Commit a5321aec authored by Ashok Raj's avatar Ashok Raj Committed by Thomas Gleixner

x86/microcode: Synchronize late microcode loading

Original idea by Ashok, completely rewritten by Borislav.

Before you read any further: the early loading method is still the
preferred one and you should always do that. The following patch is
improving the late loading mechanism for long running jobs and cloud use
cases.

Gather all cores and serialize the microcode update on them by doing it
one-by-one to make the late update process as reliable as possible and
avoid potential issues caused by the microcode update.

[ Borislav: Rewrite completely. ]
Co-developed-by: default avatarBorislav Petkov <bp@suse.de>
Signed-off-by: default avatarAshok Raj <ashok.raj@intel.com>
Signed-off-by: default avatarBorislav Petkov <bp@suse.de>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Tested-by: default avatarTom Lendacky <thomas.lendacky@amd.com>
Tested-by: default avatarAshok Raj <ashok.raj@intel.com>
Reviewed-by: default avatarTom Lendacky <thomas.lendacky@amd.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Link: https://lkml.kernel.org/r/20180228102846.13447-8-bp@alien8.de
parent cfb52a5a
...@@ -22,13 +22,16 @@ ...@@ -22,13 +22,16 @@
#define pr_fmt(fmt) "microcode: " fmt #define pr_fmt(fmt) "microcode: " fmt
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/stop_machine.h>
#include <linux/syscore_ops.h> #include <linux/syscore_ops.h>
#include <linux/miscdevice.h> #include <linux/miscdevice.h>
#include <linux/capability.h> #include <linux/capability.h>
#include <linux/firmware.h> #include <linux/firmware.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/mutex.h> #include <linux/mutex.h>
#include <linux/cpu.h> #include <linux/cpu.h>
#include <linux/nmi.h>
#include <linux/fs.h> #include <linux/fs.h>
#include <linux/mm.h> #include <linux/mm.h>
...@@ -64,6 +67,11 @@ LIST_HEAD(microcode_cache); ...@@ -64,6 +67,11 @@ LIST_HEAD(microcode_cache);
*/ */
static DEFINE_MUTEX(microcode_mutex); static DEFINE_MUTEX(microcode_mutex);
/*
* Serialize late loading so that CPUs get updated one-by-one.
*/
static DEFINE_SPINLOCK(update_lock);
struct ucode_cpu_info ucode_cpu_info[NR_CPUS]; struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
struct cpu_info_ctx { struct cpu_info_ctx {
...@@ -486,6 +494,19 @@ static void __exit microcode_dev_exit(void) ...@@ -486,6 +494,19 @@ static void __exit microcode_dev_exit(void)
/* fake device for request_firmware */ /* fake device for request_firmware */
static struct platform_device *microcode_pdev; static struct platform_device *microcode_pdev;
/*
* Late loading dance. Why the heavy-handed stomp_machine effort?
*
* - HT siblings must be idle and not execute other code while the other sibling
* is loading microcode in order to avoid any negative interactions caused by
* the loading.
*
* - In addition, microcode update on the cores must be serialized until this
* requirement can be relaxed in the future. Right now, this is conservative
* and good.
*/
#define SPINUNIT 100 /* 100 nsec */
static int check_online_cpus(void) static int check_online_cpus(void)
{ {
if (num_online_cpus() == num_present_cpus()) if (num_online_cpus() == num_present_cpus())
...@@ -496,23 +517,85 @@ static int check_online_cpus(void) ...@@ -496,23 +517,85 @@ static int check_online_cpus(void)
return -EINVAL; return -EINVAL;
} }
static enum ucode_state reload_for_cpu(int cpu) static atomic_t late_cpus;
/*
* Returns:
* < 0 - on error
* 0 - no update done
* 1 - microcode was updated
*/
static int __reload_late(void *info)
{ {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu; unsigned int timeout = NSEC_PER_SEC;
int all_cpus = num_online_cpus();
int cpu = smp_processor_id();
enum ucode_state err;
int ret = 0;
if (!uci->valid) atomic_dec(&late_cpus);
return UCODE_OK;
/*
* Wait for all CPUs to arrive. A load will not be attempted unless all
* CPUs show up.
* */
while (atomic_read(&late_cpus)) {
if (timeout < SPINUNIT) {
pr_err("Timeout while waiting for CPUs rendezvous, remaining: %d\n",
atomic_read(&late_cpus));
return -1;
}
ndelay(SPINUNIT);
timeout -= SPINUNIT;
touch_nmi_watchdog();
}
spin_lock(&update_lock);
apply_microcode_local(&err);
spin_unlock(&update_lock);
if (err > UCODE_NFOUND) {
pr_warn("Error reloading microcode on CPU %d\n", cpu);
ret = -1;
} else if (err == UCODE_UPDATED) {
ret = 1;
}
return apply_microcode_on_target(cpu); atomic_inc(&late_cpus);
while (atomic_read(&late_cpus) != all_cpus)
cpu_relax();
return ret;
}
/*
* Reload microcode late on all CPUs. Wait for a sec until they
* all gather together.
*/
static int microcode_reload_late(void)
{
int ret;
atomic_set(&late_cpus, num_online_cpus());
ret = stop_machine_cpuslocked(__reload_late, NULL, cpu_online_mask);
if (ret < 0)
return ret;
else if (ret > 0)
microcode_check();
return ret;
} }
static ssize_t reload_store(struct device *dev, static ssize_t reload_store(struct device *dev,
struct device_attribute *attr, struct device_attribute *attr,
const char *buf, size_t size) const char *buf, size_t size)
{ {
int cpu, bsp = boot_cpu_data.cpu_index;
enum ucode_state tmp_ret = UCODE_OK; enum ucode_state tmp_ret = UCODE_OK;
bool do_callback = false; int bsp = boot_cpu_data.cpu_index;
unsigned long val; unsigned long val;
ssize_t ret = 0; ssize_t ret = 0;
...@@ -534,30 +617,13 @@ static ssize_t reload_store(struct device *dev, ...@@ -534,30 +617,13 @@ static ssize_t reload_store(struct device *dev,
goto put; goto put;
mutex_lock(&microcode_mutex); mutex_lock(&microcode_mutex);
ret = microcode_reload_late();
for_each_online_cpu(cpu) {
tmp_ret = reload_for_cpu(cpu);
if (tmp_ret > UCODE_NFOUND) {
pr_warn("Error reloading microcode on CPU %d\n", cpu);
/* set retval for the first encountered reload error */
if (!ret)
ret = -EINVAL;
}
if (tmp_ret == UCODE_UPDATED)
do_callback = true;
}
if (!ret && do_callback)
microcode_check();
mutex_unlock(&microcode_mutex); mutex_unlock(&microcode_mutex);
put: put:
put_online_cpus(); put_online_cpus();
if (!ret) if (ret >= 0)
ret = size; ret = size;
return ret; return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment