Commit a8353a57 authored by Peter Ujfalusi's avatar Peter Ujfalusi Committed by Mark Brown

ASoC: Beagle: Add support for 4 channel

This patch adds support for the four channel TDM mode
on Beagle board.

Depending on the channel count, the interface needs to be
configured differently (I2S for stereo DSP_A for four channels)
Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 8a1f936a
......@@ -41,23 +41,33 @@ static int omap3beagle_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
unsigned int fmt;
int ret;
switch (params_channels(params)) {
case 2: /* Stereo I2S mode */
fmt = SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBM_CFM;
break;
case 4: /* Four channel TDM mode */
fmt = SND_SOC_DAIFMT_DSP_A |
SND_SOC_DAIFMT_IB_NF |
SND_SOC_DAIFMT_CBM_CFM;
break;
default:
return -EINVAL;
}
/* Set codec DAI configuration */
ret = snd_soc_dai_set_fmt(codec_dai,
SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBM_CFM);
ret = snd_soc_dai_set_fmt(codec_dai, fmt);
if (ret < 0) {
printk(KERN_ERR "can't set codec DAI configuration\n");
return ret;
}
/* Set cpu DAI configuration */
ret = snd_soc_dai_set_fmt(cpu_dai,
SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBM_CFM);
ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
if (ret < 0) {
printk(KERN_ERR "can't set cpu DAI configuration\n");
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment