intr = hw->ack_intr;
......@@ -545,7 +469,7 @@ int set_using_dma(ide_drive_t *drive, int arg)
if (!drive->id || !(drive->id->capability & 1))
goto out;
if (hwif->dma_host_set == NULL)
if (hwif->dma_ops == NULL)
goto out;
err = -EBUSY;
......@@ -585,11 +509,12 @@ int set_pio_mode(ide_drive_t *drive, int arg)
{
struct request rq;
ide_hwif_t *hwif = drive->hwif;
const struct ide_port_ops *port_ops = hwif->port_ops;
if (arg < 0 || arg > 255)
return -EINVAL;
if (hwif->set_pio_mode == NULL ||
if (port_ops == NULL || port_ops->set_pio_mode == NULL ||
(hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
return -ENOSYS;
......@@ -1005,14 +930,12 @@ static int __init ide_setup(char *s)
goto done;
case -3: /* "nowerr" */
drive->bad_wstat = BAD_R_STAT;
hwif->noprobe = 0;
goto done;
case -4: /* "cdrom" */
drive->present = 1;
drive->media = ide_cdrom;
/* an ATAPI device ignores DRDY */
drive->ready_stat = 0;
hwif->noprobe = 0;
goto done;
case -5: /* nodma */
drive->nodma = 1;
......@@ -1043,7 +966,6 @@ static int __init ide_setup(char *s)
drive->sect = drive->bios_sect = vals[2];
drive->present = 1;
drive->forced_geom = 1;
hwif->noprobe = 0;
goto done;
default:
goto bad_option;
......
drivers/ide/legacy/ali14xx.c
View file @ a52b0d25
......@@ -49,6 +49,8 @@
#include <asm/io.h>
#define DRV_NAME "ali14xx"
/* port addresses for auto-detection */
#define ALI_NUM_PORTS 4
static const int ports[ALI_NUM_PORTS] __initdata =
......@@ -192,18 +194,20 @@ static int __init initRegisters(void)
return t;
}
static const struct ide_port_ops ali14xx_port_ops = {
.set_pio_mode = ali14xx_set_pio_mode,
};
static const struct ide_port_info ali14xx_port_info = {
.name = DRV_NAME,
.chipset = ide_ali14xx,
.port_ops = &ali14xx_port_ops,
.host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE,
.pio_mask = ATA_PIO4,
};
static int __init ali14xx_probe(void)
{
ide_hwif_t *hwif, *mate;
static u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
hw_regs_t hw[2];
printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n",
basePort, regOn);
......@@ -213,31 +217,7 @@ static int __init ali14xx_probe(void)
return 1;
}
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
hw[0].irq = 14;
ide_std_init_ports(&hw[1], 0x170, 0x376);
hw[1].irq = 15;
hwif = ide_find_port();
if (hwif) {
ide_init_port_hw(hwif, &hw[0]);
hwif->set_pio_mode = &ali14xx_set_pio_mode;
idx[0] = hwif->index;
}
mate = ide_find_port();
if (mate) {
ide_init_port_hw(mate, &hw[1]);
mate->set_pio_mode = &ali14xx_set_pio_mode;
idx[1] = mate->index;
}
ide_device_add(idx, &ali14xx_port_info);
return 0;
return ide_legacy_device_add(&ali14xx_port_info, 0);
}
int probe_ali14xx;
......
drivers/ide/legacy/buddha.c
View file @ a52b0d25
......@@ -228,8 +228,6 @@ static int __init buddha_init(void)
ide_init_port_data(hwif, index);
ide_init_port_hw(hwif, &hw);
hwif->mmio = 1;
idx[i] = index;
}
}
......
drivers/ide/legacy/dtc2278.c
View file @ a52b0d25
......@@ -16,6 +16,8 @@
#include <asm/io.h>
#define DRV_NAME "dtc2278"
/*
* Changing this #undef to #define may solve start up problems in some systems.
*/
......@@ -86,8 +88,14 @@ static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio)
}
}
static const struct ide_port_ops dtc2278_port_ops = {
.set_pio_mode = dtc2278_set_pio_mode,
};
static const struct ide_port_info dtc2278_port_info __initdata = {
.name = DRV_NAME,
.chipset = ide_dtc2278,
.port_ops = &dtc2278_port_ops,
.host_flags = IDE_HFLAG_SERIALIZE |
IDE_HFLAG_NO_UNMASK_IRQS |
IDE_HFLAG_IO_32BIT |
......@@ -101,9 +109,6 @@ static const struct ide_port_info dtc2278_port_info __initdata = {
static int __init dtc2278_probe(void)
{
unsigned long flags;
ide_hwif_t *hwif, *mate;
static u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
hw_regs_t hw[2];
local_irq_save(flags);
/*
......@@ -123,30 +128,7 @@ static int __init dtc2278_probe(void)
#endif
local_irq_restore(flags);
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
hw[0].irq = 14;
ide_std_init_ports(&hw[1], 0x170, 0x376);
hw[1].irq = 15;
hwif = ide_find_port();
if (hwif) {
ide_init_port_hw(hwif, &hw[0]);
hwif->set_pio_mode = dtc2278_set_pio_mode;
idx[0] = hwif->index;
}
mate = ide_find_port();
if (mate) {
ide_init_port_hw(mate, &hw[1]);
idx[1] = mate->index;
}
ide_device_add(idx, &dtc2278_port_info);
return 0;
return ide_legacy_device_add(&dtc2278_port_info, 0);
}
int probe_dtc2278 = 0;
......
drivers/ide/legacy/falconide.c
View file @ a52b0d25
......@@ -89,7 +89,6 @@ static int __init falconide_init(void)
ide_init_port_data(hwif, index);
ide_init_port_hw(hwif, &hw);
hwif->mmio = 1;
ide_get_lock(NULL, NULL);
ide_device_add(idx, NULL);
......
drivers/ide/legacy/gayle.c
View file @ a52b0d25
......@@ -182,8 +182,6 @@ static int __init gayle_init(void)
ide_init_port_data(hwif, index);
ide_init_port_hw(hwif, &hw);
hwif->mmio = 1;
idx[i] = index;
} else
release_mem_region(res_start, res_n);
......
drivers/ide/legacy/ht6560b.c
View file @ a52b0d25
......@@ -328,8 +328,16 @@ int probe_ht6560b = 0;
module_param_named(probe, probe_ht6560b, bool, 0);
MODULE_PARM_DESC(probe, "probe for HT6560B chipset");
static const struct ide_port_ops ht6560b_port_ops = {
.port_init_devs = ht6560b_port_init_devs,
.set_pio_mode = ht6560b_set_pio_mode,
.selectproc = ht6560b_selectproc,
};
static const struct ide_port_info ht6560b_port_info __initdata = {
.name = DRV_NAME,
.chipset = ide_ht6560b,
.port_ops = &ht6560b_port_ops,
.host_flags = IDE_HFLAG_SERIALIZE | /* is this needed? */
IDE_HFLAG_NO_DMA |
IDE_HFLAG_NO_AUTOTUNE |
......@@ -339,53 +347,21 @@ static const struct ide_port_info ht6560b_port_info __initdata = {
static int __init ht6560b_init(void)
{
ide_hwif_t *hwif, *mate;
static u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
hw_regs_t hw[2];
if (probe_ht6560b == 0)
return -ENODEV;
if (!request_region(HT_CONFIG_PORT, 1, DRV_NAME)) {
printk(KERN_NOTICE "%s: HT_CONFIG_PORT not found\n",
__FUNCTION__);
__func__);
return -ENODEV;
}
if (!try_to_init_ht6560b()) {
printk(KERN_NOTICE "%s: HBA not found\n", __FUNCTION__);
printk(KERN_NOTICE "%s: HBA not found\n", __func__);
goto release_region;
}
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
hw[0].irq = 14;
ide_std_init_ports(&hw[1], 0x170, 0x376);
hw[1].irq = 15;
hwif = ide_find_port();
if (hwif) {
ide_init_port_hw(hwif, &hw[0]);
hwif->selectproc = ht6560b_selectproc;
hwif->set_pio_mode = ht6560b_set_pio_mode;
hwif->port_init_devs = ht6560b_port_init_devs;
idx[0] = hwif->index;
}
mate = ide_find_port();
if (mate) {
ide_init_port_hw(mate, &hw[1]);
mate->selectproc = ht6560b_selectproc;
mate->set_pio_mode = ht6560b_set_pio_mode;
mate->port_init_devs = ht6560b_port_init_devs;
idx[1] = mate->index;
}
ide_device_add(idx, &ht6560b_port_info);
return 0;
return ide_legacy_device_add(&ht6560b_port_info, 0);
release_region:
release_region(HT_CONFIG_PORT, 1);
......
drivers/ide/legacy/ide-4drives.c
View file @ a52b0d25
......@@ -4,6 +4,8 @@
#include <linux/module.h>
#include <linux/ide.h>
#define DRV_NAME "ide-4drives"
int probe_4drives;
module_param_named(probe, probe_4drives, bool, 0);
......@@ -12,15 +14,29 @@ MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port");
static int __init ide_4drives_init(void)
{
ide_hwif_t *hwif, *mate;
unsigned long base = 0x1f0, ctl = 0x3f6;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
hw_regs_t hw;
if (probe_4drives == 0)
return -ENODEV;
if (!request_region(base, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
DRV_NAME, base, base + 7);
return -EBUSY;
}
if (!request_region(ctl, 1, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
DRV_NAME, ctl);
release_region(base, 8);
return -EBUSY;
}
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, 0x1f0, 0x3f6);
ide_std_init_ports(&hw, base, ctl);
hw.irq = 14;
hw.chipset = ide_4drives;
......
drivers/ide/legacy/ide-cs.c
View file @ a52b0d25
......@@ -51,6 +51,8 @@
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
#define DRV_NAME "ide-cs"
/*====================================================================*/
/* Module parameters */
......@@ -72,16 +74,11 @@ static char *version =
/*====================================================================*/
static const char ide_major[] = {
IDE0_MAJOR, IDE1_MAJOR, IDE2_MAJOR, IDE3_MAJOR,
IDE4_MAJOR, IDE5_MAJOR
};
typedef struct ide_info_t {
struct pcmcia_device *p_dev;
ide_hwif_t *hwif;
int ndev;
dev_node_t node;
int hd;
} ide_info_t;
static void ide_release(struct pcmcia_device *);
......@@ -136,20 +133,44 @@ static int ide_probe(struct pcmcia_device *link)
static void ide_detach(struct pcmcia_device *link)
{
ide_info_t *info = link->priv;
ide_hwif_t *hwif = info->hwif;
DEBUG(0, "ide_detach(0x%p)\n", link);
ide_release(link);
kfree(link->priv);
release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1);
release_region(hwif->io_ports[IDE_DATA_OFFSET], 8);
kfree(info);
} /* ide_detach */
static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
static const struct ide_port_ops idecs_port_ops = {
.quirkproc = ide_undecoded_slave,
};
static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl,
unsigned long irq, struct pcmcia_device *handle)
{
ide_hwif_t *hwif;
hw_regs_t hw;
int i;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
if (!request_region(io, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
DRV_NAME, io, io + 7);
return NULL;
}
if (!request_region(ctl, 1, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
DRV_NAME, ctl);
release_region(io, 8);
return NULL;
}
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, io, ctl);
hw.irq = irq;
......@@ -158,7 +179,7 @@ static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq
hwif = ide_find_port();
if (hwif == NULL)
return -1;
goto out_release;
i = hwif->index;
......@@ -168,13 +189,19 @@ static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq
ide_init_port_data(hwif, i);
ide_init_port_hw(hwif, &hw);
hwif->quirkproc = &ide_undecoded_slave;
hwif->port_ops = &idecs_port_ops;
idx[0] = i;
ide_device_add(idx, NULL);
return hwif->present ? i : -1;
if (hwif->present)
return hwif;
out_release:
release_region(ctl, 1);
release_region(io, 8);
return NULL;
}
/*======================================================================
......@@ -199,8 +226,9 @@ static int ide_config(struct pcmcia_device *link)
cistpl_cftable_entry_t dflt;
} *stk = NULL;
cistpl_cftable_entry_t *cfg;
int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0;
int i, pass, last_ret = 0, last_fn = 0, is_kme = 0;
unsigned long io_base, ctl_base;
ide_hwif_t *hwif;
DEBUG(0, "ide_config(0x%p)\n", link);
......@@ -296,14 +324,15 @@ static int ide_config(struct pcmcia_device *link)
outb(0x81, ctl_base+1);
/* retry registration in case device is still spinning up */
for (hd = -1, i = 0; i < 10; i++) {
hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
if (hd >= 0) break;
for (i = 0; i < 10; i++) {
hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
if (hwif)
break;
if (link->io.NumPorts1 == 0x20) {
outb(0x02, ctl_base + 0x10);
hd = idecs_register(io_base + 0x10, ctl_base + 0x10,
link->irq.AssignedIRQ, link);
if (hd >= 0) {
hwif = idecs_register(io_base + 0x10, ctl_base + 0x10,
link->irq.AssignedIRQ, link);
if (hwif) {
io_base += 0x10;
ctl_base += 0x10;
break;
......@@ -312,7 +341,7 @@ static int ide_config(struct pcmcia_device *link)
msleep(100);
}
if (hd < 0) {
if (hwif == NULL) {
printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx"
", irq %u failed\n", io_base, ctl_base,
link->irq.AssignedIRQ);
......@@ -320,10 +349,10 @@ static int ide_config(struct pcmcia_device *link)
}
info->ndev = 1;
sprintf(info->node.dev_name, "hd%c", 'a' + (hd * 2));
info->node.major = ide_major[hd];
sprintf(info->node.dev_name, "hd%c", 'a' + hwif->index * 2);
info->node.major = hwif->major;
info->node.minor = 0;
info->hd = hd;
info->hwif = hwif;
link->dev_node = &info->node;
printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n",
info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10);
......@@ -354,13 +383,14 @@ static int ide_config(struct pcmcia_device *link)
void ide_release(struct pcmcia_device *link)
{
ide_info_t *info = link->priv;
ide_hwif_t *hwif = info->hwif;
DEBUG(0, "ide_release(0x%p)\n", link);
if (info->ndev) {
/* FIXME: if this fails we need to queue the cleanup somehow
-- need to investigate the required PCMCIA magic */
ide_unregister(info->hd);
ide_unregister(hwif->index);
}
info->ndev = 0;
......
drivers/ide/legacy/ide_platform.c
View file @ a52b0d25
......@@ -100,7 +100,6 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
hw.dev = &pdev->dev;
ide_init_port_hw(hwif, &hw);
hwif->mmio = 1;
if (mmio)
default_hwif_mmiops(hwif);
......
drivers/ide/legacy/macide.c
View file @ a52b0d25
......@@ -128,8 +128,6 @@ static int __init macide_init(void)
ide_init_port_data(hwif, index);
ide_init_port_hw(hwif, &hw);
hwif->mmio = 1;
ide_device_add(idx, NULL);
}
......
drivers/ide/legacy/q40ide.c
View file @ a52b0d25
......@@ -141,7 +141,6 @@ static int __init q40ide_init(void)
if (hwif) {
ide_init_port_data(hwif, hwif->index);
ide_init_port_hw(hwif, &hw);
hwif->mmio = 1;
idx[i] = hwif->index;
}
......
drivers/ide/legacy/qd65xx.c
View file @ a52b0d25
......@@ -37,6 +37,8 @@
#include <asm/system.h>
#include <asm/io.h>
#define DRV_NAME "qd65xx"
#include "qd65xx.h"
/*
......@@ -304,7 +306,20 @@ static void __init qd6580_port_init_devs(ide_hwif_t *hwif)
hwif->drives[1].drive_data = t2;
}
static const struct ide_port_ops qd6500_port_ops = {
.port_init_devs = qd6500_port_init_devs,
.set_pio_mode = qd6500_set_pio_mode,
.selectproc = qd65xx_select,
};
static const struct ide_port_ops qd6580_port_ops = {
.port_init_devs = qd6580_port_init_devs,
.set_pio_mode = qd6580_set_pio_mode,
.selectproc = qd65xx_select,
};
static const struct ide_port_info qd65xx_port_info __initdata = {
.name = DRV_NAME,
.chipset = ide_qd65xx,
.host_flags = IDE_HFLAG_IO_32BIT |
IDE_HFLAG_NO_DMA |
......@@ -321,10 +336,8 @@ static const struct ide_port_info qd65xx_port_info __initdata = {
static int __init qd_probe(int base)
{
ide_hwif_t *hwif;
u8 config, unit;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
hw_regs_t hw[2];
int rc;
u8 config, unit, control;
struct ide_port_info d = qd65xx_port_info;
config = inb(QD_CONFIG_PORT);
......@@ -337,21 +350,11 @@ static int __init qd_probe(int base)
if (unit)
d.host_flags |= IDE_HFLAG_QD_2ND_PORT;
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
hw[0].irq = 14;
ide_std_init_ports(&hw[1], 0x170, 0x376);
hw[1].irq = 15;
if ((config & 0xf0) == QD_CONFIG_QD6500) {
switch (config & 0xf0) {
case QD_CONFIG_QD6500:
if (qd_testreg(base))
return -ENODEV; /* bad register */
/* qd6500 found */
if (config & QD_CONFIG_DISABLED) {
printk(KERN_WARNING "qd6500 is disabled !\n");
return -ENODEV;
......@@ -361,37 +364,14 @@ static int __init qd_probe(int base)
printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n",
config, QD_ID3);
d.port_ops = &qd6500_port_ops;
d.host_flags |= IDE_HFLAG_SINGLE;
hwif = ide_find_port_slot(&d);
if (hwif == NULL)
return -ENOENT;
ide_init_port_hw(hwif, &hw[unit]);
hwif->config_data = (base << 8) | config;
hwif->port_init_devs = qd6500_port_init_devs;
hwif->set_pio_mode = qd6500_set_pio_mode;
hwif->selectproc = qd65xx_select;
idx[unit] = hwif->index;
ide_device_add(idx, &d);
return 1;
}
if (((config & 0xf0) == QD_CONFIG_QD6580_A) ||
((config & 0xf0) == QD_CONFIG_QD6580_B)) {
u8 control;
break;
case QD_CONFIG_QD6580_A:
case QD_CONFIG_QD6580_B:
if (qd_testreg(base) || qd_testreg(base + 0x02))
return -ENODEV; /* bad registers */
/* qd6580 found */
control = inb(QD_CONTROL_PORT);
printk(KERN_NOTICE "qd6580 at %#x\n", base);
......@@ -400,63 +380,23 @@ static int __init qd_probe(int base)
outb(QD_DEF_CONTR, QD_CONTROL_PORT);
if (control & QD_CONTR_SEC_DISABLED) {
/* secondary disabled */
printk(KERN_INFO "qd6580: single IDE board\n");
d.port_ops = &qd6580_port_ops;
if (control & QD_CONTR_SEC_DISABLED)
d.host_flags |= IDE_HFLAG_SINGLE;
hwif = ide_find_port_slot(&d);
if (hwif == NULL)
return -ENOENT;
ide_init_port_hw(hwif, &hw[unit]);
hwif->config_data = (base << 8) | config;
hwif->port_init_devs = qd6580_port_init_devs;
hwif->set_pio_mode = qd6580_set_pio_mode;
hwif->selectproc = qd65xx_select;
printk(KERN_INFO "qd6580: %s IDE board\n",
(control & QD_CONTR_SEC_DISABLED) ? "single" : "dual");
break;
default:
return -ENODEV;
}
idx[unit] = hwif->index;
rc = ide_legacy_device_add(&d, (base << 8) | config);
ide_device_add(idx, &d);
if (d.host_flags & IDE_HFLAG_SINGLE)
return (rc == 0) ? 1 : rc;
return 1;
} else {
ide_hwif_t *mate;
/* secondary enabled */
printk(KERN_INFO "qd6580: dual IDE board\n");
hwif = ide_find_port();
if (hwif) {
ide_init_port_hw(hwif, &hw[0]);
hwif->config_data = (base << 8) | config;
hwif->port_init_devs = qd6580_port_init_devs;
hwif->set_pio_mode = qd6580_set_pio_mode;
hwif->selectproc = qd65xx_select;
idx[0] = hwif->index;
}
mate = ide_find_port();
if (mate) {
ide_init_port_hw(mate, &hw[1]);
mate->config_data = (base << 8) | config;
mate->port_init_devs = qd6580_port_init_devs;
mate->set_pio_mode = qd6580_set_pio_mode;
mate->selectproc = qd65xx_select;
idx[1] = mate->index;
}
ide_device_add(idx, &qd65xx_port_info);
return 0; /* no other qd65xx possible */
}
}
/* no qd65xx found */
return -ENODEV;
return rc;
}
int probe_qd65xx = 0;
......
drivers/ide/legacy/umc8672.c
View file @ a52b0d25
......@@ -51,6 +51,8 @@
#include <asm/io.h>
#define DRV_NAME "umc8672"
/*
* Default speeds. These can be changed with "auto-tune" and/or hdparm.
*/
......@@ -120,18 +122,21 @@ static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio)
spin_unlock_irqrestore(&ide_lock, flags);
}
static const struct ide_port_ops umc8672_port_ops = {
.set_pio_mode = umc_set_pio_mode,
};
static const struct ide_port_info umc8672_port_info __initdata = {
.name = DRV_NAME,
.chipset = ide_umc8672,
.port_ops = &umc8672_port_ops,
.host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE,
.pio_mask = ATA_PIO4,
};
static int __init umc8672_probe(void)
{
ide_hwif_t *hwif, *mate;
unsigned long flags;
static u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
hw_regs_t hw[2];
if (!request_region(0x108, 2, "umc8672")) {
printk(KERN_ERR "umc8672: ports 0x108-0x109 already in use.\n");
......@@ -150,31 +155,7 @@ static int __init umc8672_probe(void)
umc_set_speeds(current_speeds);
local_irq_restore(flags);
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
hw[0].irq = 14;
ide_std_init_ports(&hw[1], 0x170, 0x376);
hw[1].irq = 15;
hwif = ide_find_port();
if (hwif) {
ide_init_port_hw(hwif, &hw[0]);
hwif->set_pio_mode = umc_set_pio_mode;
idx[0] = hwif->index;
}
mate = ide_find_port();
if (mate) {
ide_init_port_hw(mate, &hw[1]);
mate->set_pio_mode = umc_set_pio_mode;
idx[1] = mate->index;
}
ide_device_add(idx, &umc8672_port_info);
return 0;
return ide_legacy_device_add(&umc8672_port_info, 0);
}
int probe_umc8672;
......
drivers/ide/mips/au1xxx-ide.c
View file @ a52b0d25
......@@ -47,7 +47,6 @@
#define IDE_AU1XXX_BURSTMODE 1
static _auide_hwif auide_hwif;
static int dbdma_init_done;
static int auide_ddma_init(_auide_hwif *auide);
......@@ -61,7 +60,7 @@ void auide_insw(unsigned long port, void *addr, u32 count)
if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1,
DDMA_FLAGS_NOIE)) {
printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
printk(KERN_ERR "%s failed %d\n", __func__, __LINE__);
return;
}
ctp = *((chan_tab_t **)ahwif->rx_chan);
......@@ -79,7 +78,7 @@ void auide_outsw(unsigned long port, void *addr, u32 count)
if(!put_source_flags(ahwif->tx_chan, (void*)addr,
count << 1, DDMA_FLAGS_NOIE)) {
printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
printk(KERN_ERR "%s failed %d\n", __func__, __LINE__);
return;
}
ctp = *((chan_tab_t **)ahwif->tx_chan);
......@@ -250,7 +249,7 @@ static int auide_build_dmatable(ide_drive_t *drive)
(void*) sg_virt(sg),
tc, flags)) {
printk(KERN_ERR "%s failed %d\n",
__FUNCTION__, __LINE__);
__func__, __LINE__);
}
} else
{
......@@ -258,7 +257,7 @@ static int auide_build_dmatable(ide_drive_t *drive)
(void*) sg_virt(sg),
tc, flags)) {
printk(KERN_ERR "%s failed %d\n",
__FUNCTION__, __LINE__);
__func__, __LINE__);
}
}
......@@ -315,35 +314,6 @@ static int auide_dma_setup(ide_drive_t *drive)
return 0;
}
static u8 auide_mdma_filter(ide_drive_t *drive)
{
/*
* FIXME: ->white_list and ->black_list are based on completely bogus
* ->ide_dma_check implementation which didn't set neither the host
* controller timings nor the device for the desired transfer mode.
*
* They should be either removed or 0x00 MWDMA mask should be
* returned for devices on the ->black_list.
*/
if (dbdma_init_done == 0) {
auide_hwif.white_list = ide_in_drive_list(drive->id,
dma_white_list);
auide_hwif.black_list = ide_in_drive_list(drive->id,
dma_black_list);
auide_hwif.drive = drive;
auide_ddma_init(&auide_hwif);
dbdma_init_done = 1;
}
/* Is the drive in our DMA black list? */
if (auide_hwif.black_list)
printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n",
drive->name, drive->id->model);
return drive->hwif->mwdma_mask;
}
static int auide_dma_test_irq(ide_drive_t *drive)
{
if (drive->waiting_for_dma == 0)
......@@ -396,41 +366,41 @@ static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 de
dev->dev_devwidth = devwidth;
dev->dev_flags = flags;
}
#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
static void auide_dma_timeout(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
if (hwif->ide_dma_test_irq(drive))
if (auide_dma_test_irq(drive))
return;
hwif->ide_dma_end(drive);
auide_dma_end(drive);
}
static int auide_ddma_init(_auide_hwif *auide) {
static const struct ide_dma_ops au1xxx_dma_ops = {
.dma_host_set = auide_dma_host_set,
.dma_setup = auide_dma_setup,
.dma_exec_cmd = auide_dma_exec_cmd,
.dma_start = auide_dma_start,
.dma_end = auide_dma_end,
.dma_test_irq = auide_dma_test_irq,
.dma_lost_irq = auide_dma_lost_irq,
.dma_timeout = auide_dma_timeout,
};
static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
{
_auide_hwif *auide = (_auide_hwif *)hwif->hwif_data;
dbdev_tab_t source_dev_tab, target_dev_tab;
u32 dev_id, tsize, devwidth, flags;
ide_hwif_t *hwif = auide->hwif;
dev_id = AU1XXX_ATA_DDMA_REQ;
if (auide->white_list || auide->black_list) {
tsize = 8;
devwidth = 32;
}
else {
tsize = 1;
devwidth = 16;
printk(KERN_ERR "au1xxx-ide: %s is not on ide driver whitelist.\n",auide_hwif.drive->id->model);
printk(KERN_ERR " please read 'Documentation/mips/AU1xxx_IDE.README'");
}
tsize = 8; /* 1 */
devwidth = 32; /* 16 */
#ifdef IDE_AU1XXX_BURSTMODE
flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
......@@ -482,9 +452,9 @@ static int auide_ddma_init(_auide_hwif *auide) {
return 0;
}
#else
static int auide_ddma_init( _auide_hwif *auide )
static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
{
_auide_hwif *auide = (_auide_hwif *)hwif->hwif_data;
dbdev_tab_t source_dev_tab;
int flags;
......@@ -543,9 +513,18 @@ static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
*ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET);
}
static const struct ide_port_ops au1xxx_port_ops = {
.set_pio_mode = au1xxx_set_pio_mode,
.set_dma_mode = auide_set_dma_mode,
};
static const struct ide_port_info au1xxx_port_info = {
.init_dma = auide_ddma_init,
.port_ops = &au1xxx_port_ops,
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
.dma_ops = &au1xxx_dma_ops,
#endif
.host_flags = IDE_HFLAG_POST_SET_MODE |
IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
IDE_HFLAG_NO_IO_32BIT |
IDE_HFLAG_UNMASK_IRQS,
.pio_mask = ATA_PIO4,
......@@ -615,8 +594,6 @@ static int au_ide_probe(struct device *dev)
hwif->dev = dev;
hwif->mmio = 1;
/* If the user has selected DDMA assisted copies,
then set up a few local I/O function entry points
*/
......@@ -625,34 +602,12 @@ static int au_ide_probe(struct device *dev)
hwif->INSW = auide_insw;
hwif->OUTSW = auide_outsw;
#endif
hwif->set_pio_mode = &au1xxx_set_pio_mode;
hwif->set_dma_mode = &auide_set_dma_mode;
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
hwif->dma_timeout = &auide_dma_timeout;
hwif->mdma_filter = &auide_mdma_filter;
hwif->dma_host_set = &auide_dma_host_set;
hwif->dma_exec_cmd = &auide_dma_exec_cmd;
hwif->dma_start = &auide_dma_start;
hwif->ide_dma_end = &auide_dma_end;
hwif->dma_setup = &auide_dma_setup;
hwif->ide_dma_test_irq = &auide_dma_test_irq;
hwif->dma_lost_irq = &auide_dma_lost_irq;
#endif
hwif->select_data = 0; /* no chipset-specific code */
hwif->config_data = 0; /* no chipset-specific code */
auide_hwif.hwif = hwif;
hwif->hwif_data = &auide_hwif;
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
auide_ddma_init(&auide_hwif);
dbdma_init_done = 1;
#endif
idx[0] = hwif->index;
ide_device_add(idx, &au1xxx_port_info);
......
drivers/ide/mips/swarm.c
View file @ a52b0d25
......@@ -110,10 +110,8 @@ static int __devinit swarm_ide_probe(struct device *dev)
/* Setup MMIO ops. */
default_hwif_mmiops(hwif);
/* Prevent resource map manipulation. */
hwif->mmio = 1;
hwif->chipset = ide_generic;
hwif->noprobe = 0;
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
hwif->io_ports[i] =
......
drivers/ide/pci/aec62xx.c
View file @ a52b0d25
......@@ -135,7 +135,7 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
drive->hwif->set_dma_mode(drive, pio + XFER_PIO_0);
drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0);
}
static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
......@@ -175,27 +175,23 @@ static u8 __devinit atp86x_cable_detect(ide_hwif_t *hwif)
return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
hwif->set_pio_mode = &aec_set_pio_mode;
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
hwif->set_dma_mode = &aec6210_set_mode;
else {
hwif->set_dma_mode = &aec6260_set_mode;
static const struct ide_port_ops atp850_port_ops = {
.set_pio_mode = aec_set_pio_mode,
.set_dma_mode = aec6210_set_mode,
};
hwif->cable_detect = atp86x_cable_detect;
}
}
static const struct ide_port_ops atp86x_port_ops = {
.set_pio_mode = aec_set_pio_mode,
.set_dma_mode = aec6260_set_mode,
.cable_detect = atp86x_cable_detect,
};
static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
{ /* 0 */
.name = "AEC6210",
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.port_ops = &atp850_port_ops,
.host_flags = IDE_HFLAG_SERIALIZE |
IDE_HFLAG_NO_ATAPI_DMA |
IDE_HFLAG_NO_DSC |
......@@ -207,7 +203,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
},{ /* 1 */
.name = "AEC6260",
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
.port_ops = &atp86x_port_ops,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA |
IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_OFF_BOARD,
......@@ -217,8 +213,8 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
},{ /* 2 */
.name = "AEC6260R",
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.port_ops = &atp86x_port_ops,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA |
IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_NON_BOOTABLE,
......@@ -228,7 +224,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
},{ /* 3 */
.name = "AEC6280",
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
.port_ops = &atp86x_port_ops,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA |
IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_OFF_BOARD,
......@@ -238,8 +234,8 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
},{ /* 4 */
.name = "AEC6280R",
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.port_ops = &atp86x_port_ops,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA |
IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_OFF_BOARD,
......
drivers/ide/pci/alim15x3.c
View file @ a52b0d25
......@@ -610,7 +610,7 @@ static int ali_cable_override(struct pci_dev *pdev)
}
/**
* ata66_ali15x3 - check for UDMA 66 support
* ali_cable_detect - cable detection
* @hwif: IDE interface
*
* This checks if the controller and the cable are capable
......@@ -620,7 +620,7 @@ static int ali_cable_override(struct pci_dev *pdev)
* FIXME: frobs bits that are not defined on newer ALi devicea
*/
static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif)
static u8 __devinit ali_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long flags;
......@@ -652,27 +652,7 @@ static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif)
return cbl;
}
/**
* init_hwif_common_ali15x3 - Set up ALI IDE hardware
* @hwif: IDE interface
*
* Initialize the IDE structure side of the ALi 15x3 driver.
*/
static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
{
hwif->set_pio_mode = &ali_set_pio_mode;
hwif->set_dma_mode = &ali_set_dma_mode;
hwif->udma_filter = &ali_udma_filter;
hwif->cable_detect = ata66_ali15x3;
if (hwif->dma_base == 0)
return;
hwif->dma_setup = &ali15x3_dma_setup;
}
#ifndef CONFIG_SPARC64
/**
* init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff
* @hwif: interface to configure
......@@ -722,34 +702,66 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
if(irq >= 0)
hwif->irq = irq;
}
init_hwif_common_ali15x3(hwif);
}
#endif
/**
* init_dma_ali15x3 - set up DMA on ALi15x3
* @hwif: IDE interface
* @dmabase: DMA interface base PCI address
* @d: IDE port info
*
* Set up the DMA functionality on the ALi 15x3. For the ALi
* controllers this is generic so we can let the generic code do
* the actual work.
* Set up the DMA functionality on the ALi 15x3.
*/
static void __devinit init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase)
static int __devinit init_dma_ali15x3(ide_hwif_t *hwif,
const struct ide_port_info *d)
{
if (m5229_revision < 0x20)
return;
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long base = ide_pci_dma_base(hwif, d);
if (base == 0 || ide_pci_set_master(dev, d->name) < 0)
return -1;
if (!hwif->channel)
outb(inb(dmabase + 2) & 0x60, dmabase + 2);
ide_setup_dma(hwif, dmabase);
outb(inb(base + 2) & 0x60, base + 2);
printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
hwif->name, base, base + 7);
if (ide_allocate_dma_engine(hwif))
return -1;
ide_setup_dma(hwif, base);
return 0;
}
static const struct ide_port_ops ali_port_ops = {
.set_pio_mode = ali_set_pio_mode,
.set_dma_mode = ali_set_dma_mode,
.udma_filter = ali_udma_filter,
.cable_detect = ali_cable_detect,
};
static const struct ide_dma_ops ali_dma_ops = {
.dma_host_set = ide_dma_host_set,
.dma_setup = ali15x3_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
.dma_end = __ide_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
};
static const struct ide_port_info ali15x3_chipset __devinitdata = {
.name = "ALI15X3",
.init_chipset = init_chipset_ali15x3,
#ifndef CONFIG_SPARC64
.init_hwif = init_hwif_ali15x3,
#endif
.init_dma = init_dma_ali15x3,
.port_ops = &ali_port_ops,
.pio_mask = ATA_PIO5,
.swdma_mask = ATA_SWDMA2,
.mwdma_mask = ATA_MWDMA2,
......@@ -792,14 +804,17 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
d.udma_mask = ATA_UDMA5;
else
d.udma_mask = ATA_UDMA6;
d.dma_ops = &ali_dma_ops;
} else {
d.host_flags |= IDE_HFLAG_NO_DMA;
d.mwdma_mask = d.swdma_mask = 0;
}
if (idx == 0)
d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
#if defined(CONFIG_SPARC64)
d.init_hwif = init_hwif_common_ali15x3;
#endif /* CONFIG_SPARC64 */
return ide_setup_pci_device(dev, &d);
}
......
drivers/ide/pci/amd74xx.c
View file @ a52b0d25
......@@ -210,13 +210,14 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
if (hwif->irq == 0) /* 0 is bogus but will do for now */
hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel);
hwif->set_pio_mode = &amd_set_pio_mode;
hwif->set_dma_mode = &amd_set_drive;
hwif->cable_detect = amd_cable_detect;
}
static const struct ide_port_ops amd_port_ops = {
.set_pio_mode = amd_set_pio_mode,
.set_dma_mode = amd_set_drive,
.cable_detect = amd_cable_detect,
};
#define IDE_HFLAGS_AMD \
(IDE_HFLAG_PIO_NO_BLACKLIST | \
IDE_HFLAG_ABUSE_SET_DMA_MODE | \
......@@ -230,6 +231,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
.init_chipset = init_chipset_amd74xx, \
.init_hwif = init_hwif_amd74xx, \
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
.port_ops = &amd_port_ops, \
.host_flags = IDE_HFLAGS_AMD, \
.pio_mask = ATA_PIO5, \
.swdma_mask = swdma, \
......@@ -243,6 +245,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
.init_chipset = init_chipset_amd74xx, \
.init_hwif = init_hwif_amd74xx, \
.enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \
.port_ops = &amd_port_ops, \
.host_flags = IDE_HFLAGS_AMD, \
.pio_mask = ATA_PIO5, \
.swdma_mask = ATA_SWDMA2, \
......
drivers/ide/pci/atiixp.c
View file @ a52b0d25
......@@ -130,35 +130,25 @@ static u8 __devinit atiixp_cable_detect(ide_hwif_t *hwif)
return ATA_CBL_PATA40;
}
/**
* init_hwif_atiixp - fill in the hwif for the ATIIXP
* @hwif: IDE interface
*
* Set up the ide_hwif_t for the ATIIXP interface according to the
* capabilities of the hardware.
*/
static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
{
hwif->set_pio_mode = &atiixp_set_pio_mode;
hwif->set_dma_mode = &atiixp_set_dma_mode;
hwif->cable_detect = atiixp_cable_detect;
}
static const struct ide_port_ops atiixp_port_ops = {
.set_pio_mode = atiixp_set_pio_mode,
.set_dma_mode = atiixp_set_dma_mode,
.cable_detect = atiixp_cable_detect,
};
static const struct ide_port_info atiixp_pci_info[] __devinitdata = {
{ /* 0 */
.name = "ATIIXP",
.init_hwif = init_hwif_atiixp,
.enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
.port_ops = &atiixp_port_ops,
.host_flags = IDE_HFLAG_LEGACY_IRQS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
},{ /* 1 */
.name = "SB600_PATA",
.init_hwif = init_hwif_atiixp,
.enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
.port_ops = &atiixp_port_ops,
.host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
......
drivers/ide/pci/cmd640.c
View file @ a52b0d25
......@@ -109,6 +109,8 @@
#include <asm/io.h>
#define DRV_NAME "cmd640"
/*
* This flag is set in ide.c by the parameter: ide0=cmd640_vlb
*/
......@@ -633,6 +635,9 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
display_clocks(index);
}
static const struct ide_port_ops cmd640_port_ops = {
.set_pio_mode = cmd640_set_pio_mode,
};
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
static int pci_conf1(void)
......@@ -678,10 +683,29 @@ static const struct ide_port_info cmd640_port_info __initdata = {
IDE_HFLAG_ABUSE_PREFETCH |
IDE_HFLAG_ABUSE_FAST_DEVSEL,
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
.port_ops = &cmd640_port_ops,
.pio_mask = ATA_PIO5,
#endif
};
static int cmd640x_init_one(unsigned long base, unsigned long ctl)
{
if (!request_region(base, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
DRV_NAME, base, base + 7);
return -EBUSY;
}
if (!request_region(ctl, 1, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
DRV_NAME, ctl);
release_region(base, 8);
return -EBUSY;
}
return 0;
}
/*
* Probe for a cmd640 chipset, and initialize it if found.
*/
......@@ -690,7 +714,7 @@ static int __init cmd640x_init(void)
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
int second_port_toggled = 0;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
int second_port_cmd640 = 0;
int second_port_cmd640 = 0, rc;
const char *bus_type, *port2;
unsigned int index;
u8 b, cfr;
......@@ -734,6 +758,17 @@ static int __init cmd640x_init(void)
return 0;
}
rc = cmd640x_init_one(0x1f0, 0x3f6);
if (rc)
return rc;
rc = cmd640x_init_one(0x170, 0x376);
if (rc) {
release_region(0x3f6, 1);
release_region(0x1f0, 8);
return rc;
}
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
......@@ -752,10 +787,6 @@ static int __init cmd640x_init(void)
*/
if (cmd_hwif0) {
ide_init_port_hw(cmd_hwif0, &hw[0]);
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
idx[0] = cmd_hwif0->index;
}
......@@ -808,10 +839,6 @@ static int __init cmd640x_init(void)
*/
if (second_port_cmd640 && cmd_hwif1) {
ide_init_port_hw(cmd_hwif1, &hw[1]);
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
idx[1] = cmd_hwif1->index;
}
printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n",
......
drivers/ide/pci/cmd64x.c
View file @ a52b0d25
......@@ -223,7 +223,7 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
(void) pci_write_config_byte(dev, pciU, regU);
}
static int cmd648_ide_dma_end (ide_drive_t *drive)
static int cmd648_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long base = hwif->dma_base - (hwif->channel * 8);
......@@ -239,7 +239,7 @@ static int cmd648_ide_dma_end (ide_drive_t *drive)
return err;
}
static int cmd64x_ide_dma_end (ide_drive_t *drive)
static int cmd64x_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
......@@ -256,7 +256,7 @@ static int cmd64x_ide_dma_end (ide_drive_t *drive)
return err;
}
static int cmd648_ide_dma_test_irq (ide_drive_t *drive)
static int cmd648_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long base = hwif->dma_base - (hwif->channel * 8);
......@@ -279,7 +279,7 @@ static int cmd648_ide_dma_test_irq (ide_drive_t *drive)
return 0;
}
static int cmd64x_ide_dma_test_irq (ide_drive_t *drive)
static int cmd64x_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
......@@ -310,7 +310,7 @@ static int cmd64x_ide_dma_test_irq (ide_drive_t *drive)
* event order for DMA transfers.
*/
static int cmd646_1_ide_dma_end (ide_drive_t *drive)
static int cmd646_1_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 dma_stat = 0, dma_cmd = 0;
......@@ -370,7 +370,7 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha
return 0;
}
static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif)
static u8 __devinit cmd64x_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01;
......@@ -385,60 +385,52 @@ static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif)
}
}
static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
hwif->set_pio_mode = &cmd64x_set_pio_mode;
hwif->set_dma_mode = &cmd64x_set_dma_mode;
hwif->cable_detect = ata66_cmd64x;
static const struct ide_port_ops cmd64x_port_ops = {
.set_pio_mode = cmd64x_set_pio_mode,
.set_dma_mode = cmd64x_set_dma_mode,
.cable_detect = cmd64x_cable_detect,
};
if (!hwif->dma_base)
return;
static const struct ide_dma_ops cmd64x_dma_ops = {
.dma_host_set = ide_dma_host_set,
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
.dma_end = cmd64x_dma_end,
.dma_test_irq = cmd64x_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
};
/*
* UltraDMA only supported on PCI646U and PCI646U2, which
* correspond to revisions 0x03, 0x05 and 0x07 respectively.
* Actually, although the CMD tech support people won't
* tell me the details, the 0x03 revision cannot support
* UDMA correctly without hardware modifications, and even
* then it only works with Quantum disks due to some
* hold time assumptions in the 646U part which are fixed
* in the 646U2.
*
* So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
*/
if (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 5)
hwif->ultra_mask = 0x00;
static const struct ide_dma_ops cmd646_rev1_dma_ops = {
.dma_host_set = ide_dma_host_set,
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
.dma_end = cmd646_1_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
};
switch (dev->device) {
case PCI_DEVICE_ID_CMD_648:
case PCI_DEVICE_ID_CMD_649:
alt_irq_bits:
hwif->ide_dma_end = &cmd648_ide_dma_end;
hwif->ide_dma_test_irq = &cmd648_ide_dma_test_irq;
break;
case PCI_DEVICE_ID_CMD_646:
if (dev->revision == 0x01) {
hwif->ide_dma_end = &cmd646_1_ide_dma_end;
break;
} else if (dev->revision >= 0x03)
goto alt_irq_bits;
/* fall thru */
default:
hwif->ide_dma_end = &cmd64x_ide_dma_end;
hwif->ide_dma_test_irq = &cmd64x_ide_dma_test_irq;
break;
}
}
static const struct ide_dma_ops cmd648_dma_ops = {
.dma_host_set = ide_dma_host_set,
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
.dma_end = cmd648_dma_end,
.dma_test_irq = cmd648_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
};
static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
{ /* 0 */
.name = "CMD643",
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
.enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
.port_ops = &cmd64x_port_ops,
.dma_ops = &cmd64x_dma_ops,
.host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
......@@ -447,9 +439,10 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
},{ /* 1 */
.name = "CMD646",
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.chipset = ide_cmd646,
.port_ops = &cmd64x_port_ops,
.dma_ops = &cmd648_dma_ops,
.host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
......@@ -457,8 +450,9 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
},{ /* 2 */
.name = "CMD648",
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.port_ops = &cmd64x_port_ops,
.dma_ops = &cmd648_dma_ops,
.host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
......@@ -466,8 +460,9 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
},{ /* 3 */
.name = "CMD649",
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.port_ops = &cmd64x_port_ops,
.dma_ops = &cmd648_dma_ops,
.host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
......@@ -482,12 +477,35 @@ static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_devic
d = cmd64x_chipsets[idx];
/*
* The original PCI0646 didn't have the primary channel enable bit,
* it appeared starting with PCI0646U (i.e. revision ID 3).
*/
if (idx == 1 && dev->revision < 3)
d.enablebits[0].reg = 0;
if (idx == 1) {
/*
* UltraDMA only supported on PCI646U and PCI646U2, which
* correspond to revisions 0x03, 0x05 and 0x07 respectively.
* Actually, although the CMD tech support people won't
* tell me the details, the 0x03 revision cannot support
* UDMA correctly without hardware modifications, and even
* then it only works with Quantum disks due to some
* hold time assumptions in the 646U part which are fixed
* in the 646U2.
*
* So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
*/
if (dev->revision < 5) {
d.udma_mask = 0x00;
/*
* The original PCI0646 didn't have the primary
* channel enable bit, it appeared starting with
* PCI0646U (i.e. revision ID 3).
*/
if (dev->revision < 3) {
d.enablebits[0].reg = 0;
if (dev->revision == 1)
d.dma_ops = &cmd646_rev1_dma_ops;
else
d.dma_ops = &cmd64x_dma_ops;
}
}
}
return ide_setup_pci_device(dev, &d);
}
......
drivers/ide/pci/cs5520.c
View file @ a52b0d25
......@@ -103,21 +103,27 @@ static void cs5520_dma_host_set(ide_drive_t *drive, int on)
ide_dma_host_set(drive, on);
}
static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
{
hwif->set_pio_mode = &cs5520_set_pio_mode;
hwif->set_dma_mode = &cs5520_set_dma_mode;
if (hwif->dma_base == 0)
return;
static const struct ide_port_ops cs5520_port_ops = {
.set_pio_mode = cs5520_set_pio_mode,
.set_dma_mode = cs5520_set_dma_mode,
};
hwif->dma_host_set = &cs5520_dma_host_set;
}
static const struct ide_dma_ops cs5520_dma_ops = {
.dma_host_set = cs5520_dma_host_set,
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
.dma_end = __ide_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
};
#define DECLARE_CS_DEV(name_str) \
{ \
.name = name_str, \
.init_hwif = init_hwif_cs5520, \
.port_ops = &cs5520_port_ops, \
.dma_ops = &cs5520_dma_ops, \
.host_flags = IDE_HFLAG_ISA_PORTS | \
IDE_HFLAG_CS5520 | \
IDE_HFLAG_VDMA | \
......
drivers/ide/pci/cs5530.c
View file @ a52b0d25
......@@ -228,26 +228,25 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
unsigned long basereg;
u32 d0_timings;
hwif->set_pio_mode = &cs5530_set_pio_mode;
hwif->set_dma_mode = &cs5530_set_dma_mode;
basereg = CS5530_BASEREG(hwif);
d0_timings = inl(basereg + 0);
if (CS5530_BAD_PIO(d0_timings))
outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0);
if (CS5530_BAD_PIO(inl(basereg + 8)))
outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8);
if (hwif->dma_base == 0)
return;
hwif->udma_filter = cs5530_udma_filter;
}
static const struct ide_port_ops cs5530_port_ops = {
.set_pio_mode = cs5530_set_pio_mode,
.set_dma_mode = cs5530_set_dma_mode,
.udma_filter = cs5530_udma_filter,
};
static const struct ide_port_info cs5530_chipset __devinitdata = {
.name = "CS5530",
.init_chipset = init_chipset_cs5530,
.init_hwif = init_hwif_cs5530,
.port_ops = &cs5530_port_ops,
.host_flags = IDE_HFLAG_SERIALIZE |
IDE_HFLAG_POST_SET_MODE,
.pio_mask = ATA_PIO4,
......
drivers/ide/pci/cs5535.c
View file @ a52b0d25
......@@ -166,25 +166,15 @@ static u8 __devinit cs5535_cable_detect(ide_hwif_t *hwif)
return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
}
/****
* init_hwif_cs5535 - Initialize one ide cannel
* @hwif: Channel descriptor
*
* This gets invoked by the IDE driver once for each channel. It
* performs channel-specific pre-initialization before drive probing.
*
*/
static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
{
hwif->set_pio_mode = &cs5535_set_pio_mode;
hwif->set_dma_mode = &cs5535_set_dma_mode;
hwif->cable_detect = cs5535_cable_detect;
}
static const struct ide_port_ops cs5535_port_ops = {
.set_pio_mode = cs5535_set_pio_mode,
.set_dma_mode = cs5535_set_dma_mode,
.cable_detect = cs5535_cable_detect,
};
static const struct ide_port_info cs5535_chipset __devinitdata = {
.name = "CS5535",
.init_hwif = init_hwif_cs5535,
.port_ops = &cs5535_port_ops,
.host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE |
IDE_HFLAG_ABUSE_SET_DMA_MODE,
.pio_mask = ATA_PIO4,
......
drivers/ide/pci/cy82c693.c
View file @ a52b0d25
......@@ -382,15 +382,6 @@ static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const c
return 0;
}
/*
* the init function - called for each ide channel once
*/
static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif)
{
hwif->set_pio_mode = &cy82c693_set_pio_mode;
hwif->set_dma_mode = &cy82c693_set_dma_mode;
}
static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
{
static ide_hwif_t *primary;
......@@ -404,11 +395,16 @@ static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
}
}
static const struct ide_port_ops cy82c693_port_ops = {
.set_pio_mode = cy82c693_set_pio_mode,
.set_dma_mode = cy82c693_set_dma_mode,
};
static const struct ide_port_info cy82c693_chipset __devinitdata = {
.name = "CY82C693",
.init_chipset = init_chipset_cy82c693,
.init_iops = init_iops_cy82c693,
.init_hwif = init_hwif_cy82c693,
.port_ops = &cy82c693_port_ops,
.chipset = ide_cy82c693,
.host_flags = IDE_HFLAG_SINGLE,
.pio_mask = ATA_PIO4,
......
drivers/ide/pci/delkin_cb.c
View file @ a52b0d25
......@@ -43,6 +43,10 @@ static const u8 setup[] = {
0x00, 0x00, 0x00, 0x00, 0xa4, 0x83, 0x02, 0x13,
};
static const struct ide_port_ops delkin_cb_port_ops = {
.quirkproc = ide_undecoded_slave,
};
static int __devinit
delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
{
......@@ -89,8 +93,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
ide_init_port_data(hwif, i);
ide_init_port_hw(hwif, &hw);
hwif->mmio = 1;
hwif->quirkproc = &ide_undecoded_slave;
hwif->port_ops = &delkin_cb_port_ops;
idx[0] = i;
......
drivers/ide/pci/hpt34x.c
View file @ a52b0d25
......@@ -115,11 +115,10 @@ static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev, const cha
return dev->irq;
}
static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif)
{
hwif->set_pio_mode = &hpt34x_set_pio_mode;
hwif->set_dma_mode = &hpt34x_set_mode;
}
static const struct ide_port_ops hpt34x_port_ops = {
.set_pio_mode = hpt34x_set_pio_mode,
.set_dma_mode = hpt34x_set_mode,
};
#define IDE_HFLAGS_HPT34X \
(IDE_HFLAG_NO_ATAPI_DMA | \
......@@ -131,16 +130,14 @@ static const struct ide_port_info hpt34x_chipsets[] __devinitdata = {
{ /* 0 */
.name = "HPT343",
.init_chipset = init_chipset_hpt34x,
.init_hwif = init_hwif_hpt34x,
.extra = 16,
.port_ops = &hpt34x_port_ops,
.host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_NON_BOOTABLE,
.pio_mask = ATA_PIO5,
},
{ /* 1 */
.name = "HPT345",
.init_chipset = init_chipset_hpt34x,
.init_hwif = init_hwif_hpt34x,
.extra = 16,
.port_ops = &hpt34x_port_ops,
.host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO5,
#ifdef CONFIG_HPT34X_AUTODMA
......
drivers/ide/pci/hpt366.c
View file @ a52b0d25
......@@ -776,7 +776,7 @@ static void hpt366_dma_lost_irq(ide_drive_t *drive)
pci_read_config_byte(dev, 0x52, &mcr3);
pci_read_config_byte(dev, 0x5a, &scr1);
printk("%s: (%s) mcr1=0x%02x, mcr3=0x%02x, scr1=0x%02x\n",
drive->name, __FUNCTION__, mcr1, mcr3, scr1);
drive->name, __func__, mcr1, mcr3, scr1);
if (scr1 & 0x10)
pci_write_config_byte(dev, 0x5a, scr1 & ~0x10);
ide_dma_lost_irq(drive);
......@@ -808,7 +808,7 @@ static void hpt370_irq_timeout(ide_drive_t *drive)
hpt370_clear_engine(drive);
}
static void hpt370_ide_dma_start(ide_drive_t *drive)
static void hpt370_dma_start(ide_drive_t *drive)
{
#ifdef HPT_RESET_STATE_ENGINE
hpt370_clear_engine(drive);
......@@ -816,7 +816,7 @@ static void hpt370_ide_dma_start(ide_drive_t *drive)
ide_dma_start(drive);
}
static int hpt370_ide_dma_end(ide_drive_t *drive)
static int hpt370_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 dma_stat = inb(hwif->dma_status);
......@@ -838,7 +838,7 @@ static void hpt370_dma_timeout(ide_drive_t *drive)
}
/* returns 1 if DMA IRQ issued, 0 otherwise */
static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
static int hpt374_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
......@@ -858,11 +858,11 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
if (!drive->waiting_for_dma)
printk(KERN_WARNING "%s: (%s) called while not waiting\n",
drive->name, __FUNCTION__);
drive->name, __func__);
return 0;
}
static int hpt374_ide_dma_end(ide_drive_t *drive)
static int hpt374_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
......@@ -1271,17 +1271,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
/* Cache the channel's MISC. control registers' offset */
hwif->select_data = hwif->channel ? 0x54 : 0x50;
hwif->set_pio_mode = &hpt3xx_set_pio_mode;
hwif->set_dma_mode = &hpt3xx_set_mode;
hwif->quirkproc = &hpt3xx_quirkproc;
hwif->maskproc = &hpt3xx_maskproc;
hwif->udma_filter = &hpt3xx_udma_filter;
hwif->mdma_filter = &hpt3xx_mdma_filter;
hwif->cable_detect = hpt3xx_cable_detect;
/*
* HPT3xxN chips have some complications:
*
......@@ -1323,29 +1312,19 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
if (new_mcr != old_mcr)
pci_write_config_byte(dev, hwif->select_data + 1, new_mcr);
if (hwif->dma_base == 0)
return;
if (chip_type >= HPT374) {
hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq;
hwif->ide_dma_end = &hpt374_ide_dma_end;
} else if (chip_type >= HPT370) {
hwif->dma_start = &hpt370_ide_dma_start;
hwif->ide_dma_end = &hpt370_ide_dma_end;
hwif->dma_timeout = &hpt370_dma_timeout;
} else
hwif->dma_lost_irq = &hpt366_dma_lost_irq;
}
static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
const struct ide_port_info *d)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 masterdma = 0, slavedma = 0;
u8 dma_new = 0, dma_old = 0;
unsigned long flags;
unsigned long flags, base = ide_pci_dma_base(hwif, d);
u8 dma_old, dma_new, masterdma = 0, slavedma = 0;
dma_old = inb(dmabase + 2);
if (base == 0 || ide_pci_set_master(dev, d->name) < 0)
return -1;
dma_old = inb(base + 2);
local_irq_save(flags);
......@@ -1356,11 +1335,21 @@ static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
if (masterdma & 0x30) dma_new |= 0x20;
if ( slavedma & 0x30) dma_new |= 0x40;
if (dma_new != dma_old)
outb(dma_new, dmabase + 2);
outb(dma_new, base + 2);
local_irq_restore(flags);
ide_setup_dma(hwif, dmabase);
printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
hwif->name, base, base + 7);
hwif->extra_base = base + (hwif->channel ? 8 : 16);
if (ide_allocate_dma_engine(hwif))
return -1;
ide_setup_dma(hwif, base);
return 0;
}
static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2)
......@@ -1416,6 +1405,49 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
IDE_HFLAG_ABUSE_SET_DMA_MODE | \
IDE_HFLAG_OFF_BOARD)
static const struct ide_port_ops hpt3xx_port_ops = {
.set_pio_mode = hpt3xx_set_pio_mode,
.set_dma_mode = hpt3xx_set_mode,
.quirkproc = hpt3xx_quirkproc,
.maskproc = hpt3xx_maskproc,
.mdma_filter = hpt3xx_mdma_filter,
.udma_filter = hpt3xx_udma_filter,
.cable_detect = hpt3xx_cable_detect,
};
static const struct ide_dma_ops hpt37x_dma_ops = {
.dma_host_set = ide_dma_host_set,
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
.dma_end = hpt374_dma_end,
.dma_test_irq = hpt374_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
};
static const struct ide_dma_ops hpt370_dma_ops = {
.dma_host_set = ide_dma_host_set,
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = hpt370_dma_start,
.dma_end = hpt370_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timeout = hpt370_dma_timeout,
};
static const struct ide_dma_ops hpt36x_dma_ops = {
.dma_host_set = ide_dma_host_set,
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
.dma_end = __ide_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = hpt366_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
};
static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
{ /* 0 */
.name = "HPT36x",
......@@ -1429,7 +1461,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
* Bit 4 is for the primary channel, bit 5 for the secondary.
*/
.enablebits = {{0x50,0x10,0x10}, {0x54,0x04,0x04}},
.extra = 240,
.port_ops = &hpt3xx_port_ops,
.dma_ops = &hpt36x_dma_ops,
.host_flags = IDE_HFLAGS_HPT3XX | IDE_HFLAG_SINGLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
......@@ -1439,7 +1472,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.extra = 240,
.port_ops = &hpt3xx_port_ops,
.dma_ops = &hpt37x_dma_ops,
.host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
......@@ -1449,7 +1483,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.extra = 240,
.port_ops = &hpt3xx_port_ops,
.dma_ops = &hpt37x_dma_ops,
.host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
......@@ -1459,7 +1494,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.extra = 240,
.port_ops = &hpt3xx_port_ops,
.dma_ops = &hpt37x_dma_ops,
.host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
......@@ -1470,7 +1506,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.udma_mask = ATA_UDMA5,
.extra = 240,
.port_ops = &hpt3xx_port_ops,
.dma_ops = &hpt37x_dma_ops,
.host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
......@@ -1480,7 +1517,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.extra = 240,
.port_ops = &hpt3xx_port_ops,
.dma_ops = &hpt37x_dma_ops,
.host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
......@@ -1543,6 +1581,10 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic
d.name = info->chip_name;
d.udma_mask = info->udma_mask;
/* fixup ->dma_ops for HPT370/HPT370A */
if (info == &hpt370 || info == &hpt370a)
d.dma_ops = &hpt370_dma_ops;
pci_set_drvdata(dev, (void *)info);
if (info == &hpt36x || info == &hpt374)
......
drivers/ide/pci/it8213.c
View file @ a52b0d25
......@@ -149,27 +149,17 @@ static u8 __devinit it8213_cable_detect(ide_hwif_t *hwif)
return (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
/**
* init_hwif_it8213 - set up hwif structs
* @hwif: interface to set up
*
* We do the basic set up of the interface structure.
*/
static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
{
hwif->set_dma_mode = &it8213_set_dma_mode;
hwif->set_pio_mode = &it8213_set_pio_mode;
hwif->cable_detect = it8213_cable_detect;
}
static const struct ide_port_ops it8213_port_ops = {
.set_pio_mode = it8213_set_pio_mode,
.set_dma_mode = it8213_set_dma_mode,
.cable_detect = it8213_cable_detect,
};
#define DECLARE_ITE_DEV(name_str) \
{ \
.name = name_str, \
.init_hwif = init_hwif_it8213, \
.enablebits = { {0x41, 0x80, 0x80} }, \
.port_ops = &it8213_port_ops, \
.host_flags = IDE_HFLAG_SINGLE, \
.pio_mask = ATA_PIO4, \
.swdma_mask = ATA_SWDMA2_ONLY, \
......
drivers/ide/pci/it821x.c
View file @ a52b0d25
......@@ -418,7 +418,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
}
/**
* ata66_it821x - check for 80 pin cable
* it821x_cable_detect - cable detection
* @hwif: interface to check
*
* Check for the presence of an ATA66 capable cable on the
......@@ -426,7 +426,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
* the needed logic onboard.
*/
static u8 __devinit ata66_it821x(ide_hwif_t *hwif)
static u8 __devinit it821x_cable_detect(ide_hwif_t *hwif)
{
/* The reference driver also only does disk side */
return ATA_CBL_PATA80;
......@@ -511,6 +511,11 @@ static void __devinit it821x_quirkproc(ide_drive_t *drive)
}
static struct ide_dma_ops it821x_pass_through_dma_ops = {
.dma_start = it821x_dma_start,
.dma_end = it821x_dma_end,
};
/**
* init_hwif_it821x - set up hwif structs
* @hwif: interface to set up
......@@ -527,8 +532,6 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
struct it821x_dev *idev = itdevs[hwif->channel];
u8 conf;
hwif->quirkproc = &it821x_quirkproc;
ide_set_hwifdata(hwif, idev);
pci_read_config_byte(dev, 0x50, &conf);
......@@ -563,17 +566,11 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
}
if (idev->smart == 0) {
hwif->set_pio_mode = &it821x_set_pio_mode;
hwif->set_dma_mode = &it821x_set_dma_mode;
/* MWDMA/PIO clock switching for pass through mode */
hwif->dma_start = &it821x_dma_start;
hwif->ide_dma_end = &it821x_dma_end;
hwif->dma_ops = &it821x_pass_through_dma_ops;
} else
hwif->host_flags |= IDE_HFLAG_NO_SET_MODE;
hwif->cable_detect = ata66_it821x;
if (hwif->dma_base == 0)
return;
......@@ -613,12 +610,20 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha
return 0;
}
static const struct ide_port_ops it821x_port_ops = {
/* it821x_set_{pio,dma}_mode() are only used in pass-through mode */
.set_pio_mode = it821x_set_pio_mode,
.set_dma_mode = it821x_set_dma_mode,
.quirkproc = it821x_quirkproc,
.cable_detect = it821x_cable_detect,
};
#define DECLARE_ITE_DEV(name_str) \
{ \
.name = name_str, \
.init_chipset = init_chipset_it821x, \
.init_hwif = init_hwif_it821x, \
.port_ops = &it821x_port_ops, \
.pio_mask = ATA_PIO4, \
}
......
drivers/ide/pci/jmicron.c
View file @ a52b0d25
......@@ -19,13 +19,13 @@ typedef enum {
} port_type;
/**
* ata66_jmicron - Cable check
* jmicron_cable_detect - cable detection
* @hwif: IDE port
*
* Returns the cable type.
*/
static u8 __devinit ata66_jmicron(ide_hwif_t *hwif)
static u8 __devinit jmicron_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
......@@ -95,25 +95,16 @@ static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode)
{
}
/**
* init_hwif_jmicron - set up hwif structs
* @hwif: interface to set up
*
* Minimal set up is required for the Jmicron hardware.
*/
static void __devinit init_hwif_jmicron(ide_hwif_t *hwif)
{
hwif->set_pio_mode = &jmicron_set_pio_mode;
hwif->set_dma_mode = &jmicron_set_dma_mode;
hwif->cable_detect = ata66_jmicron;
}
static const struct ide_port_ops jmicron_port_ops = {
.set_pio_mode = jmicron_set_pio_mode,
.set_dma_mode = jmicron_set_dma_mode,
.cable_detect = jmicron_cable_detect,
};
static const struct ide_port_info jmicron_chipset __devinitdata = {
.name = "JMB",
.init_hwif = init_hwif_jmicron,
.enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } },
.port_ops = &jmicron_port_ops,
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
......
drivers/ide/pci/ns87415.c
View file @ a52b0d25
......@@ -150,7 +150,7 @@ static void ns87415_selectproc (ide_drive_t *drive)
ns87415_prepare_drive (drive, drive->using_dma);
}
static int ns87415_ide_dma_end (ide_drive_t *drive)
static int ns87415_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 dma_stat = 0, dma_cmd = 0;
......@@ -170,7 +170,7 @@ static int ns87415_ide_dma_end (ide_drive_t *drive)
return (dma_stat & 7) != 4;
}
static int ns87415_ide_dma_setup(ide_drive_t *drive)
static int ns87415_dma_setup(ide_drive_t *drive)
{
/* select DMA xfer */
ns87415_prepare_drive(drive, 1);
......@@ -195,8 +195,6 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
u8 stat;
#endif
hwif->selectproc = &ns87415_selectproc;
/*
* We cannot probe for IRQ: both ports share common IRQ on INTA.
* Also, leave IRQ masked during drive probing, to prevent infinite
......@@ -254,16 +252,31 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
return;
outb(0x60, hwif->dma_status);
hwif->dma_setup = &ns87415_ide_dma_setup;
hwif->ide_dma_end = &ns87415_ide_dma_end;
}
static const struct ide_port_ops ns87415_port_ops = {
.selectproc = ns87415_selectproc,
};
static const struct ide_dma_ops ns87415_dma_ops = {
.dma_host_set = ide_dma_host_set,
.dma_setup = ns87415_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
.dma_end = ns87415_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
};
static const struct ide_port_info ns87415_chipset __devinitdata = {
.name = "NS87415",
#ifdef CONFIG_SUPERIO
.init_iops = init_iops_ns87415,
#endif
.init_hwif = init_hwif_ns87415,
.port_ops = &ns87415_port_ops,
.dma_ops = &ns87415_dma_ops,
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_NO_ATAPI_DMA,
};
......
drivers/ide/pci/opti621.c
View file @ a52b0d25
......@@ -326,28 +326,24 @@ static void __devinit opti621_port_init_devs(ide_hwif_t *hwif)
hwif->drives[1].drive_data = PIO_DONT_KNOW;
}
/*
* init_hwif_opti621() is called once for each hwif found at boot.
*/
static void __devinit init_hwif_opti621(ide_hwif_t *hwif)
{
hwif->port_init_devs = opti621_port_init_devs;
hwif->set_pio_mode = &opti621_set_pio_mode;
}
static const struct ide_port_ops opti621_port_ops = {
.port_init_devs = opti621_port_init_devs,
.set_pio_mode = opti621_set_pio_mode,
};
static const struct ide_port_info opti621_chipsets[] __devinitdata = {
{ /* 0 */
.name = "OPTI621",
.init_hwif = init_hwif_opti621,
.enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
.port_ops = &opti621_port_ops,
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
.pio_mask = ATA_PIO3,
.swdma_mask = ATA_SWDMA2,
.mwdma_mask = ATA_MWDMA2,
}, { /* 1 */
.name = "OPTI621X",
.init_hwif = init_hwif_opti621,
.enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
.port_ops = &opti621_port_ops,
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
.pio_mask = ATA_PIO3,
.swdma_mask = ATA_SWDMA2,
......
drivers/ide/pci/pdc202xx_new.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/pci/pdc202xx_old.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/pci/piix.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/pci/sc1200.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/pci/scc_pata.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/pci/serverworks.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/pci/sgiioc4.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/pci/siimage.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/pci/sis5513.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/pci/sl82c105.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/pci/slc90e66.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/pci/tc86c001.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/pci/triflex.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/pci/trm290.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/pci/via82cxxx.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/ppc/mpc8xx.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/ppc/pmac.c
View file @ a52b0d25
This diff is collapsed.
drivers/ide/setup-pci.c
View file @ a52b0d25
This diff is collapsed.
drivers/scsi/ide-scsi.c
View file @ a52b0d25
This diff is collapsed.
include/asm-mips/mach-au1x00/au1xxx_ide.h
View file @ a52b0d25
This diff is collapsed.
include/linux/ide.h
View file @ a52b0d25
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7