Merge tag 'platform-drivers-x86-v4.2-2' of...

Merge tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull late x86 platform driver updates from Darren Hart:
 "The following came in a bit later and I wanted them to bake in next a
  few more days before submitting, thus the second pull.

  A new intel_pmc_ipc driver, a symmetrical allocation and free fix in
  dell-laptop, a couple minor fixes, and some updated documentation in
  the dell-laptop comments.

  intel_pmc_ipc:
   - Add Intel Apollo Lake PMC IPC driver

  tc1100-wmi:
   - Delete an unnecessary check before the function call "kfree"

  dell-laptop:
   - Fix allocating & freeing SMI buffer page
   - Show info about WiGig and UWB in debugfs
   - Update information about wireless control"

* tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  intel_pmc_ipc: Add Intel Apollo Lake PMC IPC driver
  tc1100-wmi: Delete an unnecessary check before the function call "kfree"
  dell-laptop: Fix allocating & freeing SMI buffer page
  dell-laptop: Show info about WiGig and UWB in debugfs
  dell-laptop: Update information about wireless control

MAINTAINERS

@@ -5470,6 +5470,13 @@ F:	include/linux/mei_cl_bus.h
 F:	drivers/misc/mei/*
 F:	Documentation/misc-devices/mei/*
 
+INTEL PMC IPC DRIVER
+M:	Zha Qipeng<qipeng.zha@intel.com>
+L:	platform-driver-x86@vger.kernel.org
+S:	Maintained
+F:	drivers/platform/x86/intel_pmc_ipc.c
+F:	arch/x86/include/asm/intel_pmc_ipc.h
+
 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-mips@linux-mips.org

arch/x86/include/asm/intel_pmc_ipc.h

+#ifndef _ASM_X86_INTEL_PMC_IPC_H_
+#define  _ASM_X86_INTEL_PMC_IPC_H_
+
+/* Commands */
+#define PMC_IPC_PMIC_ACCESS		0xFF
+#define		PMC_IPC_PMIC_ACCESS_READ	0x0
+#define		PMC_IPC_PMIC_ACCESS_WRITE	0x1
+#define PMC_IPC_USB_PWR_CTRL		0xF0
+#define PMC_IPC_PMIC_BLACKLIST_SEL	0xEF
+#define PMC_IPC_PHY_CONFIG		0xEE
+#define PMC_IPC_NORTHPEAK_CTRL		0xED
+#define PMC_IPC_PM_DEBUG		0xEC
+#define PMC_IPC_PMC_TELEMTRY		0xEB
+#define PMC_IPC_PMC_FW_MSG_CTRL		0xEA
+
+/* IPC return code */
+#define IPC_ERR_NONE			0
+#define IPC_ERR_CMD_NOT_SUPPORTED	1
+#define IPC_ERR_CMD_NOT_SERVICED	2
+#define IPC_ERR_UNABLE_TO_SERVICE	3
+#define IPC_ERR_CMD_INVALID		4
+#define IPC_ERR_CMD_FAILED		5
+#define IPC_ERR_EMSECURITY		6
+#define IPC_ERR_UNSIGNEDKERNEL		7
+
+#if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
+
+/*
+ * intel_pmc_ipc_simple_command
+ * @cmd: command
+ * @sub: sub type
+ */
+int intel_pmc_ipc_simple_command(int cmd, int sub);
+
+/*
+ * intel_pmc_ipc_raw_cmd
+ * @cmd: command
+ * @sub: sub type
+ * @in: input data
+ * @inlen: input length in bytes
+ * @out: output data
+ * @outlen: output length in dwords
+ * @sptr: data writing to SPTR register
+ * @dptr: data writing to DPTR register
+ */
+int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen,
+		u32 *out, u32 outlen, u32 dptr, u32 sptr);
+
+/*
+ * intel_pmc_ipc_command
+ * @cmd: command
+ * @sub: sub type
+ * @in: input data
+ * @inlen: input length in bytes
+ * @out: output data
+ * @outlen: output length in dwords
+ */
+int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
+		u32 *out, u32 outlen);
+
+#else
+
+static inline int intel_pmc_ipc_simple_command(int cmd, int sub)
+{
+	return -EINVAL;
+}
+
+static inline int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen,
+		u32 *out, u32 outlen, u32 dptr, u32 sptr)
+{
+	return -EINVAL;
+}
+
+static inline int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
+		u32 *out, u32 outlen)
+{
+	return -EINVAL;
+}
+
+#endif /*CONFIG_INTEL_PMC_IPC*/
+
+#endif

drivers/platform/x86/Kconfig

@@ -912,4 +912,11 @@ config PVPANIC
 	  a paravirtualized device provided by QEMU; it lets a virtual machine
 	  (guest) communicate panic events to the host.
 
+config INTEL_PMC_IPC
+	tristate "Intel PMC IPC Driver"
+	---help---
+	This driver provides support for PMC control on some Intel platforms.
+	The PMC is an ARC processor which defines IPC commands for communication
+	with other entities in the CPU.
+
 endif # X86_PLATFORM_DEVICES

drivers/platform/x86/Makefile

@@ -59,3 +59,4 @@ obj-$(CONFIG_INTEL_SMARTCONNECT)	+= intel-smartconnect.o
 
 obj-$(CONFIG_PVPANIC)           += pvpanic.o
 obj-$(CONFIG_ALIENWARE_WMI)	+= alienware-wmi.o
+obj-$(CONFIG_INTEL_PMC_IPC)	+= intel_pmc_ipc.o

drivers/platform/x86/dell-laptop.c

@@ -307,7 +307,6 @@ static const struct dmi_system_id dell_quirks[] __initconst = {
 };
 
 static struct calling_interface_buffer *buffer;
-static struct page *bufferpage;
 static DEFINE_MUTEX(buffer_mutex);
 
 static int hwswitch_state;
@@ -424,45 +423,125 @@ static inline int dell_smi_error(int value)
 	}
 }
 
-/* Derived from information in DellWirelessCtl.cpp:
-   Class 17, select 11 is radio control. It returns an array of 32-bit values.
-
-   Input byte 0 = 0: Wireless information
-
-   result[0]: return code
-   result[1]:
-     Bit 0:      Hardware switch supported
-     Bit 1:      Wifi locator supported
-     Bit 2:      Wifi is supported
-     Bit 3:      Bluetooth is supported
-     Bit 4:      WWAN is supported
-     Bit 5:      Wireless keyboard supported
-     Bits 6-7:   Reserved
-     Bit 8:      Wifi is installed
-     Bit 9:      Bluetooth is installed
-     Bit 10:     WWAN is installed
-     Bits 11-15: Reserved
-     Bit 16:     Hardware switch is on
-     Bit 17:     Wifi is blocked
-     Bit 18:     Bluetooth is blocked
-     Bit 19:     WWAN is blocked
-     Bits 20-31: Reserved
-   result[2]: NVRAM size in bytes
-   result[3]: NVRAM format version number
-
-   Input byte 0 = 2: Wireless switch configuration
-   result[0]: return code
-   result[1]:
-     Bit 0:      Wifi controlled by switch
-     Bit 1:      Bluetooth controlled by switch
-     Bit 2:      WWAN controlled by switch
-     Bits 3-6:   Reserved
-     Bit 7:      Wireless switch config locked
-     Bit 8:      Wifi locator enabled
-     Bits 9-14:  Reserved
-     Bit 15:     Wifi locator setting locked
-     Bits 16-31: Reserved
-*/
+/*
+ * Derived from information in smbios-wireless-ctl:
+ *
+ * cbSelect 17, Value 11
+ *
+ * Return Wireless Info
+ * cbArg1, byte0 = 0x00
+ *
+ *     cbRes1 Standard return codes (0, -1, -2)
+ *     cbRes2 Info bit flags:
+ *
+ *     0 Hardware switch supported (1)
+ *     1 WiFi locator supported (1)
+ *     2 WLAN supported (1)
+ *     3 Bluetooth (BT) supported (1)
+ *     4 WWAN supported (1)
+ *     5 Wireless KBD supported (1)
+ *     6 Uw b supported (1)
+ *     7 WiGig supported (1)
+ *     8 WLAN installed (1)
+ *     9 BT installed (1)
+ *     10 WWAN installed (1)
+ *     11 Uw b installed (1)
+ *     12 WiGig installed (1)
+ *     13-15 Reserved (0)
+ *     16 Hardware (HW) switch is On (1)
+ *     17 WLAN disabled (1)
+ *     18 BT disabled (1)
+ *     19 WWAN disabled (1)
+ *     20 Uw b disabled (1)
+ *     21 WiGig disabled (1)
+ *     20-31 Reserved (0)
+ *
+ *     cbRes3 NVRAM size in bytes
+ *     cbRes4, byte 0 NVRAM format version number
+ *
+ *
+ * Set QuickSet Radio Disable Flag
+ *     cbArg1, byte0 = 0x01
+ *     cbArg1, byte1
+ *     Radio ID     value:
+ *     0        Radio Status
+ *     1        WLAN ID
+ *     2        BT ID
+ *     3        WWAN ID
+ *     4        UWB ID
+ *     5        WIGIG ID
+ *     cbArg1, byte2    Flag bits:
+ *             0 QuickSet disables radio (1)
+ *             1-7 Reserved (0)
+ *
+ *     cbRes1    Standard return codes (0, -1, -2)
+ *     cbRes2    QuickSet (QS) radio disable bit map:
+ *     0 QS disables WLAN
+ *     1 QS disables BT
+ *     2 QS disables WWAN
+ *     3 QS disables UWB
+ *     4 QS disables WIGIG
+ *     5-31 Reserved (0)
+ *
+ * Wireless Switch Configuration
+ *     cbArg1, byte0 = 0x02
+ *
+ *     cbArg1, byte1
+ *     Subcommand:
+ *     0 Get config
+ *     1 Set config
+ *     2 Set WiFi locator enable/disable
+ *     cbArg1,byte2
+ *     Switch settings (if byte 1==1):
+ *     0 WLAN sw itch control (1)
+ *     1 BT sw itch control (1)
+ *     2 WWAN sw itch control (1)
+ *     3 UWB sw itch control (1)
+ *     4 WiGig sw itch control (1)
+ *     5-7 Reserved (0)
+ *    cbArg1, byte2 Enable bits (if byte 1==2):
+ *     0 Enable WiFi locator (1)
+ *
+ *    cbRes1     Standard return codes (0, -1, -2)
+ *    cbRes2 QuickSet radio disable bit map:
+ *     0 WLAN controlled by sw itch (1)
+ *     1 BT controlled by sw itch (1)
+ *     2 WWAN controlled by sw itch (1)
+ *     3 UWB controlled by sw itch (1)
+ *     4 WiGig controlled by sw itch (1)
+ *     5-6 Reserved (0)
+ *     7 Wireless sw itch config locked (1)
+ *     8 WiFi locator enabled (1)
+ *     9-14 Reserved (0)
+ *     15 WiFi locator setting locked (1)
+ *     16-31 Reserved (0)
+ *
+ * Read Local Config Data (LCD)
+ *     cbArg1, byte0 = 0x10
+ *     cbArg1, byte1 NVRAM index low byte
+ *     cbArg1, byte2 NVRAM index high byte
+ *     cbRes1 Standard return codes (0, -1, -2)
+ *     cbRes2 4 bytes read from LCD[index]
+ *     cbRes3 4 bytes read from LCD[index+4]
+ *     cbRes4 4 bytes read from LCD[index+8]
+ *
+ * Write Local Config Data (LCD)
+ *     cbArg1, byte0 = 0x11
+ *     cbArg1, byte1 NVRAM index low byte
+ *     cbArg1, byte2 NVRAM index high byte
+ *     cbArg2 4 bytes to w rite at LCD[index]
+ *     cbArg3 4 bytes to w rite at LCD[index+4]
+ *     cbArg4 4 bytes to w rite at LCD[index+8]
+ *     cbRes1 Standard return codes (0, -1, -2)
+ *
+ * Populate Local Config Data from NVRAM
+ *     cbArg1, byte0 = 0x12
+ *     cbRes1 Standard return codes (0, -1, -2)
+ *
+ * Commit Local Config Data to NVRAM
+ *     cbArg1, byte0 = 0x13
+ *     cbRes1 Standard return codes (0, -1, -2)
+ */
 
 static int dell_rfkill_set(void *data, bool blocked)
 {
@@ -550,12 +629,21 @@ static int dell_debugfs_show(struct seq_file *s, void *data)
 		  (status & BIT(4)) >> 4);
 	seq_printf(s, "Bit 5 : Wireless keyboard supported: %lu\n",
 		  (status & BIT(5)) >> 5);
+	seq_printf(s, "Bit 6 : UWB supported:               %lu\n",
+		  (status & BIT(6)) >> 6);
+	seq_printf(s, "Bit 7 : WiGig supported:             %lu\n",
+		  (status & BIT(7)) >> 7);
 	seq_printf(s, "Bit 8 : Wifi is installed:           %lu\n",
 		  (status & BIT(8)) >> 8);
 	seq_printf(s, "Bit 9 : Bluetooth is installed:      %lu\n",
 		  (status & BIT(9)) >> 9);
 	seq_printf(s, "Bit 10: WWAN is installed:           %lu\n",
 		  (status & BIT(10)) >> 10);
+	seq_printf(s, "Bit 11: UWB installed:               %lu\n",
+		  (status & BIT(11)) >> 11);
+	seq_printf(s, "Bit 12: WiGig installed:             %lu\n",
+		  (status & BIT(12)) >> 12);
+
 	seq_printf(s, "Bit 16: Hardware switch is on:       %lu\n",
 		  (status & BIT(16)) >> 16);
 	seq_printf(s, "Bit 17: Wifi is blocked:             %lu\n",
@@ -564,6 +652,10 @@ static int dell_debugfs_show(struct seq_file *s, void *data)
 		  (status & BIT(18)) >> 18);
 	seq_printf(s, "Bit 19: WWAN is blocked:             %lu\n",
 		  (status & BIT(19)) >> 19);
+	seq_printf(s, "Bit 20: UWB is blocked:              %lu\n",
+		  (status & BIT(20)) >> 20);
+	seq_printf(s, "Bit 21: WiGig is blocked:            %lu\n",
+		  (status & BIT(21)) >> 21);
 
 	seq_printf(s, "\nhwswitch_state:\t0x%X\n", hwswitch_state);
 	seq_printf(s, "Bit 0 : Wifi controlled by switch:      %lu\n",
@@ -572,6 +664,10 @@ static int dell_debugfs_show(struct seq_file *s, void *data)
 		   (hwswitch_state & BIT(1)) >> 1);
 	seq_printf(s, "Bit 2 : WWAN controlled by switch:      %lu\n",
 		   (hwswitch_state & BIT(2)) >> 2);
+	seq_printf(s, "Bit 3 : UWB controlled by switch:       %lu\n",
+		   (hwswitch_state & BIT(3)) >> 3);
+	seq_printf(s, "Bit 4 : WiGig controlled by switch:     %lu\n",
+		   (hwswitch_state & BIT(4)) >> 4);
 	seq_printf(s, "Bit 7 : Wireless switch config locked:  %lu\n",
 		   (hwswitch_state & BIT(7)) >> 7);
 	seq_printf(s, "Bit 8 : Wifi locator enabled:           %lu\n",
@@ -1972,12 +2068,11 @@ static int __init dell_init(void)
 	 * Allocate buffer below 4GB for SMI data--only 32-bit physical addr
 	 * is passed to SMI handler.
 	 */
-	bufferpage = alloc_page(GFP_KERNEL | GFP_DMA32);
-	if (!bufferpage) {
+	buffer = (void *)__get_free_page(GFP_KERNEL | GFP_DMA32);
+	if (!buffer) {
 		ret = -ENOMEM;
 		goto fail_buffer;
 	}
-	buffer = page_address(bufferpage);
 
 	ret = dell_setup_rfkill();
 
@@ -2034,7 +2129,7 @@ static int __init dell_init(void)
 fail_backlight:
 	dell_cleanup_rfkill();
 fail_rfkill:
-	free_page((unsigned long)bufferpage);
+	free_page((unsigned long)buffer);
 fail_buffer:
 	platform_device_del(platform_device);
 fail_platform_device2:

drivers/platform/x86/tc1100-wmi.c

@@ -82,7 +82,7 @@ static int get_state(u32 *out, u8 instance)
 		tmp = 0;
 	}
 
-	if (result.length > 0 && result.pointer)
+	if (result.length > 0)
 		kfree(result.pointer);
 
 	switch (instance) {