Merge tag 'master-2014-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

John W. Linville says:

====================
pull request: wireless 2014-08-14

Please pull this batch of fixes intended for the 3.17 stream...

Arend van Spriel brings two brcmfmac fixes, one which fixes a memory
leak and one which corrects some merge damage.

Emmanuel Grumbach fixes Linus's iwlwifi firmware-related log spam.

Rickard Strandqvist does some proper NULL termination after a call
to strncpy.

Ronald Wahl corrects a carl9170 problem with sending URBs with the
wrong endpoint type (resulting in log spam).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/wireless/ath/carl9170/carl9170.h

@@ -256,6 +256,7 @@ struct ar9170 {
 	atomic_t rx_work_urbs;
 	atomic_t rx_pool_urbs;
 	kernel_ulong_t features;
+	bool usb_ep_cmd_is_bulk;
 
 	/* firmware settings */
 	struct completion fw_load_wait;

drivers/net/wireless/ath/carl9170/usb.c

@@ -621,9 +621,16 @@ int __carl9170_exec_cmd(struct ar9170 *ar, struct carl9170_cmd *cmd,
 		goto err_free;
 	}
 
-	usb_fill_int_urb(urb, ar->udev, usb_sndintpipe(ar->udev,
-		AR9170_USB_EP_CMD), cmd, cmd->hdr.len + 4,
-		carl9170_usb_cmd_complete, ar, 1);
+	if (ar->usb_ep_cmd_is_bulk)
+		usb_fill_bulk_urb(urb, ar->udev,
+				  usb_sndbulkpipe(ar->udev, AR9170_USB_EP_CMD),
+				  cmd, cmd->hdr.len + 4,
+				  carl9170_usb_cmd_complete, ar);
+	else
+		usb_fill_int_urb(urb, ar->udev,
+				 usb_sndintpipe(ar->udev, AR9170_USB_EP_CMD),
+				 cmd, cmd->hdr.len + 4,
+				 carl9170_usb_cmd_complete, ar, 1);
 
 	if (free_buf)
 		urb->transfer_flags |= URB_FREE_BUFFER;
@@ -1032,9 +1039,10 @@ static void carl9170_usb_firmware_step2(const struct firmware *fw,
 static int carl9170_usb_probe(struct usb_interface *intf,
 			      const struct usb_device_id *id)
 {
+	struct usb_endpoint_descriptor *ep;
 	struct ar9170 *ar;
 	struct usb_device *udev;
-	int err;
+	int i, err;
 
 	err = usb_reset_device(interface_to_usbdev(intf));
 	if (err)
@@ -1050,6 +1058,21 @@ static int carl9170_usb_probe(struct usb_interface *intf,
 	ar->intf = intf;
 	ar->features = id->driver_info;
 
+	/* We need to remember the type of endpoint 4 because it differs
+	 * between high- and full-speed configuration. The high-speed
+	 * configuration specifies it as interrupt and the full-speed
+	 * configuration as bulk endpoint. This information is required
+	 * later when sending urbs to that endpoint.
+	 */
+	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; ++i) {
+		ep = &intf->cur_altsetting->endpoint[i].desc;
+
+		if (usb_endpoint_num(ep) == AR9170_USB_EP_CMD &&
+		    usb_endpoint_dir_out(ep) &&
+		    usb_endpoint_type(ep) == USB_ENDPOINT_XFER_BULK)
+			ar->usb_ep_cmd_is_bulk = true;
+	}
+
 	usb_set_intfdata(intf, ar);
 	SET_IEEE80211_DEV(ar->hw, &intf->dev);
 

drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c

@@ -1318,6 +1318,8 @@ int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
 	msgbuf->nrof_flowrings = if_msgbuf->nrof_flowrings;
 	msgbuf->flowring_dma_handle = kzalloc(msgbuf->nrof_flowrings *
 		sizeof(*msgbuf->flowring_dma_handle), GFP_ATOMIC);
+	if (!msgbuf->flowring_dma_handle)
+		goto fail;
 
 	msgbuf->rx_dataoffset = if_msgbuf->rx_dataoffset;
 	msgbuf->max_rxbufpost = if_msgbuf->max_rxbufpost;
@@ -1362,6 +1364,7 @@ int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
 		kfree(msgbuf->flow_map);
 		kfree(msgbuf->txstatus_done_map);
 		brcmf_msgbuf_release_pktids(msgbuf);
+		kfree(msgbuf->flowring_dma_handle);
 		if (msgbuf->ioctbuf)
 			dma_free_coherent(drvr->bus_if->dev,
 					  BRCMF_TX_IOCTL_MAX_MSG_SIZE,
@@ -1391,6 +1394,7 @@ void brcmf_proto_msgbuf_detach(struct brcmf_pub *drvr)
 				  BRCMF_TX_IOCTL_MAX_MSG_SIZE,
 				  msgbuf->ioctbuf, msgbuf->ioctbuf_handle);
 		brcmf_msgbuf_release_pktids(msgbuf);
+		kfree(msgbuf->flowring_dma_handle);
 		kfree(msgbuf);
 		drvr->proto->pd = NULL;
 	}

drivers/net/wireless/brcm80211/brcmfmac/pcie.c

@@ -591,12 +591,13 @@ static void brcmf_pcie_handle_mb_data(struct brcmf_pciedev_info *devinfo)
 	}
 	if (dtoh_mb_data & BRCMF_D2H_DEV_DS_EXIT_NOTE)
 		brcmf_dbg(PCIE, "D2H_MB_DATA: DEEP SLEEP EXIT\n");
-	if (dtoh_mb_data & BRCMF_D2H_DEV_D3_ACK)
+	if (dtoh_mb_data & BRCMF_D2H_DEV_D3_ACK) {
 		brcmf_dbg(PCIE, "D2H_MB_DATA: D3 ACK\n");
 		if (waitqueue_active(&devinfo->mbdata_resp_wait)) {
 			devinfo->mbdata_completed = true;
 			wake_up(&devinfo->mbdata_resp_wait);
 		}
+	}
 }
 
 

drivers/net/wireless/ipw2x00/ipw2200.c

@@ -9853,6 +9853,7 @@ static int ipw_wx_get_wireless_mode(struct net_device *dev,
 		strncpy(extra, "unknown", MAX_WX_STRING);
 		break;
 	}
+	extra[MAX_WX_STRING - 1] = '\0';
 
 	IPW_DEBUG_WX("PRIV GET MODE: %s\n", extra);
 

drivers/net/wireless/iwlwifi/mvm/mac80211.c

@@ -396,7 +396,8 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 	else
 		hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
-	hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
+	/* TODO: enable that only for firmwares that don't crash */
+	/* hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN; */
 	hw->wiphy->max_sched_scan_ssids = PROBE_OPTION_MAX;
 	hw->wiphy->max_match_sets = IWL_SCAN_MAX_PROFILES;
 	/* we create the 802.11 header and zero length SSID IE. */