Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (41 commits)
  HID: usbhid: initialize interface pointers early enough
  HID: extend mask for BUTTON usage page
  HID: hid-ntrig: Single touch mode tap
  HID: hid-ntrig: multitouch cleanup and fix
  HID: n-trig: remove unnecessary tool switching
  HID: hid-ntrig add multi input quirk and clean up
  HID: usbhid: introduce timeout for stuck ctrl/out URBs
  HID: magicmouse: coding style and probe failure fixes
  HID: remove MODULE_VERSION from new drivers
  HID: fix up Kconfig entry for MagicMouse
  HID: add a device driver for the Apple Magic Mouse.
  HID: Export hid_register_report
  HID: Support for MosArt multitouch panel
  HID: add pressure support for the Stantum multitouch panel
  HID: fixed bug in single-touch emulation on the stantum panel
  HID: fix typo in error message
  HID: add mapping for "AL Network Chat" usage
  HID: use multi input quirk for TouchPack touchscreen
  HID: make full-fledged hid-bus drivers properly selectable
  HID: make Wacom modesetting failures non-fatal
  ...

drivers/hid/Kconfig

@@ -55,6 +55,12 @@ source "drivers/hid/usbhid/Kconfig"
 menu "Special HID drivers"
 	depends on HID
 
+config HID_3M_PCT
+	tristate "3M PCT"
+	depends on USB_HID
+	---help---
+	Support for 3M PCT touch screens.
+
 config HID_A4TECH
 	tristate "A4 tech" if EMBEDDED
 	depends on USB_HID
@@ -183,6 +189,23 @@ config LOGIRUMBLEPAD2_FF
 	  Say Y here if you want to enable force feedback support for Logitech
 	  Rumblepad 2 devices.
 
+config LOGIG940_FF
+	bool "Logitech Flight System G940 force feedback support"
+	depends on HID_LOGITECH
+	select INPUT_FF_MEMLESS
+	help
+	  Say Y here if you want to enable force feedback support for Logitech
+	  Flight System G940 devices.
+
+config HID_MAGICMOUSE
+	tristate "Apple MagicMouse multi-touch support"
+	depends on BT_HIDP
+	---help---
+	Support for the Apple Magic Mouse multi-touch.
+
+	Say Y here if you want support for the multi-touch features of the
+	Apple Wireless "Magic" Mouse.
+
 config HID_MICROSOFT
 	tristate "Microsoft" if EMBEDDED
 	depends on USB_HID
@@ -190,6 +213,12 @@ config HID_MICROSOFT
 	---help---
 	Support for Microsoft devices that are not fully compliant with HID standard.
 
+config HID_MOSART
+	tristate "MosArt"
+	depends on USB_HID
+	---help---
+	Support for MosArt dual-touch panels.
+
 config HID_MONTEREY
 	tristate "Monterey" if EMBEDDED
 	depends on USB_HID
@@ -198,12 +227,18 @@ config HID_MONTEREY
 	Support for Monterey Genius KB29E.
 
 config HID_NTRIG
-	tristate "NTrig" if EMBEDDED
+	tristate "NTrig"
 	depends on USB_HID
-	default !EMBEDDED
 	---help---
 	Support for N-Trig touch screen.
 
+config HID_ORTEK
+	tristate "Ortek" if EMBEDDED
+	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	Support for Ortek WKB-2000 wireless keyboard + mouse trackpad.
+
 config HID_PANTHERLORD
 	tristate "Pantherlord support" if EMBEDDED
 	depends on USB_HID
@@ -227,6 +262,12 @@ config HID_PETALYNX
 	---help---
 	Support for Petalynx Maxter remote control.
 
+config HID_QUANTA
+	tristate "Quanta Optical Touch"
+	depends on USB_HID
+	---help---
+	Support for Quanta Optical Touch dual-touch panels.
+
 config HID_SAMSUNG
 	tristate "Samsung" if EMBEDDED
 	depends on USB_HID
@@ -241,6 +282,12 @@ config HID_SONY
 	---help---
 	Support for Sony PS3 controller.
 
+config HID_STANTUM
+	tristate "Stantum"
+	depends on USB_HID
+	---help---
+	Support for Stantum multitouch panel.
+
 config HID_SUNPLUS
 	tristate "Sunplus" if EMBEDDED
 	depends on USB_HID
@@ -305,9 +352,8 @@ config THRUSTMASTER_FF
 	  Rumble Force or Force Feedback Wheel.
 
 config HID_WACOM
-	tristate "Wacom Bluetooth devices support" if EMBEDDED
+	tristate "Wacom Bluetooth devices support"
 	depends on BT_HIDP
-	default !EMBEDDED
 	---help---
 	Support for Wacom Graphire Bluetooth tablet.
 

drivers/hid/Makefile

@@ -18,7 +18,11 @@ endif
 ifdef CONFIG_LOGIRUMBLEPAD2_FF
 	hid-logitech-objs	+= hid-lg2ff.o
 endif
+ifdef CONFIG_LOGIG940_FF
+	hid-logitech-objs	+= hid-lg3ff.o
+endif
 
+obj-$(CONFIG_HID_3M_PCT)	+= hid-3m-pct.o
 obj-$(CONFIG_HID_A4TECH)	+= hid-a4tech.o
 obj-$(CONFIG_HID_APPLE)		+= hid-apple.o
 obj-$(CONFIG_HID_BELKIN)	+= hid-belkin.o
@@ -31,14 +35,19 @@ obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
 obj-$(CONFIG_HID_KENSINGTON)	+= hid-kensington.o
 obj-$(CONFIG_HID_KYE)		+= hid-kye.o
 obj-$(CONFIG_HID_LOGITECH)	+= hid-logitech.o
+obj-$(CONFIG_HID_MAGICMOUSE)    += hid-magicmouse.o
 obj-$(CONFIG_HID_MICROSOFT)	+= hid-microsoft.o
 obj-$(CONFIG_HID_MONTEREY)	+= hid-monterey.o
+obj-$(CONFIG_HID_MOSART)	+= hid-mosart.o
 obj-$(CONFIG_HID_NTRIG)		+= hid-ntrig.o
+obj-$(CONFIG_HID_ORTEK)		+= hid-ortek.o
+obj-$(CONFIG_HID_QUANTA)	+= hid-quanta.o
 obj-$(CONFIG_HID_PANTHERLORD)	+= hid-pl.o
 obj-$(CONFIG_HID_PETALYNX)	+= hid-petalynx.o
 obj-$(CONFIG_HID_SAMSUNG)	+= hid-samsung.o
 obj-$(CONFIG_HID_SMARTJOYPLUS)	+= hid-sjoy.o
 obj-$(CONFIG_HID_SONY)		+= hid-sony.o
+obj-$(CONFIG_HID_STANTUM)	+= hid-stantum.o
 obj-$(CONFIG_HID_SUNPLUS)	+= hid-sunplus.o
 obj-$(CONFIG_HID_GREENASIA)	+= hid-gaff.o
 obj-$(CONFIG_HID_THRUSTMASTER)	+= hid-tmff.o

drivers/hid/hid-3m-pct.c

+/*
+ *  HID driver for 3M PCT multitouch panels
+ *
+ *  Copyright (c) 2009 Stephane Chatty <chatty@enac.fr>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("3M PCT multitouch panels");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct mmm_finger {
+	__s32 x, y;
+	__u8 rank;
+	bool touch, valid;
+};
+
+struct mmm_data {
+	struct mmm_finger f[10];
+	__u8 curid, num;
+	bool touch, valid;
+};
+
+static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	switch (usage->hid & HID_USAGE_PAGE) {
+
+	case HID_UP_BUTTON:
+		return -1;
+
+	case HID_UP_GENDESK:
+		switch (usage->hid) {
+		case HID_GD_X:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_X);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_X,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		case HID_GD_Y:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_Y);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_Y,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case HID_UP_DIGITIZER:
+		switch (usage->hid) {
+		/* we do not want to map these: no input-oriented meaning */
+		case 0x14:
+		case 0x23:
+		case HID_DG_INPUTMODE:
+		case HID_DG_DEVICEINDEX:
+		case HID_DG_CONTACTCOUNT:
+		case HID_DG_CONTACTMAX:
+		case HID_DG_INRANGE:
+		case HID_DG_CONFIDENCE:
+			return -1;
+		case HID_DG_TIPSWITCH:
+			/* touchscreen emulation */
+			hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+			return 1;
+		case HID_DG_CONTACTID:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TRACKING_ID);
+			return 1;
+		}
+		/* let hid-input decide for the others */
+		return 0;
+
+	case 0xff000000:
+		/* we do not want to map these: no input-oriented meaning */
+		return -1;
+	}
+
+	return 0;
+}
+
+static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	if (usage->type == EV_KEY || usage->type == EV_ABS)
+		clear_bit(usage->code, *bit);
+
+	return 0;
+}
+
+/*
+ * this function is called when a whole packet has been received and processed,
+ * so that it can decide what to send to the input layer.
+ */
+static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
+{
+	struct mmm_finger *oldest = 0;
+	bool pressed = false, released = false;
+	int i;
+
+	/*
+	 * we need to iterate on all fingers to decide if we have a press
+	 * or a release event in our touchscreen emulation.
+	 */
+	for (i = 0; i < 10; ++i) {
+		struct mmm_finger *f = &md->f[i];
+		if (!f->valid) {
+			/* this finger is just placeholder data, ignore */
+		} else if (f->touch) {
+			/* this finger is on the screen */
+			input_event(input, EV_ABS, ABS_MT_TRACKING_ID, i);
+			input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x);
+			input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y);
+			input_mt_sync(input);
+			/*
+			 * touchscreen emulation: maintain the age rank
+			 * of this finger, decide if we have a press
+			 */
+			if (f->rank == 0) {
+				f->rank = ++(md->num);
+				if (f->rank == 1)
+					pressed = true;
+			}
+			if (f->rank == 1)
+				oldest = f;
+		} else {
+			/* this finger took off the screen */
+			/* touchscreen emulation: maintain age rank of others */
+			int j;
+
+			for (j = 0; j < 10; ++j) {
+				struct mmm_finger *g = &md->f[j];
+				if (g->rank > f->rank) {
+					g->rank--;
+					if (g->rank == 1)
+						oldest = g;
+				}
+			}
+			f->rank = 0;
+			--(md->num);
+			if (md->num == 0)
+				released = true;
+		}
+		f->valid = 0;
+	}
+
+	/* touchscreen emulation */
+	if (oldest) {
+		if (pressed)
+			input_event(input, EV_KEY, BTN_TOUCH, 1);
+		input_event(input, EV_ABS, ABS_X, oldest->x);
+		input_event(input, EV_ABS, ABS_Y, oldest->y);
+	} else if (released) {
+		input_event(input, EV_KEY, BTN_TOUCH, 0);
+	}
+}
+
+/*
+ * this function is called upon all reports
+ * so that we can accumulate contact point information,
+ * and call input_mt_sync after each point.
+ */
+static int mmm_event(struct hid_device *hid, struct hid_field *field,
+				struct hid_usage *usage, __s32 value)
+{
+	struct mmm_data *md = hid_get_drvdata(hid);
+	/*
+	 * strangely, this function can be called before
+	 * field->hidinput is initialized!
+	 */
+	if (hid->claimed & HID_CLAIMED_INPUT) {
+		struct input_dev *input = field->hidinput->input;
+		switch (usage->hid) {
+		case HID_DG_TIPSWITCH:
+			md->touch = value;
+			break;
+		case HID_DG_CONFIDENCE:
+			md->valid = value;
+			break;
+		case HID_DG_CONTACTID:
+			if (md->valid) {
+				md->curid = value;
+				md->f[value].touch = md->touch;
+				md->f[value].valid = 1;
+			}
+			break;
+		case HID_GD_X:
+			if (md->valid)
+				md->f[md->curid].x = value;
+			break;
+		case HID_GD_Y:
+			if (md->valid)
+				md->f[md->curid].y = value;
+			break;
+		case HID_DG_CONTACTCOUNT:
+			mmm_filter_event(md, input);
+			break;
+		}
+	}
+
+	/* we have handled the hidinput part, now remains hiddev */
+	if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+		hid->hiddev_hid_event(hid, field, usage, value);
+
+	return 1;
+}
+
+static int mmm_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct mmm_data *md;
+
+	md = kzalloc(sizeof(struct mmm_data), GFP_KERNEL);
+	if (!md) {
+		dev_err(&hdev->dev, "cannot allocate 3M data\n");
+		return -ENOMEM;
+	}
+	hid_set_drvdata(hdev, md);
+
+	ret = hid_parse(hdev);
+	if (!ret)
+		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+	if (ret)
+		kfree(md);
+	return ret;
+}
+
+static void mmm_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+	hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id mmm_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, mmm_devices);
+
+static const struct hid_usage_id mmm_grabbed_usages[] = {
+	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver mmm_driver = {
+	.name = "3m-pct",
+	.id_table = mmm_devices,
+	.probe = mmm_probe,
+	.remove = mmm_remove,
+	.input_mapping = mmm_input_mapping,
+	.input_mapped = mmm_input_mapped,
+	.usage_table = mmm_grabbed_usages,
+	.event = mmm_event,
+};
+
+static int __init mmm_init(void)
+{
+	return hid_register_driver(&mmm_driver);
+}
+
+static void __exit mmm_exit(void)
+{
+	hid_unregister_driver(&mmm_driver);
+}
+
+module_init(mmm_init);
+module_exit(mmm_exit);
+MODULE_LICENSE("GPL");
+

drivers/hid/hid-apple.c

@@ -40,6 +40,11 @@ module_param(fnmode, uint, 0644);
 MODULE_PARM_DESC(fnmode, "Mode of fn key on Apple keyboards (0 = disabled, "
 		"[1] = fkeyslast, 2 = fkeysfirst)");
 
+static unsigned int iso_layout = 1;
+module_param(iso_layout, uint, 0644);
+MODULE_PARM_DESC(iso_layout, "Enable/Disable hardcoded ISO-layout of the keyboard. "
+		"(0 = disabled, [1] = enabled)");
+
 struct apple_sc {
 	unsigned long quirks;
 	unsigned int fn_on;
@@ -199,11 +204,13 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 		}
 	}
 
-	if (asc->quirks & APPLE_ISO_KEYBOARD) {
-		trans = apple_find_translation(apple_iso_keyboard, usage->code);
-		if (trans) {
-			input_event(input, usage->type, trans->to, value);
-			return 1;
+        if (iso_layout) {
+		if (asc->quirks & APPLE_ISO_KEYBOARD) {
+			trans = apple_find_translation(apple_iso_keyboard, usage->code);
+			if (trans) {
+				input_event(input, usage->type, trans->to, value);
+				return 1;
+			}
 		}
 	}
 

drivers/hid/hid-core.c

@@ -4,7 +4,7 @@
  *  Copyright (c) 1999 Andreas Gal
  *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
  *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
- *  Copyright (c) 2006-2007 Jiri Kosina
+ *  Copyright (c) 2006-2010 Jiri Kosina
  */
 
 /*
@@ -51,7 +51,7 @@ EXPORT_SYMBOL_GPL(hid_debug);
  * Register a new report for a device.
  */
 
-static struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id)
+struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id)
 {
 	struct hid_report_enum *report_enum = device->report_enum + type;
 	struct hid_report *report;
@@ -75,6 +75,7 @@ static struct hid_report *hid_register_report(struct hid_device *device, unsigne
 
 	return report;
 }
+EXPORT_SYMBOL_GPL(hid_register_report);
 
 /*
  * Register a new field for this report.
@@ -387,7 +388,8 @@ static int hid_parser_local(struct hid_parser *parser, struct hid_item *item)
 	__u32 data;
 	unsigned n;
 
-	if (item->size == 0) {
+	/* Local delimiter could have value 0, which allows size to be 0 */
+	if (item->size == 0 && item->tag != HID_LOCAL_ITEM_TAG_DELIMITER) {
 		dbg_hid("item data expected for local item\n");
 		return -1;
 	}
@@ -1248,11 +1250,13 @@ EXPORT_SYMBOL_GPL(hid_disconnect);
 
 /* a list of devices for which there is a specialized driver on HID bus */
 static const struct hid_device_id hid_blacklist[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI) },
@@ -1324,6 +1328,7 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_F3D) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG ) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
@@ -1337,10 +1342,15 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
@@ -1543,8 +1553,9 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)},
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)},
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT)},
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)},
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)},
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
@@ -1661,8 +1672,6 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },

drivers/hid/hid-debug.c

@@ -864,13 +864,13 @@ static const char **names[EV_MAX + 1] = {
 	[EV_SND] = sounds,			[EV_REP] = repeats,
 };
 
-void hid_resolv_event(__u8 type, __u16 code, struct seq_file *f) {
-
+static void hid_resolv_event(__u8 type, __u16 code, struct seq_file *f)
+{
 	seq_printf(f, "%s.%s", events[type] ? events[type] : "?",
 		names[type] ? (names[type][code] ? names[type][code] : "?") : "?");
 }
 
-void hid_dump_input_mapping(struct hid_device *hid, struct seq_file *f)
+static void hid_dump_input_mapping(struct hid_device *hid, struct seq_file *f)
 {
 	int i, j, k;
 	struct hid_report *report;

drivers/hid/hid-ids.h

@@ -18,6 +18,9 @@
 #ifndef HID_IDS_H_FILE
 #define HID_IDS_H_FILE
 
+#define USB_VENDOR_ID_3M		0x0596
+#define USB_DEVICE_ID_3M1968		0x0500
+
 #define USB_VENDOR_ID_A4TECH		0x09da
 #define USB_DEVICE_ID_A4TECH_WCP32PU	0x0006
 #define USB_DEVICE_ID_A4TECH_X5_005D	0x000a
@@ -56,6 +59,7 @@
 
 #define USB_VENDOR_ID_APPLE		0x05ac
 #define USB_DEVICE_ID_APPLE_MIGHTYMOUSE	0x0304
+#define USB_DEVICE_ID_APPLE_MAGICMOUSE	0x030d
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI	0x020e
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO	0x020f
 #define USB_DEVICE_ID_APPLE_GEYSER_ANSI	0x0214
@@ -96,9 +100,12 @@
 #define USB_DEVICE_ID_APPLE_ATV_IRCONTROL	0x8241
 #define USB_DEVICE_ID_APPLE_IRCONTROL4	0x8242
 
-#define USB_VENDOR_ID_ASUS		0x0b05
-#define USB_DEVICE_ID_ASUS_LCM		0x1726
-#define USB_DEVICE_ID_ASUS_LCM2		0x175b
+#define USB_VENDOR_ID_ASUS		0x0486
+#define USB_DEVICE_ID_ASUS_T91MT	0x0185
+
+#define USB_VENDOR_ID_ASUSTEK		0x0b05
+#define USB_DEVICE_ID_ASUSTEK_LCM	0x1726
+#define USB_DEVICE_ID_ASUSTEK_LCM2	0x175b
 
 #define USB_VENDOR_ID_ATEN		0x0557
 #define USB_DEVICE_ID_ATEN_UC100KM	0x2004
@@ -169,6 +176,9 @@
 #define USB_VENDOR_ID_ESSENTIAL_REALITY	0x0d7f
 #define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
 
+#define USB_VENDOR_ID_ETURBOTOUCH	0x22b9
+#define USB_DEVICE_ID_ETURBOTOUCH	0x0006
+
 #define USB_VENDOR_ID_ETT		0x0664
 #define USB_DEVICE_ID_TC5UH		0x0309
 
@@ -303,6 +313,7 @@
 #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2	0xc219
 #define USB_DEVICE_ID_LOGITECH_WINGMAN_F3D	0xc283
 #define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO	0xc286
+#define USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940	0xc287
 #define USB_DEVICE_ID_LOGITECH_WHEEL	0xc294
 #define USB_DEVICE_ID_LOGITECH_WINGMAN_FFG	0xc293
 #define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL	0xc295
@@ -365,6 +376,9 @@
 #define USB_VENDOR_ID_ONTRAK		0x0a07
 #define USB_DEVICE_ID_ONTRAK_ADU100	0x0064
 
+#define USB_VENDOR_ID_ORTEK		0x05a4
+#define USB_DEVICE_ID_ORTEK_WKB2000	0x2000
+
 #define USB_VENDOR_ID_PANJIT		0x134c
 
 #define USB_VENDOR_ID_PANTHERLORD	0x0810
@@ -382,9 +396,16 @@
 #define USB_VENDOR_ID_POWERCOM		0x0d9f
 #define USB_DEVICE_ID_POWERCOM_UPS	0x0002
 
+#define USB_VENDOR_ID_PRODIGE		0x05af
+#define USB_DEVICE_ID_PRODIGE_CORDLESS	0x3062
+
 #define USB_VENDOR_ID_SAITEK		0x06a3
 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD	0xff17
 
+#define USB_VENDOR_ID_QUANTA		0x0408
+#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH	0x3000
+#define USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN	0x3001
+
 #define USB_VENDOR_ID_SAMSUNG		0x0419
 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE	0x0001
 
@@ -396,18 +417,20 @@
 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_FIRST	0x0034
 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LAST	0x0046
 
+#define USB_VENDOR_ID_STANTUM		0x1f87
+#define USB_DEVICE_ID_MTP		0x0002
+
 #define USB_VENDOR_ID_SUN		0x0430
 #define USB_DEVICE_ID_RARITAN_KVM_DONGLE	0xcdab
 
 #define USB_VENDOR_ID_SUNPLUS		0x04fc
 #define USB_DEVICE_ID_SUNPLUS_WDESKTOP	0x05d8
 
-#define USB_VENDOR_ID_TENX		0x1130
-#define USB_DEVICE_ID_TENX_IBUDDY1	0x0001
-#define USB_DEVICE_ID_TENX_IBUDDY2	0x0002
-
 #define USB_VENDOR_ID_THRUSTMASTER	0x044f
 
+#define USB_VENDOR_ID_TOUCHPACK		0x1bfd
+#define USB_DEVICE_ID_TOUCHPACK_RTS	0x1688
+
 #define USB_VENDOR_ID_TOPMAX		0x0663
 #define USB_DEVICE_ID_TOPMAX_COBRAPAD	0x0103
 

drivers/hid/hid-input.c

 /*
  *  Copyright (c) 2000-2001 Vojtech Pavlik
- *  Copyright (c) 2006-2007 Jiri Kosina
+ *  Copyright (c) 2006-2010 Jiri Kosina
  *
  *  HID to Linux Input mapping
  */
@@ -193,12 +193,17 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		break;
 
 	case HID_UP_BUTTON:
-		code = ((usage->hid - 1) & 0xf);
+		code = ((usage->hid - 1) & HID_USAGE);
 
 		switch (field->application) {
 		case HID_GD_MOUSE:
 		case HID_GD_POINTER:  code += 0x110; break;
-		case HID_GD_JOYSTICK: code += 0x120; break;
+		case HID_GD_JOYSTICK:
+				      if (code <= 0xf)
+					      code += BTN_JOYSTICK;
+				      else
+					      code += BTN_TRIGGER_HAPPY;
+				      break;
 		case HID_GD_GAMEPAD:  code += 0x130; break;
 		default:
 			switch (field->physical) {
@@ -400,6 +405,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case 0x192: map_key_clear(KEY_CALC);		break;
 		case 0x194: map_key_clear(KEY_FILE);		break;
 		case 0x196: map_key_clear(KEY_WWW);		break;
+		case 0x199: map_key_clear(KEY_CHAT);		break;
 		case 0x19c: map_key_clear(KEY_LOGOFF);		break;
 		case 0x19e: map_key_clear(KEY_COFFEE);		break;
 		case 0x1a6: map_key_clear(KEY_HELP);		break;

drivers/hid/hid-lg.c

@@ -34,6 +34,7 @@
 #define LG_FF			0x200
 #define LG_FF2			0x400
 #define LG_RDESC_REL_ABS	0x800
+#define LG_FF3			0x1000
 
 /*
  * Certain Logitech keyboards send in report #3 keys which are far
@@ -266,7 +267,7 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		goto err_free;
 	}
 
-	if (quirks & (LG_FF | LG_FF2))
+	if (quirks & (LG_FF | LG_FF2 | LG_FF3))
 		connect_mask &= ~HID_CONNECT_FF;
 
 	ret = hid_hw_start(hdev, connect_mask);
@@ -279,6 +280,8 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		lgff_init(hdev);
 	if (quirks & LG_FF2)
 		lg2ff_init(hdev);
+	if (quirks & LG_FF3)
+		lg3ff_init(hdev);
 
 	return 0;
 err_free:
@@ -331,6 +334,8 @@ static const struct hid_device_id lg_devices[] = {
 		.driver_data = LG_FF },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2),
 		.driver_data = LG_FF2 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940),
+		.driver_data = LG_FF3 },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR),
 		.driver_data = LG_RDESC_REL_ABS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER),

drivers/hid/hid-lg.h

@@ -13,4 +13,10 @@ int lg2ff_init(struct hid_device *hdev);
 static inline int lg2ff_init(struct hid_device *hdev) { return -1; }
 #endif
 
+#ifdef CONFIG_LOGIG940_FF
+int lg3ff_init(struct hid_device *hdev);
+#else
+static inline int lg3ff_init(struct hid_device *hdev) { return -1; }
+#endif
+
 #endif

drivers/hid/hid-lg3ff.c

+/*
+ *  Force feedback support for Logitech Flight System G940
+ *
+ *  Copyright (c) 2009 Gary Stein <LordCnidarian@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+
+#include "usbhid/usbhid.h"
+#include "hid-lg.h"
+
+/*
+ * G940 Theory of Operation (from experimentation)
+ *
+ * There are 63 fields (only 3 of them currently used)
+ * 0 - seems to be command field
+ * 1 - 30 deal with the x axis
+ * 31 -60 deal with the y axis
+ *
+ * Field 1 is x axis constant force
+ * Field 31 is y axis constant force
+ *
+ * other interesting fields 1,2,3,4 on x axis
+ * (same for 31,32,33,34 on y axis)
+ *
+ * 0 0 127 127 makes the joystick autocenter hard
+ *
+ * 127 0 127 127 makes the joystick loose on the right,
+ * but stops all movemnt left
+ *
+ * -127 0 -127 -127 makes the joystick loose on the left,
+ * but stops all movement right
+ *
+ * 0 0 -127 -127 makes the joystick rattle very hard
+ *
+ * I'm sure these are effects that I don't know enough about them
+ */
+
+struct lg3ff_device {
+	struct hid_report *report;
+};
+
+static int hid_lg3ff_play(struct input_dev *dev, void *data,
+			 struct ff_effect *effect)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+	int x, y;
+
+/*
+ * Maxusage should always be 63 (maximum fields)
+ * likely a better way to ensure this data is clean
+ */
+	memset(report->field[0]->value, 0, sizeof(__s32)*report->field[0]->maxusage);
+
+	switch (effect->type) {
+	case FF_CONSTANT:
+/*
+ * Already clamped in ff_memless
+ * 0 is center (different then other logitech)
+ */
+		x = effect->u.ramp.start_level;
+		y = effect->u.ramp.end_level;
+
+		/* send command byte */
+		report->field[0]->value[0] = 0x51;
+
+/*
+ * Sign backwards from other Force3d pro
+ * which get recast here in two's complement 8 bits
+ */
+		report->field[0]->value[1] = (unsigned char)(-x);
+		report->field[0]->value[31] = (unsigned char)(-y);
+
+		usbhid_submit_report(hid, report, USB_DIR_OUT);
+		break;
+	}
+	return 0;
+}
+static void hid_lg3ff_set_autocenter(struct input_dev *dev, u16 magnitude)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+
+/*
+ * Auto Centering probed from device
+ * NOTE: deadman's switch on G940 must be covered
+ * for effects to work
+ */
+	report->field[0]->value[0] = 0x51;
+	report->field[0]->value[1] = 0x00;
+	report->field[0]->value[2] = 0x00;
+	report->field[0]->value[3] = 0x7F;
+	report->field[0]->value[4] = 0x7F;
+	report->field[0]->value[31] = 0x00;
+	report->field[0]->value[32] = 0x00;
+	report->field[0]->value[33] = 0x7F;
+	report->field[0]->value[34] = 0x7F;
+
+	usbhid_submit_report(hid, report, USB_DIR_OUT);
+}
+
+
+static const signed short ff3_joystick_ac[] = {
+	FF_CONSTANT,
+	FF_AUTOCENTER,
+	-1
+};
+
+int lg3ff_init(struct hid_device *hid)
+{
+	struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct input_dev *dev = hidinput->input;
+	struct hid_report *report;
+	struct hid_field *field;
+	const signed short *ff_bits = ff3_joystick_ac;
+	int error;
+	int i;
+
+	/* Find the report to use */
+	if (list_empty(report_list)) {
+		err_hid("No output report found");
+		return -1;
+	}
+
+	/* Check that the report looks ok */
+	report = list_entry(report_list->next, struct hid_report, list);
+	if (!report) {
+		err_hid("NULL output report");
+		return -1;
+	}
+
+	field = report->field[0];
+	if (!field) {
+		err_hid("NULL field");
+		return -1;
+	}
+
+	/* Assume single fixed device G940 */
+	for (i = 0; ff_bits[i] >= 0; i++)
+		set_bit(ff_bits[i], dev->ffbit);
+
+	error = input_ff_create_memless(dev, NULL, hid_lg3ff_play);
+	if (error)
+		return error;
+
+	if (test_bit(FF_AUTOCENTER, dev->ffbit))
+		dev->ff->set_autocenter = hid_lg3ff_set_autocenter;
+
+	dev_info(&hid->dev, "Force feedback for Logitech Flight System G940 by "
+			"Gary Stein <LordCnidarian@gmail.com>\n");
+	return 0;
+}
+

drivers/hid/hid-lgff.c

@@ -67,6 +67,7 @@ static const struct dev_type devices[] = {
 	{ 0x046d, 0xc219, ff_rumble },
 	{ 0x046d, 0xc283, ff_joystick },
 	{ 0x046d, 0xc286, ff_joystick_ac },
+	{ 0x046d, 0xc287, ff_joystick_ac },
 	{ 0x046d, 0xc293, ff_joystick },
 	{ 0x046d, 0xc294, ff_wheel },
 	{ 0x046d, 0xc295, ff_joystick },

drivers/hid/hid-mosart.c

+/*
+ *  HID driver for the multitouch panel on the ASUS EeePC T91MT
+ *
+ *  Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
+ *  Copyright (c) 2010 Teemu Tuominen <teemu.tuominen@cybercom.com>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usbhid/usbhid.h"
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("MosArt dual-touch panel");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct mosart_data {
+	__u16 x, y;
+	__u8 id;
+	bool valid;		/* valid finger data, or just placeholder? */
+	bool first;		/* is this the first finger in this frame? */
+	bool activity_now;	/* at least one active finger in this frame? */
+	bool activity;		/* at least one active finger previously? */
+};
+
+static int mosart_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	switch (usage->hid & HID_USAGE_PAGE) {
+
+	case HID_UP_GENDESK:
+		switch (usage->hid) {
+		case HID_GD_X:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_X);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_X,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		case HID_GD_Y:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_Y);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_Y,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case HID_UP_DIGITIZER:
+		switch (usage->hid) {
+		case HID_DG_CONFIDENCE:
+		case HID_DG_TIPSWITCH:
+		case HID_DG_INPUTMODE:
+		case HID_DG_DEVICEINDEX:
+		case HID_DG_CONTACTCOUNT:
+		case HID_DG_CONTACTMAX:
+		case HID_DG_TIPPRESSURE:
+		case HID_DG_WIDTH:
+		case HID_DG_HEIGHT:
+			return -1;
+		case HID_DG_INRANGE:
+			/* touchscreen emulation */
+			hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+			return 1;
+
+		case HID_DG_CONTACTID:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TRACKING_ID);
+			return 1;
+
+		}
+		return 0;
+
+	case 0xff000000:
+		/* ignore HID features */
+		return -1;
+	}
+
+	return 0;
+}
+
+static int mosart_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	if (usage->type == EV_KEY || usage->type == EV_ABS)
+		clear_bit(usage->code, *bit);
+
+	return 0;
+}
+
+/*
+ * this function is called when a whole finger has been parsed,
+ * so that it can decide what to send to the input layer.
+ */
+static void mosart_filter_event(struct mosart_data *td, struct input_dev *input)
+{
+	td->first = !td->first; /* touchscreen emulation */
+
+	if (!td->valid) {
+		/*
+		 * touchscreen emulation: if no finger in this frame is valid
+		 * and there previously was finger activity, this is a release
+		 */ 
+		if (!td->first && !td->activity_now && td->activity) {
+			input_event(input, EV_KEY, BTN_TOUCH, 0);
+			td->activity = false;
+		}
+		return;
+	}
+
+	input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
+	input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
+	input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
+
+	input_mt_sync(input);
+	td->valid = false;
+
+	/* touchscreen emulation: if first active finger in this frame... */
+	if (!td->activity_now) {
+		/* if there was no previous activity, emit touch event */
+		if (!td->activity) {
+			input_event(input, EV_KEY, BTN_TOUCH, 1);
+			td->activity = true;
+		}
+		td->activity_now = true;
+		/* and in any case this is our preferred finger */
+		input_event(input, EV_ABS, ABS_X, td->x);
+		input_event(input, EV_ABS, ABS_Y, td->y);
+	}
+}
+
+
+static int mosart_event(struct hid_device *hid, struct hid_field *field,
+				struct hid_usage *usage, __s32 value)
+{
+	struct mosart_data *td = hid_get_drvdata(hid);
+
+	if (hid->claimed & HID_CLAIMED_INPUT) {
+		struct input_dev *input = field->hidinput->input;
+		switch (usage->hid) {
+		case HID_DG_INRANGE:
+			td->valid = !!value;
+			break;
+		case HID_GD_X:
+			td->x = value;
+			break;
+		case HID_GD_Y:
+			td->y = value;
+			mosart_filter_event(td, input);
+			break;
+		case HID_DG_CONTACTID:
+			td->id = value;
+			break;
+		case HID_DG_CONTACTCOUNT:
+			/* touch emulation: this is the last field in a frame */
+			td->first = false;
+			td->activity_now = false;
+			break;
+		case HID_DG_CONFIDENCE:
+		case HID_DG_TIPSWITCH:
+			/* avoid interference from generic hidinput handling */
+			break;
+
+		default:
+			/* fallback to the generic hidinput handling */
+			return 0;
+		}
+	}
+
+	/* we have handled the hidinput part, now remains hiddev */
+	if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+		hid->hiddev_hid_event(hid, field, usage, value);
+
+	return 1;
+}
+
+static int mosart_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct mosart_data *td;
+
+
+	td = kmalloc(sizeof(struct mosart_data), GFP_KERNEL);
+	if (!td) {
+		dev_err(&hdev->dev, "cannot allocate MosArt data\n");
+		return -ENOMEM;
+	}
+	td->valid = false;
+	td->activity = false;
+	td->activity_now = false;
+	td->first = false;
+	hid_set_drvdata(hdev, td);
+
+	/* currently, it's better to have one evdev device only */
+#if 0
+	hdev->quirks |= HID_QUIRK_MULTI_INPUT;
+#endif
+
+	ret = hid_parse(hdev);
+	if (ret == 0)
+		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+	if (ret == 0) {
+		struct hid_report_enum *re = hdev->report_enum
+						+ HID_FEATURE_REPORT;
+		struct hid_report *r = re->report_id_hash[7];
+
+		r->field[0]->value[0] = 0x02;
+		usbhid_submit_report(hdev, r, USB_DIR_OUT);
+	} else 
+		kfree(td);
+
+	return ret;
+}
+
+static void mosart_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+	hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id mosart_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, mosart_devices);
+
+static const struct hid_usage_id mosart_grabbed_usages[] = {
+	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver mosart_driver = {
+	.name = "mosart",
+	.id_table = mosart_devices,
+	.probe = mosart_probe,
+	.remove = mosart_remove,
+	.input_mapping = mosart_input_mapping,
+	.input_mapped = mosart_input_mapped,
+	.usage_table = mosart_grabbed_usages,
+	.event = mosart_event,
+};
+
+static int __init mosart_init(void)
+{
+	return hid_register_driver(&mosart_driver);
+}
+
+static void __exit mosart_exit(void)
+{
+	hid_unregister_driver(&mosart_driver);
+}
+
+module_init(mosart_init);
+module_exit(mosart_exit);
+

drivers/hid/hid-ntrig.c

@@ -25,11 +25,16 @@
 					EV_KEY, (c))
 
 struct ntrig_data {
-	__s32 x, y, id, w, h;
-	char reading_a_point, found_contact_id;
-	char pen_active;
-	char finger_active;
-	char inverted;
+	/* Incoming raw values for a single contact */
+	__u16 x, y, w, h;
+	__u16 id;
+	__u8 confidence;
+
+	bool reading_mt;
+	__u8 first_contact_confidence;
+
+	__u8 mt_footer[4];
+	__u8 mt_foot_count;
 };
 
 /*
@@ -42,8 +47,11 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
-	switch (usage->hid & HID_USAGE_PAGE) {
+	/* No special mappings needed for the pen and single touch */
+	if (field->physical)
+		return 0;
 
+	switch (usage->hid & HID_USAGE_PAGE) {
 	case HID_UP_GENDESK:
 		switch (usage->hid) {
 		case HID_GD_X:
@@ -66,18 +74,12 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 	case HID_UP_DIGITIZER:
 		switch (usage->hid) {
 		/* we do not want to map these for now */
-		case HID_DG_CONTACTID: /* value is useless */
+		case HID_DG_CONTACTID: /* Not trustworthy, squelch for now */
 		case HID_DG_INPUTMODE:
 		case HID_DG_DEVICEINDEX:
-		case HID_DG_CONTACTCOUNT:
 		case HID_DG_CONTACTMAX:
 			return -1;
 
-		/* original mapping by Rafi Rubin */
-		case HID_DG_CONFIDENCE:
-			nt_map_key_clear(BTN_TOOL_DOUBLETAP);
-			return 1;
-
 		/* width/height mapped on TouchMajor/TouchMinor/Orientation */
 		case HID_DG_WIDTH:
 			hid_map_usage(hi, usage, bit, max,
@@ -104,6 +106,10 @@ static int ntrig_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
+	/* No special mappings needed for the pen and single touch */
+	if (field->physical)
+		return 0;
+
 	if (usage->type == EV_KEY || usage->type == EV_REL
 			|| usage->type == EV_ABS)
 		clear_bit(usage->code, *bit);
@@ -123,31 +129,30 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
 	struct input_dev *input = field->hidinput->input;
 	struct ntrig_data *nd = hid_get_drvdata(hid);
 
+	/* No special handling needed for the pen */
+	if (field->application == HID_DG_PEN)
+		return 0;
+
         if (hid->claimed & HID_CLAIMED_INPUT) {
 		switch (usage->hid) {
-
-		case HID_DG_INRANGE:
-			if (field->application & 0x3)
-				nd->pen_active = (value != 0);
-			else
-				nd->finger_active = (value != 0);
-			return 0;
-
-		case HID_DG_INVERT:
-			nd->inverted = value;
-			return 0;
-
+		case 0xff000001:
+			/* Tag indicating the start of a multitouch group */
+			nd->reading_mt = 1;
+			nd->first_contact_confidence = 0;
+			break;
+		case HID_DG_CONFIDENCE:
+			nd->confidence = value;
+			break;
 		case HID_GD_X:
 			nd->x = value;
-			nd->reading_a_point = 1;
+			/* Clear the contact footer */
+			nd->mt_foot_count = 0;
 			break;
 		case HID_GD_Y:
 			nd->y = value;
 			break;
 		case HID_DG_CONTACTID:
 			nd->id = value;
-			/* we receive this only when in multitouch mode */
-			nd->found_contact_id = 1;
 			break;
 		case HID_DG_WIDTH:
 			nd->w = value;
@@ -159,35 +164,13 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
 			 * report received in a finger event. We want
 			 * to emit a normal (X, Y) position
 			 */
-			if (!nd->found_contact_id) {
-				if (nd->pen_active && nd->finger_active) {
-					input_report_key(input, BTN_TOOL_DOUBLETAP, 0);
-					input_report_key(input, BTN_TOOL_DOUBLETAP, 1);
-				}
+			if (!nd->reading_mt) {
+				input_report_key(input, BTN_TOOL_DOUBLETAP,
+						 (nd->confidence != 0));
 				input_event(input, EV_ABS, ABS_X, nd->x);
 				input_event(input, EV_ABS, ABS_Y, nd->y);
 			}
 			break;
-		case HID_DG_TIPPRESSURE:
-			/*
-			 * when in single touch mode, this is the last
-			 * report received in a pen event. We want
-			 * to emit a normal (X, Y) position
-			 */
-			if (! nd->found_contact_id) {
-				if (nd->pen_active && nd->finger_active) {
-					input_report_key(input,
-							nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN
-							, 0);
-					input_report_key(input,
-							nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN
-							, 1);
-				}
-				input_event(input, EV_ABS, ABS_X, nd->x);
-				input_event(input, EV_ABS, ABS_Y, nd->y);
-				input_event(input, EV_ABS, ABS_PRESSURE, value);
-			}
-			break;
 		case 0xff000002:
 			/*
 			 * we receive this when the device is in multitouch
@@ -195,10 +178,34 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
 			 * this usage tells if the contact point is real
 			 * or a placeholder
 			 */
-			if (!nd->reading_a_point || value != 1)
+
+			/* Shouldn't get more than 4 footer packets, so skip */
+			if (nd->mt_foot_count >= 4)
 				break;
+
+			nd->mt_footer[nd->mt_foot_count++] = value;
+
+			/* if the footer isn't complete break */
+			if (nd->mt_foot_count != 4)
+				break;
+
+			/* Pen activity signal, trigger end of touch. */
+			if (nd->mt_footer[2]) {
+				nd->confidence = 0;
+				break;
+			}
+
+			/* If the contact was invalid */
+			if (!(nd->confidence && nd->mt_footer[0])
+					|| nd->w <= 250
+					|| nd->h <= 190) {
+				nd->confidence = 0;
+				break;
+			}
+
 			/* emit a normal (X, Y) for the first point only */
 			if (nd->id == 0) {
+				nd->first_contact_confidence = nd->confidence;
 				input_event(input, EV_ABS, ABS_X, nd->x);
 				input_event(input, EV_ABS, ABS_Y, nd->y);
 			}
@@ -220,8 +227,39 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
 						ABS_MT_TOUCH_MINOR, nd->w);
 			}
 			input_mt_sync(field->hidinput->input);
-			nd->reading_a_point = 0;
-			nd->found_contact_id = 0;
+			break;
+
+		case HID_DG_CONTACTCOUNT: /* End of a multitouch group */
+			if (!nd->reading_mt)
+				break;
+
+			nd->reading_mt = 0;
+
+			if (nd->first_contact_confidence) {
+				switch (value) {
+				case 0:	/* for single touch devices */
+				case 1:
+					input_report_key(input,
+							BTN_TOOL_DOUBLETAP, 1);
+					break;
+				case 2:
+					input_report_key(input,
+							BTN_TOOL_TRIPLETAP, 1);
+					break;
+				case 3:
+				default:
+					input_report_key(input,
+							BTN_TOOL_QUADTAP, 1);
+				}
+				input_report_key(input, BTN_TOUCH, 1);
+			} else {
+				input_report_key(input,
+						BTN_TOOL_DOUBLETAP, 0);
+				input_report_key(input,
+						BTN_TOOL_TRIPLETAP, 0);
+				input_report_key(input,
+						BTN_TOOL_QUADTAP, 0);
+			}
 			break;
 
 		default:
@@ -231,8 +269,8 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
 	}
 
 	/* we have handled the hidinput part, now remains hiddev */
-        if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
-                hid->hiddev_hid_event(hid, field, usage, value);
+	if ((hid->claimed & HID_CLAIMED_HIDDEV) && hid->hiddev_hid_event)
+		hid->hiddev_hid_event(hid, field, usage, value);
 
 	return 1;
 }
@@ -241,23 +279,67 @@ static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
 	int ret;
 	struct ntrig_data *nd;
+	struct hid_input *hidinput;
+	struct input_dev *input;
+
+	if (id->driver_data)
+		hdev->quirks |= HID_QUIRK_MULTI_INPUT;
 
 	nd = kmalloc(sizeof(struct ntrig_data), GFP_KERNEL);
 	if (!nd) {
 		dev_err(&hdev->dev, "cannot allocate N-Trig data\n");
 		return -ENOMEM;
 	}
-	nd->reading_a_point = 0;
-	nd->found_contact_id = 0;
+
+	nd->reading_mt = 0;
 	hid_set_drvdata(hdev, nd);
 
 	ret = hid_parse(hdev);
-	if (!ret)
-		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		dev_err(&hdev->dev, "parse failed\n");
+		goto err_free;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+	if (ret) {
+		dev_err(&hdev->dev, "hw start failed\n");
+		goto err_free;
+	}
 
-	if (ret)
-		kfree (nd);
 
+	list_for_each_entry(hidinput, &hdev->inputs, list) {
+		input = hidinput->input;
+		switch (hidinput->report->field[0]->application) {
+		case HID_DG_PEN:
+			input->name = "N-Trig Pen";
+			break;
+		case HID_DG_TOUCHSCREEN:
+			__clear_bit(BTN_TOOL_PEN, input->keybit);
+			/*
+			 * A little something special to enable
+			 * two and three finger taps.
+			 */
+			__set_bit(BTN_TOOL_DOUBLETAP, input->keybit);
+			__set_bit(BTN_TOOL_TRIPLETAP, input->keybit);
+			__set_bit(BTN_TOOL_QUADTAP, input->keybit);
+			/*
+			 * The physical touchscreen (single touch)
+			 * input has a value for physical, whereas
+			 * the multitouch only has logical input
+			 * fields.
+			 */
+			input->name =
+				(hidinput->report->field[0]
+				 ->physical) ?
+				"N-Trig Touchscreen" :
+				"N-Trig MultiTouch";
+			break;
+		}
+	}
+
+	return 0;
+err_free:
+	kfree(nd);
 	return ret;
 }
 
@@ -276,7 +358,7 @@ MODULE_DEVICE_TABLE(hid, ntrig_devices);
 
 static const struct hid_usage_id ntrig_grabbed_usages[] = {
 	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
-	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1 }
 };
 
 static struct hid_driver ntrig_driver = {

drivers/hid/hid-ortek.c

+/*
+ *  HID driver for Ortek WKB-2000 (wireless keyboard + mouse trackpad).
+ *  Fixes LogicalMaximum error in USB report description, see
+ *  http://bugzilla.kernel.org/show_bug.cgi?id=14787
+ *
+ *  Copyright (c) 2010 Johnathon Harris <jmharris@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+static void ortek_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int rsize)
+{
+	if (rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x01) {
+		dev_info(&hdev->dev, "Fixing up Ortek WKB-2000 "
+				"report descriptor.\n");
+		rdesc[55] = 0x92;
+	}
+}
+
+static const struct hid_device_id ortek_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, ortek_devices);
+
+static struct hid_driver ortek_driver = {
+	.name = "ortek",
+	.id_table = ortek_devices,
+	.report_fixup = ortek_report_fixup
+};
+
+static int __init ortek_init(void)
+{
+	return hid_register_driver(&ortek_driver);
+}
+
+static void __exit ortek_exit(void)
+{
+	hid_unregister_driver(&ortek_driver);
+}
+
+module_init(ortek_init);
+module_exit(ortek_exit);
+MODULE_LICENSE("GPL");

drivers/hid/hid-quanta.c

+/*
+ *  HID driver for Quanta Optical Touch dual-touch panels
+ *
+ *  Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("Quanta dual-touch panel");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct quanta_data {
+	__u16 x, y;
+	__u8 id;
+	bool valid;		/* valid finger data, or just placeholder? */
+	bool first;		/* is this the first finger in this frame? */
+	bool activity_now;	/* at least one active finger in this frame? */
+	bool activity;		/* at least one active finger previously? */
+};
+
+static int quanta_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	switch (usage->hid & HID_USAGE_PAGE) {
+
+	case HID_UP_GENDESK:
+		switch (usage->hid) {
+		case HID_GD_X:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_X);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_X,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		case HID_GD_Y:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_Y);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_Y,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case HID_UP_DIGITIZER:
+		switch (usage->hid) {
+		case HID_DG_CONFIDENCE:
+		case HID_DG_TIPSWITCH:
+		case HID_DG_INPUTMODE:
+		case HID_DG_DEVICEINDEX:
+		case HID_DG_CONTACTCOUNT:
+		case HID_DG_CONTACTMAX:
+		case HID_DG_TIPPRESSURE:
+		case HID_DG_WIDTH:
+		case HID_DG_HEIGHT:
+			return -1;
+		case HID_DG_INRANGE:
+			/* touchscreen emulation */
+			hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+			return 1;
+		case HID_DG_CONTACTID:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TRACKING_ID);
+			return 1;
+		}
+		return 0;
+
+	case 0xff000000:
+		/* ignore vendor-specific features */
+		return -1;
+	}
+
+	return 0;
+}
+
+static int quanta_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	if (usage->type == EV_KEY || usage->type == EV_ABS)
+		clear_bit(usage->code, *bit);
+
+	return 0;
+}
+
+/*
+ * this function is called when a whole finger has been parsed,
+ * so that it can decide what to send to the input layer.
+ */
+static void quanta_filter_event(struct quanta_data *td, struct input_dev *input)
+{
+	
+	td->first = !td->first; /* touchscreen emulation */
+
+	if (!td->valid) {
+		/*
+		 * touchscreen emulation: if no finger in this frame is valid
+		 * and there previously was finger activity, this is a release
+		 */ 
+		if (!td->first && !td->activity_now && td->activity) {
+			input_event(input, EV_KEY, BTN_TOUCH, 0);
+			td->activity = false;
+		}
+		return;
+	}
+
+	input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
+	input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
+	input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
+
+	input_mt_sync(input);
+	td->valid = false;
+
+	/* touchscreen emulation: if first active finger in this frame... */
+	if (!td->activity_now) {
+		/* if there was no previous activity, emit touch event */
+		if (!td->activity) {
+			input_event(input, EV_KEY, BTN_TOUCH, 1);
+			td->activity = true;
+		}
+		td->activity_now = true;
+		/* and in any case this is our preferred finger */
+		input_event(input, EV_ABS, ABS_X, td->x);
+		input_event(input, EV_ABS, ABS_Y, td->y);
+	}
+}
+
+
+static int quanta_event(struct hid_device *hid, struct hid_field *field,
+				struct hid_usage *usage, __s32 value)
+{
+	struct quanta_data *td = hid_get_drvdata(hid);
+
+	if (hid->claimed & HID_CLAIMED_INPUT) {
+		struct input_dev *input = field->hidinput->input;
+
+		switch (usage->hid) {
+		case HID_DG_INRANGE:
+			td->valid = !!value;
+			break;
+		case HID_GD_X:
+			td->x = value;
+			break;
+		case HID_GD_Y:
+			td->y = value;
+			quanta_filter_event(td, input);
+			break;
+		case HID_DG_CONTACTID:
+			td->id = value;
+			break;
+		case HID_DG_CONTACTCOUNT:
+			/* touch emulation: this is the last field in a frame */
+			td->first = false;
+			td->activity_now = false;
+			break;
+		case HID_DG_CONFIDENCE:
+		case HID_DG_TIPSWITCH:
+			/* avoid interference from generic hidinput handling */
+			break;
+
+		default:
+			/* fallback to the generic hidinput handling */
+			return 0;
+		}
+	}
+
+	/* we have handled the hidinput part, now remains hiddev */
+	if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+		hid->hiddev_hid_event(hid, field, usage, value);
+
+	return 1;
+}
+
+static int quanta_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct quanta_data *td;
+
+	td = kmalloc(sizeof(struct quanta_data), GFP_KERNEL);
+	if (!td) {
+		dev_err(&hdev->dev, "cannot allocate Quanta Touch data\n");
+		return -ENOMEM;
+	}
+	td->valid = false;
+	td->activity = false;
+	td->activity_now = false;
+	td->first = false;
+	hid_set_drvdata(hdev, td);
+
+	ret = hid_parse(hdev);
+	if (!ret)
+		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+	if (ret)
+		kfree(td);
+
+	return ret;
+}
+
+static void quanta_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+	hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id quanta_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
+			USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
+			USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, quanta_devices);
+
+static const struct hid_usage_id quanta_grabbed_usages[] = {
+	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver quanta_driver = {
+	.name = "quanta-touch",
+	.id_table = quanta_devices,
+	.probe = quanta_probe,
+	.remove = quanta_remove,
+	.input_mapping = quanta_input_mapping,
+	.input_mapped = quanta_input_mapped,
+	.usage_table = quanta_grabbed_usages,
+	.event = quanta_event,
+};
+
+static int __init quanta_init(void)
+{
+	return hid_register_driver(&quanta_driver);
+}
+
+static void __exit quanta_exit(void)
+{
+	hid_unregister_driver(&quanta_driver);
+}
+
+module_init(quanta_init);
+module_exit(quanta_exit);
+

drivers/hid/hid-sony.c

@@ -48,7 +48,7 @@ static void sony_report_fixup(struct hid_device *hdev, __u8 *rdesc,
  * to "operational".  Without this, the ps3 controller will not report any
  * events.
  */
-static int sony_set_operational(struct hid_device *hdev)
+static int sony_set_operational_usb(struct hid_device *hdev)
 {
 	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
 	struct usb_device *dev = interface_to_usbdev(intf);
@@ -73,6 +73,12 @@ static int sony_set_operational(struct hid_device *hdev)
 	return ret;
 }
 
+static int sony_set_operational_bt(struct hid_device *hdev)
+{
+	unsigned char buf[] = { 0x53, 0xf4,  0x42, 0x03, 0x00, 0x00 };
+	return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT);
+}
+
 static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
 	int ret;
@@ -81,7 +87,7 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 	sc = kzalloc(sizeof(*sc), GFP_KERNEL);
 	if (sc == NULL) {
-		dev_err(&hdev->dev, "can't alloc apple descriptor\n");
+		dev_err(&hdev->dev, "can't alloc sony descriptor\n");
 		return -ENOMEM;
 	}
 
@@ -101,7 +107,17 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		goto err_free;
 	}
 
-	ret = sony_set_operational(hdev);
+	switch (hdev->bus) {
+	case BUS_USB:
+		ret = sony_set_operational_usb(hdev);
+		break;
+	case BUS_BLUETOOTH:
+		ret = sony_set_operational_bt(hdev);
+		break;
+	default:
+		ret = 0;
+	}
+
 	if (ret < 0)
 		goto err_stop;
 
@@ -121,6 +137,7 @@ static void sony_remove(struct hid_device *hdev)
 
 static const struct hid_device_id sony_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE),
 		.driver_data = VAIO_RDESC_CONSTANT },
 	{ }

drivers/hid/hid-stantum.c

+/*
+ *  HID driver for Stantum multitouch panels
+ *
+ *  Copyright (c) 2009 Stephane Chatty <chatty@enac.fr>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("Stantum HID multitouch panels");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct stantum_data {
+	__s32 x, y, z, w, h;	/* x, y, pressure, width, height */
+	__u16 id;		/* touch id */
+	bool valid;		/* valid finger data, or just placeholder? */
+	bool first;		/* first finger in the HID packet? */
+	bool activity;		/* at least one active finger so far? */
+};
+
+static int stantum_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	switch (usage->hid & HID_USAGE_PAGE) {
+
+	case HID_UP_GENDESK:
+		switch (usage->hid) {
+		case HID_GD_X:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_X);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_X,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		case HID_GD_Y:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_Y);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_Y,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case HID_UP_DIGITIZER:
+		switch (usage->hid) {
+		case HID_DG_INRANGE:
+		case HID_DG_CONFIDENCE:
+		case HID_DG_INPUTMODE:
+		case HID_DG_DEVICEINDEX:
+		case HID_DG_CONTACTCOUNT:
+		case HID_DG_CONTACTMAX:
+			return -1;
+
+		case HID_DG_TIPSWITCH:
+			/* touchscreen emulation */
+			hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+			return 1;
+
+		case HID_DG_WIDTH:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TOUCH_MAJOR);
+			return 1;
+		case HID_DG_HEIGHT:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TOUCH_MINOR);
+			input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
+					1, 1, 0, 0);
+			return 1;
+		case HID_DG_TIPPRESSURE:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_PRESSURE);
+			return 1;
+
+		case HID_DG_CONTACTID:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TRACKING_ID);
+			return 1;
+
+		}
+		return 0;
+
+	case 0xff000000:
+		/* no input-oriented meaning */
+		return -1;
+	}
+
+	return 0;
+}
+
+static int stantum_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	if (usage->type == EV_KEY || usage->type == EV_ABS)
+		clear_bit(usage->code, *bit);
+
+	return 0;
+}
+
+/*
+ * this function is called when a whole finger has been parsed,
+ * so that it can decide what to send to the input layer.
+ */
+static void stantum_filter_event(struct stantum_data *sd,
+					struct input_dev *input)
+{
+	bool wide;
+
+	if (!sd->valid) {
+		/*
+		 * touchscreen emulation: if the first finger is not valid and
+		 * there previously was finger activity, this is a release
+		 */
+		if (sd->first && sd->activity) {
+			input_event(input, EV_KEY, BTN_TOUCH, 0);
+			sd->activity = false;
+		}
+		return;
+	}
+
+	input_event(input, EV_ABS, ABS_MT_TRACKING_ID, sd->id);
+	input_event(input, EV_ABS, ABS_MT_POSITION_X, sd->x);
+	input_event(input, EV_ABS, ABS_MT_POSITION_Y, sd->y);
+
+	wide = (sd->w > sd->h);
+	input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
+	input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, wide ? sd->w : sd->h);
+	input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, wide ? sd->h : sd->w);
+
+	input_event(input, EV_ABS, ABS_MT_PRESSURE, sd->z);
+
+	input_mt_sync(input);
+	sd->valid = false;
+
+	/* touchscreen emulation */
+	if (sd->first) {
+		if (!sd->activity) {
+			input_event(input, EV_KEY, BTN_TOUCH, 1);
+			sd->activity = true;
+		}
+		input_event(input, EV_ABS, ABS_X, sd->x);
+		input_event(input, EV_ABS, ABS_Y, sd->y);
+	}
+	sd->first = false;
+}
+
+
+static int stantum_event(struct hid_device *hid, struct hid_field *field,
+				struct hid_usage *usage, __s32 value)
+{
+	struct stantum_data *sd = hid_get_drvdata(hid);
+
+	if (hid->claimed & HID_CLAIMED_INPUT) {
+		struct input_dev *input = field->hidinput->input;
+
+		switch (usage->hid) {
+		case HID_DG_INRANGE:
+			/* this is the last field in a finger */
+			stantum_filter_event(sd, input);
+			break;
+		case HID_DG_WIDTH:
+			sd->w = value;
+			break;
+		case HID_DG_HEIGHT:
+			sd->h = value;
+			break;
+		case HID_GD_X:
+			sd->x = value;
+			break;
+		case HID_GD_Y:
+			sd->y = value;
+			break;
+		case HID_DG_TIPPRESSURE:
+			sd->z = value;
+			break;
+		case HID_DG_CONTACTID:
+			sd->id = value;
+			break;
+		case HID_DG_CONFIDENCE:
+			sd->valid = !!value;
+			break;
+		case 0xff000002:
+			/* this comes only before the first finger */
+			sd->first = true;
+			break;
+
+		default:
+			/* ignore the others */
+			return 1;
+		}
+	}
+
+	/* we have handled the hidinput part, now remains hiddev */
+	if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+		hid->hiddev_hid_event(hid, field, usage, value);
+
+	return 1;
+}
+
+static int stantum_probe(struct hid_device *hdev,
+				const struct hid_device_id *id)
+{
+	int ret;
+	struct stantum_data *sd;
+
+	sd = kmalloc(sizeof(struct stantum_data), GFP_KERNEL);
+	if (!sd) {
+		dev_err(&hdev->dev, "cannot allocate Stantum data\n");
+		return -ENOMEM;
+	}
+	sd->valid = false;
+	sd->first = false;
+	sd->activity = false;
+	hid_set_drvdata(hdev, sd);
+
+	ret = hid_parse(hdev);
+	if (!ret)
+		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+	if (ret)
+		kfree(sd);
+
+	return ret;
+}
+
+static void stantum_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+	hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id stantum_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, stantum_devices);
+
+static const struct hid_usage_id stantum_grabbed_usages[] = {
+	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver stantum_driver = {
+	.name = "stantum",
+	.id_table = stantum_devices,
+	.probe = stantum_probe,
+	.remove = stantum_remove,
+	.input_mapping = stantum_input_mapping,
+	.input_mapped = stantum_input_mapped,
+	.usage_table = stantum_grabbed_usages,
+	.event = stantum_event,
+};
+
+static int __init stantum_init(void)
+{
+	return hid_register_driver(&stantum_driver);
+}
+
+static void __exit stantum_exit(void)
+{
+	hid_unregister_driver(&stantum_driver);
+}
+
+module_init(stantum_init);
+module_exit(stantum_exit);
+

drivers/hid/hid-wacom.c

@@ -156,7 +156,9 @@ static int wacom_probe(struct hid_device *hdev,
 	struct hid_input *hidinput;
 	struct input_dev *input;
 	struct wacom_data *wdata;
+	char rep_data[2];
 	int ret;
+	int limit;
 
 	wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
 	if (wdata == NULL) {
@@ -166,6 +168,7 @@ static int wacom_probe(struct hid_device *hdev,
 
 	hid_set_drvdata(hdev, wdata);
 
+	/* Parse the HID report now */
 	ret = hid_parse(hdev);
 	if (ret) {
 		dev_err(&hdev->dev, "parse failed\n");
@@ -178,6 +181,31 @@ static int wacom_probe(struct hid_device *hdev,
 		goto err_free;
 	}
 
+	/*
+	 * Note that if the raw queries fail, it's not a hard failure and it
+	 * is safe to continue
+	 */
+
+	/* Set Wacom mode2 */
+	rep_data[0] = 0x03; rep_data[1] = 0x00;
+	limit = 3;
+	do {
+		ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+				HID_FEATURE_REPORT);
+	} while (ret < 0 && limit-- > 0);
+	if (ret < 0)
+		dev_warn(&hdev->dev, "failed to poke device #1, %d\n", ret);
+
+	/* 0x06 - high reporting speed, 0x05 - low speed */
+	rep_data[0] = 0x06; rep_data[1] = 0x00;
+	limit = 3;
+	do {
+		ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+				HID_FEATURE_REPORT);
+	} while (ret < 0 && limit-- > 0);
+	if (ret < 0)
+		dev_warn(&hdev->dev, "failed to poke device #2, %d\n", ret);
+
 	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
 	input = hidinput->input;
 

drivers/hid/hidraw.c

@@ -134,7 +134,7 @@ static ssize_t hidraw_write(struct file *file, const char __user *buffer, size_t
 		goto out;
 	}
 
-	ret = dev->hid_output_raw_report(dev, buf, count);
+	ret = dev->hid_output_raw_report(dev, buf, count, HID_OUTPUT_REPORT);
 out:
 	kfree(buf);
 	return ret;

drivers/hid/usbhid/hid-core.c

@@ -5,7 +5,7 @@
  *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
  *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
  *  Copyright (c) 2007-2008 Oliver Neukum
- *  Copyright (c) 2006-2009 Jiri Kosina
+ *  Copyright (c) 2006-2010 Jiri Kosina
  */
 
 /*
@@ -316,6 +316,7 @@ static int hid_submit_out(struct hid_device *hid)
 			err_hid("usb_submit_urb(out) failed");
 			return -1;
 		}
+		usbhid->last_out = jiffies;
 	} else {
 		/*
 		 * queue work to wake up the device.
@@ -377,6 +378,7 @@ static int hid_submit_ctrl(struct hid_device *hid)
 			err_hid("usb_submit_urb(ctrl) failed");
 			return -1;
 		}
+		usbhid->last_ctrl = jiffies;
 	} else {
 		/*
 		 * queue work to wake up the device.
@@ -512,9 +514,20 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re
 		usbhid->out[usbhid->outhead].report = report;
 		usbhid->outhead = head;
 
-		if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl))
+		if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl)) {
 			if (hid_submit_out(hid))
 				clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
+		} else {
+			/*
+			 * the queue is known to run
+			 * but an earlier request may be stuck
+			 * we may need to time out
+			 * no race because this is called under
+			 * spinlock
+			 */
+			if (time_after(jiffies, usbhid->last_out + HZ * 5))
+				usb_unlink_urb(usbhid->urbout);
+		}
 		return;
 	}
 
@@ -535,9 +548,20 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re
 	usbhid->ctrl[usbhid->ctrlhead].dir = dir;
 	usbhid->ctrlhead = head;
 
-	if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl))
+	if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl)) {
 		if (hid_submit_ctrl(hid))
 			clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
+	} else {
+		/*
+		 * the queue is known to run
+		 * but an earlier request may be stuck
+		 * we may need to time out
+		 * no race because this is called under
+		 * spinlock
+		 */
+		if (time_after(jiffies, usbhid->last_ctrl + HZ * 5))
+			usb_unlink_urb(usbhid->urbctrl);
+	}
 }
 
 void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
@@ -774,7 +798,8 @@ static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid)
 	return 0;
 }
 
-static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count)
+static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count,
+		unsigned char report_type)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
 	struct usb_device *dev = hid_to_usb_dev(hid);
@@ -785,7 +810,7 @@ static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t co
 	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 		HID_REQ_SET_REPORT,
 		USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-		((HID_OUTPUT_REPORT + 1) << 8) | *buf,
+		((report_type + 1) << 8) | *buf,
 		interface->desc.bInterfaceNumber, buf + 1, count - 1,
 		USB_CTRL_SET_TIMEOUT);
 
@@ -981,9 +1006,6 @@ static int usbhid_start(struct hid_device *hid)
 
 	spin_lock_init(&usbhid->lock);
 
-	usbhid->intf = intf;
-	usbhid->ifnum = interface->desc.bInterfaceNumber;
-
 	usbhid->urbctrl = usb_alloc_urb(0, GFP_KERNEL);
 	if (!usbhid->urbctrl) {
 		ret = -ENOMEM;
@@ -1154,6 +1176,8 @@ static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id *
 
 	hid->driver_data = usbhid;
 	usbhid->hid = hid;
+	usbhid->intf = intf;
+	usbhid->ifnum = interface->desc.bInterfaceNumber;
 
 	ret = hid_add_device(hid);
 	if (ret) {
@@ -1342,7 +1366,7 @@ static int hid_reset_resume(struct usb_interface *intf)
 
 #endif /* CONFIG_PM */
 
-static struct usb_device_id hid_usb_ids [] = {
+static const struct usb_device_id hid_usb_ids[] = {
 	{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
 		.bInterfaceClass = USB_INTERFACE_CLASS_HID },
 	{ }						/* Terminating entry */

drivers/hid/usbhid/hid-quirks.c

@@ -43,8 +43,10 @@ static const struct hid_blacklist {
 
 	{ USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9016, HID_QUIRK_FULLSPEED_INTERVAL },
 
+	{ USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
 	{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT },
 
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
@@ -57,6 +59,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT },

drivers/hid/usbhid/usbhid.h

@@ -80,12 +80,14 @@ struct usbhid_device {
 	unsigned char ctrlhead, ctrltail;                               /* Control fifo head & tail */
 	char *ctrlbuf;                                                  /* Control buffer */
 	dma_addr_t ctrlbuf_dma;                                         /* Control buffer dma */
+	unsigned long last_ctrl;						/* record of last output for timeouts */
 
 	struct urb *urbout;                                             /* Output URB */
 	struct hid_output_fifo out[HID_CONTROL_FIFO_SIZE];              /* Output pipe fifo */
 	unsigned char outhead, outtail;                                 /* Output pipe fifo head & tail */
 	char *outbuf;                                                   /* Output buffer */
 	dma_addr_t outbuf_dma;                                          /* Output buffer dma */
+	unsigned long last_out;							/* record of last output for timeouts */
 
 	spinlock_t lock;						/* fifo spinlock */
 	unsigned long iofl;                                             /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */

include/linux/hid.h

@@ -501,7 +501,7 @@ struct hid_device {							/* device report descriptor */
 	void (*hiddev_report_event) (struct hid_device *, struct hid_report *);
 
 	/* handler for raw output data, used by hidraw */
-	int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t);
+	int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t, unsigned char);
 
 	/* debugging support via debugfs */
 	unsigned short debug;
@@ -663,7 +663,7 @@ struct hid_ll_driver {
 
 /* Applications from HID Usage Tables 4/8/99 Version 1.1 */
 /* We ignore a few input applications that are not widely used */
-#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || (a == 0x000d0002))
+#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || ((a >= 0x000d0002) && (a <= 0x000d0006)))
 
 /* HID core API */
 
@@ -690,6 +690,7 @@ int hid_input_report(struct hid_device *, int type, u8 *, int, int);
 int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field);
 void hid_output_report(struct hid_report *report, __u8 *data);
 struct hid_device *hid_allocate_device(void);
+struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
 int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size);
 int hid_check_keys_pressed(struct hid_device *hid);
 int hid_connect(struct hid_device *hid, unsigned int connect_mask);

include/linux/input.h

@@ -598,6 +598,48 @@ struct input_absinfo {
 
 #define KEY_CAMERA_FOCUS	0x210
 
+#define BTN_TRIGGER_HAPPY		0x2c0
+#define BTN_TRIGGER_HAPPY1		0x2c0
+#define BTN_TRIGGER_HAPPY2		0x2c1
+#define BTN_TRIGGER_HAPPY3		0x2c2
+#define BTN_TRIGGER_HAPPY4		0x2c3
+#define BTN_TRIGGER_HAPPY5		0x2c4
+#define BTN_TRIGGER_HAPPY6		0x2c5
+#define BTN_TRIGGER_HAPPY7		0x2c6
+#define BTN_TRIGGER_HAPPY8		0x2c7
+#define BTN_TRIGGER_HAPPY9		0x2c8
+#define BTN_TRIGGER_HAPPY10		0x2c9
+#define BTN_TRIGGER_HAPPY11		0x2ca
+#define BTN_TRIGGER_HAPPY12		0x2cb
+#define BTN_TRIGGER_HAPPY13		0x2cc
+#define BTN_TRIGGER_HAPPY14		0x2cd
+#define BTN_TRIGGER_HAPPY15		0x2ce
+#define BTN_TRIGGER_HAPPY16		0x2cf
+#define BTN_TRIGGER_HAPPY17		0x2d0
+#define BTN_TRIGGER_HAPPY18		0x2d1
+#define BTN_TRIGGER_HAPPY19		0x2d2
+#define BTN_TRIGGER_HAPPY20		0x2d3
+#define BTN_TRIGGER_HAPPY21		0x2d4
+#define BTN_TRIGGER_HAPPY22		0x2d5
+#define BTN_TRIGGER_HAPPY23		0x2d6
+#define BTN_TRIGGER_HAPPY24		0x2d7
+#define BTN_TRIGGER_HAPPY25		0x2d8
+#define BTN_TRIGGER_HAPPY26		0x2d9
+#define BTN_TRIGGER_HAPPY27		0x2da
+#define BTN_TRIGGER_HAPPY28		0x2db
+#define BTN_TRIGGER_HAPPY29		0x2dc
+#define BTN_TRIGGER_HAPPY30		0x2dd
+#define BTN_TRIGGER_HAPPY31		0x2de
+#define BTN_TRIGGER_HAPPY32		0x2df
+#define BTN_TRIGGER_HAPPY33		0x2e0
+#define BTN_TRIGGER_HAPPY34		0x2e1
+#define BTN_TRIGGER_HAPPY35		0x2e2
+#define BTN_TRIGGER_HAPPY36		0x2e3
+#define BTN_TRIGGER_HAPPY37		0x2e4
+#define BTN_TRIGGER_HAPPY38		0x2e5
+#define BTN_TRIGGER_HAPPY39		0x2e6
+#define BTN_TRIGGER_HAPPY40		0x2e7
+
 /* We avoid low common keys in module aliases so they don't get huge. */
 #define KEY_MIN_INTERESTING	KEY_MUTE
 #define KEY_MAX			0x2ff

net/bluetooth/hidp/core.c

@@ -313,10 +313,21 @@ static int hidp_send_report(struct hidp_session *session, struct hid_report *rep
 	return hidp_queue_report(session, buf, rsize);
 }
 
-static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count)
+static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count,
+		unsigned char report_type)
 {
-	if (hidp_send_ctrl_message(hid->driver_data,
-			HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE,
+	switch (report_type) {
+	case HID_FEATURE_REPORT:
+		report_type = HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE;
+		break;
+	case HID_OUTPUT_REPORT:
+		report_type = HIDP_TRANS_DATA | HIDP_DATA_RTYPE_OUPUT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (hidp_send_ctrl_message(hid->driver_data, report_type,
 			data, count))
 		return -ENOMEM;
 	return count;